提交 37e79cbf 编写于 作者: L Linus Torvalds

Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh

SH/R-Mobile fixes for 3.3-rc5

* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh:
  arch/arm/mach-shmobile/board-ag5evm.c: included linux/dma-mapping.h twice
  ARM: mach-shmobile: r8a7779 PFC IPSR4 fix
  ARM: mach-shmobile: sh73a0 PSTR 32-bit access fix
  ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372
  ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support
  arm: fix compile failure in mach-shmobile/board-ag5evm.c
  ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment
  ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd
  ARM: mach-shmobile: simplify MMCIF DMA configuration
  ARM: mach-shmobile: IRQ driven GPIO key support for Kota2
  ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix
  ARM: mach-shmobile: sh73a0 PINT IRQ base fix
......@@ -30,6 +30,7 @@
#include <linux/serial_sci.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
......@@ -37,7 +38,6 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
......@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device mmc_device = {
......@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
},
};
#define DSI0PHYCR 0xe615006c
static int sh_mipi_set_dot_clock(struct platform_device *pdev,
void __iomem *base,
int enable)
{
struct clk *pck;
struct clk *pck, *phy;
int ret;
pck = clk_get(&pdev->dev, "dsip_clk");
......@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
goto sh_mipi_set_dot_clock_pck_err;
}
phy = clk_get(&pdev->dev, "dsiphy_clk");
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
goto sh_mipi_set_dot_clock_phy_err;
}
if (enable) {
clk_set_rate(pck, clk_round_rate(pck, 24000000));
__raw_writel(0x2a809010, DSI0PHYCR);
clk_set_rate(phy, clk_round_rate(pck, 510000000));
clk_enable(pck);
clk_enable(phy);
} else {
clk_disable(pck);
clk_disable(phy);
}
ret = 0;
clk_put(phy);
sh_mipi_set_dot_clock_phy_err:
clk_put(pck);
sh_mipi_set_dot_clock_pck_err:
return ret;
}
......
......@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
......@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
......
......@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
static struct gpio_keys_platform_data gpio_key_info = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
.poll_interval = 250, /* polled for now */
};
static struct platform_device gpio_keys_device = {
.name = "gpio-keys-polled", /* polled for now */
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &gpio_key_info,
......
......@@ -43,7 +43,6 @@
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
......@@ -145,11 +144,6 @@
* 1-2 short | VBUS 5V | Host
* open | external VBUS | Function
*
* *1
* CN31 is used as
* CONFIG_USB_R8A66597_HCD Host
* CONFIG_USB_RENESAS_USBHS Function
*
* CAUTION
*
* renesas_usbhs driver can use external interrupt mode
......@@ -161,15 +155,6 @@
* mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
* because Touchscreen is using IRQ7-PORT40.
* It is impossible to use IRQ7 demux on this board.
*
* We can use external interrupt mode USB-Function on "USB1".
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
* IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
* This mean its register will be broken if it supports shared IRQ,
*/
/*
......@@ -207,6 +192,16 @@
*
*/
/*
* FSI - AK4642
*
* it needs amixer settings for playing
*
* amixer set "Headphone" on
* amixer set "HPOUTL Mixer DACH" on
* amixer set "HPOUTR Mixer DACH" on
*/
/*
* FIXME !!
*
......@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
* Use J30 to select between Host and Function. This setting
* can however not be detected by software. Hotplug of USBHS1
* is provided via IRQ8.
*
* Current USB1 works as "USB Host".
* - set J30 "short"
*
* If you want to use it as "USB gadget",
* - J30 "open"
* - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
* - add .get_vbus = usbhs_get_vbus in usbhs1_private
*/
#define IRQ8 evt2irq(0x0300)
/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
return;
/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
}
static struct r8a66597_platdata usb1_host_data = {
.on_chip = 1,
.port_power = usb1_host_port_power,
};
static struct resource usb1_host_resources[] = {
[0] = {
.name = "USBHS1",
.start = 0xe68b0000,
.end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb1_host_device = {
.name = "r8a66597_hcd",
.id = 1,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &usb1_host_data,
},
.num_resources = ARRAY_SIZE(usb1_host_resources),
.resource = usb1_host_resources,
};
/* USBHS1 USB Function support via renesas_usbhs */
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
......@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
static int usbhs1_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
return USBHS_HOST;
}
static u32 usbhs1_pipe_cfg[] = {
......@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
.hardware_exit = usbhs1_hardware_exit,
.get_id = usbhs1_get_id,
.phy_reset = usbhs_phy_reset,
.get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
......@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh_mmcif_dma = {
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
},
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
......@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.dma = &sh_mmcif_dma,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
......@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
&usb1_host_device,
&usbhs1_device,
&usbhs0_device,
&leds_device,
......@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
/* USB phy tweak to make the r8a66597_hcd host driver work */
__raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
gpio_request(GPIO_FN_FSIAILR, NULL);
......
......@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
};
/* DSI DIV */
static unsigned long dsiphy_recalc(struct clk *clk)
{
u32 value;
value = __raw_readl(clk->mapping->base);
/* FIXME */
if (!(value & 0x000B8000))
return clk->parent->rate;
value &= 0x3f;
value += 1;
if ((value < 12) ||
(value > 33)) {
pr_err("DSIPHY has wrong value (%d)", value);
return 0;
}
return clk->parent->rate / value;
}
static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
{
return clk_rate_mult_range_round(clk, 12, 33, rate);
}
static void dsiphy_disable(struct clk *clk)
{
u32 value;
value = __raw_readl(clk->mapping->base);
value &= ~0x000B8000;
__raw_writel(value , clk->mapping->base);
}
static int dsiphy_enable(struct clk *clk)
{
u32 value;
int multi;
value = __raw_readl(clk->mapping->base);
multi = (value & 0x3f) + 1;
if ((multi < 12) || (multi > 33))
return -EIO;
__raw_writel(value | 0x000B8000, clk->mapping->base);
return 0;
}
static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
{
u32 value;
int idx;
idx = rate / clk->parent->rate;
if ((idx < 12) || (idx > 33))
return -EINVAL;
idx += -1;
value = __raw_readl(clk->mapping->base);
value = (value & ~0x3f) + idx;
__raw_writel(value, clk->mapping->base);
return 0;
}
static struct clk_ops dsiphy_clk_ops = {
.recalc = dsiphy_recalc,
.round_rate = dsiphy_round_rate,
.set_rate = dsiphy_set_rate,
.enable = dsiphy_enable,
.disable = dsiphy_disable,
};
static struct clk_mapping dsi0phy_clk_mapping = {
.phys = DSI0PHYCR,
.len = 4,
};
static struct clk_mapping dsi1phy_clk_mapping = {
.phys = DSI1PHYCR,
.len = 4,
};
static struct clk dsi0phy_clk = {
.ops = &dsiphy_clk_ops,
.parent = &div6_clks[DIV6_DSI0P], /* late install */
.mapping = &dsi0phy_clk_mapping,
};
static struct clk dsi1phy_clk = {
.ops = &dsiphy_clk_ops,
.parent = &div6_clks[DIV6_DSI1P], /* late install */
.mapping = &dsi1phy_clk_mapping,
};
static struct clk *late_main_clks[] = {
&dsi0phy_clk,
&dsi1phy_clk,
};
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
......@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
......@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
if (!ret)
ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
......
......@@ -515,8 +515,8 @@ enum {
SHDMA_SLAVE_MMCIF_RX,
};
/* PINT interrupts are located at Linux IRQ 768 and up */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
/* PINT interrupts are located at Linux IRQ 800 and up */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
#endif /* __ASM_SH73A0_H__ */
......@@ -19,6 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sh_intc.h>
......@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
handle_level_irq, "level");
set_irq_flags(n, IRQF_VALID); /* yuck */
......
......@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
FN_AUDATA3, 0, 0, 0 }
},
{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
3, 1, 1, 1, 1, 1, 1, 3, 3,
1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
/* IP4_31_29 [3] */
FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
......
......@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
......@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
{ },
};
#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
static struct pinmux_irq pinmux_irqs[] = {
PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
};
static struct pinmux_info sh7372_pinmux_info = {
.name = "sh7372_pfc",
.reserved_id = PINMUX_RESERVED,
......@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
.gpio_data = pinmux_data,
.gpio_data_size = ARRAY_SIZE(pinmux_data),
.gpio_irq = pinmux_irqs,
.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
};
void sh7372_pinmux_init(void)
......
......@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
__raw_writel(1 << cpu, __io(WUPCR)); /* wake up */
else
__raw_writel(1 << cpu, __io(SRESCR)); /* reset */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册