- 10 8月, 2010 1 次提交
-
-
由 Kevin Winchester 提交于
Using: gcc (GCC) 4.5.0 20100610 (prerelease) The following warning appears: init/main.c: In function `do_one_initcall': init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function This warning is actually correct, as the global initcall_debug could arguably be changed by the initcall. Correct this warning by extracting a new function, do_one_initcall_debug, that performs the initcall for the debug case. Signed-off-by: NKevin Winchester <kjwinchester@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2010 1 次提交
-
-
由 Suresh Siddha 提交于
Mark init_workqueues() as early_initcall() and thus it will be initialized before smp bringup. init_workqueues() registers for the hotcpu notifier and thus it should cope with the processors that are brought online after the workqueues are initialized. x86 smp bringup code uses workqueues and uses a workaround for the cold boot process (as the workqueues are initialized post smp_init()). Marking init_workqueues() as early_initcall() will pave the way for cleaning up this code. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org>
-
- 23 7月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
slow-work doesn't have any user left. Kill it. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com>
-
- 09 7月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
I have shown by code review that no driver takes the BKL at init time any more, so whatever the init code was locking against is no longer there and it is now safe to remove the BKL there. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NSteven Rostedt <rostedt@goodmis> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 30 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Apparently "pid-1" confuses people... Requested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: torvalds@linux-foundation.org Cc: randy.dunlap@oracle.com Cc: Ilya Loginov <isloginov@gmail.com> LKML-Reference: <1277887031.1868.82.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 6月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Ilya reported that on a very slow machine he could reliably reproduce a race between forking init and kthreadd. We first fork init so that it obtains pid-1, however since the scheduler is already fully running at this point it can preempt and run the init thread before we spawn and set kthreadd_task. The init thread can then attempt spawning kthreads without kthreadd being present which results in an OOPS. Reported-by: NIlya Loginov <isloginov@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1277736661.3561.110.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 28 6月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
This patch updates percpu allocator such that it can serve limited amount of allocation before slab comes online. This is primarily to allow slab to depend on working percpu allocator. Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how much memory space and allocation map slots are reserved. If this reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation will fail till slab comes online. The following changes are made to implement early alloc. * pcpu_mem_alloc() now checks slab_is_available() * Chunks are allocated using pcpu_mem_alloc() * Init paths make sure ai->dyn_size is at least as large as PERCPU_DYNAMIC_EARLY_SIZE. * Initial alloc maps are allocated in __initdata and copied to kmalloc'd areas once slab is online. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org>
-
- 10 6月, 2010 1 次提交
-
-
由 Thomas Renninger 提交于
Patch is against latest Linus master branch and is expected to be safe bug fix. You get: ACPI: HARDWARE addr space,NOT supported yet for each ACPI defined CPU which status is active, but exceeds maxcpus= count. As these "not booted" CPUs do not run an idle routine and echo X >/proc/acpi/processor/*/throttling did not work I couldn't find a way to really access not onlined/booted machines. Still this should get fixed and /proc/acpi/processor/X dirs of cores exceeding maxcpus should not show up. I wonder whether this could get cleaned up by truncating possible cpu mask and nr_cpu_ids to setup_max_cpus early some day (and not exporting setup_max_cpus anymore then). But this needs touching of a lot other places... Signed-off-by: NThomas Renninger <trenn@suse.de> CC: travis@sgi.com CC: linux-acpi@vger.kernel.org CC: lenb@kernel.org Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 6月, 2010 2 次提交
-
-
由 Li Zefan 提交于
We have been resisting new ftrace plugins and removing existing ones, and kmemtrace has been superseded by kmem trace events and perf-kmem, so we remove it. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> [ remove kmemtrace from the makefile, handle slob too ] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
由 Américo Wang 提交于
The boot tracer is useless. It simply logs the initcalls but in fact these initcalls are also logged through printk while using the initcall_debug kernel parameter. Nobody seem to be using it so far. Then just remove it. Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Chase Douglas <chase.douglas@canonical.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com> [ remove the hooks in main.c, and the headers ] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 25 5月, 2010 1 次提交
-
-
由 Haicheng Li 提交于
For each new populated zone of hotadded node, need to update its pagesets with dynamically allocated per_cpu_pageset struct for all possible CPUs: 1) Detach zone->pageset from the shared boot_pageset at end of __build_all_zonelists(). 2) Use mutex to protect zone->pageset when it's still shared in onlined_pages() Otherwises, multiple zones of different nodes would share same boot strapping boot_pageset for same CPU, which will finally cause below kernel panic: ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:1239! invalid opcode: 0000 [#1] SMP ... Call Trace: [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0 [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0 [<ffffffff81128407>] __page_cache_alloc+0x67/0x70 [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260 [<ffffffff81132751>] ra_submit+0x21/0x30 [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0 [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0 [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670 [<ffffffff81266cfa>] nfs_file_read+0xca/0x130 [<ffffffff8117b20a>] do_sync_read+0xfa/0x140 [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0 [<ffffffff8117c151>] sys_read+0x51/0x80 [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b RIP [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900 RSP <ffff88000d1e78a8> ---[ end trace 4bda28328b9990db ] [akpm@linux-foundation.org: merge fix] Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Reviewed-by: NAndi Kleen <andi.kleen@intel.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 5月, 2010 2 次提交
-
-
由 Jason Wessel 提交于
The kernel debugger can operate well before mm_init(), but the x86 hardware breakpoint code which uses the perf api requires that the kernel allocators are initialized. This means the kernel debug core needs to provide an optional arch specific call back to allow the initialization functions to run after the kernel has been further initialized. The kdb shell already had a similar restriction with an early initialization and late initialization. The kdb_init() was moved into the debug core's version of the late init which is called dbg_late_init(); CC: kgdb-bugreport@lists.sourceforge.net Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
This patch contains the hooks and instrumentation into kernel which live outside the kernel/debug directory, which the kdb core will call to run commands like lsmod, dmesg, bt etc... CC: linux-arch@vger.kernel.org Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NMartin Hicks <mort@sgi.com>
-
- 16 5月, 2010 2 次提交
-
-
由 Frederic Weisbecker 提交于
This new config is deemed to simplify even more the lockup detector dependencies and can make it easier to bring a smooth sorting between archs that support the new generic lockup detector and those that still have their own, especially for those that are in the middle of this migration. Instead of checking whether we have CONFIG_LOCKUP_DETECTOR + CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs to build its own lockup detector, take a shortcut with this new config. It is enabled only if the hardlockup detection part of the whole lockup detector is on. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com>
-
由 Frederic Weisbecker 提交于
CONFIG_PERF_EVENT_NMI is something that need to be enabled from the arch. This is fine on x86 as PERF_EVENTS is builtin but if other archs select it, they will need to handle the PERF_EVENTS dependency. Instead, handle the dependency in the generic layer: - archs need to tell what they support through HAVE_PERF_EVENTS_NMI - Enable magically PERF_EVENTS_NMI if we have PERF_EVENTS and HAVE_PERF_EVENTS_NMI. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com>
-
- 13 5月, 2010 1 次提交
-
-
由 Don Zickus 提交于
The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 27 4月, 2010 1 次提交
-
-
由 Vivek Goyal 提交于
This patch fixes few usability and configurability issues. o All the cgroup based controller options are configurable from "Genral Setup/Control Group Support/" menu. blkio is the only exception. Hence make this option visible in above menu and make it configurable from there to bring it inline with rest of the cgroup based controllers. o Get rid of CONFIG_DEBUG_CFQ_IOSCHED. This option currently does two things. - Enable printing of cgroup paths in blktrace - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat files in cgroup. If we are using group scheduling, blktrace data is of not really much use if cgroup information is not present. To get this data, currently one has to also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of all the additional debug stat files which is not desired. Hence, this patch moves printing of cgroup paths under CONFIG_CFQ_GROUP_IOSCHED. This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which can be enabled through config menu. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Acked-by: NDivyesh Shah <dpshah@google.com> Reviewed-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 25 4月, 2010 1 次提交
-
-
由 Phillip Lougher 提交于
The unpack routine fails to handle the decompress_method() returning unrecognised decompressor (compress_name == NULL). This results in the routine looping eventually oopsing on an out of bounds memory access. Note this bug is usually hidden, only triggering on trailing junk after one or more correct compressed blocks. The case of the compressed archive being complete junk is (by accident?) caught by the if (state != Reset) check because state is initialised to Start, but not updated due to the decompressor not having been called. Obviously if the junk is trailing a correctly decompressed buffer, state == Reset from the previous call to the decompressor. Signed-off-by: NPhillip Lougher <phillip@lougher.demon.co.uk> Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2010 1 次提交
-
-
由 Li Zefan 提交于
This is left over from commit 7c941438 ("sched: Remove USER_SCHED"") Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NDhaval Giani <dhaval.giani@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Howells <dhowells@redhat.com> LKML-Reference: <4BA9A05F.7010407@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 25 3月, 2010 1 次提交
-
-
由 Miao Xie 提交于
cpuset_mem_spread_node() returns an offline node, and causes an oops. This patch fixes it by initializing task->mems_allowed to node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing memory hotplug. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Reported-by: NNick Piggin <npiggin@suse.de> Tested-by: NNick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 3月, 2010 1 次提交
-
-
由 Kirill A. Shutemov 提交于
This patchset introduces eventfd-based API for notifications in cgroups and implements memory notifications on top of it. It uses statistics in memory controler to track memory usage. Output of time(1) on building kernel on tmpfs: Root cgroup before changes: make -j2 506.37 user 60.93s system 193% cpu 4:52.77 total Non-root cgroup before changes: make -j2 507.14 user 62.66s system 193% cpu 4:54.74 total Root cgroup after changes (0 thresholds): make -j2 507.13 user 62.20s system 193% cpu 4:53.55 total Non-root cgroup after changes (0 thresholds): make -j2 507.70 user 64.20s system 193% cpu 4:55.70 total Root cgroup after changes (1 thresholds, never crossed): make -j2 506.97 user 62.20s system 193% cpu 4:53.90 total Non-root cgroup after changes (1 thresholds, never crossed): make -j2 507.55 user 64.08s system 193% cpu 4:55.63 total This patch: Introduce the write-only file "cgroup.event_control" in every cgroup. To register new notification handler you need: - create an eventfd; - open a control file to be monitored. Callbacks register_event() and unregister_event() must be defined for the control file; - write "<event_fd> <control_fd> <args>" to cgroup.event_control. Interpretation of args is defined by control file implementation; eventfd will be woken up by control file implementation or when the cgroup is removed. To unregister notification handler just close eventfd. If you need notification functionality for a control file you have to implement callbacks register_event() and unregister_event() in the struct cftype. [kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix] Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Dan Malek <dan@embeddedalley.com> Cc: Vladislav Buzov <vbuzov@embeddedalley.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Alexander Shishkin <virtuoso@slind.org> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 3月, 2010 4 次提交
-
-
由 H Hartley Sweeten 提交于
The only in tree external users of the symbol setup_max_cpus are in arch/x86/. The files ./kernel/alternative.c, ./kernel/visws_quirks.c, and ./mm/kmemcheck/kmemcheck.c are all guarded by CONFIG_SMP being defined. For this case the symbol is an unsigned int and declared as an extern in include/linux/smp.h. When CONFIG_SMP is not defined the symbol setup_max_cpus is a constant value that is only used in init/main.c. Make the symbol static for this case. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
The symbol 'count' is a local global variable in this file. The function clean_rootfs() should use a different symbol name to prevent "symbol shadows an earlier one" noise. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andreas Mohr 提交于
- new Documentation/init.txt file describing various forms of failure trying to load the init binary after kernel bootup - extend the init/main.c init failure message to direct to Documentation/init.txt Signed-off-by: NAndreas Mohr <andi@lisas.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
There are quite a few GFP_KERNEL memory allocations made during suspend/hibernation and resume that may cause the system to hang, because the I/O operations they depend on cannot be completed due to the underlying devices being suspended. Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in gfp_allowed_mask before suspend/hibernation and restoring the original values of these bits in gfp_allowed_mask durig the subsequent resume. [akpm@linux-foundation.org: fix CONFIG_PM=n linkage] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-by: NMaxim Levitsky <maximlevitsky@gmail.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 3月, 2010 1 次提交
-
-
由 Eric W. Biederman 提交于
To avoid potential problems with an empty /dev open /dev/console from rootfs instead of waiting to mount our root filesystem and mounting it there. This effectively guarantees that there will be a device node, and it won't be on a filesystem that we will ever unmount, so there are no issues with leaving /dev/console open and pinning the filesystem. This is actually more effective than automatically mounting devtmpfs on /dev because it removes removes the occasionally problematic assumption that /dev/console exists from the boot code. With this patch I was able to throw busybox on my /boot partition (which has no /dev directory) and boot into userspace without problems. The only possible negative consequence I can think of is that someone out there deliberately used did not use a character device that is major 5 minor 2 for /dev/console. Does anyone know of a situation in which that could make sense? Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 2月, 2010 1 次提交
-
-
由 Robert Richter 提交于
OProfile is already used for a long time and no longer experimental. Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
- 25 2月, 2010 2 次提交
-
-
由 Paul E. McKenney 提交于
Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul E. McKenney 提交于
Update the rcu_dereference() usages to take advantage of the new lockdep-based checking. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-6-git-send-email-paulmck@linux.vnet.ibm.com> [ -v2: fix allmodconfig missing symbol export build failure on x86 ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 2月, 2010 2 次提交
-
-
由 Yinghai Lu 提交于
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS. Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config. -v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of NR_CPUS. -v3: add doc in kernel-parameters.txt according to Andrew. Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com>
-
由 Yinghai Lu 提交于
Prepare for using radix trees in early_irq_init(). Signed-off-by: NYinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-30-git-send-email-yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 14 2月, 2010 1 次提交
-
-
由 Don Zickus 提交于
Determines if an arch has setup arch specific perf_events and nmi_watchdog code. This should restrict compiles to only those arches ready. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: aris@redhat.com LKML-Reference: <1266013161-31197-1-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 2月, 2010 1 次提交
-
-
由 Eric Paris 提交于
ima wants to create an inode information struct (iint) when inodes are allocated. This means that at least the part of ima which does this allocation (the allocation is filled with information later) should before any inodes are created. To accomplish this we split the ima initialization routine placing the kmem cache allocator inside a security_initcall() function. Since this makes use of radix trees we also need to make sure that is initialized before security_initcall(). Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 02 2月, 2010 1 次提交
-
-
由 Roland McGrath 提交于
This adds CROSS_COMPILE as a kconfig string so you can store it in .config. Then you can use plain "make" in the configured kernel build directory to do the right cross compilation without setting the command-line or environment variable every time. With this, you can set up different build directories for different kernel configurations, whether native or cross-builds, and then use the simple: make -C /build/dir M=module-source-dir idiom to build modules for any given target kernel, indicating which one by nothing but the build directory chosen. I tried a version that defaults the string with env="CROSS_COMPILE" so that in a "make oldconfig" with CROSS_COMPILE in the environment you can just hit return to store the way you're building it. But the kconfig prompt for strings doesn't give you any way to say you want an empty string instead of the default, so I punted that. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Anibal Monsalve Salazar <anibal@debian.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 21 1月, 2010 1 次提交
-
-
由 Dhaval Giani 提交于
Remove the USER_SCHED feature. It has been scheduled to be removed in 2.6.34 as per http://marc.info/?l=linux-kernel&m=125728479022976&w=2Signed-off-by: NDhaval Giani <dhaval.giani@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1263990378.24844.3.camel@localhost> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 1月, 2010 1 次提交
-
-
由 Albin Tonnerre 提交于
This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: NWu Zhangjin <wuzhangjin@gmail.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: NRussell King <rmk@arm.linux.org.uk> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2010 1 次提交
-
-
由 Steffen Klassert 提交于
This patch introduces an interface to process data objects in parallel. The parallelized objects return after serialization in the same order as they were before the parallelization. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 28 12月, 2009 1 次提交
-
-
由 Li Zefan 提交于
Quoted from Ingo: | This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE - | it's an unnecessary Kconfig complication. If both PERF_EVENTS and | EVENT_TRACING is enabled we should expose generic tracepoints. | | Nor is it limited to event 'profiling', so it has become a misnomer as | well. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 12月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
A UP machine has 1 active cpu, not having the boot-cpu in the active map when starting the scheduler confuses things. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091216170517.423469527@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-