i2c-bfin-twi: fix lost interrupts at high speeds

i2c event of next read/write byte may trigger before current int state
is cleared in the interrupt handler. So, this should be done at the
beginning of interrupt handler to avoid losing new i2c events.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

drivers/i2c/busses/i2c-bfin-twi.c

@@ -81,14 +81,15 @@ static const u16 pin_req[2][3] = {
 	{P_TWI1_SCL, P_TWI1_SDA, 0},
 };
 
-static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
+					unsigned short twi_int_status)
 {
-	unsigned short twi_int_status = read_INT_STAT(iface);
 	unsigned short mast_stat = read_MASTER_STAT(iface);
 
 	if (twi_int_status & XMTSERV) {
 		/* Transmit next data */
 		if (iface->writeNum > 0) {
+			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
@@ -110,10 +111,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
 		}
-		SSYNC();
-		/* Clear status */
-		write_INT_STAT(iface, XMTSERV);
-		SSYNC();
 	}
 	if (twi_int_status & RCVSERV) {
 		if (iface->readNum > 0) {
@@ -135,7 +132,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		} else if (iface->manual_stop) {
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) | STOP);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 		           iface->cur_msg + 1 < iface->msg_num) {
 			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
@@ -144,18 +140,12 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			else
 				write_MASTER_CTL(iface,
 					(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
-			SSYNC();
 		}
-		/* Clear interrupt source */
-		write_INT_STAT(iface, RCVSERV);
-		SSYNC();
 	}
 	if (twi_int_status & MERR) {
-		write_INT_STAT(iface, MERR);
 		write_INT_MASK(iface, 0);
 		write_MASTER_STAT(iface, 0x3e);
 		write_MASTER_CTL(iface, 0);
-		SSYNC();
 		iface->result = -EIO;
 
 		if (mast_stat & LOSTARB)
@@ -173,10 +163,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		 * results.
 		 */
 		if (twi_int_status & MCOMP) {
-			write_INT_STAT(iface, MCOMP);
-			write_INT_MASK(iface, 0);
-			write_MASTER_CTL(iface, 0);
-			SSYNC();
 			/* If it is a quick transfer, only address without data,
 			 * not an err, return 1.
 			 * If address is acknowledged return 1.
@@ -189,8 +175,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 		return;
 	}
 	if (twi_int_status & MCOMP) {
-		write_INT_STAT(iface, MCOMP);
-		SSYNC();
 		if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
 			if (iface->readNum == 0) {
 				/* set the read number to 1 and ask for manual
@@ -212,7 +196,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
 				iface->cur_msg+1 < iface->msg_num) {
 			iface->cur_msg++;
@@ -231,7 +214,6 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 					write_XMT_DATA8(iface,
 						*(iface->transPtr++));
 					iface->writeNum--;
-					SSYNC();
 				}
 			}
 
@@ -249,12 +231,10 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface)
 			/* remove restart bit and enable master receive */
 			write_MASTER_CTL(iface,
 				read_MASTER_CTL(iface) & ~RSTART);
-			SSYNC();
 		} else {
 			iface->result = 1;
 			write_INT_MASK(iface, 0);
 			write_MASTER_CTL(iface, 0);
-			SSYNC();
 		}
 	}
 	complete(&iface->complete);
@@ -265,9 +245,18 @@ static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
 {
 	struct bfin_twi_iface *iface = dev_id;
 	unsigned long flags;
+	unsigned short twi_int_status;
 
 	spin_lock_irqsave(&iface->lock, flags);
-	bfin_twi_handle_interrupt(iface);
+	while (1) {
+		twi_int_status = read_INT_STAT(iface);
+		if (!twi_int_status)
+			break;
+		/* Clear interrupt status */
+		write_INT_STAT(iface, twi_int_status);
+		bfin_twi_handle_interrupt(iface, twi_int_status);
+		SSYNC();
+	}
 	spin_unlock_irqrestore(&iface->lock, flags);
 	return IRQ_HANDLED;
 }