- 22 10月, 2012 12 次提交
-
-
由 Padmanabh Ratnakar 提交于
Return default values for fields for which VFs dont have privilege to get the required information from FW. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
VF does not have privileges to execute many commands. When VFs try to execute those commands there are unnecessary error messages. Fix this by executing only those commands for which VF has privilege. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Allow adding VLANs for Lancer VF. VLAN ID 0 should not be added to list of VLANs sent to FW. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
After FW error, driver should wait for NO_RESOURCE error to disappear before proceeding with recovery. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
For changing MAC of VF from PF, delete MAC operation needs to be done before assigning new MAC. Also in ndo_set_mac_address operation avoid delete MAC if it has been already deleted by PF. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Use Lancer specific command to set QoS for VF. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Driver assumes FW resource counts and capabilities while creating queues and using functionality like RSS. This causes driver load to fail in FW configs where resources and capabilities are reduced. Fix this by querying FW configuration during probe and using resources and capabilities accordingly. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
This patch removes double assignment of err to -EINVAL in dev_change_net_namespace(). Signed-off-by: NRami Rosen <ramirose@gmail.com> Acked-by: NSerge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The SO_BINDTODEVICE option is the only SOL_SOCKET one that can be set, but cannot be get via sockopt API. The only way we can find the device id a socket is bound to is via sock-diag interface. But the diag works only on hashed sockets, while the opt in question can be set for yet unhashed one. That said, in order to know what device a socket is bound to (we do want to know this in checkpoint-restore project) I propose to make this option getsockopt-able and report the respective device index. Another solution to the problem might be to teach the sock-diag reporting info on unhashed sockets. Should I go this way instead? Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The struct sock *other one seem to be unused. Grep and make do not object. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use the standard test for a non-zero ipv6 address. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
Checked with Windows networking team, there is only one RNDIS message in each netvsc packet. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2012 16 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== This series contains updates to ixgbe and igb. Alexander Duyck (13): ixgbe: Initialize q_vector cpu and affinity masks correctly ixgbe: Enable jumbo frames support w/ SR-IOV ixgbe: Move message handling routines into their own functions ixgbe: Add mailbox API version negotiation support to ixgbe PF igb: Split Rx timestamping into two separate functions igb: Do not use header split, instead receive all frames into a single buffer igb: Combine post-processing of skb into a single function igb: Map entire page and sync half instead of mapping and unmapping half pages igb: Move rx_buffer related code in Rx cleanup path into separate function igb: Lock buffer size at 2K even on systems with larger pages igb: Combine q_vector and ring allocation into a single function igb: Move the calls to set the Tx and Rx queues into igb_open igb: Split igb_update_dca into separate Tx and Rx functions Tushar Dave (1): igb: Correcting and improving small packet check and padding ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Joachim Eastwood says; ==================== This patch series prepares the old at91_ether driver for code sharing with the macb driver. The hardware is similar except for DMA TX/RX, so its not quite clear if it is practical to support both in one driver. But stuff like MDIO and statistics should be possible to share. Patch 1 adds some register defines and bits that is only found on RM9200. Patch 2-4 uses the register defines and access functions from the macb header. These can be squashed if it cause too much churn. Patch 5 merges the private at91_ether struct with the private macb struct. This makes it easier to later share code with the macb. The private macb struct becomes quite large, but most at91_ether specific members are removed in later patches. Patch 8 make macb compile when we select at91_ether. Is this approach okey? Patch 9 makes use of MDIO code from macb. This rips out the private phy handling code in at91_ether. One thing that is lost is the interrupt support for phy. But this should easy to add to macb which will then benefit both drivers. Patch 10 makes use of the macb_set_rx_mode from macb. Patch 11-12 makes at91_ether share the rx dma struct members from macb. Patch also moves the rx buffer allocation into netdev open and dealloc into netdev close. Last patch remove the now unused rm9200 emac header from include/mach. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joachim Eastwood 提交于
This file is unused after at91_ether was converted to use macb.h Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
This patch does two things: * Use macb struct members and remove at91_ether ones * Alloc DMA buffers on netdev start and dealloc on stop Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
This rips out the at91_ether phy handling and ethtool stuff and replace it with equivalent stuff from macb. The only thing lost is the phy irq support from at91_ether, but this can be added to macb and then benefit all users. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Comile macb as well as at91_ether to access exported functions. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Export some symbols to start sharing code between macb and at91_ether drivers. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Remove old at91_priv member and use pclk member from macb. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
This will make it easier to share code between the drivers and eventually merge them into one driver. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Use macb read/write funtions and remove the old at91_ether ones. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Use register and bits definitions from the macb header. This makes it possible to have one header file for this hardware. Process was scripted and the resulting object file has the same checksum. Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
-
- 19 10月, 2012 12 次提交
-
-
由 Alexander Duyck 提交于
This change makes it so that igb_update_dca is broken into two halves, one for Rx and one for Tx. The advantage to this is primarily readability. In addition I am enabling relaxed ordering for reads from hardware since this is supported on all of the igb parts. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change helps to address locking issues seen with netif_set_real_num_tx_queues and netif_set_real_num_rx_queues when used in the igb_set_interrupt_capability function. To resolve these locking issues I have moved the two function calls into __igb_open so that they can be called while the RTNL lock is held. An added advantage to this is that the number of queues is not updated until the last possible moment so if there are any issues in allocating MSI-X interrupts or resources for the rings we have time to change the values prior to updating the netdev. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change combines the the allocation of q_vectors and rings into a single function. The advantage of this is that we are guaranteed we will avoid overlap in the L1 cache sets. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change locks us in at 2K buffers even on a system that supports larger frames. The reason for this change is to make better use of pages and to reduce the overall truesize of frames generated by igb. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
In order to try and isolate things a bit further I am moving the code related to retrieving data from the rx_buffer_info structure into a separate function. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we map the entire page and just sync half of it for the device at a time. The advantage to this approach is that we can avoid the locking on map/unmap seen in many IOMMU implementations. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change is meant to just clean-up a number of function calls that were made at the end of the Rx clean-up path by combining them into a single function call. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we no longer use header split. The idea is to reduce partial cache line writes by hardware when handling frames larger then header size. We can compensate for the extra overhead of having to memcpy the header buffer by avoiding the cache misses seen by leaving an full skb allocated and sitting on the ring. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
In order to support page based receive we will need to split up the two different types of timestamping into two separate functions. The first one will handle legacy timestamps with the value in the register, and the new one will handle timestamps in the Rx buffer itself. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NMatthew Vick <matthew.vick@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Tushar Dave 提交于
Current implementation mess up the tail pointer. This patch sets skb->tail correctly. Also, the small packet check and padding is optimized by using unlikely and calling skb_pad directly. Signed-off-by: NTushar Dave <tushar.n.dave@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change allows us to add a mailbox versioning API. This will allow us to determine the features supported by the VFs from the PF. For example we will be implementing a version 1.1 API for the VF that will indicate that it can support us enabling Jumbo frames as the VF will support buffer chaining. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRobert Garrett <RobertX.Garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Instead of trying to maintain one large monolithic function that handles most of the different messages from the VF it makes sense to break the message handling function up so that we can just go through one switch statement and call the correct routine for a given message. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-