- 24 2月, 2016 2 次提交
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: "Stable bugfixes: - Fix nfs_size_to_loff_t - NFSv4: Fix a dentry leak on alias use Other bugfixes: - Don't schedule a layoutreturn if the layout segment can be freed immediately. - Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode - rpcrdma_bc_receive_call() should init rq_private_buf.len - fix stateid handling for the NFS v4.2 operations - pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page - fix panic in gss_pipe_downcall() in fips mode - Fix a race between layoutget and pnfs_destroy_layout - Fix a race between layoutget and bulk recalls" * tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout auth_gss: fix panic in gss_pipe_downcall() in fips mode pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page nfs4: fix stateid handling for the NFS v4.2 operations NFSv4: Fix a dentry leak on alias use xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode pNFS: Fix pnfs_mark_matching_lsegs_return() nfs: fix nfs_size_to_loff_t
-
由 Linus Torvalds 提交于
In commit 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses") I changed how the stac/clac instructions were generated around the user space accesses, which then made it possible to do batched accesses efficiently for user string copies etc. However, in doing so, I completely spaced out, and didn't even think about the 32-bit case. And nobody really even seemed to notice, because SMAP doesn't even exist until modern Skylake processors, and you'd have to be crazy to run 32-bit kernels on a modern CPU. Which brings us to Andy Lutomirski. He actually tested the 32-bit kernel on new hardware, and noticed that it doesn't work. My bad. The trivial fix is to add the required uaccess begin/end markers around the raw accesses in <asm/uaccess_32.h>. I feel a bit bad about this patch, just because that header file really should be cleaned up to avoid all the duplicated code in it, and this commit just expands on the problem. But this just fixes the bug without any bigger cleanup surgery. Reported-and-tested-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2016 8 次提交
-
-
由 Trond Myklebust 提交于
Replace another case where the layout 'plh_block_lgets' can trigger infinite loops in send_layoutget(). Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Trond Myklebust 提交于
If the server reboots while there is a layoutget outstanding, then the call to pnfs_choose_layoutget_stateid() will fail with an EAGAIN error, which causes an infinite loop in send_layoutget(). The reason why we never break out of the loop is that the layout 'plh_block_lgets' field is never cleared. Fix is to replace plh_block_lgets with NFS_LAYOUT_INVALID_STID, which can be reset after a new layoutget. Fixes: ab7d763e ("pNFS: Ensure nfs4_layoutget_prepare returns...") Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
由 Linus Torvalds 提交于
Merge tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two more small fixes. One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the stack made by the stack tracer. As the stack tracer scans the entire kernel stack, KASAN triggers seeing it as a "stack out of bounds" error. As the scan is looking at the contents of the stack from parent functions. The NOCHECK() tells KASAN that this is done on purpose, and is not some kind of stack overflow. The second fix is to the ftrace selftests, to retrieve the PID of executed commands from the shell with '$!' and not by parsing 'jobs'" * tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing, kasan: Silence Kasan warning in check_stack of stack_tracer ftracetest: Fix instance test to use proper shell command for pids
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen bug fixes from David Vrabel: - Two scsiback fixes (resource leak and spurious warning). - Fix DMA mapping of compound pages on arm/arm64. - Fix some pciback regressions in MSI-X handling. - Fix a pcifront crash due to some uninitialize state. * tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted. xen/pcifront: Report the errors better. xen/pciback: Save the number of MSI-X entries to be copied later. xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY xen: fix potential integer overflow in queue_reply xen/arm: correctly handle DMA mapping of compound pages xen/scsiback: avoid warnings when adding multiple LUNs to a domain xen/scsiback: correct frontend counting
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two fixes headed for stable: - Remove an unnecessary speed_index lookup for thermal hook in the gpio-fan driver. The unnecessary speed lookup can hog the system. - Handle negative conversion values correctly in the ads1015 driver" * tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (ads1015) Handle negative conversion values correctly
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "One ocrdma fix: - The new CQ API support was added to ocrdma, but they got the arming logic wrong, so without this, transfers eventually fail when they fail to arm the interrupt properly under load Two related fixes for mlx4: - When we added the 64bit extended counters support to the core IB code, they forgot to update the RoCE side of the mlx4 driver (the IB side they properly updated). I debated whether or not to include these patches as they could be considered feature enablement patches, but the existing code will blindy copy the 32bit counters, whether any counters were requested at all (a bug). These two patches make it (a) check to see that counters were requested and (b) copy the right counters (the 64bit support is new, the 32bit is not). For that reason I went ahead and took them" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx4: Add support for the port info class for RoCE ports IB/mlx4: Add support for extended counters over RoCE ports RDMA/ocrdma: Fix arm logic to align with new cq API
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C for you: A fix for a RuntimePM regression with OMAP, a fix to enable TCO for Lewisburg platforms, and a typo fix while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Adding Intel Lewisburg support for iTCO i2c: uniphier: fix typos in error messages i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
-
- 22 2月, 2016 17 次提交
-
-
由 David S. Miller 提交于
Merge tag 'linux-can-fixes-for-4.5-20160221' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-21 this is a pull reqeust of one patch for net/master. The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the ems_usb driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== bnx2x: Fix 848xx phys This series contains link-related fixes, mostly for the 848xx phys [2 patches are for 84833, and 2 patches are for 84858]. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth由 David S. Miller 提交于
Johan Hedberg says: ==================== pull request: bluetooth 2016-02-20 Here's an important patch for 4.5 which fixes potential invalid pointer access when processing completed Bluetooth HCI commands. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Jarzmik 提交于
The dm9000 driver doesn't work in at least one device-tree configuration, spitting an error message on irq resource : [ 1.062495] dm9000 8000000.ethernet: insufficient resources [ 1.068439] dm9000 8000000.ethernet: not found (-2). [ 1.073451] dm9000: probe of 8000000.ethernet failed with error -2 The reason behind is that the interrupt might be provided by a gpio controller, not probed when dm9000 is probed, and needing the probe deferral mechanism to apply. Currently, the interrupt is directly taken from resources. This patch changes this to use the more generic platform_get_irq(), which handles the deferral. Moreover, since commit Fixes: 7085a740 ("drivers: platform: parse IRQ flags from resources"), the interrupt trigger flags are honored in platform_get_irq(), so remove the needless code in dm9000. Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Acked-by: NMarcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: NSergei Ianovich <ynvich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
fix incorrect indexing of dev->dev_addr[] when copying the MAC address of FMV-J182 at buf[5]. Signed-off-by: NKen Kawasaki <ken_kawasaki@nifty.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shrikrishna Khare 提交于
Device emulation supports max size of 4096. Signed-off-by: NShrikrishna Khare <skhare@vmware.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Murali Karicheri says: ==================== net: ti: netcp: restore get/set_pad_info() functionality This series fixes a regression and add some improvements for the ease of maintainance. Incorporated comments against v1. Changelogs: v2 : combined 2-3 into one patch as this involves a header change fixed a parse warning in 3/4 per comment from Arnd. Removed Sign-off from Arnd against 1/4 added comments in 3/3 to alert on the usage of sw data per review comments v1 : added 2-4 to accomodate feedback received from review v0 : initial version to fix the regression (From Grygorii) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
SW data field in descriptor can be used by software to hold private data for the driver. As there are 4 words available for this purpose, use separate macros to place it or retrieve the same to/from descriptors. Also do type cast of data types accordingly. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
Rename the pad to sw_data as per description of this field in the hardware spec(refer sprugr9 from www.ti.com). Latest version of the document is at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1 Host Packet Descriptor describes this field. Define and use a constant for the size of sw_data field similar to other fields in the struct for desc and document the sw_data field in the header. As the sw_data is not touched by hw, it's type can be changed to u32. Rename the helpers to match with the updated dma desc field sw_data. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
The commit 89907779 ("netcp: try to reduce type confusion in descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks get/set_pad_info() functionality. The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to store DMA/MEM buffer pointer and buffer size respectively. And in both cases for Keystone 2 the pointer type size is 32 bit regardless of LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally is not expected to be defined. Unfortunately, above commit changed buffer's pointers save/restore code (get/set_pad_info()) and added intermediate conversation to u64 which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver crash in RX/TX path due to "Unable to handle kernel NULL pointer" exception. This issue was reported and discussed in [1]. Hence, fix it by partially reverting above commit and restoring get/set_pad_info() functionality as it was before. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Arnd Bergmann <arnd@arndb.de> Reported-by: NFranklin S Cooper Jr <fcooper@ti.com> Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian Campbell 提交于
Wei has been picking this up for quite a while now. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in its size computation, observing that the current method never guaranteed that the hashsize (measured in number of entries) would be a power of two, which the input hash function for that table requires. The root cause of the problem is that two values need to be computed (one, the allocation order of the storage requries, as passed to __get_free_pages, and two the number of entries for the hash table). Both need to be ^2, but for different reasons, and the existing code is simply computing one order value, and using it as the basis for both, which is wrong (i.e. it assumes that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not). To fix this, we change the logic slightly. We start by computing a goal allocation order (which is limited by the maximum size hash table we want to support. Then we attempt to allocate that size table, decreasing the order until a successful allocation is made. Then, with the resultant successful order we compute the number of buckets that hash table supports, which we then round down to the nearest power of two, giving us the number of entries the table actually supports. I've tested this locally here, using non-debug and spinlock-debug kernels, and the number of entries in the hashtable consistently work out to be powers of two in all cases. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 2月, 2016 9 次提交
-
-
由 Gerhard Uttenthaler 提交于
This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by: NGerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "This is unusually large, partly due to the EFI fixes that prevent accidental deletion of EFI variables through efivarfs that may brick machines. These fixes are somewhat involved to maintain compatibility with existing install methods and other usage modes, while trying to turn off the 'rm -rf' bricking vector. Other fixes are for large page ioremap()s and for non-temporal user-memcpy()s" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix vmalloc_fault() to handle large pages properly hpet: Drop stale URLs x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache() x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable lib/ucs2_string: Correct ucs2 -> utf8 conversion efi: Add pstore variables to the deletion whitelist efi: Make efivarfs entries immutable by default efi: Make our variable validation list include the guid efi: Do variable name validation tests in utf8 efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version lib/ucs2_string: Add ucs2 -> utf8 helper functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "A handful of CPU hotplug related fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Plug potential memory leak in CPU_UP_PREPARE perf/core: Remove the bogus and dangerous CPU_DOWN_FAILED hotplug state perf/core: Remove bogus UP_CANCELED hotplug state perf/x86/amd/uncore: Plug reference leak
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - Fix build error on 32-bit with checkpoint restart from Aneesh Kumar - Fix dedotify for binutils >= 2.26 from Andreas Schwab - Don't trace hcalls on offline CPUs from Denis Kirjanov - eeh: Fix stale cached primary bus from Gavin Shan - eeh: Fix stale PE primary bus from Gavin Shan - mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V - ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy * tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ioda: Set "read" permission when "write" is set powerpc/mm: Fix Multi hit ERAT cause by recent THP update powerpc/powernv: Fix stale PE primary bus powerpc/eeh: Fix stale cached primary bus powerpc/pseries: Don't trace hcalls on offline CPUs powerpc: Fix dedotify for binutils >= 2.26 powerpc/book3s_32: Fix build error with checkpoint restart
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: "A few fixes for drivers, nothing major here. Fixes are: iotdma fix to restart channels, new ID for wildcat PCH, residue fix for edma, disable irq for non-cyclic in dw" * tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer dmaengine: edma: fix residue race for cyclic dmaengine: dw: pci: add ID for WildcatPoint PCH dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk driver fixes from Stephen Boyd: "An assortment of vendor specific clk drivers fixes, most notably fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this cycle. There's also the random smattering of sparse/checker fixes, a build "fix" to get the Tango clk driver to compile because the Kconfig symbol was renamed after the fact, and a clk gpio fix for a patch mismerge" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits) clk: gpio: Really allow an optional clock= DT property Revert "clk: qcom: Specify LE device endianness" clk: versatile: mask VCO bits before writing clk: tegra: super: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warning for pll_m clk: tegra: Use definition for pll_u override bit clk: tegra: Fix warning caused by pll_u failing to lock clk: tegra: Fix clock sources for Tegra210 EMC clk: tegra: Add the APB2APE audio clock on Tegra210 clk: tegra: Add missing of_node_put() clk: tegra: Fix PLLE SS coefficients clk: tegra: Fix typos around clearing PLLE bits during enable clk: tegra: Do not disable PLLE when under hardware control clk: tegra: Fix pllx dyn step calculation clk: tegra: pll: Fix potential sleeping-while-atomic clk: tegra: Fix the misnaming of nvenc from msenc clk: tegra: Fix naming of MISC registers clk: tango4: rename ARCH_TANGOX to ARCH_TANGO clk: scpi: Fix checking return value of platform_device_register_simple() ...
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull more drm fixes from Dave Airlie: "Some more fixes trickled in: A bunch of VC4 ones since it's a pretty new driver not much chance of regressions, and it fixes GPU resets. Also one atomic fix, one set of fixes for a common bug in TTM cleanup, and one i915 hotplug fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: use post-decrement in error handling drm/atomic: Allow for holes in connector state, v2. drm/i915: Fix hpd live status bits for g4x drm/vc4: Use runtime PM to power cycle the device when the GPU hangs. drm/vc4: Enable runtime PM. drm/vc4: Fix spurious GPU resets due to BO reuse. drm/vc4: Drop error message on seqno wait timeouts. drm/vc4: Fix -ERESTARTSYS error return from BO waits. drm/vc4: Return an ERR_PTR from BO creation instead of NULL. drm/vc4: Fix the clear color for the first tile rendered. drm/vc4: Validate that WAIT_BO padding is cleared. drm/radeon: use post-decrement in error handling drm/amdgpu: use post-decrement in error handling
-
由 Simon Guinot 提交于
In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by: NVincent Pelletier <plr.vincent@gmail.com> Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Tested-by: NVincent Donnefort <vdonnefort@gmail.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 2月, 2016 4 次提交
-
-
由 Douglas Anderson 提交于
In commit 44d27137 ("Bluetooth: Compress the size of struct hci_ctrl") we squashed down the size of the structure by using a union with the assumption that all users would use the flag to determine whether we had a req_complete or a req_complete_skb. Unfortunately we had a case in hci_req_cmd_complete() where we weren't looking at the flag. This can result in a situation where we might be storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or vice versa. During some testing I found at least one case where the function hci_req_sync_complete() was called improperly because the kernel thought that it didn't require an SKB. Looking through the stack in kgdb I found that it was called by hci_event_packet() and that hci_event_packet() had both of its locals "req_complete" and "req_complete_skb" pointing to the same place: both to hci_req_sync_complete(). Let's make sure we always check the flag. For more details on debugging done, see <http://crbug.com/588288>. Fixes: 44d27137 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: NDouglas Anderson <dianders@chromium.org> Acked-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Jaedon Shin 提交于
The PHY link state is not chaged in GENETv2 caused by the previous commit 49f7a471 ("net: bcmgenet: Properly configure PHY to ignore interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe(). The internal PHY should use phy_mac_interrupt() when not in use PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The first condition to check GENET_HAS_MDIO_INTR is not related PHY link state, so this patch removes it. Fixes: 49f7a471 ("net: bcmgenet: Properly configure PHY to ignore interrupt") Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rainer Weikusat 提交于
The unix_stream_read_generic function tries to use a continue statement to restart the receive loop after waiting for a message. This may not work as intended as the caller might use a recvmsg call to peek at control messages without specifying a message buffer. If this was the case, the continue will cause the function to return without an error and without the credential information if the function had to wait for a message while it had returned with the credentials otherwise. Change to using goto to restart the loop without checking the condition first in this case so that credentials are returned either way. Signed-off-by: NRainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry V. Levin 提交于
The value passed by unix_diag_get_exact to unix_lookup_by_ino has type __u32, but unix_lookup_by_ino's argument ino has type int, which is not a problem yet. However, when ino is compared with sock_i_ino return value of type unsigned long, ino is sign extended to signed long, and this results to incorrect comparison on 64-bit architectures for inode numbers greater than INT_MAX. This bug was found by strace test suite. Fixes: 5d3cae8b ("unix_diag: Dumping exact socket core") Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-