setup_64.c 14.6 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
/*
 * 
 * Common boot and setup code.
 *
 * Copyright (C) 2001 PPC64 Team, IBM Corp
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
34
#include <linux/bootmem.h>
35
#include <linux/pci.h>
36
#include <linux/lockdep.h>
37
#include <linux/lmb.h>
38
#include <asm/io.h>
39
#include <asm/kdump.h>
40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/firmware.h>
P
Paul Mackerras 已提交
61
#include <asm/xmon.h>
D
David Gibson 已提交
62
#include <asm/udbg.h>
63
#include <asm/kexec.h>
64

S
Stephen Rothwell 已提交
65 66
#include "setup.h"

67 68 69 70 71 72 73 74 75
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

int boot_cpuid = 0;
u64 ppc64_pft_size;

76 77 78 79
/* Pick defaults since we might want to patch instructions
 * before we've read this from the device tree.
 */
struct ppc64_caches ppc64_caches = {
80 81 82 83
	.dline_size = 0x40,
	.log_dline_size = 6,
	.iline_size = 0x40,
	.log_iline_size = 6
84
};
85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
EXPORT_SYMBOL_GPL(ppc64_caches);

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

#ifdef CONFIG_SMP

static int smt_enabled_cmdline;

/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
	struct device_node *dn;
103
	const char *smt_option;
104 105 106 107 108 109 110 111

	/* Allow the command line to overrule the OF option */
	if (smt_enabled_cmdline)
		return;

	dn = of_find_node_by_path("/options");

	if (dn) {
112
		smt_option = of_get_property(dn, "ibm,smt-enabled", NULL);
113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139

                if (smt_option) {
			if (!strcmp(smt_option, "on"))
				smt_enabled_at_boot = 1;
			else if (!strcmp(smt_option, "off"))
				smt_enabled_at_boot = 0;
                }
        }
}

/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
	smt_enabled_cmdline = 1;

	if (!p)
		return 0;

	if (!strcmp(p, "on") || !strcmp(p, "1"))
		smt_enabled_at_boot = 1;
	else if (!strcmp(p, "off") || !strcmp(p, "0"))
		smt_enabled_at_boot = 0;

	return 0;
}
early_param("smt-enabled", early_smt_enabled);

P
Paul Mackerras 已提交
140 141
#else
#define check_smt_enabled()
142 143
#endif /* CONFIG_SMP */

144 145 146 147 148 149 150
/* Put the paca pointer into r13 and SPRG3 */
void __init setup_paca(int cpu)
{
	local_paca = &paca[cpu];
	mtspr(SPRN_SPRG3, local_paca);
}

151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
/*
 * Early initialization entry point. This is called by head.S
 * with MMU translation disabled. We rely on the "feature" of
 * the CPU that ignores the top 2 bits of the address in real
 * mode so we can access kernel globals normally provided we
 * only toy with things in the RMO region. From here, we do
 * some early parsing of the device-tree to setup out LMB
 * data structures, and allocate & initialize the hash table
 * and segment tables so we can start running with translation
 * enabled.
 *
 * It is this function which will call the probe() callback of
 * the various platform types and copy the matching one to the
 * global ppc_md structure. Your platform can eventually do
 * some very early initializations from the probe() routine, but
 * this is not recommended, be very careful as, for example, the
 * device-tree is not accessible via normal means at this point.
 */

void __init early_setup(unsigned long dt_ptr)
{
172 173
	/* -------- printk is _NOT_ safe to use here ! ------- */

174 175 176
	/* Fill in any unititialised pacas */
	initialise_pacas();

177
	/* Identify CPU type */
178
	identify_cpu(0, mfspr(SPRN_PVR));
179

180 181 182
	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
	setup_paca(0);

183 184 185
	/* Initialize lockdep early or else spinlocks will blow */
	lockdep_init();

186 187
	/* -------- printk is now safe to use ------- */

188 189 190
	/* Enable early debugging if any specified (see udbg.h) */
	udbg_early_init();

191
 	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
192 193

	/*
194 195 196
	 * Do early initialization using the flattened device
	 * tree, such as retrieving the physical memory map or
	 * calculating/retrieving the hash table size.
197 198 199
	 */
	early_init_devtree(__va(dt_ptr));

200
	/* Now we know the logical id of our boot cpu, setup the paca. */
201
	setup_paca(boot_cpuid);
202 203 204 205

	/* Fix up paca fields required for the boot cpu */
	get_paca()->cpu_start = 1;

206 207
	/* Probe the machine type */
	probe_machine();
208

209
	setup_kdump_trampoline();
210

211 212
	DBG("Found, Initializing memory management...\n");

213 214
	/* Initialize the hash table or TLB handling */
	early_init_mmu();
215 216 217 218

	DBG(" <- early_setup()\n");
}

219 220 221
#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
222
	/* Mark interrupts enabled in PACA */
223
	get_paca()->soft_enabled = 0;
224

225 226
	/* Initialize the hash table or TLB handling */
	early_init_mmu_secondary();
227 228 229
}

#endif /* CONFIG_SMP */
230

231
#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
232 233 234
extern unsigned long __secondary_hold_spinloop;
extern void generic_secondary_smp_init(void);

235 236
void smp_release_cpus(void)
{
237
	unsigned long *ptr;
238 239 240 241 242 243 244

	DBG(" -> smp_release_cpus()\n");

	/* All secondary cpus are spinning on a common spinloop, release them
	 * all now so they can start to spin on their individual paca
	 * spinloops. For non SMP kernels, the secondary cpus never get out
	 * of the common spinloop.
245
	 */
246

247 248
	ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
			- PHYSICAL_START);
249
	*ptr = __pa(generic_secondary_smp_init);
250 251 252 253 254 255
	mb();

	DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */

256
/*
257 258
 * Initialize some remaining members of the ppc64_caches and systemcfg
 * structures
259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277
 * (at least until we get rid of them completely). This is mostly some
 * cache informations about the CPU that will be used by cache flush
 * routines and/or provided to userland
 */
static void __init initialize_cache_info(void)
{
	struct device_node *np;
	unsigned long num_cpus = 0;

	DBG(" -> initialize_cache_info()\n");

	for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
		num_cpus += 1;

		/* We're assuming *all* of the CPUs have the same
		 * d-cache and i-cache sizes... -Peter
		 */

		if ( num_cpus == 1 ) {
278
			const u32 *sizep, *lsizep;
279 280 281 282
			u32 size, lsize;

			size = 0;
			lsize = cur_cpu_spec->dcache_bsize;
283
			sizep = of_get_property(np, "d-cache-size", NULL);
284 285
			if (sizep != NULL)
				size = *sizep;
286 287 288 289
			lsizep = of_get_property(np, "d-cache-block-size", NULL);
			/* fallback if block size missing */
			if (lsizep == NULL)
				lsizep = of_get_property(np, "d-cache-line-size", NULL);
290 291 292 293 294 295
			if (lsizep != NULL)
				lsize = *lsizep;
			if (sizep == 0 || lsizep == 0)
				DBG("Argh, can't find dcache properties ! "
				    "sizep: %p, lsizep: %p\n", sizep, lsizep);

296 297
			ppc64_caches.dsize = size;
			ppc64_caches.dline_size = lsize;
298 299 300 301 302
			ppc64_caches.log_dline_size = __ilog2(lsize);
			ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;

			size = 0;
			lsize = cur_cpu_spec->icache_bsize;
303
			sizep = of_get_property(np, "i-cache-size", NULL);
304 305
			if (sizep != NULL)
				size = *sizep;
306 307 308
			lsizep = of_get_property(np, "i-cache-block-size", NULL);
			if (lsizep == NULL)
				lsizep = of_get_property(np, "i-cache-line-size", NULL);
309 310 311 312 313 314
			if (lsizep != NULL)
				lsize = *lsizep;
			if (sizep == 0 || lsizep == 0)
				DBG("Argh, can't find icache properties ! "
				    "sizep: %p, lsizep: %p\n", sizep, lsizep);

315 316
			ppc64_caches.isize = size;
			ppc64_caches.iline_size = lsize;
317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333
			ppc64_caches.log_iline_size = __ilog2(lsize);
			ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
		}
	}

	DBG(" <- initialize_cache_info()\n");
}


/*
 * Do some initial setup of the system.  The parameters are those which 
 * were passed in from the bootloader.
 */
void __init setup_system(void)
{
	DBG(" -> setup_system()\n");

334 335
	/* Apply the CPUs-specific and firmware specific fixups to kernel
	 * text (nop out sections not relevant to this CPU or this firmware)
336
	 */
337
	do_feature_fixups(cur_cpu_spec->cpu_features,
338
			  &__start___ftr_fixup, &__stop___ftr_fixup);
339 340
	do_feature_fixups(cur_cpu_spec->mmu_features,
			  &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup);
341 342
	do_feature_fixups(powerpc_firmware_features,
			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
K
Kumar Gala 已提交
343 344
	do_lwsync_fixups(cur_cpu_spec->cpu_features,
			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
345

346 347 348 349 350 351 352
	/*
	 * Unflatten the device-tree passed by prom_init or kexec
	 */
	unflatten_device_tree();

	/*
	 * Fill the ppc64_caches & systemcfg structures with informations
353
 	 * retrieved from the device-tree.
354 355 356
	 */
	initialize_cache_info();

357 358 359 360 361
	/*
	 * Initialize irq remapping subsystem
	 */
	irq_early_init();

362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378
#ifdef CONFIG_PPC_RTAS
	/*
	 * Initialize RTAS if available
	 */
	rtas_initialize();
#endif /* CONFIG_PPC_RTAS */

	/*
	 * Check if we have an initrd provided via the device-tree
	 */
	check_for_initrd();

	/*
	 * Do some platform specific early initializations, that includes
	 * setting up the hash table pointers. It also sets up some interrupt-mapping
	 * related options that will be used by finish_device_tree()
	 */
379 380
	if (ppc_md.init_early)
		ppc_md.init_early();
381

382 383 384 385 386 387 388
 	/*
	 * We can discover serial ports now since the above did setup the
	 * hash table management for us, thus ioremap works. We do that early
	 * so that further code can be debugged
	 */
	find_legacy_serial_ports();

389 390 391 392 393
	/*
	 * Register early console
	 */
	register_early_udbg_console();

394 395 396 397
	/*
	 * Initialize xmon
	 */
	xmon_setup();
398

P
Paul Mackerras 已提交
399 400
	check_smt_enabled();
	smp_setup_cpu_maps();
401

402
#ifdef CONFIG_SMP
403 404 405 406
	/* Release secondary cpus out of their spinloops at 0x60 now that
	 * we can map physical -> logical CPU ids
	 */
	smp_release_cpus();
407
#endif
408

409
	printk("Starting Linux PPC64 %s\n", init_utsname()->version);
410 411

	printk("-----------------------------------------------------\n");
412 413
	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
414 415 416 417 418 419 420 421
	if (ppc64_caches.dline_size != 0x80)
		printk("ppc64_caches.dcache_line_size = 0x%x\n",
		       ppc64_caches.dline_size);
	if (ppc64_caches.iline_size != 0x80)
		printk("ppc64_caches.icache_line_size = 0x%x\n",
		       ppc64_caches.iline_size);
	if (htab_address)
		printk("htab_address                  = 0x%p\n", htab_address);
422
	printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
423 424 425
	if (PHYSICAL_START > 0)
		printk("physical_start                = 0x%lx\n",
		       PHYSICAL_START);
426 427 428 429 430 431 432 433 434 435 436 437 438 439
	printk("-----------------------------------------------------\n");

	DBG(" <- setup_system()\n");
}

#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
	unsigned int i;

	/*
	 * interrupt stacks must be under 256MB, we cannot afford to take
	 * SLB misses on them.
	 */
440
	for_each_possible_cpu(i) {
441 442 443 444 445 446
		softirq_ctx[i] = (struct thread_info *)
			__va(lmb_alloc_base(THREAD_SIZE,
					    THREAD_SIZE, 0x10000000));
		hardirq_ctx[i] = (struct thread_info *)
			__va(lmb_alloc_base(THREAD_SIZE,
					    THREAD_SIZE, 0x10000000));
447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470
	}
}
#else
#define irqstack_early_init()
#endif

/*
 * Stack space used when we detect a bad kernel stack pointer, and
 * early in SMP boots before relocation is enabled.
 */
static void __init emergency_stack_init(void)
{
	unsigned long limit;
	unsigned int i;

	/*
	 * Emergency stacks must be under 256MB, we cannot afford to take
	 * SLB misses on them. The ABI also requires them to be 128-byte
	 * aligned.
	 *
	 * Since we use these as temporary stacks during secondary CPU
	 * bringup, we need to get at them in real mode. This means they
	 * must also be within the RMO region.
	 */
471
	limit = min(0x10000000ULL, lmb.rmo_size);
472

473 474 475 476 477 478
	for_each_possible_cpu(i) {
		unsigned long sp;
		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
		sp += THREAD_SIZE;
		paca[i].emergency_sp = __va(sp);
	}
479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503
}

/*
 * Called into from start_kernel, after lock_kernel has been called.
 * Initializes bootmem, which is unsed to manage page allocation until
 * mem_init is called.
 */
void __init setup_arch(char **cmdline_p)
{
	ppc64_boot_msg(0x12, "Setup Arch");

	*cmdline_p = cmd_line;

	/*
	 * Set cache line size based on type of cpu as a default.
	 * Systems with OF can look in the properties on the cpu node(s)
	 * for a possibly more accurate value.
	 */
	dcache_bsize = ppc64_caches.dline_size;
	icache_bsize = ppc64_caches.iline_size;

	/* reboot on panic */
	panic_timeout = 180;

	if (ppc_md.panic)
504
		setup_panic();
505

506
	init_mm.start_code = (unsigned long)_stext;
507 508 509 510 511 512 513 514 515 516 517 518 519
	init_mm.end_code = (unsigned long) _etext;
	init_mm.end_data = (unsigned long) _edata;
	init_mm.brk = klimit;
	
	irqstack_early_init();
	emergency_stack_init();

	stabs_alloc();

	/* set up the bootmem stuff with available memory */
	do_init_bootmem();
	sparse_init();

520 521 522 523
#ifdef CONFIG_DUMMY_CONSOLE
	conswitchp = &dummy_con;
#endif

524 525
	if (ppc_md.setup_arch)
		ppc_md.setup_arch();
526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560

	paging_init();
	ppc64_boot_msg(0x15, "Setup Done");
}


/* ToDo: do something useful if ppc_md is not yet setup. */
#define PPC64_LINUX_FUNCTION 0x0f000000
#define PPC64_IPL_MESSAGE 0xc0000000
#define PPC64_TERM_MESSAGE 0xb0000000

static void ppc64_do_msg(unsigned int src, const char *msg)
{
	if (ppc_md.progress) {
		char buf[128];

		sprintf(buf, "%08X\n", src);
		ppc_md.progress(buf, 0);
		snprintf(buf, 128, "%s", msg);
		ppc_md.progress(buf, 0);
	}
}

/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg)
{
	ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
	printk("[boot]%04x %s\n", src, msg);
}

void cpu_die(void)
{
	if (ppc_md.cpu_die)
		ppc_md.cpu_die();
}
561 562 563 564 565 566 567 568 569

#ifdef CONFIG_SMP
void __init setup_per_cpu_areas(void)
{
	int i;
	unsigned long size;
	char *ptr;

	/* Copy section for each CPU (we discard the original) */
570
	size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
571 572 573 574 575
#ifdef CONFIG_MODULES
	if (size < PERCPU_ENOUGH_ROOM)
		size = PERCPU_ENOUGH_ROOM;
#endif

576
	for_each_possible_cpu(i) {
577
		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
578 579 580 581 582 583

		paca[i].data_offset = ptr - __per_cpu_start;
		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
	}
}
#endif
584 585 586 587 588 589 590


#ifdef CONFIG_PPC_INDIRECT_IO
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif /* CONFIG_PPC_INDIRECT_IO */