提交 da6b7366 编写于 作者: L Linus Torvalds

Merge tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "A few fixes for drivers, nothing major here.

  Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
  residue fix for edma, disable irq for non-cyclic in dw"

* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
  dmaengine: edma: fix residue race for cyclic
  dmaengine: dw: pci: add ID for WildcatPoint PCH
  dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
......@@ -156,7 +156,6 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
/* Enable interrupts */
channel_set_bit(dw, MASK.XFER, dwc->mask);
channel_set_bit(dw, MASK.BLOCK, dwc->mask);
channel_set_bit(dw, MASK.ERROR, dwc->mask);
dwc->initialized = true;
......@@ -588,6 +587,9 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc,
spin_unlock_irqrestore(&dwc->lock, flags);
}
/* Re-enable interrupts */
channel_set_bit(dw, MASK.BLOCK, dwc->mask);
}
/* ------------------------------------------------------------------------- */
......@@ -618,11 +620,8 @@ static void dw_dma_tasklet(unsigned long data)
dwc_scan_descriptors(dw, dwc);
}
/*
* Re-enable interrupts.
*/
/* Re-enable interrupts */
channel_set_bit(dw, MASK.XFER, dw->all_chan_mask);
channel_set_bit(dw, MASK.BLOCK, dw->all_chan_mask);
channel_set_bit(dw, MASK.ERROR, dw->all_chan_mask);
}
......@@ -1261,6 +1260,7 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
int dw_dma_cyclic_start(struct dma_chan *chan)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
struct dw_dma *dw = to_dw_dma(chan->device);
unsigned long flags;
if (!test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) {
......@@ -1269,7 +1269,12 @@ int dw_dma_cyclic_start(struct dma_chan *chan)
}
spin_lock_irqsave(&dwc->lock, flags);
/* Enable interrupts to perform cyclic transfer */
channel_set_bit(dw, MASK.BLOCK, dwc->mask);
dwc_dostart(dwc, dwc->cdesc->desc[0]);
spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
......
......@@ -108,6 +108,10 @@ static const struct pci_device_id dw_pci_id_table[] = {
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c60) },
/* Broadwell */
{ PCI_VDEVICE(INTEL, 0x9ce0) },
{ }
};
MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
......
......@@ -113,6 +113,9 @@
#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */
#define CHMAP_EXIST BIT(24)
/* CCSTAT register */
#define EDMA_CCSTAT_ACTV BIT(4)
/*
* Max of 20 segments per channel to conserve PaRAM slots
* Also note that MAX_NR_SG should be atleast the no.of periods
......@@ -1680,9 +1683,20 @@ static void edma_issue_pending(struct dma_chan *chan)
spin_unlock_irqrestore(&echan->vchan.lock, flags);
}
/*
* This limit exists to avoid a possible infinite loop when waiting for proof
* that a particular transfer is completed. This limit can be hit if there
* are large bursts to/from slow devices or the CPU is never able to catch
* the DMA hardware idle. On an AM335x transfering 48 bytes from the UART
* RX-FIFO, as many as 55 loops have been seen.
*/
#define EDMA_MAX_TR_WAIT_LOOPS 1000
static u32 edma_residue(struct edma_desc *edesc)
{
bool dst = edesc->direction == DMA_DEV_TO_MEM;
int loop_count = EDMA_MAX_TR_WAIT_LOOPS;
struct edma_chan *echan = edesc->echan;
struct edma_pset *pset = edesc->pset;
dma_addr_t done, pos;
int i;
......@@ -1691,7 +1705,32 @@ static u32 edma_residue(struct edma_desc *edesc)
* We always read the dst/src position from the first RamPar
* pset. That's the one which is active now.
*/
pos = edma_get_position(edesc->echan->ecc, edesc->echan->slot[0], dst);
pos = edma_get_position(echan->ecc, echan->slot[0], dst);
/*
* "pos" may represent a transfer request that is still being
* processed by the EDMACC or EDMATC. We will busy wait until
* any one of the situations occurs:
* 1. the DMA hardware is idle
* 2. a new transfer request is setup
* 3. we hit the loop limit
*/
while (edma_read(echan->ecc, EDMA_CCSTAT) & EDMA_CCSTAT_ACTV) {
/* check if a new transfer request is setup */
if (edma_get_position(echan->ecc,
echan->slot[0], dst) != pos) {
break;
}
if (!--loop_count) {
dev_dbg_ratelimited(echan->vchan.chan.device->dev,
"%s: timeout waiting for PaRAM update\n",
__func__);
break;
}
cpu_relax();
}
/*
* Cyclic is simple. Just subtract pset[0].addr from pos.
......
......@@ -861,32 +861,42 @@ void ioat_timer_event(unsigned long data)
return;
}
spin_lock_bh(&ioat_chan->cleanup_lock);
/* handle the no-actives case */
if (!ioat_ring_active(ioat_chan)) {
spin_lock_bh(&ioat_chan->prep_lock);
check_active(ioat_chan);
spin_unlock_bh(&ioat_chan->prep_lock);
spin_unlock_bh(&ioat_chan->cleanup_lock);
return;
}
/* if we haven't made progress and we have already
* acknowledged a pending completion once, then be more
* forceful with a restart
*/
spin_lock_bh(&ioat_chan->cleanup_lock);
if (ioat_cleanup_preamble(ioat_chan, &phys_complete))
__cleanup(ioat_chan, phys_complete);
else if (test_bit(IOAT_COMPLETION_ACK, &ioat_chan->state)) {
u32 chanerr;
chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
dev_warn(to_dev(ioat_chan), "Restarting channel...\n");
dev_warn(to_dev(ioat_chan), "CHANSTS: %#Lx CHANERR: %#x\n",
status, chanerr);
dev_warn(to_dev(ioat_chan), "Active descriptors: %d\n",
ioat_ring_active(ioat_chan));
spin_lock_bh(&ioat_chan->prep_lock);
ioat_restart_channel(ioat_chan);
spin_unlock_bh(&ioat_chan->prep_lock);
spin_unlock_bh(&ioat_chan->cleanup_lock);
return;
} else {
} else
set_bit(IOAT_COMPLETION_ACK, &ioat_chan->state);
mod_timer(&ioat_chan->timer, jiffies + COMPLETION_TIMEOUT);
}
if (ioat_ring_active(ioat_chan))
mod_timer(&ioat_chan->timer, jiffies + COMPLETION_TIMEOUT);
else {
spin_lock_bh(&ioat_chan->prep_lock);
check_active(ioat_chan);
spin_unlock_bh(&ioat_chan->prep_lock);
}
mod_timer(&ioat_chan->timer, jiffies + COMPLETION_TIMEOUT);
spin_unlock_bh(&ioat_chan->cleanup_lock);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册