- 20 5月, 2010 12 次提交
-
-
由 Sonic Zhang 提交于
i2c event of next read/write byte may trigger before current int state is cleared in the interrupt handler. So, this should be done at the beginning of interrupt handler to avoid losing new i2c events. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Michael Hennerich 提交于
Add some debug() code to decode the error register. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Sonic Zhang 提交于
There isn't much point in managing our own custom timeout timer when the completion interface already includes support for it. This makes the resulting code much simpler and robust. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Mark Brown 提交于
The S3C I2C controller indicates completion of I2C transfers before the bus has a stop condition on it. In order to ensure that we do not attempt to start a new transfer before the bus is idle the driver currently inserts a 1ms delay. This is vastly larger than is generally required and has a visible effect on performance under load, such as when bringing up audio CODECs or reading back status information with non-bulk I2C reads. Replace the sleep with a spin on the IIC status register for up to 1ms. This will busy wait but testing on my SMDK6410 system indicates that the overwhelming majority of transactions complete on the first spin, with maximum latencies of less than 10 spins so the absolute overhead of busy waiting should be at worst comprable to msleep(), and the overall system performance is dramatically improved. The main risk is poor interaction with multimaster systems where we may miss the bus going idle before the next transaction. Defend against this by falling back to the original 1ms delay after 20 spins. The overall effect in my testing is an approximately 20% improvement in kernel startup time. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Linus Torvalds 提交于
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (48 commits) Revert "rtc: omap: let device wakeup capability be configured from chip init logic" DM365: Added more PINMUX configurations for AEMIF DM365: Make CLKOUTx available DM365: Added PINMUX definitions for GPIO30..32 Davinci: iotable based ioremap() interception Davinci: pinmux - use ioremap() Davinci: aintc/cpintc - use ioremap() Davinci: psc - use ioremap() Davinci: timer - use ioremap() Davinci: jtag_id - use ioremap() Davinci: da8xx: rtc - use ioremap Davinci: gpio - use ioremap() davinci: edma: fix coding style issue related to breaking lines davinci: edma: use BIT() wherever possible davinci: edma: fix coding style issue related to usage of braces davinci: edma: use a more intuitive name for edma_info Davinci: serial - conditional reset via pwremu Davinci: serial - use ioremap() Davinci: serial - remove unnecessary define Davinci: watchdog reset separation across socs ... Fix up trivial conflict in arch/arm/Kconfig due to removal of "select GENERIC_TIME"
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits) Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support Input: s3c24xx_ts - Implement generic GPIO configuration callback ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen ARM: S3C64XX: Add touchscreen platform device definition ARM: SAMSUNG: Move mach/ts.h to plat/ts.h ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: gpio.h cleanup ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Use common functions for gpiolib implementation drivers: serial: S5PC100 serial driver cleanup ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories ARM: SAMSUNG: move driver strength gpio configuration helper to common dir ARM: S5PV210: Add GPIOlib support ARM: SAMSUNGy: fix broken timer irq base ARM: SMDK6440: Add audio devices on board ARM: S5P6440: Add audio platform devices ...
-
由 KOSAKI Motohiro 提交于
Commit a45185d2 "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NKen Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Drop duplicated "config IOMMU_HELPER" [IA64] invoke oom-killer from page fault [IA64] use __ratelimit [IA64] Use set_cpus_allowed_ptr [IA64] Use set_cpus_allowed_ptr [IA64] arch/ia64/hp/common/sba_iommu.c: Rename dev_info to adi [IA64] removing redundant ifdef
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits) ARM: remove 'select GENERIC_TIME' ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO ARM: 6074/1: oprofile: convert from sysdev to platform device ARM: 6073/1: oprofile: remove old files and update KConfig ARM: 6072/1: oprofile: use perf-events framework as backend ARM: 6071/1: perf-events: allow modules to query the number of hardware counters ARM: 6070/1: perf-events: add support for xscale PMUs ARM: 6069/1: perf-events: use numeric ID to identify PMU ARM: 6064/1: pmu: register IRQs at runtime ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA ARM: 6134/1: Handle instruction cache maintenance fault properly ARM: nwfpe: allow debugging output to be configured at runtime ARM: rename mach_cpu_disable() to platform_cpu_disable() ARM: 6132/1: PL330: Add common core driver ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310 ARM: Move memory mapping into mmu.c ARM: Ensure meminfo is sorted prior to sanity_check_meminfo ARM: Remove useless linux/bootmem.h includes ARM: convert /proc/cpu/aligment to seq_file arm: use asm-generic/scatterlist.h ...
-
由 Kevin Hilman 提交于
This reverts commit 9c0a342c because it was included without proper signoffs from RTC maintainers.
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits) sh: update defconfigs. sh: Fix up the NUMA build for recent LMB changes. sh64: provide a stub per_cpu_trap_init() definition. sh: fix up CONFIG_KEXEC=n build. sh: fixup the docbook paths for clock framework shuffling. driver core: Early dev_name() depends on slab_is_available(). sh: simplify WARN usage in SH clock driver sh: Check return value of clk_get on ms7724 sh: Check return value of clk_get on ecovec24 sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c sh: move sh clock.c contents to drivers/sh/clk. sh: move sh asm/clock.h contents to linux/sh_clk.h V2 sh: remove unused clock lookup sh: switch boards to clkdev sh: switch sh4-202 to clkdev sh: switch shx3 to clkdev sh: switch sh7757 to clkdev sh: switch sh7763 to clkdev sh: switch sh7780 to clkdev sh: switch sh7786 to clkdev ...
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits) [S390] drivers/s390/char: Use kmemdup [S390] drivers/s390/char: Use kstrdup [S390] debug: enable exception-trace debug facility [S390] s390_hypfs: Add new attributes [S390] qdio: remove API wrappers [S390] qdio: set correct bit in dsci [S390] qdio: dont convert timestamps to microseconds [S390] qdio: remove memset hack [S390] qdio: prevent starvation on PCI devices [S390] qdio: count number of qdio interrupts [S390] user space fault: report fault before calling do_exit [S390] topology: expose core identifier [S390] dasd: remove uid from devmap [S390] dasd: add dynamic pav toleration [S390] vdso: add missing vdso_install target [S390] vdso: remove redundant check for CONFIG_64BIT [S390] avoid default_llseek in s390 drivers [S390] vmcp: disallow modular build [S390] add breaking event address for user space [S390] virtualization aware cpu measurement ...
-
- 19 5月, 2010 28 次提交
-
-
由 Ben Dooks 提交于
Make the driver depend on either ARCH_S3C2410 (as legacy) or the new device selection of SAMSUNG_DEV_TS. Change the menuconfig name to reflect this driver is now handling more devices that just the s3c2410. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Naveen Krishna 提交于
This patch adds a feature bit field in the touchscreen driver for Samsung SoCs. Which can be used to distinguish the TSADC module features. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: minor fix to title] Signed-off-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Naveen Krishna 提交于
This patch implements generic GPIO configuration function in Samsung touchscreen driver. And makes the touchscreen driver s3c24xx-ts.c generic to all the Samsung SoCs. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: fixed title ] Signed-off-by: NBen Dooks <ben-linux@fluff.org> Acked-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Ben Dooks 提交于
Move the arch/arm/mach-s3c64xx/dev-ts.c file to arch/arm/plat-samsung and rename the Kconfig entry appropriately. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Naveen Krishna 提交于
This patch implements cfg_gpio function for Samsung touchscreen. And also modifies the H1940 machine respectively. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
This patch adds the touchscreen platform device definition for S3C64XX boards. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Maurus Cuelenaere 提交于
This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in order to prepare for s3c64xx support in the touchscreen driver. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Move i2c helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch renames gpio related registers from s5pc1xx to s5pc100 to better match the plat-s5p framework style. GPIO_MP* defines now used anywhere thus has been removed. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio functionality is now supported. Gpio interrupts are disabled temporarly and will be added later. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
GPIOlib helpers from plat-samsung already have functions for accessing 4bit gpio banks. This patch removes the duplicated functions from plat-s5pc1xx/gpiolib.c. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as S3C6400/S3C6410/S5P6440. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Thomas Abraham 提交于
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p movement. The patches that perform the movement of the code from plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the build for the mach-s5pc100/clock.c code. Signed-off-by: NThomas Abraham <thomas.ab@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Driver strength parameter can be changed not only on S5PC100 but also on S5PV210/S5PC110 platforms, so move the helper functions to the common plat-samsung directory. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-rtc' into for-linus/samsung2 Conflicts: arch/arm/mach-s3c64xx/include/mach/map.h arch/arm/plat-samsung/Kconfig arch/arm/plat-samsung/Makefile
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-ts' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5p-audio' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5p-dma' into for-linus/samsung2 Conflicts: arch/arm/mach-s5pv210/Makefile
-
由 Ben Dooks 提交于
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5pv210-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s5p6440-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/s3c6410-clock' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/gpio2' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/rx1950' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/acer-n35' into for-linus/samsung2
-
由 Ben Dooks 提交于
Merge branch 'for-2635/samsung-clock' into for-linus/samsung2
-