- 18 8月, 2009 1 次提交
-
-
由 Hiroshi Shimamoto 提交于
The field stack_canary is only used with CC_STACKPROTECTOR. This patch reduces task_struct size without CC_STACKPROTECTOR. Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> LKML-Reference: <4A8A44CA.2020701@ct.jp.nec.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 8月, 2009 1 次提交
-
-
由 Arnd Bergmann 提交于
The PREEMPT_ACTIVE setting doesn't actually need to be arch-specific, so set up a sane default for all arches to (hopefully) migrate to. > if we look at linux/hardirq.h, it makes this claim: > * - bit 28 is the PREEMPT_ACTIVE flag > if that's true, then why are we letting any arch set this define ? a > quick survey shows that half the arches (11) are using 0x10000000 (bit > 28) while the other half (10) are using 0x4000000 (bit 26). and then > there is the ia64 oddity which uses bit 30. the exact value here > shouldnt really matter across arches though should it ? actually alpha, arm and avr32 also use bit 30 (0x40000000), there are only five (or eight, depending on how you count) architectures (blackfin, h8300, m68k, s390 and sparc) using bit 26. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 8月, 2009 13 次提交
-
-
由 Ingo Molnar 提交于
This build bug: In file included from kernel/sched.c:1765: kernel/sched_rt.c: In function ‘has_pushable_tasks’: kernel/sched_rt.c:1069: error: ‘struct rt_rq’ has no member named ‘pushable_tasks’ kernel/sched_rt.c: In function ‘pick_next_task_rt’: kernel/sched_rt.c:1084: error: ‘struct rq’ has no member named ‘post_schedule’ Triggers because both pushable_tasks and post_schedule are SMP-only fields. Move pushable_tasks() to the SMP section and #ifdef the post_schedule use. Cc: Gregory Haskins <ghaskins@novell.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Like sched_migrate_task(), set_cpus_allowed_ptr() should hold onto the migration thread too. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
A frequent mistake appears to be to call task_of() on a scheduler entity that is not actually a task, which can result in a wild pointer. Add a check to catch these mistakes. Suggested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Gregory Haskins 提交于
Reflect "active" cpus in the rq->rd->online field, instead of the online_map. The motivation is that things that use the root-domain code (such as cpupri) only care about cpus classified as "active" anyway. By synchronizing the root-domain state with the active map, we allow several optimizations. For instance, we can remove an extra cpumask_and from the scheduler hotpath by utilizing rq->rd->online (since it is now a cached version of cpu_active_map & rq->rd->span). Signed-off-by: NGregory Haskins <ghaskins@novell.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NMax Krasnyansky <maxk@qualcomm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090730145723.25226.24493.stgit@dev.haskins.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Gregory Haskins 提交于
We currently have an explicit "needs_post" vtable method which returns a stack variable for whether we should later run post-schedule. This leads to an awkward exchange of the variable as it bubbles back up out of the context switch. Peter Zijlstra observed that this information could be stored in the run-queue itself instead of handled on the stack. Therefore, we revert to the method of having context_switch return void, and update an internal rq->post_schedule variable when we require further processing. In addition, we fix a race condition where we try to access current->sched_class without holding the rq->lock. This is technically racy, as the sched-class could change out from under us. Instead, we reference the per-rq post_schedule variable with the runqueue unlocked, but with preemption disabled to see if we need to reacquire the rq->lock. Finally, we clean the code up slightly by removing the #ifdef CONFIG_SMP conditionals from the schedule() call, and implement some inline helper functions instead. This patch passes checkpatch, and rt-migrate. Signed-off-by: NGregory Haskins <ghaskins@novell.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090729150422.17691.55590.stgit@dev.haskins.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
We need to add the new prio to the cpupri accounting before removing the old prio. This is because removing the old prio first will open a race window where the cpu will be removed from pri_active. In this case the cpu will not be visible for RT push and pulls. This could cause a RT task to not migrate appropriately, and create a very large latency. This bug was found with the use of ftrace sched events and trace_printk. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090729042526.438281019@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
The current method for pushing RT tasks after scheduling only happens after a context switch. But we found cases where a task is set up on a run queue to be pushed but the push never happens because the schedule chooses the same task. This bug was found with the help of Gregory Haskins and the use of ftrace (trace_printk). It tooks several days for both of us analyzing the code and the trace output to find this. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090729042526.205923666@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
When cgroup group scheduling is built in, skip some code paths if we don't have any (but the root) cgroups configured. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Commit ec4e0e2f ("fix inconsistency when redistribute per-cpu tg->cfs_rq shares") broke cgroup smp fairness. In order to avoid starvation of newly placed tasks, we never quite set the share of an empty cpu group-task to 0, but instead we set it as if there's a single NICE-0 task present. If however we actually set this in cfs_rq[cpu]->shares, that means the total shares for that group will be slightly inflated every time we balance, causing the observed unfairness. Fix this by setting cfs_rq[cpu]->shares to 0 but actually setting the effective weight of the related se to the inflated number. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248696557.6987.1615.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Merge reason: avoid upcoming patch conflict. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Gregory Haskins 提交于
Background: Several race conditions in the scheduler have cropped up recently, which Steven and I have tracked down using ftrace. The most recent one turns out to be a race in how the scheduler determines a suitable migration target for RT tasks, introduced recently with commit: commit 68e74568 Date: Tue Nov 25 02:35:13 2008 +1030 sched: convert struct cpupri_vec cpumask_var_t. The original design of cpupri allowed lockless readers to quickly determine a best-estimate target. Races between the pri_active bitmap and the vec->mask were handled in the original code because we would detect and return "0" when this occured. The design was predicated on the *effective* atomicity (*) of caching the result of cpus_and() between the cpus_allowed and the vec->mask. Commit 68e74568 changed the behavior such that vec->mask is accessed multiple times. This introduces a subtle race, the result of which means we can have a result that returns "1", but with an empty bitmap. *) yes, we know cpus_and() is not a locked operator across the entire composite array, but it is implicitly atomic on a per-word basis which is all the design required to work. Implementation: Rather than forgoing the lockless design, or reverting to a stack-based cpumask_t, we simply check for when the race has been encountered and continue processing in the event that the race is hit. This renders the removal race as if the priority bit had been atomically cleared as well, and allows the algorithm to execute correctly. Signed-off-by: NGregory Haskins <ghaskins@novell.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Steven Rostedt <srostedt@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090730145728.25226.92769.stgit@dev.haskins.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
The latencytop and sleep accounting code assumes that any scheduler entity represents a task, this is not so. Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
The might_sleep() test inside cond_resched_lock() assumes the spinlock is held and then preemption is disabled. This is true with CONFIG_PREEMPT but the preempt_count() doesn't change otherwise. Check by starting from the appropriate preempt offset depending on the config. Reported-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1248458723-12146-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 8月, 2009 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: bump up nr_to_write in xfs_vm_writepage xfs: reduce bmv_count in xfs_vn_fiemap
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: io context: fix ref counting block: make the end_io functions be non-GPL exports block: fix improper kobject release in blk_integrity_unregister block: always assign default lock to queues mg_disk: Add missing ready status check on mg_write() mg_disk: fix issue with data integrity on error in mg_write() mg_disk: fix reading invalid status when use polling driver mg_disk: remove prohibited sleep operation
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: Save mult_orig in clocksource_disable()
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: orphan subsystem imxmmc: Remove unnecessary semicolons cb710: use SG_MITER_TO_SG/SG_MITER_FROM_SG sdhci: use SG_MITER_TO_SG/SG_MITER_FROM_SG lib/scatterlist: add a flags to signalize mapping direction
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa: Add kmalloc NULL tests ALSA: hda - Increase PCM stream name buf in patch_realtek.c sound: mpu401.c: Buffer overflow sound: aedsp16: Buffer overflow ALSA: hda: fix out-of-bound hdmi_eld.sad[] write ALSA: hda - Add quirk for Dell Studio 1555
-
- 31 7月, 2009 19 次提交
-
-
由 Magnus Damm 提交于
To fix the common case where ->enable() does not set up mult, make sure mult_orig is saved in mult on disable. Also add comments to explain why we do this. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Cc: johnstul@us.ibm.com Cc: lethal@linux-sh.org Cc: akpm@linux-foundation.org LKML-Reference: <20090618152432.10136.9932.sendpatchset@rx1.opensource.se> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pierre Ossman 提交于
I do not have the time to take care of this, so remove myself as maintainer. Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NPavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
so the page will be flushed on unmap on ARCH which need it. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
sg_miter_start() is currently unaware of the direction of the copy process (to or from the scatter list). It is important to know the direction because the page has to be flushed in case the data written is seen on a different mapping in user land on cache incoherent architectures. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NPierre Ossman <pierre@ossman.eu>
-
由 Takashi Iwai 提交于
* fix/oss: sound: mpu401.c: Buffer overflow sound: aedsp16: Buffer overflow
-
由 Takashi Iwai 提交于
* fix/misc: ALSA: sound/aoa: Add kmalloc NULL tests
-
由 Takashi Iwai 提交于
* fix/hda: ALSA: hda - Increase PCM stream name buf in patch_realtek.c ALSA: hda: fix out-of-bound hdmi_eld.sad[] write ALSA: hda - Add quirk for Dell Studio 1555
-
由 Julia Lawall 提交于
Check that the result of kzalloc is not NULL before a dereference. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Li Zefan 提交于
Commit d9c7d394 ("block: prevent possible io_context->refcount overflow") mistakenly changed atomic_inc(&ioc->nr_tasks) to atomic_long_inc(&ioc->refcount). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Eric Sandeen 提交于
VM calculation for nr_to_write seems off. Bump it way up, this gets simple streaming writes zippy again. To be reviewed again after Jens' writeback changes. Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Cc: Chris Mason <chris.mason@oracle.com> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
由 Eric Sandeen 提交于
commit 6321e3ed caused the full bmv_count's worth of getbmapx structures to get allocated; telling it to do MAXEXTNUM was a bit insane, resulting in ENOMEM every time. Chop it down to something reasonable, the number of slots in the caller's input buffer. If this is too large the caller may get ENOMEM but the reason should not be a mystery, and they can try again with something smaller. We add 1 to the value because in the normal getbmap world, bmv_count includes the header and xfs_getbmap does: nex = bmv->bmv_count - 1; if (nex <= 0) return XFS_ERROR(EINVAL); Signed-off-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NOlaf Weber <olaf@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing/stat: Fix seqfile memory leak function-graph: Fix seqfile memory leak trace_stack: Fix seqfile memory leak profile: Suppress warning about large allocations when profile=1 is specified
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: be more polite in the async caching threads Btrfs: preserve commit_root for async caching
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: at_hdmac: add DMA slave transfers dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller dmaengine: dmatest: correct thread_count while using multiple thread per channel dmaengine: dmatest: add a maximum number of test iterations drivers/dma: Remove unnecessary semicolons drivers/dma/fsldma.c: Remove unnecessary semicolons dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA fsldma: do not clear bandwidth control bits on the 83xx controller fsldma: enable external start for the 83xx controller fsldma: use PCI Read Multiple command
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: Fix loading of VAT inode when drive wrongly reports number of recorded blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: quota: Silence lockdep on quota_on
-