Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We found that on write-trough kernel is necessary to do that invalidation.
One WB is possible to use invalidation too.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Interrupts must be disabled while an interrupt state restore
(prep for interrupt return) is in progress.
Code to do this was lost in the port to the mainline kernel.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

There were several changes in Microblaze defconfig that's why
is good to update defconfigs.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

we are follow powerpc change:
44ef3390Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

PT_ macros are used by gdb and strace uses them too.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We had wrong name in unistd.h + I wire up this syscall
in syscall table.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Patch a2e27255 should
contain change in unistd.h too. The same problem
had MIPS.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Currently all architectures but microblaze unconditionally define
USE_ELF_CORE_DUMP.  The microblaze omission seems like an error to me, so
let's kill this ifdef and make sure we are the same everywhere.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NHugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Simek <michal.simek@petalogix.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NIngo Molnar <mingo@elte.hu>

Generic rt_sigsuspend syscalls doesn't need any asm wrapper.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.

Remove reloading of mode indicator because r11 already contains it.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze v7.30.a will have 0x10 version string.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

There is not necessary to count system calls that's why
I added DEBUG macro
Signed-off-by: NMichal Simek <monstr@monstr.eu>

For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Level interrupts need to be ack'd in the unmask handler, as in powerpc.
Among other issues, this bug causes the system clock to appear to run at
double-speed.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Futimesat was disabled. LTP testing shows that MB has no
problem with this syscall.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

WB cache has special flag in PVR. There is added checking mechanism
for PVR and DTS.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

just file cleanup
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Microblaze v7.20 provides new lwx, swx instructions which bring
possibility to implement lock rutines.

There are some tests in open posix thread LTP part but current
toolchain not support it.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

The functions, dev_arch_data_set_node and get_node are missing
and are needed by some device drivers such as I2C.
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

The device tree handling for the gpio in the heart beat was not handling
the system when there was no gpio and it wasn't working with a newer version
of the gpio core which does not have the is-bidir property.
Signed-off-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This is first patch which clear part of uaccess.h.
uaccess.h will be clear later.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

memory_start symbol is needed by kernel modules.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This will ensure that kernels built with no custom CPU settings will still boot
OK on hardware that has additional CPU hardware instructions etc.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

It is generated with longer compatible list
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Asm code uses barrel-shifter instruction that's why we have
to protect cases when HW don't have it.
Reported-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This was intended to allow manual override of CPU settings copied automatically
to Kconfig.auto, however it's problematic for several reasons, but mostly:

  * If the defconfig doesn't have ALLOW_EDIT_AUTO=y, then it's impossible for
    that defconfig to iverride the values in the kernel source tree.  This leads
    to very strange errors where the kernel is compiled with the wrong CPUFLAGS.

Next patch in the series will back out the default in Kconfig.auto to baseline
settings, so a kernel built with no default values will at least boot on any
hardware, just not make use of additional CPU features.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Two version are generated.
linux.bin.ub which is created from linux.bin file
and
simpleImage.<dts>.ub which is created from stripped simpleImage.<dts> file

Load address and entry point is for microblaze first instruction
which is CONFIG_KERNEL_BASE_ADDR variable.

There is possible for simpleImage format parse _start symbol too.

simpleImage.<dts> is still stripped elf file

I cleared simpleImage.<dts>.unstrip file because there are so big.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

After the signal frame is set up on the userspace stack, ptrace() should
be given an opportunity to single-step into the signal handler

FRV, Blackfin, mn10300 and UM. Worth to look at that patches.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

There is missing checking agains PVR but this is not important
for now. There are some missing checking too.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.
Signed-off-by: NMichal Simek <monstr@monstr.eu>