提交 6e7d4de1 编写于 作者: W Wolfram Sang 提交者: Ulf Hansson

mmc: renesas_sdhi: move wrong 'hw_reset' to 'reset'

This driver got the usage of 'hw_reset' wrong and missed that it is used
to reset the remote HW (card) only, not the local one (controller). Move
everything to the proper 'reset' callback. Also, add the generic reset
code from TMIO, so we will ensure the same behaviour (it will get
refactored away in a later patch). This also means we need to drop
MMC_CAP_HW_RESET because this is currently not supported by our
hardware.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20200820132538.24758-2-wsa+renesas@sang-engineering.comSigned-off-by: NUlf Hansson <ulf.hansson@linaro.org>
上级 7ca0f166
......@@ -631,11 +631,20 @@ static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host)
return renesas_sdhi_manual_correction(host, use_4tap);
}
static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
static void renesas_sdhi_reset(struct tmio_mmc_host *host)
{
struct renesas_sdhi *priv;
struct renesas_sdhi *priv = host_to_priv(host);
priv = host_to_priv(host);
/* FIXME - should we set stop clock reg here */
sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
usleep_range(10000, 11000);
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
usleep_range(10000, 11000);
if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
}
renesas_sdhi_reset_scc(host, priv);
renesas_sdhi_reset_hs400_mode(host, priv);
......@@ -862,11 +871,9 @@ int renesas_sdhi_probe(struct platform_device *pdev,
renesas_sdhi_start_signal_voltage_switch;
host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27;
/* SDR and HS200/400 registers requires HW reset */
if (of_data && of_data->scc_offset) {
priv->scc_ctl = host->ctl + of_data->scc_offset;
host->mmc->caps |= MMC_CAP_HW_RESET;
host->hw_reset = renesas_sdhi_hw_reset;
host->reset = renesas_sdhi_reset;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册