- 10 8月, 2010 1 次提交
-
-
由 Kevin Winchester 提交于
Using: gcc (GCC) 4.5.0 20100610 (prerelease) The following warning appears: init/main.c: In function `do_one_initcall': init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function This warning is actually correct, as the global initcall_debug could arguably be changed by the initcall. Correct this warning by extracting a new function, do_one_initcall_debug, that performs the initcall for the debug case. Signed-off-by: NKevin Winchester <kjwinchester@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2010 1 次提交
-
-
由 Suresh Siddha 提交于
Mark init_workqueues() as early_initcall() and thus it will be initialized before smp bringup. init_workqueues() registers for the hotcpu notifier and thus it should cope with the processors that are brought online after the workqueues are initialized. x86 smp bringup code uses workqueues and uses a workaround for the cold boot process (as the workqueues are initialized post smp_init()). Marking init_workqueues() as early_initcall() will pave the way for cleaning up this code. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
-
- 09 7月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
I have shown by code review that no driver takes the BKL at init time any more, so whatever the init code was locking against is no longer there and it is now safe to remove the BKL there. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSteven Rostedt <rostedt@goodmis> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 30 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Apparently "pid-1" confuses people... Requested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: torvalds@linux-foundation.org Cc: randy.dunlap@oracle.com Cc: Ilya Loginov <isloginov@gmail.com> LKML-Reference: <1277887031.1868.82.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Ilya reported that on a very slow machine he could reliably reproduce a race between forking init and kthreadd. We first fork init so that it obtains pid-1, however since the scheduler is already fully running at this point it can preempt and run the init thread before we spawn and set kthreadd_task. The init thread can then attempt spawning kthreads without kthreadd being present which results in an OOPS. Reported-by: NIlya Loginov <isloginov@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1277736661.3561.110.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 6月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
This patch updates percpu allocator such that it can serve limited amount of allocation before slab comes online. This is primarily to allow slab to depend on working percpu allocator. Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how much memory space and allocation map slots are reserved. If this reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation will fail till slab comes online. The following changes are made to implement early alloc. * pcpu_mem_alloc() now checks slab_is_available() * Chunks are allocated using pcpu_mem_alloc() * Init paths make sure ai->dyn_size is at least as large as PERCPU_DYNAMIC_EARLY_SIZE. * Initial alloc maps are allocated in __initdata and copied to kmalloc'd areas once slab is online. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org>
-
- 10 6月, 2010 1 次提交
-
-
由 Thomas Renninger 提交于
Patch is against latest Linus master branch and is expected to be safe bug fix. You get: ACPI: HARDWARE addr space,NOT supported yet for each ACPI defined CPU which status is active, but exceeds maxcpus= count. As these "not booted" CPUs do not run an idle routine and echo X >/proc/acpi/processor/*/throttling did not work I couldn't find a way to really access not onlined/booted machines. Still this should get fixed and /proc/acpi/processor/X dirs of cores exceeding maxcpus should not show up. I wonder whether this could get cleaned up by truncating possible cpu mask and nr_cpu_ids to setup_max_cpus early some day (and not exporting setup_max_cpus anymore then). But this needs touching of a lot other places... Signed-off-by: NThomas Renninger <trenn@suse.de> CC: travis@sgi.com CC: linux-acpi@vger.kernel.org CC: lenb@kernel.org Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 6月, 2010 2 次提交
-
-
由 Li Zefan 提交于
We have been resisting new ftrace plugins and removing existing ones, and kmemtrace has been superseded by kmem trace events and perf-kmem, so we remove it. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> [ remove kmemtrace from the makefile, handle slob too ] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Américo Wang 提交于
The boot tracer is useless. It simply logs the initcalls but in fact these initcalls are also logged through printk while using the initcall_debug kernel parameter. Nobody seem to be using it so far. Then just remove it. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Chase Douglas <chase.douglas@canonical.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com> [ remove the hooks in main.c, and the headers ] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 25 5月, 2010 1 次提交
-
-
由 Haicheng Li 提交于
For each new populated zone of hotadded node, need to update its pagesets with dynamically allocated per_cpu_pageset struct for all possible CPUs: 1) Detach zone->pageset from the shared boot_pageset at end of __build_all_zonelists(). 2) Use mutex to protect zone->pageset when it's still shared in onlined_pages() Otherwises, multiple zones of different nodes would share same boot strapping boot_pageset for same CPU, which will finally cause below kernel panic: ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:1239! invalid opcode: 0000 [#1] SMP ... Call Trace: [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0 [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0 [<ffffffff81128407>] __page_cache_alloc+0x67/0x70 [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260 [<ffffffff81132751>] ra_submit+0x21/0x30 [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0 [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0 [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670 [<ffffffff81266cfa>] nfs_file_read+0xca/0x130 [<ffffffff8117b20a>] do_sync_read+0xfa/0x140 [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0 [<ffffffff8117c151>] sys_read+0x51/0x80 [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b RIP [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900 RSP <ffff88000d1e78a8> ---[ end trace 4bda28328b9990db ] [akpm@linux-foundation.org: merge fix] Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Reviewed-by: NAndi Kleen <andi.kleen@intel.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 5月, 2010 2 次提交
-
-
由 Jason Wessel 提交于
The kernel debugger can operate well before mm_init(), but the x86 hardware breakpoint code which uses the perf api requires that the kernel allocators are initialized. This means the kernel debug core needs to provide an optional arch specific call back to allow the initialization functions to run after the kernel has been further initialized. The kdb shell already had a similar restriction with an early initialization and late initialization. The kdb_init() was moved into the debug core's version of the late init which is called dbg_late_init(); CC: kgdb-bugreport@lists.sourceforge.net Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NMartin Hicks <mort@sgi.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 25 3月, 2010 1 次提交
-
-
由 Miao Xie 提交于
cpuset_mem_spread_node() returns an offline node, and causes an oops. This patch fixes it by initializing task->mems_allowed to node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing memory hotplug. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Reported-by: NNick Piggin <npiggin@suse.de> Tested-by: NNick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 3月, 2010 3 次提交
-
-
由 H Hartley Sweeten 提交于
The only in tree external users of the symbol setup_max_cpus are in arch/x86/. The files ./kernel/alternative.c, ./kernel/visws_quirks.c, and ./mm/kmemcheck/kmemcheck.c are all guarded by CONFIG_SMP being defined. For this case the symbol is an unsigned int and declared as an extern in include/linux/smp.h. When CONFIG_SMP is not defined the symbol setup_max_cpus is a constant value that is only used in init/main.c. Make the symbol static for this case. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andreas Mohr 提交于
- new Documentation/init.txt file describing various forms of failure trying to load the init binary after kernel bootup - extend the init/main.c init failure message to direct to Documentation/init.txt Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
There are quite a few GFP_KERNEL memory allocations made during suspend/hibernation and resume that may cause the system to hang, because the I/O operations they depend on cannot be completed due to the underlying devices being suspended. Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in gfp_allowed_mask before suspend/hibernation and restoring the original values of these bits in gfp_allowed_mask durig the subsequent resume. [akpm@linux-foundation.org: fix CONFIG_PM=n linkage] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NMaxim Levitsky <maximlevitsky@gmail.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 3月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
To avoid potential problems with an empty /dev open /dev/console from rootfs instead of waiting to mount our root filesystem and mounting it there. This effectively guarantees that there will be a device node, and it won't be on a filesystem that we will ever unmount, so there are no issues with leaving /dev/console open and pinning the filesystem. This is actually more effective than automatically mounting devtmpfs on /dev because it removes removes the occasionally problematic assumption that /dev/console exists from the boot code. With this patch I was able to throw busybox on my /boot partition (which has no /dev directory) and boot into userspace without problems. The only possible negative consequence I can think of is that someone out there deliberately used did not use a character device that is major 5 minor 2 for /dev/console. Does anyone know of a situation in which that could make sense? Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 2月, 2010 1 次提交
-
-
由 Paul E. McKenney 提交于
Update the rcu_dereference() usages to take advantage of the new lockdep-based checking. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-6-git-send-email-paulmck@linux.vnet.ibm.com> [ -v2: fix allmodconfig missing symbol export build failure on x86 ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 2月, 2010 2 次提交
-
-
由 Yinghai Lu 提交于
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS. Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config. -v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of NR_CPUS. -v3: add doc in kernel-parameters.txt according to Andrew. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com>
-
由 Yinghai Lu 提交于
Prepare for using radix trees in early_irq_init(). Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-30-git-send-email-yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 07 2月, 2010 1 次提交
-
-
由 Eric Paris 提交于
ima wants to create an inode information struct (iint) when inodes are allocated. This means that at least the part of ima which does this allocation (the allocation is filled with information later) should before any inodes are created. To accomplish this we split the ima initialization routine placing the kmem cache allocator inside a security_initcall() function. Since this makes use of radix trees we also need to make sure that is initialized before security_initcall(). Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 17 12月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
A UP machine has 1 active cpu, not having the boot-cpu in the active map when starting the scheduler confuses things. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091216170517.423469527@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 12月, 2009 1 次提交
-
-
由 H Hartley Sweeten 提交于
The symbol 'call' is a static symbol used for initcall_debug. This same symbol name is used locally by a couple functions and produces the following sparse warnings: warning: symbol 'call' shadows an earlier one Fix this noise by renaming the local symbols. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 12月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164Reported-by: NAdam Williamson <awilliam@redhat.com> Cc: stable@kernel.org Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 9月, 2009 3 次提交
-
-
由 Alexey Dobriyan 提交于
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
It's only defined for NR_CPUS > BITS_PER_LONG; cpu_all_mask is always defined (and const). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Paul E. McKenney 提交于
These issues identified during an old-fashioned face-to-face code review extending over many hours. o Add comments for tricky parts of code, and correct comments that have passed their sell-by date. o Get rid of the vestiges of rcu_init_sched(), which is no longer needed now that PREEMPT_RCU is gone. o Move the #include of rcutree_plugin.h to the end of rcutree.c, which means that, rather than having a random collection of forward declarations, the new set of forward declarations document the set of plugins. The new home for this #include also allows __rcu_init_preempt() to move into rcutree_plugin.h. o Fix rcu_preempt_check_callbacks() to be static. Suggested-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12537246443924-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu> Peter Zijlstra <peterz@infradead.org>
-
- 22 9月, 2009 1 次提交
-
-
由 Jan Beulich 提交于
Sizing of memory allocations shouldn't depend on the number of physical pages found in a system, as that generally includes (perhaps a huge amount of) non-RAM pages. The amount of what actually is usable as storage should instead be used as a basis here. Some of the calculations (i.e. those not intending to use high memory) should likely even use (totalram_pages - totalhigh_pages). Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 9月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NJan Blunck <jblunck@suse.de> Tested-By: NHarald Hoyer <harald@redhat.com> Tested-By: NScott James Remnant <scott@ubuntu.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 9月, 2009 1 次提交
-
-
由 Paul E. McKenney 提交于
Ingo was getting warnings from rcu_scheduler_starting() indicating that context switches had occurred before RCU ended its special early-boot handling of grace periods. This is a dangerous condition, as it indicates that RCU might have prematurely ended grace periods. This exploratory fix moves rcu_scheduler_starting() earlier in boot. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 9月, 2009 1 次提交
-
-
由 Shane Wang 提交于
Move tboot.h from asm to linux to fix the build errors of intel_txt patch on non-X86 platforms. Remove the tboot code from generic code init/main.c and kernel/cpu.c. Signed-off-by: NShane Wang <shane.wang@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 29 8月, 2009 1 次提交
-
-
由 Feng Tang 提交于
drivers/sfi/sfi_core.c contains the generic SFI implementation. It has a private header, sfi_core.h, for its own use and the private use of future files in drivers/sfi/ Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 27 8月, 2009 1 次提交
-
-
由 Thomas Gleixner 提交于
Some architectures initialize clocks and timers in late_time_init and x86 wants to do the same to avoid FIXMAP hackery for calibrating the TSC. That would result in undefined sched_clock readout and wreckaged printk timestamps again. We probably have those already on archs which do all their time/clock setup in late_time_init. There is no harm to move that after late_time_init except that a few more boot timestamps are stale. The scheduler is not active at that point so no real wreckage is expected. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Cc: linux-arch@vger.kernel.org
-
- 21 8月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
One of my testboxes triggered this nasty stack overflow crash during SCSI probing: [ 5.874004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.875004] device: 'sda': device_add [ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c [ 5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110 [ 5.878004] *pde = 00000000 [ 5.878004] Thread overran stack, or stack corrupted [ 5.878004] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 5.878004] last sysfs file: [ 5.878004] [ 5.878004] Pid: 1, comm: swapper Not tainted (2.6.31-rc6-tip-01272-g9919e28-dirty #5685) [ 5.878004] EIP: 0060:[<b1008321>] EFLAGS: 00010083 CPU: 0 [ 5.878004] EIP is at print_context_stack+0x81/0x110 [ 5.878004] EAX: cf8a3000 EBX: cf8a3fe4 ECX: 00000049 EDX: 00000000 [ 5.878004] ESI: b1cfce84 EDI: 00000000 EBP: cf8a3018 ESP: cf8a2ff4 [ 5.878004] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 5.878004] Process swapper (pid: 1, ti=cf8a2000 task=cf8a8000 task.ti=cf8a3000) [ 5.878004] Stack: [ 5.878004] b1004867 fffff000 cf8a3ffc [ 5.878004] Call Trace: [ 5.878004] [<b1004867>] ? kernel_thread_helper+0x7/0x10 [ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c [ 5.878004] IP: [<b1008321>] print_context_stack+0x81/0x110 [ 5.878004] *pde = 00000000 [ 5.878004] Thread overran stack, or stack corrupted [ 5.878004] Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC The oops did not reveal any more details about the real stack that we have and the system got into an infinite loop of recursive pagefaults. So i booted with CONFIG_STACK_TRACER=y and the 'stacktrace' boot parameter. The box did not crash (timings/conditions probably changed a tiny bit to trigger the catastrophic crash), but the /debug/tracing/stack_trace file was rather revealing: Depth Size Location (72 entries) ----- ---- -------- 0) 3704 52 __change_page_attr+0xb8/0x290 1) 3652 24 __change_page_attr_set_clr+0x43/0x90 2) 3628 60 kernel_map_pages+0x108/0x120 3) 3568 40 prep_new_page+0x7d/0x130 4) 3528 84 get_page_from_freelist+0x106/0x420 5) 3444 116 __alloc_pages_nodemask+0xd7/0x550 6) 3328 36 allocate_slab+0xb1/0x100 7) 3292 36 new_slab+0x1c/0x160 8) 3256 36 __slab_alloc+0x133/0x2b0 9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0 10) 3216 108 create_object+0x28/0x250 11) 3108 40 kmemleak_alloc+0x81/0xc0 12) 3068 24 kmem_cache_alloc+0x162/0x1d0 13) 3044 52 scsi_pool_alloc_command+0x29/0x70 14) 2992 20 scsi_host_alloc_command+0x22/0x70 15) 2972 24 __scsi_get_command+0x1b/0x90 16) 2948 28 scsi_get_command+0x35/0x90 17) 2920 24 scsi_setup_blk_pc_cmnd+0xd4/0x100 18) 2896 128 sd_prep_fn+0x332/0xa70 19) 2768 36 blk_peek_request+0xe7/0x1d0 20) 2732 56 scsi_request_fn+0x54/0x520 21) 2676 12 __generic_unplug_device+0x2b/0x40 22) 2664 24 blk_execute_rq_nowait+0x59/0x80 23) 2640 172 blk_execute_rq+0x6b/0xb0 24) 2468 32 scsi_execute+0xe0/0x140 25) 2436 64 scsi_execute_req+0x152/0x160 26) 2372 60 scsi_vpd_inquiry+0x6c/0x90 27) 2312 44 scsi_get_vpd_page+0x112/0x160 28) 2268 52 sd_revalidate_disk+0x1df/0x320 29) 2216 92 rescan_partitions+0x98/0x330 30) 2124 52 __blkdev_get+0x309/0x350 31) 2072 8 blkdev_get+0xf/0x20 32) 2064 44 register_disk+0xff/0x120 33) 2020 36 add_disk+0x6e/0xb0 34) 1984 44 sd_probe_async+0xfb/0x1d0 35) 1940 44 __async_schedule+0xf4/0x1b0 36) 1896 8 async_schedule+0x12/0x20 37) 1888 60 sd_probe+0x305/0x360 38) 1828 44 really_probe+0x63/0x170 39) 1784 36 driver_probe_device+0x5d/0x60 40) 1748 16 __device_attach+0x49/0x50 41) 1732 32 bus_for_each_drv+0x5b/0x80 42) 1700 24 device_attach+0x6b/0x70 43) 1676 16 bus_attach_device+0x47/0x60 44) 1660 76 device_add+0x33d/0x400 45) 1584 52 scsi_sysfs_add_sdev+0x6a/0x2c0 46) 1532 108 scsi_add_lun+0x44b/0x460 47) 1424 116 scsi_probe_and_add_lun+0x182/0x4e0 48) 1308 36 __scsi_add_device+0xd9/0xe0 49) 1272 44 ata_scsi_scan_host+0x10b/0x190 50) 1228 24 async_port_probe+0x96/0xd0 51) 1204 44 __async_schedule+0xf4/0x1b0 52) 1160 8 async_schedule+0x12/0x20 53) 1152 48 ata_host_register+0x171/0x1d0 54) 1104 60 ata_pci_sff_activate_host+0xf3/0x230 55) 1044 44 ata_pci_sff_init_one+0xea/0x100 56) 1000 48 amd_init_one+0xb2/0x190 57) 952 8 local_pci_probe+0x13/0x20 58) 944 32 pci_device_probe+0x68/0x90 59) 912 44 really_probe+0x63/0x170 60) 868 36 driver_probe_device+0x5d/0x60 61) 832 20 __driver_attach+0x89/0xa0 62) 812 32 bus_for_each_dev+0x5b/0x80 63) 780 12 driver_attach+0x1e/0x20 64) 768 72 bus_add_driver+0x14b/0x2d0 65) 696 36 driver_register+0x6e/0x150 66) 660 20 __pci_register_driver+0x53/0xc0 67) 640 8 amd_init+0x14/0x16 68) 632 572 do_one_initcall+0x2b/0x1d0 69) 60 12 do_basic_setup+0x56/0x6a 70) 48 20 kernel_init+0x84/0xce 71) 28 28 kernel_thread_helper+0x7/0x10 There's a lot of fat functions on that stack trace, but the largest of all is do_one_initcall(). This is due to the boot trace entry variables being on the stack. Fixing this is relatively easy, initcalls are fundamentally serialized, so we can move the local variables to file scope. Note that this large stack footprint was present for a couple of months already - what pushed my system over the edge was the addition of kmemleak to the call-chain: 6) 3328 36 allocate_slab+0xb1/0x100 7) 3292 36 new_slab+0x1c/0x160 8) 3256 36 __slab_alloc+0x133/0x2b0 9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0 10) 3216 108 create_object+0x28/0x250 11) 3108 40 kmemleak_alloc+0x81/0xc0 12) 3068 24 kmem_cache_alloc+0x162/0x1d0 13) 3044 52 scsi_pool_alloc_command+0x29/0x70 This pushes the total to ~3800 bytes, only a tiny bit more was needed to corrupt the on-kernel-stack thread_info. The fix reduces the stack footprint from 572 bytes to 28 bytes. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 8月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
nr_cpu_ids is dependent only on cpu_possible_map and setup_per_cpu_areas() already depends on cpu_possible_map and will use nr_cpu_ids. Initialize nr_cpu_ids before setting up percpu areas. Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 22 7月, 2009 1 次提交
-
-
由 Joseph Cihula 提交于
Support for graceful handling of kernel reboots after an Intel(R) TXT launch. Without this patch, attempting to reboot or halt the system will cause the TXT hardware to lock memory upon system restart because the secrets-in-memory flag that was set on launch was never cleared. This will in turn cause BIOS to execute a TXT Authenticated Code Module (ACM) that will scrub all of memory and then unlock it. Depending on the amount of memory in the system and its type, this may take some time. This patch creates a 1:1 address mapping to the tboot module and then calls back into tboot so that it may properly and securely clean up system state and clear the secrets-in-memory flag. When it has completed these steps, the tboot module will reboot or halt the system. arch/x86/kernel/reboot.c | 8 ++++++++ init/main.c | 3 +++ 2 files changed, 11 insertions(+) Signed-off-by: NJoseph Cihula <joseph.cihula@intel.com> Signed-off-by: NShane Wang <shane.wang@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 24 6月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use dynamic percpu allocator. The first chunk is allocated using embedding helper and 8k is reserved for modules. This ensures that the new allocator behaves almost identically to the original allocator as long as static percpu variables are concerned, so it shouldn't introduce much breakage. s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing range limit the addressing model imposes. Unfortunately, this breaks if the address is specified using a variable, so for now, the two archs aren't converted. The following architectures are affected by this change. * sh * arm * cris * mips * sparc(32) * blackfin * avr32 * parisc (broken, under investigation) * m32r * powerpc(32) As this change makes the dynamic allocator the default one, CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert - CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted archs. These archs implement their own setup_per_cpu_areas() and the conversion is not trivial. * powerpc(64) * sparc(64) * ia64 * alpha * s390 Boot and batch alloc/free tests on x86_32 with debug code (x86_32 doesn't use default first chunk initialization). Compile tested on sparc(32), powerpc(32), arm and alpha. Kyle McMartin reported that this change breaks parisc. The problem is still under investigation and he is okay with pushing this patch forward and fixing parisc later. [ Impact: use dynamic allocator for most archs w/o custom percpu setup ] Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bryan Wu <cooloney@kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu>
-
- 23 6月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
SLAB uses get/put_online_cpus() which use a mutex which is itself only initialized when cpu_hotplug_init() is called. Currently we hang suring boot in SLAB due to doing that too late. Reported by James Bottomley and Sachin Sant (and possibly others). Debugged by Benjamin Herrenschmidt. This just removes the dynamic initialization of the data structures, and replaces it with a static one, avoiding this dependency entirely, and removing one unnecessary special initcall. Tested-by: NSachin Sant <sachinp@in.ibm.com> Tested-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 6月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The page allocator also needs the masking of gfp flags during boot, so this moves it out of slab/slub and uses it with the page allocator as well. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-