net/at91_ether: use macb defs for rx dma buffers

Signed-off-by: NJoachim Eastwood <manabian@gmail.com>

drivers/net/ethernet/cadence/at91_ether.c

@@ -741,7 +741,7 @@ static void at91ether_start(struct net_device *dev)
 	}
 
 	/* Set the Wrap bit on the last descriptor */
-	dlist->descriptors[i-1].addr |= EMAC_DESC_WRAP;
+	dlist->descriptors[i-1].addr |= MACB_BIT(RX_WRAP);
 
 	/* Reset buffer index */
 	lp->rxBuffIndex = 0;
@@ -901,7 +901,7 @@ static void at91ether_rx(struct net_device *dev)
 	unsigned int pktlen;
 
 	dlist = lp->dlist;
-	while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
+	while (dlist->descriptors[lp->rxBuffIndex].addr & MACB_BIT(RX_USED)) {
 		p_recv = dlist->recv_buf[lp->rxBuffIndex];
 		pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff;	/* Length of frame including FCS */
 		skb = netdev_alloc_skb(dev, pktlen + 2);
@@ -918,10 +918,10 @@ static void at91ether_rx(struct net_device *dev)
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 		}
 
-		if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
+		if (dlist->descriptors[lp->rxBuffIndex].size & MACB_BIT(RX_MHASH_MATCH))
 			dev->stats.multicast++;
 
-		dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE;	/* reset ownership bit */
+		dlist->descriptors[lp->rxBuffIndex].addr &= ~MACB_BIT(RX_USED);	/* reset ownership bit */
 		if (lp->rxBuffIndex == MAX_RX_DESCR-1)				/* wrap after last buffer */
 			lp->rxBuffIndex = 0;
 		else

drivers/net/ethernet/cadence/at91_ether.h

@@ -63,13 +63,6 @@
 #define MAX_RBUFF_SZ	0x600		/* 1518 rounded up */
 #define MAX_RX_DESCR	9		/* max number of receive buffers */
 
-#define EMAC_DESC_DONE	0x00000001	/* bit for if DMA is done */
-#define EMAC_DESC_WRAP	0x00000002	/* bit for wrap */
-
-#define EMAC_BROADCAST	0x80000000	/* broadcast address */
-#define EMAC_MULTICAST	0x40000000	/* multicast address */
-#define EMAC_UNICAST	0x20000000	/* unicast address */
-
 struct rbf_t
 {
 	unsigned int addr;