mnt_drop_write() must be called only if mnt_want_write() succeeded,
otherwise the mnt_writers counter will diverge.

mnt_writers counters are used to check if remounting FS as read-only is
OK, so after an extra mnt_drop_write() call, it would be impossible to
remount mqueue FS as read-only.  Besides, on umount a warning would be
printed like this one:

  =====================================
  [ BUG: bad unlock balance detected! ]
  3.9.0-rc3 #5 Not tainted
  -------------------------------------
  a.out/12486 is trying to release lock (sb_writers) at:
  mnt_drop_write+0x1f/0x30
  but there are no more locks to release!
Signed-off-by: NVladimir Davydov <vdavydov@parallels.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch allow the unprivileged user to mount mqueuefs in
user ns.

If two userns share the same ipcns,the files in mqueue fs
should be seen in both these two userns.

If the userns has its own ipcns,it has its own mqueue fs too.
ipcns has already done this job well.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Keep a pointer to the audit_names "slot" in struct filename.

Have all of the audit_inode callers pass a struct filename ponter to
audit_inode instead of a string pointer. If the aname field is already
populated, then we can skip walking the list altogether and just use it
directly.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

getname() is intended to copy pathname strings from userspace into a
kernel buffer. The result is just a string in kernel space. It would
however be quite helpful to be able to attach some ancillary info to
the string.

For instance, we could attach some audit-related info to reduce the
amount of audit-related processing needed. When auditing is enabled,
we could also call getname() on the string more than once and not
need to recopy it from userspace.

This patchset converts the getname()/putname() interfaces to return
a struct instead of a string. For now, the struct just tracks the
string in kernel space and the original userland pointer for it.

Later, we'll add other information to the struct as it becomes
convenient.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently, this gets set mostly by happenstance when we call into
audit_inode_child. While that might be a little more efficient, it seems
wrong. If the syscall ends up failing before audit_inode_child ever gets
called, then you'll have an audit_names record that shows the full path
but has the parent inode info attached.

Fix this by passing in a parent flag when we call audit_inode that gets
set to the value of LOOKUP_PARENT. We can then fix up the pathname for
the audit entry correctly from the get-go.

While we're at it, clean up the no-op macro for audit_inode in the
!CONFIG_AUDITSYSCALL case.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit d6629859 ("ipc/mqueue: improve performance of send/recv") and
ce2d52cc ("ipc/mqueue: add rbtree node caching support") introduced an
rbtree of message priorities, and usage of rb_init_node() to initialize
the corresponding nodes.  As it turns out, rb_init_node() is unnecessary
here, as the nodes are fully initialized on insertion by rb_link_node()
and the code doesn't access nodes that aren't inserted on the rbtree.

Removing the rb_init_node() calls as I removed that function during
rbtree API cleanups (the only other use of it was in a place that
similarly didn't require it).
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

the way it abuses ->d_fsdata still needs to be killed, but that's
a separate story.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

all we want is a boolean flag, same as the method gets now
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

boolean "does it have to be exclusive?" flag is passed instead;
Local filesystem should just ignore it - the object is guaranteed
not to be there yet.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When I wrote the first patch that added the rbtree support for message
queue insertion, it sped up the case where the queue was very full
drastically from the original code.  It, however, slowed down the case
where the queue was empty (not drastically though).

This patch caches the last freed rbtree node struct so we can quickly
reuse it when we get a new message.  This is the common path for any queue
that very frequently goes from 0 to 1 then back to 0 messages in queue.

Andrew Morton didn't like that we were doing a GFP_ATOMIC allocation in
msg_insert, so this patch attempts to speculatively allocate a new node
struct outside of the spin lock when we know we need it, but will still
fall back to a GFP_ATOMIC allocation if it has to.

Once I added the caching, the necessary various ret = ; spin_unlock
gyrations in mq_timedsend were getting pretty ugly, so this also slightly
refactors that function to streamline the flow of the code and the
function exit.

Finally, while working on getting performance back I made sure that all of
the node structs were always fully initialized when they were first used,
rendering the use of kzalloc unnecessary and a waste of CPU cycles.

The net result of all of this is:

1) We will avoid a GFP_ATOMIC allocation when possible, but fall back
   on it when necessary.

2) We will speculatively allocate a node struct using GFP_KERNEL if our
   cache is empty (and save the struct to our cache if it's still empty
   after we have obtained the spin lock).

3) The performance of the common queue empty case has significantly
   improved and is now much more in line with the older performance for
   this case.

The performance changes are:

            Old mqueue      new mqueue      new mqueue + caching
queue empty
send/recv   305/288ns       349/318ns       310/322ns

I don't think we'll ever be able to get the recv performance back, but
that's because the old recv performance was a direct result and
consequence of the old methods abysmal send performance.  The recv path
simply must do more so that the send path does not incur such a penalty
under higher queue depths.

As it turns out, the new caching code also sped up the various queue full
cases relative to my last patch.  That could be because of the difference
between the syscall path in 3.3.4-rc5 and 3.3.4-rc6, or because of the
change in code flow in the mq_timedsend routine.  Regardless, I'll take
it.  It wasn't huge, and I *would* say it was within the margin for error,
but after many repeated runs what I'm seeing is that the old numbers trend
slightly higher (about 10 to 20ns depending on which test is the one
running).

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We already check the mq attr struct if it's passed in, but now that the
admin can set system wide defaults separate from maximums, it's actually
possible to set the defaults to something that would overflow.  So, if
there is no attr struct passed in to the open call, check the default
values.

While we are at it, simplify mq_attr_ok() by making it return 0 or an
error condition, so that way if we add more tests to it later, we have the
option of what error should be returned instead of the calling location
having to pick a possibly inaccurate error code.

[akpm@linux-foundation.org: s/ENOMEM/EOVERFLOW/]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While working on the other parts of the mqueue stuff, I noticed that the
calculation for overflow in mq_attr_ok didn't actually match reality (this
is especially true since my last patch which changed how we account memory
slightly).

In particular, we used to test for overflow using:
  msgs * msgsize + msgs * sizeof(struct msg_msg *)

That was never really correct because each message we allocate via
load_msg() is actually a struct msg_msg followed by the data for the
message (and if struct msg_msg + data exceeds PAGE_SIZE we end up
allocating struct msg_msgseg structs too, but accounting for them would
get really tedious, so let's ignore those...they're only a pointer in size
anyway).  This patch updates the calculation to be more accurate in
regards to maximum possible memory consumption by the mqueue.

[akpm@linux-foundation.org: add a local to simplify overflow-checking expression]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The existing implementation of the POSIX message queue send and recv
functions is, well, abysmal.  Even worse than abysmal.  I submitted a
patch to increase the maximum POSIX message queue limit to 65536 due to
customer needs, however, upon looking over the send/recv implementation, I
realized that my customer needs help with that too even if they don't know
it.  The basic problem is that, given the fairly typical use case scenario
for a large queue of queueing lots of messages all at the same priority (I
verified with my customer that this is indeed what their app does), the
msg_insert routine is basically a frikkin' bubble sort.  I mean, whoa,
that's *so* middle school.

OK, OK, to not slam the original author too much, I'm sure they didn't
envision a queue depth of 50,000+ messages.  No one would think that
moving elements in an array, one at a time, and dereferencing each pointer
in that array to check priority of the message being pointed too, again
one at a time, for 50,000+ times would be good.  So let's assume that, as
is typical, the users have found a way to break our code simply by using
it in a way we didn't envision.  Fair enough.

"So, just how broken is it?", you ask.  I wondered the same thing, so I
wrote an app to let me know.  It's my next patch.  It gave me some
interesting results.  Here's what it tested:

Interference with other apps - In continuous mode, the app just sits there
and hits a message queue forever, while you go do something productive on
another terminal using other CPUs.  You then measure how long it takes you
to do that something productive.  Then you restart the app in fake
continuous mode, and it sits in a tight loop on a CPU while you repeat
your tests.  The whole point of this is to keep one CPU tied up (so it
can't be used in your other work) but in one case tied up hitting the
mqueue code so we can see the effect of walking that 65,528 element array
one pointer at a time on the global CPU cache.  If it's bad, then it will
slow down your app on the other CPUs just by polluting cache mercilessly.
In the fake case, it will be in a tight loop, but not polluting cache.
Testing the mqueue subsystem directly - Here we just run a number of tests
to see how the mqueue subsystem performs under different conditions.  A
couple conditions are known to be worst case for the old system, and some
routines, so this tests all of them.

So, on to the results already:

Subsystem/Test                  Old                         New

Time to compile linux
kernel (make -j12 on a
6 core CPU)
  Running mqueue test     user 49m10.744s             user 45m26.294s
			   sys  5m51.924s              sys  4m59.894s
			 total 55m02.668s            total 50m26.188s

  Running fake test       user 45m32.686s             user 45m18.552s
                           sys  5m12.465s              sys  4m56.468s
                         total 50m45.151s            total 50m15.020s

  % slowdown from mqueue
    cache thrashing            ~8%                         ~.5%

Avg time to send/recv (in nanoseconds per message)
  when queue empty            305/288                    349/318
  when queue full (65528 messages)
    constant priority      526589/823                    362/314
    increasing priority    403105/916                    495/445
    decreasing priority     73420/594                    482/409
    random priority        280147/920                    546/436

Time to fill/drain queue (65528 messages, in seconds)
  constant priority         17.37/.12                    .13/.12
  increasing priority        4.14/.14                    .21/.18
  decreasing priority       12.93/.13                    .21/.18
  random priority            8.88/.16                    .22/.17

So, I think the results speak for themselves.  It's possible this
implementation could be improved by cacheing at least one priority level
in the node tree (that would bring the queue empty performance more in
line with the old implementation), but this works and is *so* much better
than what we had, especially for the common case of a single priority in
use, that further refinements can be in follow on patches.

[akpm@linux-foundation.org: fix typo in comment, remove stray semicolon]
[levinsasha928@gmail.com: use correct gfp flags in msg_insert]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b231cca4 ("message queues: increase range limits") changed
mqueue default value when attr parameter is specified NULL from hard
coded value to fs.mqueue.{msg,msgsize}_max sysctl value.

This made large side effect.  When user need to use two mqueue
applications 1) using !NULL attr parameter and it require big message
size and 2) using NULL attr parameter and only need small size message,
app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large
memory size even though it doesn't need.

Doug Ledford propsed to switch back it to static hard coded value.
However it also has a compatibility problem.  Some applications might
started depend on the default value is tunable.

The solution is to separate default value from maximum value.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Acked-by: NJoe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Acked-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

KMALLOC_MAX_SIZE is not a good threshold.  It is extremely high and
problematic.  Unfortunately, some silly drivers depend on this and we
can't change it.  But any new code needn't use such extreme ugly high
order allocations.  It brings us awful fragmentation issues and system
slowdown.
Signed-off-by: NKOSAKI Motohiro <mkosaki@jp.fujitsu.com>
Acked-by: NDoug Ledford <dledford@redhat.com>
Acked-by: NJoe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b231cca4 ("message queues: increase range limits") changed the
maximum size of a message in a message queue from INT_MAX to 8192*128.
Unfortunately, we had customers that relied on a size much larger than
8192*128 on their production systems.  After reviewing POSIX, we found
that it is silent on the maximum message size.  We did find a couple other
areas in which it was not silent.  Fix up the mqueue maximums so that the
customer's system can continue to work, and document both the POSIX and
real world requirements in ipc_namespace.h so that we don't have this
issue crop back up.

Also, commit 9cf18e1d ("ipc: HARD_MSGMAX should be higher not lower
on 64bit") fiddled with HARD_MSGMAX without realizing that the number was
intentionally in place to limit the msg queue depth to one that was small
enough to kmalloc an array of pointers (hence why we divided 128k by
sizeof(long)).  If we wish to meet POSIX requirements, we have no choice
but to change our allocation to a vmalloc instead (at least for the large
queue size case).  With that, it's possible to increase our allowed
maximum to the POSIX requirements (or more if we choose).

[sfr@canb.auug.org.au: using vmalloc requires including vmalloc.h]
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In two places we don't enforce the hard limits for CAP_SYS_RESOURCE apps.
In preparation for making more reasonable hard limits, start enforcing
them even on CAP_SYS_RESOURCE.
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit b231cca4 ("message queues: increase range limits") changed
how we create a queue that does not include an attr struct passed to
open so that it creates the queue with whatever the maximum values are.
However, if the admin has set the maximums to allow flexibility in
creating a queue (aka, both a large size and large queue are allowed,
but combined they create a queue too large for the RLIMIT_MSGQUEUE of
the user), then attempts to create a queue without an attr struct will
fail.  Switch back to using acceptable defaults regardless of what the
maximums are.

Note: so far, we only know of a few applications that rely on this
behavior (specifically, set the maximums in /proc, then run the
application which calls mq_open() without passing in an attr struct, and
the application expects the newly created message queue to have the
maximum sizes that were set in /proc used on the mq_open() call, and all
of those applications that we know of are actually part of regression
test suites that were coded to do something like this:

for size in 4096 65536 $((1024 * 1024)) $((16 * 1024 * 1024)); do
	echo $size > /proc/sys/fs/mqueue/msgsize_max
	mq_open || echo "Error opening mq with size $size"
done

These test suites that depend on any behavior like this are broken.  The
concept that programs should rely upon the system wide maximum in order
to get their desired results instead of simply using a attr struct to
specify what they want is fundamentally unfriendly programming practice
for any multi-tasking OS.

Fixing this will break those few apps that we know of (and those app
authors recognize the brokenness of their code and the need to fix it).
However, the following patch "mqueue: separate mqueue default value"
allows a workaround in the form of new knobs for the default msg queue
creation parameters for any software out there that we don't already
know about that might rely on this behavior at the moment.
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>

These function are no longer needed replace them with their more useful equivalents.
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Stop relying on user->user_ns which is going away and instead capture
the user_namespace of the process we are supposed to notify.
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Because the current task is being used to get the limit, we can simply
use rlimit() instead of task_rlimit().
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's
user namespace. (new, thanks Oleg)

__send_signal: convert current's uid to the recipient's user namespace
for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks
again :)

do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's
user namespace

ptrace_signal maps parent's uid into current's user namespace before
including in signal to current.  IIUC Oleg has argued that this shouldn't
matter as the debugger will play with it, but it seems like not converting
the value currently being set is misleading.

Changelog:
Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to
	simplify callers and help make clear what we are translating
        (which uid into which namespace).  Passing the target task would
	make callers even easier to read, but we pass in user_ns because
	current_user_ns() != task_cred_xxx(current, user_ns).
Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock
	in ptrace_signal().
Sep 23: In send_signal(), detect when (user) signal is coming from an
	ancestor or unrelated user namespace.  Pass that on to __send_signal,
	which sets si_uid to 0 or overflowuid if needed.
Oct 12: Base on Oleg's fixup_uid() patch.  On top of that, handle all
	SI_FROMKERNEL cases at callers, because we can't assume sender is
	current in those cases.
Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid
Nov 10: (akpm) make the !CONFIG_USER_NS case clearer
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Serge Hallyn <serge.hallyn@canonical.com>
Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2)

Eric Biederman pointed out that passing info is a bug and could lead to a
NULL pointer deref to boot.

A collection of signal, securebits, filecaps, cap_bounds, and a few other
ltp tests passed with this kernel.

Changelog:
    Nov 18: previous patch missed a leading '&'
Signed-off-by: NSerge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Dan Carpenter <dan.carpenter@oracle.com>
Subject: ipc/mqueue: lock() => unlock() typo

There was a double lock typo introduced in b085f4bd6b21 "user namespace:
make signal.c respect user namespaces"
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fix the wrong use of schedule_hrtimeout_range_clock() in wq_sleep(),
although it is harmless for the syscall mq_timed* now.  It was introduced
by 9ca7d8e6 ("mqueue: Convert message queue timeout to use hrtimers").
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We return ENOMEM from mqueue_get_inode even when we have enough memory.
Namely in case the system rlimit of mqueue was reached.  This error
propagates to mq_queue and user sees the error unexpectedly.  So fix
this up to properly return EMFILE as described in the manpage:

	EMFILE The process already has the maximum number of files and
	       message queues open.

instead of:

	ENOMEM Insufficient memory.

With the previous patch we just switch to ERR_PTR/PTR_ERR/IS_ERR error
handling here.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If new_inode fails to allocate an inode we need only to return with
NULL.  But now we test the opposite and have all the work in a nested
block.  So do the opposite to save one indentation level (and remove
unnecessary line breaks).

This is only a preparation/cleanup for the next patch where we fix up
return values from mqueue_get_inode.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

RCU free the struct inode. This will allow:

- Subsequent store-free path walking patch. The inode must be consulted for
  permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
  to take i_lock no longer need to take sb_inode_list_lock to walk the list in
  the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
  page lock to follow page->mapping.

The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.

In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.

The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Clones an existing reference to inode; caller must already hold one.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>