Add prototypes and includes for functions used in different modules.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix prototype of some functions in arch/s390/oprofile to avoid non-ANSI
warnings from sparse.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make functions and data static to avoid sparse warnings.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove unnecessary code to avoid false positives from sparse, e.g.

arch/s390/kernel/compat_signal.c:221:61: warning: invalid access past the end of 'set32' (8 8)
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add get_clock_fast() which uses the slightly faster stckf if available.
If stckf is not available fall back to stck, which has the same width.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Linux on System z uses a ballooner based on diagnose 0x10. (aka as
collaborative memory management). This patch implements diagnose
0x10 on the guest address space.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

gmap_fault needs to walk the guest page table. However, parts of
that may change if some other thread does munmap. In that case
gmap_unmap_notifier will also unmap the corresponding parts from
the guest page table. We need to take mmap_sem in order to serialize
these operations.
do_exception now calls __gmap_fault with mmap_sem held which does
not get exported to modules. The exported function, which is called
from KVM, now takes mmap_sem.
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This introduces locking via mm->page_table_lock to protect
the rmap list for guest mappings from being corrupted by concurrent
operations.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix possible deadlock reported by lockdep:
qemu-system-s39/2963 is trying to acquire lock:
(&mm->mmap_sem){++++++}, at: gmap_alloc_table+0x9c/0x120
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: gmap_map_segment+0xa6/0x27c

Actually gmap_alloc_table is the only called in gmap_map_segment with
mmap_sem held, thus it's safe to simply remove the inner lock.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

On sie_fault we need to switch back to user ASCE. Otherwise we get
interresting effects when exiting to "userspace" while the guest
space is still active.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use a sigp sense running to decide which signal processor order to use
for an ipi. If the target cpu is running use external call, if the target
cpu is not running use emergency signal.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add support for CHSC I/O interrupt statistics in /proc/interrupts.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The user space program can change its addressing mode between the
24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently
the kernel always forces the standard amode on signal delivery and
signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for
a compat process and 31-bit kernels. Change the signal and ptrace code
to allow the full range of addressing modes. Signal handlers are
run in the standard addressing mode for the process.

One caveat is that even an 31-bit compat process can switch to the
64-bit mode. The next signal will switch back into the 31-bit mode
and there is no room in the 31-bit compat signal frame to store the
information that the program came from the 64-bit mode.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS
to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function
enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros.
Change psw_kernel_bits / psw_user_bits to contain only the bits that
are always set in the respective mode.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add an explicit TIF_SYSCALL bit that indicates if a task is inside
a system call. The svc_code in the pt_regs structure is now only
valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC
can be replaced with TIF_SYSCALL. Overall do_signal is a bit more
readable and it saves a few lines of code.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

An instruction with an address right below the adress limit for the
current addressing mode will wrap. The instruction restart logic in
the protection fault handler and the signal code need to follow the
wrapping rules to find the correct instruction address.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call
do_signal will prepare the restart of the system call with a rewind of
the PSW before calling get_signal_to_deliver (where the debugger might
take control). For A ERESTART_RESTARTBLOCK restarting system call
do_signal will set -EINTR as return code.
There are two issues with this approach:
1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or
   ERESTART_RESTARTBLOCK as the rewinding already took place or the
   return code has been changed to -EINTR
2) if get_signal_to_deliver does not return with a signal to deliver
   the restart via the repeat of the svc instruction is left in place.
   This opens a race if another signal is made pending before the
   system call instruction can be reexecuted. The original system call
   will be restarted even if the second signal would have ended the
   system call with -EINTR.

These two issues can be solved by dropping the early rewind of the
system call before get_signal_to_deliver has been called and by using
the TIF_RESTART_SVC magic to do the restart if no signal has to be
delivered. The only situation where the system call restart via the
repeat of the svc instruction is appropriate is when a SA_RESTART
signal is delivered to user space.

Unfortunately this breaks inferior calls by the debugger again. The
system call number and the length of the system call instruction is
lost over the inferior call and user space will see ERESTARTNOHAND/
ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a
new ptrace interface is added to save/restore the system call number
and system call instruction length.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Switching on the DEVTMPFS kernel option helpes to maintain a /dev
file system early in the boot process, especially, in limited
environments.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove the save_area_64 field from the 0xe00 - 0xf00 area in the lowcore.
Use a free slot in the save_area array instead.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch implements the crash_map_pages() function for s390.
KEXEC_CRASH_MEM_ALIGN is set to HPAGE_SIZE, in order to support
kernel mappings that use large pages. We also use HPAGE_SIZE alignment
for CONFIG_HUGETLB_PAGE=n in order to have the same 1 MiB alignment on
all s390 systems.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch defines for s390 an ABI defined pointer to the vmcoreinfo note at
a well known address. With this patch tools are able to find this information
in dumps created by stand-alone or hypervisor dump tools.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch provides the architecture specific part of the s390 kdump
support.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add access function for real memory needed by s390 kdump backend.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

PSW restart can be triggered on offline CPUs. If this happens, currently
the PSW restart code fails, because functions like smp_processor_id()
do not work on offline CPUs. This patch fixes this as follows:

If PSW restart is triggered on an offline CPU, the PSW restart (sigp restart)
is done a second time on another CPU that is online and the old CPU is
stopped afterwards.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

_TIF_SINGLE_STEP is incorrectly defined as 1<<TIF_FREEZE.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use the ENTRY macro for the system call wrapper sys_setns_wrapper
similarly to the other wrappers.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The rcu page table free code uses a couple of bits in the page table
pointer passed to tlb_remove_table to discern the different page table
types. __tlb_remove_table extracts the type with an incorrect mask which
leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK).

Cc: stable@kernel.org
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression
for the case when both a user PER set (e.g. a storage alteration trace) and
PTRACE_SINGLESTEP are active. The new code will overrule the user PER set
with a instruction-fetch PER set over the whole address space for ptrace
single stepping. The inferior process will be stopped after each instruction
with an instruction fetch event. Any other events that may have occurred
concurrently are not reported (e.g. storage alteration event) because the
control bits for them are not set. The solution is to merge the PER control
bits of the user PER set with the PER_EVENT_IFETCH control bit for
PTRACE_SINGLESTEP.

Cc: stable@kernel.org
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix this warning:
WARNING: vmlinux.o(.text+0x199b6): Section mismatch in reference from
the function alloc_masks() to the function .init.text:__alloc_bootmem()
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The .start function and indirectly the .next function of the show_cpuinfo
sequential operation uses NR_CPUS as limit instead of nr_cpu_ids.
This can cause warnings like this:

WARNING: at /usr/src/linux/include/linux/cpumask.h:107
Process lscpu (pid: 575, task: 000000007deb4338, ksp: 000000007794f588)
Krnl PSW : 0704000180000000 0000000000106db4 (show_cpuinfo+0x108/0x234)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3
Krnl GPRS: 0000000000000003 0000000000791988 000000000071b478 0000000000000004
           0000000000000001 0000000000000000 000000007d139500 0000000000000400
           0000000000000000 000000000070e24c 000000007d48d600 0000000000000005
           000000007d48d600 00000000004dfa10 0000000000106cf8 000000007794fcc0
Krnl Code: 0000000000106da8: 95001000           cli     0(%r1),0
           0000000000106dac: a774ffac           brc     7,106d04
           0000000000106db0: a7f40001           brc     15,106db2
          >0000000000106db4: 92011000           mvi     0(%r1),1
           0000000000106db8: a7f4ffa6           brc     15,106d04
           0000000000106dbc: c0e5000065b4       brasl   %r14,113924
           0000000000106dc2: c09000303a45       larl    %r9,70e24c
           0000000000106dc8: c020001eefd4       larl    %r2,4e4d70

Replacing NR_CPUS with nr_cpu_ids fixes it.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Current IRQ statistics support does not show detail counts for I/O
interrupts which are processed internally only. The result is a
summation count which is way off such as this one:

           CPU0       CPU1       CPU2
I/O:       1331        710        442
[...]
QAI:         15         16         16   [I/O] QDIO Adapter Interrupt
QDI:          1          0          0   [I/O] QDIO Interrupt
DAS:        706        645        381   [I/O] DASD
C15:         26         10          0   [I/O] 3215
C70:          0          0          0   [I/O] 3270
TAP:          0          0          0   [I/O] Tape
VMR:          0          0          0   [I/O] Unit Record Devices
LCS:          0          0          0   [I/O] LCS
CLW:          0          0          0   [I/O] CLAW
CTC:          0          0          0   [I/O] CTC
APB:          0          0          0   [I/O] AP Bus

Fix this by moving I/O interrupt accounting into the common I/O layer.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This was found by inspection while tracking a similar
bug in compat_statfs64, that has been fixed in mainline
since decemeber.

- This fixes a bug where not all of the f_spare fields
  were cleared on mips and s390.
- Add the f_flags field to struct compat_statfs
- Copy f_flags to userspace in case someone cares.
- Use __clear_user to copy the f_spare field to userspace
  to ensure that all of the elements of f_spare are cleared.
  On some architectures f_spare is has 5 ints and on some
  architectures f_spare only has 4 ints.  Which makes
  the previous technique of clearing each int individually
  broken.

I don't expect anyone actually uses the old statfs system
call anymore but if they do let them benefit from having
the compat and the native version working the same.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

For s390 there is one additional byte associated with each page,
the storage key. This byte contains the referenced and changed
bits and needs to be included into the hibernation image.
If the storage keys are not restored to their previous state all
original pages would appear to be dirty. This can cause
inconsistencies e.g. with read-only filesystems.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

"s390: Use direct ktime path for s390 clockevent device" in linux-next
introduces this compile warning:

arch/s390/kernel/time.c: In function 's390_next_ktime':
arch/s390/kernel/time.c:118:2: warning:
  comparison of distinct pointer types lacks a cast [enabled by default]

Just use a u64 instead of an s64 variable. This is not a problem since it
will always contain a positive value.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/1316675957-5538-1-git-send-email-heiko.carstens@de.ibm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

If gmap_unmap_segment figures that the segment was not mapped in the
first place, it need to up mmap_sem on exit.

Cc: <stable@kernel.org>
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Analog to git commit 59e4c3a2
do not clear the additional personality flags on exec. We
need to inherit the personality bits in PER_MASK across exec.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

598841ca ([S390] use gmap address
spaces for kvm guest images) changed kvm on s390 to use a separate
address space for kvm guests. We can now put KVM guests anywhere
in the user address mode with a size up to 8PB - as long as the
memory is 1MB-aligned. This change was done without KVM extension
capability bit.
The change was added after 3.0, but we still have a chance to add
a feature bit before 3.1 (keeping the releases in a sane state).
We use number 71 to avoid collisions with other pending kvm patches
as requested by Alexander Graf.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NAvi Kivity <avi@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

598841ca ([S390] use gmap address
spaces for kvm guest images) changed kvm to use a separate address
space for kvm guests. This address space was switched in __vcpu_run
In some cases (preemption, page fault) there is the possibility that
this address space switch is lost.
The typical symptom was a huge amount of validity intercepts or
random guest addressing exceptions.
Fix this by doing the switch in sie_loop and sie_exit and saving the
address space in the gmap structure itself. Also use the preempt
notifier.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The clock comparator on s390 uses the same format as the TOD clock.
If the value in the clock comparator is smaller than the current TOD
value an interrupt is pending. Use the CLOCK_EVT_FEAT_KTIME feature
to get the unmodified ktime of the next clockevent expiration and
use it to program the clock comparator without querying the TOD clock.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20110823133143.153017933@de.ibm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>