- 30 10月, 2011 31 次提交
-
-
由 Martin Schwidefsky 提交于
Add prototypes and includes for functions used in different modules. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Fix prototype of some functions in arch/s390/oprofile to avoid non-ANSI warnings from sparse. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Make functions and data static to avoid sparse warnings. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Remove unnecessary code to avoid false positives from sparse, e.g. arch/s390/kernel/compat_signal.c:221:61: warning: invalid access past the end of 'set32' (8 8) Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Add get_clock_fast() which uses the slightly faster stckf if available. If stckf is not available fall back to stck, which has the same width. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
Linux on System z uses a ballooner based on diagnose 0x10. (aka as collaborative memory management). This patch implements diagnose 0x10 on the guest address space. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Carsten Otte 提交于
gmap_fault needs to walk the guest page table. However, parts of that may change if some other thread does munmap. In that case gmap_unmap_notifier will also unmap the corresponding parts from the guest page table. We need to take mmap_sem in order to serialize these operations. do_exception now calls __gmap_fault with mmap_sem held which does not get exported to modules. The exported function, which is called from KVM, now takes mmap_sem. Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Carsten Otte 提交于
This introduces locking via mm->page_table_lock to protect the rmap list for guest mappings from being corrupted by concurrent operations. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Carsten Otte 提交于
Fix possible deadlock reported by lockdep: qemu-system-s39/2963 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: gmap_alloc_table+0x9c/0x120 but task is already holding lock: (&mm->mmap_sem){++++++}, at: gmap_map_segment+0xa6/0x27c Actually gmap_alloc_table is the only called in gmap_map_segment with mmap_sem held, thus it's safe to simply remove the inner lock. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Carsten Otte 提交于
On sie_fault we need to switch back to user ASCE. Otherwise we get interresting effects when exiting to "userspace" while the guest space is still active. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Use a sigp sense running to decide which signal processor order to use for an ipi. If the target cpu is running use external call, if the target cpu is not running use emergency signal. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add support for CHSC I/O interrupt statistics in /proc/interrupts. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros. Change psw_kernel_bits / psw_user_bits to contain only the bits that are always set in the respective mode. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
An instruction with an address right below the adress limit for the current addressing mode will wrap. The instruction restart logic in the protection fault handler and the signal code need to follow the wrapping rules to find the correct instruction address. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Switching on the DEVTMPFS kernel option helpes to maintain a /dev file system early in the boot process, especially, in limited environments. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Remove the save_area_64 field from the 0xe00 - 0xf00 area in the lowcore. Use a free slot in the save_area array instead. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
This patch implements the crash_map_pages() function for s390. KEXEC_CRASH_MEM_ALIGN is set to HPAGE_SIZE, in order to support kernel mappings that use large pages. We also use HPAGE_SIZE alignment for CONFIG_HUGETLB_PAGE=n in order to have the same 1 MiB alignment on all s390 systems. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
This patch defines for s390 an ABI defined pointer to the vmcoreinfo note at a well known address. With this patch tools are able to find this information in dumps created by stand-alone or hypervisor dump tools. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Add access function for real memory needed by s390 kdump backend. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
PSW restart can be triggered on offline CPUs. If this happens, currently the PSW restart code fails, because functions like smp_processor_id() do not work on offline CPUs. This patch fixes this as follows: If PSW restart is triggered on an offline CPU, the PSW restart (sigp restart) is done a second time on another CPU that is online and the old CPU is stopped afterwards. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Tejun Heo 提交于
_TIF_SINGLE_STEP is incorrectly defined as 1<<TIF_FREEZE. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Use the ENTRY macro for the system call wrapper sys_setns_wrapper similarly to the other wrappers. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The rcu page table free code uses a couple of bits in the page table pointer passed to tlb_remove_table to discern the different page table types. __tlb_remove_table extracts the type with an incorrect mask which leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK). Cc: stable@kernel.org Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression for the case when both a user PER set (e.g. a storage alteration trace) and PTRACE_SINGLESTEP are active. The new code will overrule the user PER set with a instruction-fetch PER set over the whole address space for ptrace single stepping. The inferior process will be stopped after each instruction with an instruction fetch event. Any other events that may have occurred concurrently are not reported (e.g. storage alteration event) because the control bits for them are not set. The solution is to merge the PER control bits of the user PER set with the PER_EVENT_IFETCH control bit for PTRACE_SINGLESTEP. Cc: stable@kernel.org Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Fix this warning: WARNING: vmlinux.o(.text+0x199b6): Section mismatch in reference from the function alloc_masks() to the function .init.text:__alloc_bootmem() Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The .start function and indirectly the .next function of the show_cpuinfo sequential operation uses NR_CPUS as limit instead of nr_cpu_ids. This can cause warnings like this: WARNING: at /usr/src/linux/include/linux/cpumask.h:107 Process lscpu (pid: 575, task: 000000007deb4338, ksp: 000000007794f588) Krnl PSW : 0704000180000000 0000000000106db4 (show_cpuinfo+0x108/0x234) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000003 0000000000791988 000000000071b478 0000000000000004 0000000000000001 0000000000000000 000000007d139500 0000000000000400 0000000000000000 000000000070e24c 000000007d48d600 0000000000000005 000000007d48d600 00000000004dfa10 0000000000106cf8 000000007794fcc0 Krnl Code: 0000000000106da8: 95001000 cli 0(%r1),0 0000000000106dac: a774ffac brc 7,106d04 0000000000106db0: a7f40001 brc 15,106db2 >0000000000106db4: 92011000 mvi 0(%r1),1 0000000000106db8: a7f4ffa6 brc 15,106d04 0000000000106dbc: c0e5000065b4 brasl %r14,113924 0000000000106dc2: c09000303a45 larl %r9,70e24c 0000000000106dc8: c020001eefd4 larl %r2,4e4d70 Replacing NR_CPUS with nr_cpu_ids fixes it. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 10月, 2011 2 次提交
-
-
由 Linus Walleij 提交于
It is generally a better idea to make intentionally empty files contain the human-readable /* empty */ comment, also it makes the files play nice with "make distclean". Reported-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Grant Likely 提交于
A missing mach/gpio.h prevents building gpiolib on versatile express. CC drivers/gpio/gpiolib.o In file included from /.../linux/include/linux/gpio.h:18:0, from /.../linux/drivers/gpio/gpiolib.c:10: /.../linux/arch/arm/include/asm/gpio.h:5:23: fatal error: mach/gpio.h: No such file or directory compilation terminated. make[3]: *** [drivers/gpio/gpiolib.o] Error 1 make[2]: *** [drivers/gpio] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 28 10月, 2011 1 次提交
-
-
由 Eric W. Biederman 提交于
This was found by inspection while tracking a similar bug in compat_statfs64, that has been fixed in mainline since decemeber. - This fixes a bug where not all of the f_spare fields were cleared on mips and s390. - Add the f_flags field to struct compat_statfs - Copy f_flags to userspace in case someone cares. - Use __clear_user to copy the f_spare field to userspace to ensure that all of the elements of f_spare are cleared. On some architectures f_spare is has 5 ints and on some architectures f_spare only has 4 ints. Which makes the previous technique of clearing each int individually broken. I don't expect anyone actually uses the old statfs system call anymore but if they do let them benefit from having the compat and the native version working the same. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 27 10月, 2011 6 次提交
-
-
由 Paul Walmsley 提交于
When device data indicates that multiple block reads are not supported on a given HSMMC controller instance, log a message to the console, and pass the appropriate MMC capability flag to the MMC core. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Dave Hylands <dhylands@gmail.com> Tested-by: NSteve Sakoman <sakoman@gmail.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Rusty Russell 提交于
Host might be running under KVM, but we shouldn't allow Guest to think it can use KVM hypercalls (it can't, and it will embarrass itself if it tries). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Mark Brown 提交于
The current h8300 GPIO implementation doesn't provide the standard GPIO API, and in fact provides only direction control rather than normal GPIO functionality. Currently this is only used by the platform interrupt implementation rather than by a range of drivers so in preparation for moving over to gpiolib move the header out of the way of the gpiolib header, allowing a default GPIO implementation to be provided. For actual use of these GPIOs with gpiolib a real driver would still need to be written but there appears to be no current need for this. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Sahitya Tummala 提交于
On some targets, MCI_IRQ_MASK1 is not routed to the MSM in which case only "cmd_irq" must be used even for PIO. With this change, all the targets will use only "cmd_irq" for both CMD and PIO. Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Signed-off-by: NDavid Brown <davidb@codeaurora.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Alexander Tarasikov 提交于
This allows boards with non-standard sdio cards to fill the CIS/CCCR data. It is particularly important for old msm72k boards using wl1251. Also drop the obsolete embedded_sdio_data structure from the header as it was intended to surve a similiar purpose but was not implemented. Signed-off-by: NAlexander Tarasikov <alexander.tarasikov@gmail.com> Acked-by: NSahitya Tummala <stummala@codeaurora.org> [davidb: minor formatting cleanup] Signed-off-by: NDavid Brown <davidb@codeaurora.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Simon Horman 提交于
This allows specific (non-multiplexed) IRQ handlers to be used. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: NMagnus Damm <magnus.damm@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NChris Ball <cjb@laptop.org>
-