Reviewed-by: NPaul B Mahol <onemda@gmail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Oops.

SSE2 version 4%-35% faster than MMX depending on the width.
AVX2 version 1%-13% faster than SSE2 depending on the width.

There is no avpriv_atomic_get, instead avpriv_atomic_int_get is to be used for
integers. This fixes building mmaldec.
Signed-off-by: NJulian Scheel <julian@jusst.de>
Reviewed-by: Nwm4 <nfxjfg@googlemail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Function protoypes without arguments require a void argument in C,
instead of an empty list.

This commit introduces a parser for the current bitstream produced by
Daala. It currently bears a large similarity with Theora, another
codec produced by Xiph. While likely to change in the future, its basic
format of packet parsing should remain fairly identical with its current
structure.
Once the bitstream freezes, there are a few probable simplifications
that could be made. Also, the current version (major, minor and micro)
is stuck at zero so it's unusable as a way to warn about possible
incompatibilities. This will change once the bitstream freezes,
however until then this file is strictly targeting the current git
master of the reference encoder, libdaala.

This file was developed independently at the same time by both myself
and Vittorio Giovara, who used libav as a starting point. For fairness,
and to prevent confusion and allegations, his name has been added to the
copyright in the license header as well, and vice versa.

This commit shall introduce the first step of adding support for the
Daala next generation video codec to FFmpeg. Although still in
development, the codec is showing good progress and exchanging work
through IETF drafts. The companies behind Daala are also participating
in the Alliance for Open Media, so it's likely that whatever the result
any of these collaborations produce it's probable that elements from
Daala could be used in them, or perhaps this codec itself could be the
result.

VP8E_UPD_ENTROPY, VP8E_UPD_REFERENCE, VP8E_USE_REFERENCE were removed
from libvpx and the remaining values were never used here
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc>
Signed-off-by: NJames Zern <jzern@google.com>

Heavily based upon ff_add_bytes by Christophe Gisquet.
Reviewed-by: NJames Almer <jamrial@gmail.com>
Signed-off-by: NTimothy Gu <timothygu99@gmail.com>

Reviewed-by: NPaul B Mahol <onemda@gmail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Also replace the last two usages of avpriv_float_dsp_init with
avpriv_float_dsp_alloc.
Reviewed-by: NJames Almer <jamrial@gmail.com>
Signed-off-by: NAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

It was replaced by avpriv_ac3_parse_header2.
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc>
Signed-off-by: NAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

These headers contain functions supposed to be public.

libavutil/des.h:
 av_des_alloc
 av_des_crypt
 av_des_init
 av_des_mac
libavutil/rc4.h:
 av_rc4_alloc
 av_rc4_crypt
 av_rc4_init
libavutil/tree.h
 av_tree_destroy
 av_tree_enumerate
 av_tree_find
 av_tree_insert
 av_tree_node_alloc
 av_tree_node_size
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc>
Signed-off-by: NAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>

This reverts commit 628e6d01 and uses
a better fix.

Before:
4483 decicycles in get_pixels_8x4_sym,  131032 runs,     40 skips

After:
2569 decicycles in get_pixels_8x4_sym,  131054 runs,     18 skips

The parser only reads the dca core sample rate, which is limited to a
maximum of 48000 Hz, while X96 and HD extensions can increase the sample
rate up to 192000 Hz.

This change prevents the parser and decoder fighting over the sample rate,
potentially confusing user applications. This also fixes sample rate
display of >48000Hz files with ffmpeg/ffprobe when using libdcadec.

Fixes ticket #4397

Commit 2b3e9bbf caused problems for a
certain API user:

https://code.google.com/p/chromium/issues/detail?id=537725
https://code.google.com/p/chromium/issues/detail?id=542032

The problem seems rather arbitrary, because if there's junk, anything
can happen. In this case, the imperfect junk skipping just caused it to
read different junk, from what I can see.

We can improve the accuracy of junk detection by a lot by checking if 2
consecutive frames use the same configuration. While in theory it might
be completely fine for the 1st frame to have a different format than the
2nd frame, it's exceedingly unlikely, and I can't think of a legitimate
use-case.

This is approximately the same mpg123 does for junk skipping. The
set of compared header bits is the same as the libavcodec mp3 parser
uses for similar purposes.

Signed-off-by: NPaul B Mahol <onemda@gmail.com>

Signed-off-by: NPaul B Mahol <onemda@gmail.com>

This is how the other perl scripts in git call perl
Reviewed-by: NGanesh Ajjanagadde <gajjanag@mit.edu>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

It is done this way in huffyuvdsp as well.

That's where all yasm initiation steps are. Also removes the overlap
between the two files.

This function does not exist.

Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

treat this the same as an over-sized superframe packet to break out of
the parser loop and allow the decoder to fail.
Reviewed-by: NRonald S. Bultje <rsbultje@gmail.com>
Signed-off-by: NJames Zern <jzern@google.com>

Signed-off-by: NMatt Oliver <protogonoi@gmail.com>

Signed-off-by: NMatt Oliver <protogonoi@gmail.com>

Example:

% ./ffmpeg -h encoder=aac
  -aac_coder         <int>        E...A... Coding algorithm (from -1 to 3) (default twoloop)
     faac                         E...A... FAAC-inspired method
     anmr                         E...A... ANMR method
     twoloop                      E...A... Two loop searching method
     fast                         E...A... Constant quantizer
[...]

Signed-off-by: NKyle Swanson <k@ylo.ph>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

These functions return an error typically when the key size is an
incorrect number. AVERROR(EINVAL) is more specific than -1.
Reviewed-by: NRonald S. Bultje <rsbultje@gmail.com>
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc>
Signed-off-by: NGanesh Ajjanagadde <gajjanagadde@gmail.com>

Reviewed-by: NPaul B Mahol <onemda@gmail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NPaul B Mahol <onemda@gmail.com>

Commit 3a0a2f33 claims large performance
advantages for AV_QSORT over libc's qsort. The reason is that I suspect
that libc's qsort (at least on non LTO builds, like the typical FFmpeg config)
can't inline the comparison callback:
https://stackoverflow.com/questions/5290695/is-there-any-way-a-c-c-compiler-can-inline-a-c-callback-function.
AV_QSORT has two things going for it:
1. The guaranteed inlining of qsort itself. This yields a negligible
boost that may be ignored.
2. The more serious possibility of potentially allowing the comparison
function to be inlined - this is likely responsible for the large boosts
reported.

There is a comment explaining that this is a place that could use some
performance improvement. Thus AV_QSORT is used to achieve that.

Benchmarks deemed unnecessary due to existing claims about AV_QSORT.
Tested with FATE.
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc>
Signed-off-by: NGanesh Ajjanagadde <gajjanagadde@gmail.com>

libavutil was always built, allow its dependencies to be enabled.

Signed-off-by: NPaul B Mahol <onemda@gmail.com>

Signed-off-by: NPaul B Mahol <onemda@gmail.com>

When the encoder is fed with less frames than its delay, the picture list looks like { NULL, NULL, ..., frame, frame, frame }. When flushing the encoder (input frame == NULL), we need to ensure the picture list is shifted enough so that we do not return an empty packet, which would mean the encoder has finished, while it has not encoded any frame.

Before the patch, the command:
'./ffmpeg_g -loglevel debug -f lavfi -i "testsrc=d=0.01" -bf 2 -vcodec mpeg2video out.mxf' prints:

Output stream #0:0 (video): 1 frames encoded; 0 packets muxed (0 bytes);

After:

Output stream #0:0 (video): 1 frames encoded; 1 packets muxed (8058 bytes);

Relates to ticket #4817.
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: NPaul B Mahol <onemda@gmail.com>