提交 0e69e084 编写于 作者: L Linus Torvalds

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

SuperH fixes for 3.3-rc5

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix sh2a build error for CONFIG_CACHE_WRITETHROUGH
  sh: modify a resource of sh_eth_giga1_resources in board-sh7757lcr
  arch/sh: remove references to cpu_*_map.
  sh: Fix typo in pci-sh7780.c
  sh: add platform_device for SPI1 in setup-sh7757
  sh: modify resource for SPI0 in setup-sh7757
  sh: se7724: fix compile breakage
  sh: clkfwk: bugfix: use clk_reparent() for div6 clocks
  sh: clock-sh7724: fixup sh_fsi clock settings
  sh: sh7757lcr: update to the new MMCIF DMA configuration
  sh: fix the sh_mmcif_plat_data in board-sh7757lcr
  video: pvr2fb: Fix up spurious section mismatch warnings.
  sh: Defer to asm-generic/device.h.
......@@ -168,6 +168,11 @@ static struct resource sh_eth_giga1_resources[] = {
.start = 0xfee00800,
.end = 0xfee00fff,
.flags = IORESOURCE_MEM,
}, {
/* TSU */
.start = 0xfee01800,
.end = 0xfee01fff,
.flags = IORESOURCE_MEM,
}, {
.start = 316,
.end = 316,
......@@ -210,20 +215,13 @@ static struct resource sh_mmcif_resources[] = {
},
};
static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
.chan_priv_tx = {
.slave_id = SHDMA_SLAVE_MMCIF_TX,
},
.chan_priv_rx = {
.slave_id = SHDMA_SLAVE_MMCIF_RX,
}
};
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.dma = &sh7757lcr_mmcif_dma,
.sup_pclk = 0x0f,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
MMC_CAP_NONREMOVABLE,
.ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device = {
......
......@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
......
......@@ -29,9 +29,11 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/sh_eth.h>
#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
......
......@@ -22,6 +22,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
#include <media/sh_mobile_ceu.h>
......
......@@ -21,9 +21,11 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/tw9910.h>
#include <asm/clock.h>
#include <asm/machvec.h>
......
......@@ -24,6 +24,7 @@
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <linux/sh_eth.h>
#include <linux/videodev2.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
......
......@@ -74,7 +74,7 @@ struct pci_errors {
{ SH4_PCIINT_MLCK, "master lock error" },
{ SH4_PCIINT_TABT, "target-target abort" },
{ SH4_PCIINT_TRET, "target retry time out" },
{ SH4_PCIINT_MFDE, "master function disable erorr" },
{ SH4_PCIINT_MFDE, "master function disable error" },
{ SH4_PCIINT_PRTY, "address parity error" },
{ SH4_PCIINT_SERR, "SERR" },
{ SH4_PCIINT_TWDP, "data parity error for target write" },
......
......@@ -3,9 +3,10 @@
*
* This file is released under the GPLv2
*/
#ifndef __ASM_SH_DEVICE_H
#define __ASM_SH_DEVICE_H
struct dev_archdata {
};
#include <asm-generic/device.h>
struct platform_device;
/* allocate contiguous memory chunk and fill in struct resource */
......@@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev,
void plat_early_device_setup(void);
struct pdev_archdata {
};
#endif /* __ASM_SH_DEVICE_H */
......@@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]),
CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]),
CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]),
CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]),
CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]),
CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]),
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]),
......
......@@ -133,7 +133,7 @@ static struct resource spi0_resources[] = {
[0] = {
.start = 0xfe002000,
.end = 0xfe0020ff,
.flags = IORESOURCE_MEM,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
},
[1] = {
.start = 86,
......@@ -661,6 +661,25 @@ static struct platform_device spi0_device = {
.resource = spi0_resources,
};
static struct resource spi1_resources[] = {
{
.start = 0xffd8ee70,
.end = 0xffd8eeff,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
},
{
.start = 54,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device spi1_device = {
.name = "sh_spi",
.id = 1,
.num_resources = ARRAY_SIZE(spi1_resources),
.resource = spi1_resources,
};
static struct resource usb_ehci_resources[] = {
[0] = {
.start = 0xfe4f1000,
......@@ -720,6 +739,7 @@ static struct platform_device *sh7757_devices[] __initdata = {
&dma2_device,
&dma3_device,
&spi0_device,
&spi1_device,
&usb_ehci_device,
&usb_ohci_device,
};
......
......@@ -63,7 +63,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
mp_ops->prepare_cpus(max_cpus);
#ifndef CONFIG_HOTPLUG_CPU
init_cpu_present(&cpu_possible_map);
init_cpu_present(cpu_possible_mask);
#endif
}
......
......@@ -27,7 +27,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
* Presently all SH-X3 SMP cores are multi-cores, so just keep it
* simple until we have a method for determining topology..
*/
return cpu_possible_map;
return *cpu_possible_mask;
}
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
......
......@@ -23,6 +23,7 @@
#define MAX_OCACHE_PAGES 32
#define MAX_ICACHE_PAGES 32
#ifdef CONFIG_CACHE_WRITEBACK
static void sh2a_flush_oc_line(unsigned long v, int way)
{
unsigned long addr = (v & 0x000007f0) | (way << 11);
......@@ -34,6 +35,7 @@ static void sh2a_flush_oc_line(unsigned long v, int way)
__raw_writel(data, CACHE_OC_ADDRESS_ARRAY | addr);
}
}
#endif
static void sh2a_invalidate_line(unsigned long cache_addr, unsigned long v)
{
......
......@@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk)
return -EINVAL;
}
clk->parent = clk->parent_table[val];
clk_reparent(clk, clk->parent_table[val]);
if (!clk->parent) {
pr_err("sh_clk_init_parent: unable to set parent");
return -EINVAL;
......
......@@ -1061,7 +1061,7 @@ static struct pvr2_board {
int (*init)(void);
void (*exit)(void);
char name[16];
} board_driver[] = {
} board_driver[] __refdata = {
#ifdef CONFIG_SH_DREAMCAST
{ pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" },
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册