- 24 2月, 2010 1 次提交
-
-
由 Michal Simek 提交于
I create wrong asm code but none test shows that this part of code is wrong. I am not convinces that were good idea to create asm optimized macros for caches. The reason is that there is not optimization with previous code that's why make sense to add old code and do some benchmarking which functions are faster. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 08 2月, 2010 1 次提交
-
-
由 Michal Simek 提交于
We found that on write-trough kernel is necessary to do that invalidation. One WB is possible to use invalidation too. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 03 2月, 2010 1 次提交
-
-
由 Steven J. Magnani 提交于
Interrupts must be disabled while an interrupt state restore (prep for interrupt return) is in progress. Code to do this was lost in the port to the mainline kernel. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 18 1月, 2010 2 次提交
-
-
由 Michal Simek 提交于
we are follow powerpc change: 44ef3390Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
We had wrong name in unistd.h + I wire up this syscall in syscall table. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 15 12月, 2009 1 次提交
-
-
由 Thomas Gleixner 提交于
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NIngo Molnar <mingo@elte.hu>
-
- 14 12月, 2009 31 次提交
-
-
由 Michal Simek 提交于
Generic rt_sigsuspend syscalls doesn't need any asm wrapper. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 steve@digidescorp.com 提交于
The noMMU syscall trap has a bug that causes R11 to be zero on return to userland. Remove the extra "save" of R11 responsible for the bug. Remove reloading of mode indicator because r11 already contains it. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Microblaze version 7.20.d is the first MB version which can be run on MMU linux. Please do not used previous version because they contain HW bug. Based on WB support was necessary to redesign whole cache design. Microblaze versions from 7.20.a don't need to disable IRQ and cache before working with them that's why there are special structures for it. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Microblaze v7.30.a will have 0x10 version string. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
We need to continue with next microblaze PVR version that's why I have to remove that ancient version. These version strings not match any versions. From Microblaze v5.00.a is possible to use this style. I believe that none use ancients versions. If yes they will be just labeled as unknown version. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
panic_timeout is in BSS section and it is cleared with BSS section. This means that value is setup to 0. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
There is not necessary to count system calls that's why I added DEBUG macro Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 steve@digidescorp.com 提交于
Level interrupts need to be ack'd in the unmask handler, as in powerpc. Among other issues, this bug causes the system clock to appear to run at double-speed. Signed-off-by: NSteven J. Magnani <steve@digidescorp.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Futimesat was disabled. LTP testing shows that MB has no problem with this syscall. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
WB cache has special flag in PVR. There is added checking mechanism for PVR and DTS. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 John Linn 提交于
The device tree handling for the gpio in the heart beat was not handling the system when there was no gpio and it wasn't working with a newer version of the gpio core which does not have the is-bidir property. Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
After the signal frame is set up on the userspace stack, ptrace() should be given an opportunity to single-step into the signal handler FRV, Blackfin, mn10300 and UM. Worth to look at that patches. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
There is missing checking agains PVR but this is not important for now. There are some missing checking too. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
We used cache_line as cache_line_lenght. For this reason we did cache flushing 4 times longer than was necessary. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Till this patch reset always perform writen to 1. Now we can use negative logic and perform reset write to 0. It is opposite level than is currently read from that pin Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
I had to change message for gpio-reset because I always not to see it. Prefix RESET is big and visible. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Saving is done in SAVE_STATE macros that's why another save discard previous saved value. This change has no effect to normal programs because they ends in any exception and they are killed. On the other side has effect on debugging. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
This patch add support for dynamic function graph tracer. There is one my expactation that I can do flush_icache after all code modification. On microblaze is this safer than do flush for every entry. For icache is used name flush but correct should be invalidation - this will be fix in upcomming new cache implementaion and WB support. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
For more information look at Documentation/trace folder. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
With dynamic function tracer, by default, _mcount is defined as an "empty" function, it returns directly without any more action. When enabling it in user-space, it will jump to a real tracing function(ftrace_caller), and do the real job for us. Differ from the static function tracer, dynamic function tracer provides two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the tracing of some indicated kernel functions(set_ftrace_filter). In the kernel version, there is only one "_mcount" string for every kernel function, so, we just need to match this one in mcount_regex of scripts/recordmcount.pl. For more information please look at code and Documentation/trace folder. Steven ACK that scripts/recordmcount.pl part. Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Implement MCOUNT_TEST in asm code - it is faster than use generic code Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to _mcount will be inserted into each kernel function. so, there is a possibility to trace the kernel functions in _mcount. This patch add the specific _mcount support for static function tracing. by default, ftrace_trace_function is initialized as ftrace_stub(an empty function), so, the default _mcount will introduce very little overhead. after enabling ftrace in user-space, it will jump to a real tracing function and do static function tracing for us. Commit message from Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
There are just two major changes Renamed local_irq functions to raw_local_irq in irq.c. Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug. Look at Documentation/irqflags-tracing.txt Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Microblaze needs to do lock_init very soon because MMU init calls lock functions. Here is the explanation from Peter Zijlstra why we have to enable __ARCH_WANTS_INTERRUPTS_ON_CTSW. "So we schedule while holding rq->lock (for obvious reasons), but since lockdep tracks held locks per tasks, we need to transfer the held state from the prev to the next task. We do this by explicity calling spin_release(&rq->lock) in context_switch() right before switch_to(), and calling spin_acquire(&rq->lock) in finish_task_switch()->finish_lock_switch(). Now, for some reason lockdep thinks that interrupts got enabled over the context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze doesn't seem to turn up anything). Clearly trying to acquire the rq->lock with interrupts enabled is a bad idea and lockdep warns you about this." Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
It is the same counter as we use as free running one. I would like to use it for ftrace. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
This is working implemetation but the problem is that Microblaze misses frame pointer that's why is there big loop which trace and show all addresses which are in text. It shows addresses which are in registers, etc. This is problem and this is the reason why all Microblaze traces are wrong. There is an option to do hacks and trace the kernel code but this is too complicated. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
It is important for ftrace irqsoff support Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
The problem was that free_initmem pass to free_initrd_mem got bad aligned __init_begin symbol and free_initrd_mem don't care about __init_end but take PAGE_SIZE instead. Here is behavior in kernel bootlog. ramdisk_execute_command from (init/main.c) was rewrite Freeing unused kernel memory: 6224k freed Failed to execute ��������������{��� Failed to execute ��������������{����. Attempting defaults... Mounting proc: Mounting var: Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
- 11 12月, 2009 1 次提交
-
-
由 Al Viro 提交于
New helper - sys_mmap_pgoff(); switch syscalls to using it. Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 16 10月, 2009 2 次提交
-
-
由 Grant Likely 提交于
Merge common code between Microblaze and PowerPC, and make it available to Sparc Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMichal Simek <monstr@monstr.eu> Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Grant Likely 提交于
Add a common header file for working with the flattened device tree data structure and merge the shared data tags used by Microblaze and PowerPC Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMichal Simek <monstr@monstr.eu> Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
-