arm: dts: mt7623: update usb related nodes

The current usb related nodes are out-of-date, so we make them be
consistent with the binding documents.
Signed-off-by: NRyder Lee <ryder.lee@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

arch/arm/boot/dts/mt7623.dtsi

@@ -680,7 +680,7 @@ usb1: usb@1a1c0000 {
 		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
 			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
+		clock-names = "sys_ck", "ref_ck";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
 		phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
 		status = "disabled";
@@ -690,8 +690,6 @@ u3phy1: usb-phy@1a1c4000 {
 		compatible = "mediatek,mt7623-u3phy",
 			     "mediatek,mt2701-u3phy";
 		reg = <0 0x1a1c4000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -699,12 +697,16 @@ u3phy1: usb-phy@1a1c4000 {
 
 		u2port0: usb-phy@1a1c4800 {
 			reg = <0 0x1a1c4800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
 		u3port0: usb-phy@1a1c4900 {
 			reg = <0 0x1a1c4900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
@@ -719,7 +721,7 @@ usb2: usb@1a240000 {
 		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
 			 <&topckgen CLK_TOP_ETHIF_SEL>;
-		clock-names = "sys_ck", "free_ck";
+		clock-names = "sys_ck", "ref_ck";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
 		phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
 		status = "disabled";
@@ -729,8 +731,6 @@ u3phy2: usb-phy@1a244000 {
 		compatible = "mediatek,mt7623-u3phy",
 			     "mediatek,mt2701-u3phy";
 		reg = <0 0x1a244000 0 0x0700>;
-		clocks = <&clk26m>;
-		clock-names = "u3phya_ref";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -738,12 +738,16 @@ u3phy2: usb-phy@1a244000 {
 
 		u2port1: usb-phy@1a244800 {
 			reg = <0 0x1a244800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};
 
 		u3port1: usb-phy@1a244900 {
 			reg = <0 0x1a244900 0 0x0700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
 			#phy-cells = <1>;
 			status = "okay";
 		};