The 'timeout' value comes from userspace (CLOCK_MONOTONIC), but
converting this directly to jiffies doesn't take into account the
initial jiffies count at boot, which may differ from the base time
of CLOCK_MONOTONIC.

TODO: add ktime_delta_jiffies() when rebasing on 4.1 and use that
instead of ktime_sub/ktime_to_timespec/timespec_to_jiffies combo (as
suggested by Arnd)

v2: switch over from 'struct timespec' to ktime_t throughout, since
'struct timespec' will be deprecated (as suggested by Arnd)
v3: minor cosmetic tweaks

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Some targets (eg: msm8994) use the pinctrl framework to configure
interface pins. This change adds support for initialization and
pinctrl active/sleep state control for the HDMI driver.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DRM device's dev (hdmi->dev->dev) points to the mdss_mdp device
handle. Instead, we should get a reference to the mdss_hdmi
handle.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

That will complete the lists of Alpha + RGB formats.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

When the .atomic_commit() handler fails, clean up planes previoulsy
prepared by drm_atomic_helper_prepare_planes() with a call to
drm_atomic_helper_cleanup_planes().
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DSI video mode engine can only take active-high sync signals. This
change prevents MDP5 sending active-low sync signals to DSI in any
case.
Signed-off-by: NHai Li <hali@codeaurora.org>
Tested-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

I'm not sure where, exactly, but somewhere in here we must be relying on
an implicit include.

drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘dsi_host_init_panel_gpios’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
  ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:25: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
                         ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1364:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_output(msm_host->disp_en_gpio, 0);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1371:20: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te");
                    ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1378:3: error: implicit declaration of function ‘gpiod_direction_input’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_input(msm_host->te_gpio);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘msm_dsi_host_power_on’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1918:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration]
   gpiod_set_value(msm_host->disp_en_gpio, 1);
   ^
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NRob Clark <robdclark@gmail.com>

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Also there is a variant to find optional gpios that returns NULL if
there is no gpio instead of -ENOENT.

Make use of both features to simplify the driver.

This makes error checking more strict because errors like -ENOSYS ("no
gpio support compiled in") or -EPROBE_DEFER ("gpio not ready yet") are
handled correctly now.

Furthermore this is one caller less that stops us making the flags
argument to gpiod_get*() mandatory.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

There are different types of PHY from one chipset to another, while
the DSI host controller is relatively consistent across platforms.
Also, the PLL inside PHY is providing the source of DSI byte and
pixel clocks, which are used by DSI host controller. Separated devices
for clock provider and clock consumer make DSI driver better fit into
common clock framework.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

This change activates PLL driver for DSI to work with
common clock framework.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

DSI byte clock and pixel clocks are sourced from DSI PLL.
This change adds the DSI PLL source clock driver under
common clock framework.

This change handles DSI 28nm PLL only.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NWentao Xu <wentaox@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

regulator_get() never returns NULL. There's no need for IS_ERR_OR_NULL()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NRob Clark <robdclark@gmail.com>

msm_ioremap() never returns NULL. There's no need for IS_ERR_OR_NULL()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NRob Clark <robdclark@gmail.com>

CRTCs in DSI command mode data path should wait for pingpong done,
instead of vblank, to finish atomic commit.

This change is to enable PP_DONE irq on command mode CRTCs and wait for
this irq happens before atomic commit completion.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

MDP FLUSH registers could indicate if the previous flush updates
has taken effect at vsync boundary. Making use of this H/W feature
can catch the vsync that happened between CRTC atomic_flush and
*_wait_for_vblanks, to avoid unnecessary wait.

This change allows kms CRTCs to use their own *_wait_for_commit_done
functions to wait for FLUSH register cleared at vsync, before commit
completion.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns 0 in case of timeout and never
return < 0 so there is no additional information in printing the
value of time_left here as it will always be 0, thus it can be dropped.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns >= 0 but never
negative  - so the error check should be against equality
to 0 not <= 0.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

return type of wait_for_completion_timeout is unsigned long not int, this
patch assigns the return value of wait_for_completion_timeout to an
appropriately typed and named variable.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Some DSI peripherals rely on the HS clock on DSI clock lane as their clock
source. If the clock lane transitions between HS and LP states, it
can disrupt the functioning of such peripherals.

The mipi dsi mode flag MIPI_DSI_CLOCK_NON_CONTINUOUS already exists for
such peripheral drivers. Use it to configure the bit CLKLN_HS_FORCE_REQUEST
in DSI_LANE_CTRL.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

If the GEM object is imported, drm_prime_gem_destroy needs to be
called to clean up dma buffer related information.
Signed-off-by: NJilai Wang <jilaiw@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Fix build warning when building edp/edp_aux.o due to missing
prototype for edp_aux_transfer.

This function is only used in edp_aux.c so just make it static.
Reported-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns 0 in case of timeout so printing the
return value here will always yield 0 and is therefor redundant - dropped.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The timeout is passed as a constant which makes it HZ dependent because
jiffies are expected so it should be converted to jiffies. The actual
value is not clear from the code - my best guess is that this should be
300 milliseconds given that other timeouts are in milliseconds based on
looking at other drm drivers (e.g. exynos_drm_dsi.c:356 300ms,
tegra/dpaux.c:188 250ms) - this needs to be confirmed by someone who
knows the details of the driver.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

wait_for_completion_timeout return >= 0 but never negative so the check
logic looks inconsistent. Further the return value of
wait_for_completion_timeout was being passed up the call chain but the
x call sites as drm_dp_i2c_do_msg()/drm_dp_dpcd_access() check for < 0
thus timeout was being treated as success case.

<snip> drivers/gpu/drm/drm_dp_helper.c:drm_dp_i2c_do_msg()
                mutex_lock(&aux->hw_mutex);
                ret = aux->transfer(aux, msg);
                mutex_unlock(&aux->hw_mutex);
                if (ret < 0) {
<snip>
logic in edp_aux_transfer() seems incorrect as it could return 0 (timeout)
but checks of <= 0 to indicate error so the return probably should be
-ETIMEDOUT in case wait_for_completion_timeout returns 0 (timeout
occurred).
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Seems like disable can race with complete_flip() in process of disabling
a crtc, leading to:

[   49.065364] Call trace:
[   49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0
[   49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8
[   49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220
[   49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38
[   49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8
[   49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398
[   49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70
[   49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0
[   49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8
[   49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128
[   49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100
[   49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0
[   49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0
[   49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0

It makes no sense to free the ctl without disabling all stages, so lets
just move them together to avoid the crash.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

As found in apq8016 (used in DragonBoard 410c) and msm8916.

Note that numerically a306 is actually 307 (since a305c already claimed
306).  Nice and confusing.
Signed-off-by: NRob Clark <robdclark@gmail.com>

A few spots in the driver have support for downstream android
CONFIG_MSM_BUS_SCALING.  This is mainly to simplify backporting the
driver for various devices which do not have sufficient upstream
kernel support.  But the intentionally dead code seems to cause
some confusion.  Rename the #define to make this more clear.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Using fb modifier flag, support NV12MT format in MDP4.

v2:
- rework the modifier's description [Daniel Vetter's comment]
- drop .set_mode_config() callback [Rob Clark's comment]
v3:
- change VENDOR's name and restrict usage to NV12 [pointed by Daniel]
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Somehow this got lost when msm atomic support was first merged.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Dump a bit more info when the GPU hangs, without having hang_debug
enabled (which dumps a *lot* of registers).  Also dump the scratch
registers, as they are useful for determining where in the cmdstream
the GPU hung (and they seem always safe to read when GPU has hung).

Note that the freedreno gallium driver emits increasing counter values
to SCRATCH6 (to identify tile #) and SCRATCH7 (to identify draw #), so
these two in particular can be used to "triangulate" where in the
cmdstream the GPU hung.
Signed-off-by: NRob Clark <robdclark@gmail.com>

The index of ->planes[] array (3rd parameter) cannot be equal to MAX_PLANE.
This looks like a typo that is now fixed.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In error paths, this was being called without struct_mutex held.
Leading to panics like:

  msm 1a00000.qcom,mdss_mdp: No memory protection without IOMMU
  Kernel panic - not syncing: BUG!
  CPU: 0 PID: 1409 Comm: cat Not tainted 4.0.0-dirty #4
  Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
  Call trace:
  [<ffffffc000089c78>] dump_backtrace+0x0/0x118
  [<ffffffc000089da0>] show_stack+0x10/0x20
  [<ffffffc0006686d4>] dump_stack+0x84/0xc4
  [<ffffffc0006678b4>] panic+0xd0/0x210
  [<ffffffc0003e1ce4>] drm_gem_object_free+0x5c/0x60
  [<ffffffc000402870>] adreno_gpu_cleanup+0x60/0x80
  [<ffffffc0004035a0>] a3xx_destroy+0x20/0x70
  [<ffffffc0004036f4>] a3xx_gpu_init+0x84/0x108
  [<ffffffc0004018b8>] adreno_load_gpu+0x58/0x190
  [<ffffffc000419dac>] msm_open+0x74/0x88
  [<ffffffc0003e0a48>] drm_open+0x168/0x400
  [<ffffffc0003e7210>] drm_stub_open+0xa8/0x118
  [<ffffffc0001a0e84>] chrdev_open+0x94/0x198
  [<ffffffc000199f88>] do_dentry_open+0x208/0x310
  [<ffffffc00019a4c4>] vfs_open+0x44/0x50
  [<ffffffc0001aa26c>] do_last.isra.14+0x2c4/0xc10
  [<ffffffc0001aac38>] path_openat+0x80/0x5e8
  [<ffffffc0001ac354>] do_filp_open+0x2c/0x98
  [<ffffffc00019b60c>] do_sys_open+0x13c/0x228
  [<ffffffc00019b72c>] SyS_openat+0xc/0x18
  CPU1: stopping

But there isn't any particularly good reason to hold struct_mutex for
teardown, so just standardize on calling it without the mutex held and
use the _unlocked() versions for GEM obj unref'ing
Signed-off-by: NRob Clark <robdclark@gmail.com>

During cmd rx, only new versions of H/W provide register to read back
the real number of byte returned by panel. For the old versions, reading
this register will not get the right number. In fact, we only need to
assume the returned data is the same size as we expected, because later
we will check the data type to detect error.
Signed-off-by: NHai Li <hali@codeaurora.org>

drm_mode_connector_attach_encoder() function call is missing
during eDP and DSI connector initialization. As a result,
no encoder is returned by DRM_IOCTL_MODE_GETCONNECTOR system
call. This change is to fix this issue.
Signed-off-by: NHai Li <hali@codeaurora.org>

First of all, we don't want -EPROBE_DEFER when trying to bind children
to cause us to forget to free our vram.  And second we don't want vram
allocation fail to trigger _unbind_all() before _bind_all().
Signed-off-by: NRob Clark <robdclark@gmail.com>

When things go badly we can get a lot of these error irqs.  Let's not
DoS the user.
Signed-off-by: NRob Clark <robdclark@gmail.com>

When msm_framebuffer_init() fails before calling drm_framebuffer_init(),
drm_framebuffer_cleanup() [called in msm_framebuffer_destroy()]
is still being called even though drm_framebuffer_init() was not
called for that buffer. Thus a NULL pointer derefencing:

[  247.529691] Unable to handle kernel NULL pointer dereference at virtual address 0000027c
...
[  247.563996] PC is at __mutex_lock_slowpath+0x94/0x3a8
...
[  247.823025] [<c07c3c78>] (__mutex_lock_slowpath) from [<c07c3fac>] (mutex_lock+0x20/0x3c)
[  247.831186] [<c07c3fac>] (mutex_lock) from [<c0347cf0>] (drm_framebuffer_cleanup+0x18/0x38)
[  247.839520] [<c0347cf0>] (drm_framebuffer_cleanup) from [<c036d138>] (msm_framebuffer_destroy+0x48/0x100)
[  247.849066] [<c036d138>] (msm_framebuffer_destroy) from [<c036d580>] (msm_framebuffer_init+0x1e8/0x228)
[  247.858439] [<c036d580>] (msm_framebuffer_init) from [<c036d630>] (msm_framebuffer_create+0x70/0x134)
[  247.867642] [<c036d630>] (msm_framebuffer_create) from [<c03493ec>] (internal_framebuffer_create+0x67c/0x7b4)
[  247.877537] [<c03493ec>] (internal_framebuffer_create) from [<c034ce34>] (drm_mode_addfb2+0x20/0x98)
[  247.886650] [<c034ce34>] (drm_mode_addfb2) from [<c034071c>] (drm_ioctl+0x240/0x420)
[  247.894378] [<c034071c>] (drm_ioctl) from [<c011df7c>] (do_vfs_ioctl+0x4e4/0x5a4)
...
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
[plus initialize msm_fb to NULL to -Rob]
Signed-off-by: NRob Clark <robdclark@gmail.com>

The current iteration in get_dsi_id_from_intf() is wrong:
instead of iterating until hw_cfg->intf.count, we need to iterate
until MDP5_INTF_NUM_MAX here.

Let's take the example of msm8x16:

 hw_cfg->intf.count = 1
 intfs[0] = INTF_Disabled
 intfs[1] = INTF_DSI

If we stop iterating once i reaches hw_cfg->intf.count (== 1),
we will miss the test for intfs[1].

Actually, this hw_cfg->intf.count entry is quite confusing and is not
(or *should not be*) used anywhere else; let's remove it.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>