- 23 3月, 2013 1 次提交
-
-
由 Vladimir Davydov 提交于
mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 3月, 2013 2 次提交
-
-
由 Peter Hurley 提交于
When MSG_COPY is set, a duplicate message must be allocated for the copy before locking the queue. However, the copy could not be larger than was sent which is limited to msg_ctlmax. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Acked-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Hurley 提交于
If the src msg is > 4k, then dest->next points to the next allocated segment; resetting it just prior to dereferencing is bad. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Acked-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 2月, 2013 1 次提交
-
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. The new interface doesn't directly translate to the way idr_pre_get() was used around ipc_addid() as preloading disables preemption. From my cursory reading, it seems like we should be able to do all allocation from ipc_addid(), so I moved it there. Can you please check whether this would be okay? If this is wrong and ipc_addid() should be allowed to be called from non-sleepable context, I'd suggest allocating id itself in the outer functions and later install the pointer using idr_replace(). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 2月, 2013 2 次提交
-
-
由 Michel Lespinasse 提交于
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE multiple, however there was no equivalent code in mm_populate(), which caused issues. This could be fixed by introduced the same rounding in mm_populate(), however I think it's preferable to make do_mmap_pgoff() return populate as a size rather than as a boolean, so we don't have to duplicate the size rounding logic in mm_populate(). Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michel Lespinasse 提交于
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or with MCL_FUTURE in effect), we want to populate the pages within the newly created vmas. This may take a while as we may have to read pages from disk, so ideally we want to do this outside of the write-locked mmap_sem region. This change introduces mm_populate(), which is used to defer populating such mappings until after the mmap_sem write lock has been released. This is implemented as a generalization of the former do_mlock_pages(), which accomplished the same task but was using during mlock() / mlockall(). Signed-off-by: NMichel Lespinasse <walken@google.com> Reported-by: NAndy Lutomirski <luto@amacapital.net> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NAndy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2013 2 次提交
-
-
由 Anatol Pomozov 提交于
Allocating a file structure in function get_empty_filp() might fail because of several reasons: - not enough memory for file structures - operation is not allowed - user is over its limit Currently the function returns NULL in all cases and we loose the exact reason of the error. All callers of get_empty_filp() assume that the function can fail with ENFILE only. Return error through pointer. Change all callers to preserve this error code. [AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit (things remaining here deal with alloc_file()), removed pipe(2) behaviour change] Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 1月, 2013 1 次提交
-
-
由 Gao feng 提交于
This patch allow the unprivileged user to mount mqueuefs in user ns. If two userns share the same ipcns,the files in mqueue fs should be seen in both these two userns. If the userns has its own ipcns,it has its own mqueue fs too. ipcns has already done this job well. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 05 1月, 2013 9 次提交
-
-
由 Stanislav Kinsbursky 提交于
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
Remove the redundant and confusing fill_copy(). Also add copy_msg() check for error. In this case exit from the function have to be done instead of break, because further code interprets any error as EAGAIN. Also define copy_msg() for the case when CONFIG_CHECKPOINT_RESTORE is disabled. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
This code works if CONFIG_CHECKPOINT_RESTORE is disabled. [akpm@linux-foundation.org: remove __maybe_unused] Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
Passing and checking of msgflg to free_copy() is redundant. This patch sets copy to NULL on declaration instead and checks for non-NULL in free_copy(). Note: in case of copy allocation failure, error is returned immediately. So no need to check for IS_ERR() in free_copy(). Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
This test can be used to check wheither kernel supports IPC message queue copy and restore features (required by CRIU project). Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
This patch is required for checkpoint/restore in userspace. c/r requires some way to get all pending IPC messages without deleting them from the queue (checkpoint can fail and in this case tasks will be resumed, so queue have to be valid). To achive this, new operation flag MSG_COPY for sys_msgrcv() system call was introduced. If this flag was specified, then mtype is interpreted as number of the message to copy. If MSG_COPY is set, then kernel will allocate dummy message with passed size, and then use new copy_msg() helper function to copy desired message (instead of unlinking it from the queue). Notes: 1) Return -ENOSYS if MSG_COPY is specified, but CONFIG_CHECKPOINT_RESTORE is not set. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
Move all message related manipulation into one function msg_fill(). Actually, two functions because of the compat one. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
Add 3 new variables and sysctls to tune them (by one "next_id" variable for messages, semaphores and shared memory respectively). This variable can be used to set desired id for next allocated IPC object. By default it's equal to -1 and old behaviour is preserved. If this variable is non-negative, then desired idr will be extracted from it and used as a start value to search for free IDR slot. Notes: 1) this patch doesn't guarantee that the new object will have desired id. So it's up to user space how to handle new object with wrong id. 2) After a sucessful id allocation attempt, "next_id" will be set back to -1 (if it was non-negative). [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stanislav Kinsbursky 提交于
This is a cleanup patch. The assignment is redundant. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 12月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
Andy Lutomirski <luto@amacapital.net> found a nasty little bug in the permissions of setns. With unprivileged user namespaces it became possible to create new namespaces without privilege. However the setns calls were relaxed to only require CAP_SYS_ADMIN in the user nameapce of the targed namespace. Which made the following nasty sequence possible. pid = clone(CLONE_NEWUSER | CLONE_NEWNS); if (pid == 0) { /* child */ system("mount --bind /home/me/passwd /etc/passwd"); } else if (pid != 0) { /* parent */ char path[PATH_MAX]; snprintf(path, sizeof(path), "/proc/%u/ns/mnt"); fd = open(path, O_RDONLY); setns(fd, 0); system("su -"); } Prevent this possibility by requiring CAP_SYS_ADMIN in the current user namespace when joing all but the user namespace. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 12 12月, 2012 1 次提交
-
-
由 Andi Kleen 提交于
There was some desire in large applications using MAP_HUGETLB or SHM_HUGETLB to use 1GB huge pages on some mappings, and stay with 2MB on others. This is useful together with NUMA policy: use 2MB interleaving on some mappings, but 1GB on local mappings. This patch extends the IPC/SHM syscall interfaces slightly to allow specifying the page size. It borrows some upper bits in the existing flag arguments and allows encoding the log of the desired page size in addition to the *_HUGETLB flag. When 0 is specified the default size is used, this makes the change fully compatible. Extending the internal hugetlb code to handle this is straight forward. Instead of a single mount it just keeps an array of them and selects the right mount based on the specified page size. When no page size is specified it uses the mount of the default page size. The change is not visible in /proc/mounts because internal mounts don't appear there. It also has very little overhead: the additional mounts just consume a super block, but not more memory when not used. I also exported the new flags to the user headers (they were previously under __KERNEL__). Right now only symbols for x86 and some other architecture for 1GB and 2MB are defined. The interface should already work for all other architectures though. Only architectures that define multiple hugetlb sizes actually need it (that is currently x86, tile, powerpc). However tile and powerpc have user configurable hugetlb sizes, so it's not easy to add defines. A program on those architectures would need to query sysfs and use the appropiate log2. [akpm@linux-foundation.org: cleanups] [rientjes@google.com: fix build] [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hillf Danton <dhillf@gmail.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 11月, 2012 3 次提交
-
-
由 Eric W. Biederman 提交于
Assign a unique proc inode to each namespace, and use that inode number to ensure we only allocate at most one proc inode for every namespace in proc. A single proc inode per namespace allows userspace to test to see if two processes are in the same namespace. This has been a long requested feature and only blocked because a naive implementation would put the id in a global space and would ultimately require having a namespace for the names of namespaces, making migration and certain virtualization tricks impossible. We still don't have per superblock inode numbers for proc, which appears necessary for application unaware checkpoint/restart and migrations (if the application is using namespace file descriptors) but that is now allowd by the design if it becomes important. I have preallocated the ipc and uts initial proc inode numbers so their structures can be statically initialized. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
Modify create_new_namespaces to explicitly take a user namespace parameter, instead of implicitly through the task_struct. This allows an implementation of unshare(CLONE_NEWUSER) where the new user namespace is not stored onto the current task_struct until after all of the namespaces are created. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
由 Eric W. Biederman 提交于
- Push the permission check from the core setns syscall into the setns install methods where the user namespace of the target namespace can be determined, and used in a ns_capable call. Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 13 10月, 2012 2 次提交
-
-
由 Jeff Layton 提交于
Keep a pointer to the audit_names "slot" in struct filename. Have all of the audit_inode callers pass a struct filename ponter to audit_inode instead of a string pointer. If the aname field is already populated, then we can skip walking the list altogether and just use it directly. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Layton 提交于
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 10月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
Currently, this gets set mostly by happenstance when we call into audit_inode_child. While that might be a little more efficient, it seems wrong. If the syscall ends up failing before audit_inode_child ever gets called, then you'll have an audit_names record that shows the full path but has the parent inode info attached. Fix this by passing in a parent flag when we call audit_inode that gets set to the value of LOOKUP_PARENT. We can then fix up the pathname for the audit entry correctly from the get-go. While we're at it, clean up the no-op macro for audit_inode in the !CONFIG_AUDITSYSCALL case. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 09 10月, 2012 1 次提交
-
-
由 Michel Lespinasse 提交于
Commit d6629859 ("ipc/mqueue: improve performance of send/recv") and ce2d52cc ("ipc/mqueue: add rbtree node caching support") introduced an rbtree of message priorities, and usage of rb_init_node() to initialize the corresponding nodes. As it turns out, rb_init_node() is unnecessary here, as the nodes are fully initialized on insertion by rb_link_node() and the code doesn't access nodes that aren't inserted on the rbtree. Removing the rb_init_node() calls as I removed that function during rbtree API cleanups (the only other use of it was in a place that similarly didn't require it). Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 9月, 2012 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 9月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
- Store the ipc owner and creator with a kuid - Store the ipc group and the crators group with a kgid. - Add error handling to ipc_update_perms, allowing it to fail if the uids and gids can not be converted to kuids or kgids. - Modify the proc files to display the ipc creator and owner in the user namespace of the opener of the proc file. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 19 8月, 2012 1 次提交
-
-
由 Al Viro 提交于
the way it abuses ->d_fsdata still needs to be killed, but that's a separate story. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 7月, 2012 4 次提交
-
-
由 Will Deacon 提交于
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
The msgsnd and msgrcv system calls use size_t to represent the size of the message being transferred. POSIX states that values of msgsz greater than SSIZE_MAX cause the result to be implementation-defined. On Linux, this equates to returning -EINVAL if (long) msgsz < 0. For compat tasks where !CONFIG_ARCH_WANT_OLD_COMPAT_IPC and compat_size_t is smaller than size_t, negative size values passed from userspace will be interpreted as positive values by do_msg{rcv,snd} and will fail to exit early with -EINVAL. This patch changes the compat prototypes for msg{rcv,snd} so that the message size is represented as a compat_ssize_t, which we cast to the native ssize_t type for the core IPC code. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
Commit 48b25c43 ("ipc: provide generic compat versions of IPC syscalls") added a new ARCH_WANT_OLD_COMPAT_IPC config option for architectures to select if their compat target requires the old IPC syscall interface. For architectures (such as AArch64) that do not require the internal calling conventions provided by this option, but have a compat target where the C library passes the IPC_64 flag explicitly, compat_ipc_parse_version no longer strips out the flag before calling the native system call implementation, resulting in unknown SHM/IPC commands and -EINVAL being returned to userspace. This patch separates the selection of the internal calling conventions for the IPC syscalls from the version parsing, allowing architectures to select __ARCH_WANT_COMPAT_IPC_PARSE_VERSION if they want to use version parsing whilst retaining the newer syscall calling conventions. Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Deacon 提交于
If the SHMLBA definition for a native task differs from the definition for a compat task, the do_shmat() function would need to handle both. This patch introduces COMPAT_SHMLBA, which is used by the compat shmat syscall when calling the ipc code and allows architectures such as AArch64 (where the native SHMLBA is 64k but the compat (AArch32) definition is 16k) to provide the correct semantics for compat IPC system calls. Cc: David S. Miller <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 7月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 14 7月, 2012 2 次提交
-
-
由 Al Viro 提交于
all we want is a boolean flag, same as the method gets now Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
boolean "does it have to be exclusive?" flag is passed instead; Local filesystem should just ignore it - the object is guaranteed not to be there yet. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 6月, 2012 1 次提交
-
-
由 Will Deacon 提交于
Commit 17cf28af ("mm/fs: remove truncate_range") removed the truncate_range inode operation in favour of the fallocate file operation. When using SYSV IPC shared memory segments, calling madvise with the MADV_REMOVE advice on an area of shared memory will attempt to invoke the .fallocate function for the shm_file_operations, which is NULL and therefore returns -EOPNOTSUPP to userspace. The previous behaviour would inherit the inode_operations from the underlying tmpfs file and invoke truncate_range there. This patch restores the previous behaviour by wrapping the underlying fallocate function in shm_fallocate, as we do for fsync. [hughd@google.com: use -ENOTSUPP in shm_fallocate()] Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 6月, 2012 1 次提交
-
-
由 Al Viro 提交于
after all, 0 bytes and 0 pages is the same thing... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-