Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dmaengine: at_hdmac: add DMA slave transfers
  dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller
  dmaengine: dmatest: correct thread_count while using multiple thread per channel
  dmaengine: dmatest: add a maximum number of test iterations
  drivers/dma: Remove unnecessary semicolons
  drivers/dma/fsldma.c: Remove unnecessary semicolons
  dmaengine: move HIGHMEM64G restriction to ASYNC_TX_DMA
  fsldma: do not clear bandwidth control bits on the 83xx controller
  fsldma: enable external start for the 83xx controller
  fsldma: use PCI Read Multiple command

arch/arm/mach-at91/include/mach/at_hdmac.h

+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */

crypto/async_tx/async_xor.c

@@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum);
 
 static int __init async_xor_init(void)
 {
-	#ifdef CONFIG_DMA_ENGINE
+	#ifdef CONFIG_ASYNC_TX_DMA
 	/* To conserve stack space the input src_list (array of page pointers)
 	 * is reused to hold the array of dma addresses passed to the driver.
 	 * This conversion is only possible when dma_addr_t is less than the

drivers/dma/Kconfig

@@ -4,7 +4,7 @@
 
 menuconfig DMADEVICES
 	bool "DMA Engine support"
-	depends on !HIGHMEM64G && HAS_DMA
+	depends on HAS_DMA
 	help
 	  DMA engines can do asynchronous data transfers without
 	  involving the host CPU.  Currently, this framework can be
@@ -46,6 +46,14 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller.  This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
+config AT_HDMAC
+	tristate "Atmel AHB DMA support"
+	depends on ARCH_AT91SAM9RL
+	select DMA_ENGINE
+	help
+	  Support the Atmel AHB DMA controller.  This can be integrated in
+	  chips such as the Atmel AT91SAM9RL.
+
 config FSL_DMA
 	tristate "Freescale Elo and Elo Plus DMA support"
 	depends on FSL_SOC
@@ -108,7 +116,7 @@ config NET_DMA
 
 config ASYNC_TX_DMA
 	bool "Async_tx: Offload support for the async_tx api"
-	depends on DMA_ENGINE
+	depends on DMA_ENGINE && !HIGHMEM64G
 	help
 	  This allows the async_tx api to take advantage of offload engines for
 	  memcpy, memset, xor, and raid6 p+q operations.  If your platform has

drivers/dma/Makefile

@@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o

drivers/dma/at_hdmac_regs.h

+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define	AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define	AT_DMA_MAX_NR_CHANNELS	8
+
+
+#define	AT_DMA_GCFG	0x00	/* Global Configuration Register */
+#define		AT_DMA_IF_BIGEND(i)	(0x1 << (i))	/* AHB-Lite Interface i in Big-endian mode */
+#define		AT_DMA_ARB_CFG	(0x1 << 4)	/* Arbiter mode. */
+#define			AT_DMA_ARB_CFG_FIXED		(0x0 << 4)
+#define			AT_DMA_ARB_CFG_ROUND_ROBIN	(0x1 << 4)
+
+#define	AT_DMA_EN	0x04	/* Controller Enable Register */
+#define		AT_DMA_ENABLE	(0x1 << 0)
+
+#define	AT_DMA_SREQ	0x08	/* Software Single Request Register */
+#define		AT_DMA_SSREQ(x)	(0x1 << ((x) << 1))		/* Request a source single transfer on channel x */
+#define		AT_DMA_DSREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination single transfer on channel x */
+
+#define	AT_DMA_CREQ	0x0C	/* Software Chunk Transfer Request Register */
+#define		AT_DMA_SCREQ(x)	(0x1 << ((x) << 1))		/* Request a source chunk transfer on channel x */
+#define		AT_DMA_DCREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination chunk transfer on channel x */
+
+#define	AT_DMA_LAST	0x10	/* Software Last Transfer Flag Register */
+#define		AT_DMA_SLAST(x)	(0x1 << ((x) << 1))		/* This src rq is last tx of buffer on channel x */
+#define		AT_DMA_DLAST(x)	(0x1 << (1 + ((x) << 1)))	/* This dst rq is last tx of buffer on channel x */
+
+#define	AT_DMA_SYNC	0x14	/* Request Synchronization Register */
+#define		AT_DMA_SYR(h)	(0x1 << (h))			/* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define	AT_DMA_EBCIER	0x18	/* Enable register */
+#define	AT_DMA_EBCIDR	0x1C	/* Disable register */
+#define	AT_DMA_EBCIMR	0x20	/* Mask Register */
+#define	AT_DMA_EBCISR	0x24	/* Status Register */
+#define		AT_DMA_CBTC_OFFSET	8
+#define		AT_DMA_ERR_OFFSET	16
+#define		AT_DMA_BTC(x)	(0x1 << (x))
+#define		AT_DMA_CBTC(x)	(0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define		AT_DMA_ERR(x)	(0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define	AT_DMA_CHER	0x28	/* Channel Handler Enable Register */
+#define		AT_DMA_ENA(x)	(0x1 << (x))
+#define		AT_DMA_SUSP(x)	(0x1 << ( 8 + (x)))
+#define		AT_DMA_KEEP(x)	(0x1 << (24 + (x)))
+
+#define	AT_DMA_CHDR	0x2C	/* Channel Handler Disable Register */
+#define		AT_DMA_DIS(x)	(0x1 << (x))
+#define		AT_DMA_RES(x)	(0x1 << ( 8 + (x)))
+
+#define	AT_DMA_CHSR	0x30	/* Channel Handler Status Register */
+#define		AT_DMA_EMPT(x)	(0x1 << (16 + (x)))
+#define		AT_DMA_STAL(x)	(0x1 << (24 + (x)))
+
+
+#define	AT_DMA_CH_REGS_BASE	0x3C	/* Channel registers base address */
+#define	ch_regs(x)	(AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define	ATC_SADDR_OFFSET	0x00	/* Source Address Register */
+#define	ATC_DADDR_OFFSET	0x04	/* Destination Address Register */
+#define	ATC_DSCR_OFFSET		0x08	/* Descriptor Address Register */
+#define	ATC_CTRLA_OFFSET	0x0C	/* Control A Register */
+#define	ATC_CTRLB_OFFSET	0x10	/* Control B Register */
+#define	ATC_CFG_OFFSET		0x14	/* Configuration Register */
+#define	ATC_SPIP_OFFSET		0x18	/* Src PIP Configuration Register */
+#define	ATC_DPIP_OFFSET		0x1C	/* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define	ATC_DSCR_IF(i)		(0x3 & (i))	/* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define	ATC_BTSIZE_MAX		0xFFFFUL	/* Maximum Buffer Transfer Size */
+#define	ATC_BTSIZE(x)		(ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define	ATC_SRC_WIDTH_MASK	(0x3 << 24)	/* Source Single Transfer Size */
+#define		ATC_SRC_WIDTH(x)	((x) << 24)
+#define		ATC_SRC_WIDTH_BYTE	(0x0 << 24)
+#define		ATC_SRC_WIDTH_HALFWORD	(0x1 << 24)
+#define		ATC_SRC_WIDTH_WORD	(0x2 << 24)
+#define	ATC_DST_WIDTH_MASK	(0x3 << 28)	/* Destination Single Transfer Size */
+#define		ATC_DST_WIDTH(x)	((x) << 28)
+#define		ATC_DST_WIDTH_BYTE	(0x0 << 28)
+#define		ATC_DST_WIDTH_HALFWORD	(0x1 << 28)
+#define		ATC_DST_WIDTH_WORD	(0x2 << 28)
+#define	ATC_DONE		(0x1 << 31)	/* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define	ATC_SIF(i)		(0x3 & (i))	/* Src tx done via AHB-Lite Interface i */
+#define	ATC_DIF(i)		((0x3 & (i)) <<  4)	/* Dst tx done via AHB-Lite Interface i */
+#define	ATC_SRC_PIP		(0x1 <<  8)	/* Source Picture-in-Picture enabled */
+#define	ATC_DST_PIP		(0x1 << 12)	/* Destination Picture-in-Picture enabled */
+#define	ATC_SRC_DSCR_DIS	(0x1 << 16)	/* Src Descriptor fetch disable */
+#define	ATC_DST_DSCR_DIS	(0x1 << 20)	/* Dst Descriptor fetch disable */
+#define	ATC_FC_MASK		(0x7 << 21)	/* Choose Flow Controller */
+#define		ATC_FC_MEM2MEM		(0x0 << 21)	/* Mem-to-Mem (DMA) */
+#define		ATC_FC_MEM2PER		(0x1 << 21)	/* Mem-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM		(0x2 << 21)	/* Periph-to-Mem (DMA) */
+#define		ATC_FC_PER2PER		(0x3 << 21)	/* Periph-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM_PER	(0x4 << 21)	/* Periph-to-Mem (Peripheral) */
+#define		ATC_FC_MEM2PER_PER	(0x5 << 21)	/* Mem-to-Periph (Peripheral) */
+#define		ATC_FC_PER2PER_SRCPER	(0x6 << 21)	/* Periph-to-Periph (Src Peripheral) */
+#define		ATC_FC_PER2PER_DSTPER	(0x7 << 21)	/* Periph-to-Periph (Dst Peripheral) */
+#define	ATC_SRC_ADDR_MODE_MASK	(0x3 << 24)
+#define		ATC_SRC_ADDR_MODE_INCR	(0x0 << 24)	/* Incrementing Mode */
+#define		ATC_SRC_ADDR_MODE_DECR	(0x1 << 24)	/* Decrementing Mode */
+#define		ATC_SRC_ADDR_MODE_FIXED	(0x2 << 24)	/* Fixed Mode */
+#define	ATC_DST_ADDR_MODE_MASK	(0x3 << 28)
+#define		ATC_DST_ADDR_MODE_INCR	(0x0 << 28)	/* Incrementing Mode */
+#define		ATC_DST_ADDR_MODE_DECR	(0x1 << 28)	/* Decrementing Mode */
+#define		ATC_DST_ADDR_MODE_FIXED	(0x2 << 28)	/* Fixed Mode */
+#define	ATC_IEN			(0x1 << 30)	/* BTC interrupt enable (active low) */
+#define	ATC_AUTO		(0x1 << 31)	/* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define	ATC_SPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_SPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define	ATC_DPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_DPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+
+/*--  descriptors  -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+	/* values that are not changed by hardware */
+	dma_addr_t	saddr;
+	dma_addr_t	daddr;
+	/* value that may get written back: */
+	u32		ctrla;
+	/* more values that are not changed by hardware */
+	u32		ctrlb;
+	dma_addr_t	dscr;	/* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+	/* FIRST values the hardware uses */
+	struct at_lli			lli;
+
+	/* THEN values for driver housekeeping */
+	struct dma_async_tx_descriptor	txd;
+	struct list_head		desc_node;
+	size_t				len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct at_desc, txd);
+}
+
+
+/*--  Channels  --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ *                to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+	struct dma_chan		chan_common;
+	struct at_dma		*device;
+	void __iomem		*ch_regs;
+	u8			mask;
+	unsigned long		error_status;
+	struct tasklet_struct	tasklet;
+
+	spinlock_t		lock;
+
+	/* these other elements are all protected by lock */
+	dma_cookie_t		completed_cookie;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	unsigned int		descs_allocated;
+};
+
+#define	channel_readl(atchan, name) \
+	__raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define	channel_writel(atchan, name, val) \
+	__raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+	return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*--  Controller  ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+	struct dma_device	dma_common;
+	void __iomem		*regs;
+	struct clk		*clk;
+
+	u8			all_chan_mask;
+
+	struct dma_pool		*dma_desc_pool;
+	/* AT THE END channels table */
+	struct at_dma_chan	chan[0];
+};
+
+#define	dma_readl(atdma, name) \
+	__raw_readl((atdma)->regs + AT_DMA_##name)
+#define	dma_writel(atdma, name, val) \
+	__raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+	return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*--  Helper functions  ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+	return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel %d : imr = 0x%x, chsr = 0x%x\n",
+		atchan->chan_common.chan_id,
+		dma_readl(atdma, EBCIMR),
+		dma_readl(atdma, CHSR));
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+		channel_readl(atchan, SADDR),
+		channel_readl(atchan, DADDR),
+		channel_readl(atchan, CTRLA),
+		channel_readl(atchan, CTRLB),
+		channel_readl(atchan, CFG),
+		channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+	dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+			"  desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+			lli->saddr, lli->daddr,
+			lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+	u32		ebci;
+
+	/* enable interrupts on buffer chain completion & error */
+	ebci =    AT_DMA_CBTC(atchan->chan_common.chan_id)
+		| AT_DMA_ERR(atchan->chan_common.chan_id);
+	if (on)
+		dma_writel(atdma, EBCIER, ebci);
+	else
+		dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+	desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+	desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */

drivers/dma/dmatest.c

@@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
 MODULE_PARM_DESC(max_channels,
 		"Maximum number of channels to use (default: all)");
 
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+		"Iterations before stopping test (default: infinite)");
+
 static unsigned int xor_sources = 3;
 module_param(xor_sources, uint, S_IRUGO);
 MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		for ( ; i < start + len; i++)
 			buf[i] = PATTERN_SRC | PATTERN_COPY
-				| (~i & PATTERN_COUNT_MASK);;
+				| (~i & PATTERN_COUNT_MASK);
 		for ( ; i < test_buf_size; i++)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		buf++;
@@ -270,7 +275,8 @@ static int dmatest_func(void *data)
 
 	flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
 
-	while (!kthread_should_stop()) {
+	while (!kthread_should_stop()
+	       && !(iterations && total_tests >= iterations)) {
 		struct dma_device *dev = chan->device;
 		struct dma_async_tx_descriptor *tx = NULL;
 		dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@ static int dmatest_func(void *data)
 err_srcs:
 	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
 			thread_name, total_tests, failed_tests, ret);
+
+	if (iterations > 0)
+		while (!kthread_should_stop()) {
+			DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+			interruptible_sleep_on(&wait_dmatest_exit);
+		}
+
 	return ret;
 }
 
@@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
 
 	if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_XOR);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 
 	pr_info("dmatest: Started %u threads using %s\n",

drivers/dma/fsldma.c

@@ -12,6 +12,11 @@
  *   also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
  *   The support for MPC8349 DMA contorller is also added.
  *
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
  * This is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
 	case FSL_DMA_IP_83XX:
 		/* Set the channel to below modes:
 		 * EOTIE - End-of-transfer interrupt enable
+		 * PRC_RM - PCI read multiple
 		 */
-		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
-				32);
+		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+				| FSL_DMA_MR_PRC_RM, 32);
 		break;
 	}
 
@@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
 
 static void dma_start(struct fsl_dma_chan *fsl_chan)
 {
-	u32 mr_set = 0;;
+	u32 mr_set = 0;
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
 		mr_set |= FSL_DMA_MR_EMP_EN;
-	} else
+	} else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 			DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
 				& ~FSL_DMA_MR_EMP_EN, 32);
+	}
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
 		mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 
 	switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
 	case FSL_DMA_IP_85XX:
-		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
 	case FSL_DMA_IP_83XX:
+		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
 		new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
 	}

drivers/dma/fsldma.h

@@ -38,6 +38,7 @@
 
 /* Special MR definition for MPC8349 */
 #define FSL_DMA_MR_EOTIE	0x00000080
+#define FSL_DMA_MR_PRC_RM	0x00000800
 
 #define FSL_DMA_SR_CH		0x00000020
 #define FSL_DMA_SR_PE		0x00000010

drivers/dma/mv_xor.c

@@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
 	if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
 		dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
-		dma_dev->max_xor = 8;                  ;
+		dma_dev->max_xor = 8;
 		dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
 	}