提交 2990821d 编写于 作者: L Linus Torvalds

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
  MIPS: Alchemy: Fix reset for MTX-1 and XXS1500
  MIPS: MTX-1: Make au1000_eth probe all PHY addresses
  MIPS: Jz4740: Add HAVE_CLK
  MIPS: Move idle task creation to work queue
  MIPS, Perf-events: Use unsigned delta for right shift in event update
  MIPS, Perf-events: Work with the new callchain interface
  MIPS, Perf-events: Fix event check in validate_event()
  MIPS, Perf-events: Work with the new PMU interface
  MIPS, Perf-events: Work with irq_work
  MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
  MIPS: Loongson: Fix potentially wrong string handling
  MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
  MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
  MIPS: Remove unused code from arch/mips/kernel/syscall.c
  MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
  MIPS: MSP: Fix MSP71xx bpci interrupt handler return value
  MIPS: Select R4K timer lib for all MSP platforms
  MIPS: Loongson: Remove ad-hoc cmdline default
  MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
  MIPS: Add an unreachable return statement to satisfy buggy GCCs.
  ...
......@@ -4,6 +4,7 @@ config MIPS
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_ARCH_KGDB
......@@ -208,6 +209,7 @@ config MACH_JZ4740
select ARCH_REQUIRE_GPIOLIB
select SYS_HAS_EARLY_PRINTK
select HAVE_PWM
select HAVE_CLK
config LASAT
bool "LASAT Networks platforms"
......@@ -333,6 +335,8 @@ config PNX8550_STB810
config PMC_MSP
bool "PMC-Sierra MSP chipsets"
depends on EXPERIMENTAL
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select SWAP_IO_SPACE
select NO_EXCEPT_FILL
......
......@@ -54,8 +54,8 @@ int mtx1_pci_idsel(unsigned int devsel, int assert);
static void mtx1_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
/* Jump to the reset vector */
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
static void mtx1_power_off(void)
......
......@@ -28,6 +28,8 @@
#include <linux/mtd/physmap.h>
#include <mtd/mtd-abi.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
......@@ -140,10 +142,17 @@ static struct __initdata platform_device * mtx1_devs[] = {
&mtx1_mtd,
};
static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
.phy_search_highest_addr = 1,
.phy1_search_mac0 = 1,
};
static int __init mtx1_register_devices(void)
{
int rc;
au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
rc = gpio_request(mtx1_gpio_button[0].gpio,
mtx1_gpio_button[0].desc);
if (rc < 0) {
......
......@@ -36,8 +36,8 @@
static void xxs1500_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
/* Jump to the reset vector */
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
static void xxs1500_power_off(void)
......
......@@ -11,15 +11,5 @@
#ifndef __MIPS_PERF_EVENT_H__
#define __MIPS_PERF_EVENT_H__
/*
* MIPS performance counters do not raise NMI upon overflow, a regular
* interrupt will be signaled. Hence we can do the pending perf event
* work at the tail of the irq handler.
*/
static inline void
set_perf_event_pending(void)
{
}
/* Leave it empty here. The file is required by linux/perf_event.h */
#endif /* __MIPS_PERF_EVENT_H__ */
......@@ -17,29 +17,13 @@
#include <asm/cacheflush.h>
#include <asm/uasm.h>
/*
* If the Instruction Pointer is in module space (0xc0000000), return true;
* otherwise, it is in kernel space (0x80000000), return false.
*
* FIXME: This will not work when the kernel space and module space are the
* same. If they are the same, we need to modify scripts/recordmcount.pl,
* ftrace_make_nop/call() and the other related parts to ensure the
* enabling/disabling of the calling site to _mcount is right for both kernel
* and module.
*/
static inline int in_module(unsigned long ip)
{
return ip & 0x40000000;
}
#include <asm-generic/sections.h>
#ifdef CONFIG_DYNAMIC_FTRACE
#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */
#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */
#define INSN_B_1F_4 0x10000004 /* b 1f; offset = 4 */
#define INSN_B_1F_5 0x10000005 /* b 1f; offset = 5 */
#define INSN_NOP 0x00000000 /* nop */
#define INSN_JAL(addr) \
((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
......@@ -69,6 +53,20 @@ static inline void ftrace_dyn_arch_init_insns(void)
#endif
}
/*
* Check if the address is in kernel space
*
* Clone core_kernel_text() from kernel/extable.c, but doesn't call
* init_kernel_text() for Ftrace doesn't trace functions in init sections.
*/
static inline int in_kernel_space(unsigned long ip)
{
if (ip >= (unsigned long)_stext &&
ip <= (unsigned long)_etext)
return 1;
return 0;
}
static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
{
int faulted;
......@@ -84,6 +82,42 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
return 0;
}
/*
* The details about the calling site of mcount on MIPS
*
* 1. For kernel:
*
* move at, ra
* jal _mcount --> nop
*
* 2. For modules:
*
* 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT
*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
* addiu v1, v1, low_16bit_of_mcount
* move at, ra
* move $12, ra_address
* jalr v1
* sub sp, sp, 8
* 1: offset = 5 instructions
* 2.2 For the Other situations
*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
* addiu v1, v1, low_16bit_of_mcount
* move at, ra
* jalr v1
* nop | move $12, ra_address | sub sp, sp, 8
* 1: offset = 4 instructions
*/
#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
#define MCOUNT_OFFSET_INSNS 5
#else
#define MCOUNT_OFFSET_INSNS 4
#endif
#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS)
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
......@@ -91,39 +125,11 @@ int ftrace_make_nop(struct module *mod,
unsigned long ip = rec->ip;
/*
* We have compiled module with -mlong-calls, but compiled the kernel
* without it, we need to cope with them respectively.
* If ip is in kernel space, no long call, otherwise, long call is
* needed.
*/
if (in_module(ip)) {
#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
/*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000005)
* addiu v1, v1, low_16bit_of_mcount
* move at, ra
* move $12, ra_address
* jalr v1
* sub sp, sp, 8
* 1: offset = 5 instructions
*/
new = INSN_B_1F_5;
#else
/*
* lui v1, hi_16bit_of_mcount --> b 1f (0x10000004)
* addiu v1, v1, low_16bit_of_mcount
* move at, ra
* jalr v1
* nop | move $12, ra_address | sub sp, sp, 8
* 1: offset = 4 instructions
*/
new = INSN_B_1F_4;
#endif
} else {
/*
* move at, ra
* jal _mcount --> nop
*/
new = INSN_NOP;
}
new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
return ftrace_modify_code(ip, new);
}
......@@ -132,8 +138,8 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
unsigned int new;
unsigned long ip = rec->ip;
/* ip, module: 0xc0000000, kernel: 0x80000000 */
new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
new = in_kernel_space(ip) ? insn_jal_ftrace_caller :
insn_lui_v1_hi16_mcount;
return ftrace_modify_code(ip, new);
}
......@@ -190,29 +196,25 @@ int ftrace_disable_ftrace_graph_caller(void)
#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */
#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */
unsigned long ftrace_get_parent_addr(unsigned long self_addr,
unsigned long parent,
unsigned long parent_addr,
unsigned long fp)
unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
old_parent_ra, unsigned long parent_ra_addr, unsigned long fp)
{
unsigned long sp, ip, ra;
unsigned long sp, ip, tmp;
unsigned int code;
int faulted;
/*
* For module, move the ip from calling site of mcount to the
* instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
* kernel, move to the instruction "move ra, at"(offset is 12)
* For module, move the ip from the return address after the
* instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for
* kernel, move after the instruction "move ra, at"(offset is 16)
*/
ip = self_addr - (in_module(self_addr) ? 20 : 12);
ip = self_ra - (in_kernel_space(self_ra) ? 16 : 24);
/*
* search the text until finding the non-store instruction or "s{d,w}
* ra, offset(sp)" instruction
*/
do {
ip -= 4;
/* get the code at "ip": code = *(unsigned int *)ip; */
safe_load_code(code, ip, faulted);
......@@ -224,18 +226,20 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
* store the ra on the stack
*/
if ((code & S_R_SP) != S_R_SP)
return parent_addr;
return parent_ra_addr;
} while (((code & S_RA_SP) != S_RA_SP));
/* Move to the next instruction */
ip -= 4;
} while ((code & S_RA_SP) != S_RA_SP);
sp = fp + (code & OFFSET_MASK);
/* ra = *(unsigned long *)sp; */
safe_load_stack(ra, sp, faulted);
/* tmp = *(unsigned long *)sp; */
safe_load_stack(tmp, sp, faulted);
if (unlikely(faulted))
return 0;
if (ra == parent)
if (tmp == old_parent_ra)
return sp;
return 0;
}
......@@ -246,21 +250,21 @@ unsigned long ftrace_get_parent_addr(unsigned long self_addr,
* Hook the return address and push it in the stack of return addrs
* in current thread info.
*/
void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
unsigned long fp)
{
unsigned long old;
unsigned long old_parent_ra;
struct ftrace_graph_ent trace;
unsigned long return_hooker = (unsigned long)
&return_to_handler;
int faulted;
int faulted, insns;
if (unlikely(atomic_read(&current->tracing_graph_pause)))
return;
/*
* "parent" is the stack address saved the return address of the caller
* of _mcount.
* "parent_ra_addr" is the stack address saved the return address of
* the caller of _mcount.
*
* if the gcc < 4.5, a leaf function does not save the return address
* in the stack address, so, we "emulate" one in _mcount's stack space,
......@@ -275,37 +279,44 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
* do it in ftrace_graph_caller of mcount.S.
*/
/* old = *parent; */
safe_load_stack(old, parent, faulted);
/* old_parent_ra = *parent_ra_addr; */
safe_load_stack(old_parent_ra, parent_ra_addr, faulted);
if (unlikely(faulted))
goto out;
#ifndef KBUILD_MCOUNT_RA_ADDRESS
parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
(unsigned long)parent, fp);
parent_ra_addr = (unsigned long *)ftrace_get_parent_ra_addr(self_ra,
old_parent_ra, (unsigned long)parent_ra_addr, fp);
/*
* If fails when getting the stack address of the non-leaf function's
* ra, stop function graph tracer and return
*/
if (parent == 0)
if (parent_ra_addr == 0)
goto out;
#endif
/* *parent = return_hooker; */
safe_store_stack(return_hooker, parent, faulted);
/* *parent_ra_addr = return_hooker; */
safe_store_stack(return_hooker, parent_ra_addr, faulted);
if (unlikely(faulted))
goto out;
if (ftrace_push_return_trace(old, self_addr, &trace.depth, fp) ==
-EBUSY) {
*parent = old;
if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp)
== -EBUSY) {
*parent_ra_addr = old_parent_ra;
return;
}
trace.func = self_addr;
/*
* Get the recorded ip of the current mcount calling site in the
* __mcount_loc section, which will be used to filter the function
* entries configured through the tracing/set_graph_function interface.
*/
insns = in_kernel_space(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
current->curr_ret_stack--;
*parent = old;
*parent_ra_addr = old_parent_ra;
}
return;
out:
......
......@@ -161,41 +161,6 @@ mipspmu_event_set_period(struct perf_event *event,
return ret;
}
static int mipspmu_enable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
/* To look for a free counter for this event. */
idx = mipspmu->alloc_counter(cpuc, hwc);
if (idx < 0) {
err = idx;
goto out;
}
/*
* If there is an event in the counter we are going to use then
* make sure it is disabled.
*/
event->hw.idx = idx;
mipspmu->disable_event(idx);
cpuc->events[idx] = event;
/* Set the period for the event. */
mipspmu_event_set_period(event, hwc, idx);
/* Enable the event. */
mipspmu->enable_event(hwc, idx);
/* Propagate our changes to the userspace mapping. */
perf_event_update_userpage(event);
out:
return err;
}
static void mipspmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
......@@ -204,7 +169,7 @@ static void mipspmu_event_update(struct perf_event *event,
unsigned long flags;
int shift = 64 - TOTAL_BITS;
s64 prev_raw_count, new_raw_count;
s64 delta;
u64 delta;
again:
prev_raw_count = local64_read(&hwc->prev_count);
......@@ -231,32 +196,90 @@ static void mipspmu_event_update(struct perf_event *event,
return;
}
static void mipspmu_disable(struct perf_event *event)
static void mipspmu_start(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
if (!mipspmu)
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/* Set the period for the event. */
mipspmu_event_set_period(event, hwc, hwc->idx);
/* Enable the event. */
mipspmu->enable_event(hwc, hwc->idx);
}
static void mipspmu_stop(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
if (!mipspmu)
return;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* We are working on a local event. */
mipspmu->disable_event(hwc->idx);
barrier();
mipspmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
static int mipspmu_add(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
int idx;
int err = 0;
perf_pmu_disable(event->pmu);
WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
/* To look for a free counter for this event. */
idx = mipspmu->alloc_counter(cpuc, hwc);
if (idx < 0) {
err = idx;
goto out;
}
/* We are working on a local event. */
/*
* If there is an event in the counter we are going to use then
* make sure it is disabled.
*/
event->hw.idx = idx;
mipspmu->disable_event(idx);
cpuc->events[idx] = event;
barrier();
mipspmu_event_update(event, hwc, idx);
cpuc->events[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
mipspmu_start(event, PERF_EF_RELOAD);
/* Propagate our changes to the userspace mapping. */
perf_event_update_userpage(event);
out:
perf_pmu_enable(event->pmu);
return err;
}
static void mipspmu_unthrottle(struct perf_event *event)
static void mipspmu_del(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
mipspmu->enable_event(hwc, hwc->idx);
WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
mipspmu_stop(event, PERF_EF_UPDATE);
cpuc->events[idx] = NULL;
clear_bit(idx, cpuc->used_mask);
perf_event_update_userpage(event);
}
static void mipspmu_read(struct perf_event *event)
......@@ -270,12 +293,17 @@ static void mipspmu_read(struct perf_event *event)
mipspmu_event_update(event, hwc, hwc->idx);
}
static struct pmu pmu = {
.enable = mipspmu_enable,
.disable = mipspmu_disable,
.unthrottle = mipspmu_unthrottle,
.read = mipspmu_read,
};
static void mipspmu_enable(struct pmu *pmu)
{
if (mipspmu)
mipspmu->start();
}
static void mipspmu_disable(struct pmu *pmu)
{
if (mipspmu)
mipspmu->stop();
}
static atomic_t active_events = ATOMIC_INIT(0);
static DEFINE_MUTEX(pmu_reserve_mutex);
......@@ -318,6 +346,82 @@ static void mipspmu_free_irq(void)
perf_irq = save_perf_irq;
}
/*
* mipsxx/rm9000/loongson2 have different performance counters, they have
* specific low-level init routines.
*/
static void reset_counters(void *arg);
static int __hw_perf_event_init(struct perf_event *event);
static void hw_perf_event_destroy(struct perf_event *event)
{
if (atomic_dec_and_mutex_lock(&active_events,
&pmu_reserve_mutex)) {
/*
* We must not call the destroy function with interrupts
* disabled.
*/
on_each_cpu(reset_counters,
(void *)(long)mipspmu->num_counters, 1);
mipspmu_free_irq();
mutex_unlock(&pmu_reserve_mutex);
}
}
static int mipspmu_event_init(struct perf_event *event)
{
int err = 0;
switch (event->attr.type) {
case PERF_TYPE_RAW:
case PERF_TYPE_HARDWARE:
case PERF_TYPE_HW_CACHE:
break;
default:
return -ENOENT;
}
if (!mipspmu || event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
return -ENODEV;
if (!atomic_inc_not_zero(&active_events)) {
if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
atomic_dec(&active_events);
return -ENOSPC;
}
mutex_lock(&pmu_reserve_mutex);
if (atomic_read(&active_events) == 0)
err = mipspmu_get_irq();
if (!err)
atomic_inc(&active_events);
mutex_unlock(&pmu_reserve_mutex);
}
if (err)
return err;
err = __hw_perf_event_init(event);
if (err)
hw_perf_event_destroy(event);
return err;
}
static struct pmu pmu = {
.pmu_enable = mipspmu_enable,
.pmu_disable = mipspmu_disable,
.event_init = mipspmu_event_init,
.add = mipspmu_add,
.del = mipspmu_del,
.start = mipspmu_start,
.stop = mipspmu_stop,
.read = mipspmu_read,
};
static inline unsigned int
mipspmu_perf_event_encode(const struct mips_perf_event *pev)
{
......@@ -382,8 +486,9 @@ static int validate_event(struct cpu_hw_events *cpuc,
{
struct hw_perf_event fake_hwc = event->hw;
if (event->pmu && event->pmu != &pmu)
return 0;
/* Allow mixed event group. So return 1 to pass validation. */
if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0;
}
......@@ -409,73 +514,6 @@ static int validate_group(struct perf_event *event)
return 0;
}
/*
* mipsxx/rm9000/loongson2 have different performance counters, they have
* specific low-level init routines.
*/
static void reset_counters(void *arg);
static int __hw_perf_event_init(struct perf_event *event);
static void hw_perf_event_destroy(struct perf_event *event)
{
if (atomic_dec_and_mutex_lock(&active_events,
&pmu_reserve_mutex)) {
/*
* We must not call the destroy function with interrupts
* disabled.
*/
on_each_cpu(reset_counters,
(void *)(long)mipspmu->num_counters, 1);
mipspmu_free_irq();
mutex_unlock(&pmu_reserve_mutex);
}
}
const struct pmu *hw_perf_event_init(struct perf_event *event)
{
int err = 0;
if (!mipspmu || event->cpu >= nr_cpumask_bits ||
(event->cpu >= 0 && !cpu_online(event->cpu)))
return ERR_PTR(-ENODEV);
if (!atomic_inc_not_zero(&active_events)) {
if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
atomic_dec(&active_events);
return ERR_PTR(-ENOSPC);
}
mutex_lock(&pmu_reserve_mutex);
if (atomic_read(&active_events) == 0)
err = mipspmu_get_irq();
if (!err)
atomic_inc(&active_events);
mutex_unlock(&pmu_reserve_mutex);
}
if (err)
return ERR_PTR(err);
err = __hw_perf_event_init(event);
if (err)
hw_perf_event_destroy(event);
return err ? ERR_PTR(err) : &pmu;
}
void hw_perf_enable(void)
{
if (mipspmu)
mipspmu->start();
}
void hw_perf_disable(void)
{
if (mipspmu)
mipspmu->stop();
}
/* This is needed by specific irq handlers in perf_event_*.c */
static void
handle_associated_event(struct cpu_hw_events *cpuc,
......@@ -496,21 +534,13 @@ handle_associated_event(struct cpu_hw_events *cpuc,
#include "perf_event_mipsxx.c"
/* Callchain handling code. */
static inline void
callchain_store(struct perf_callchain_entry *entry,
u64 ip)
{
if (entry->nr < PERF_MAX_STACK_DEPTH)
entry->ip[entry->nr++] = ip;
}
/*
* Leave userspace callchain empty for now. When we find a way to trace
* the user stack callchains, we add here.
*/
static void
perf_callchain_user(struct pt_regs *regs,
struct perf_callchain_entry *entry)
void perf_callchain_user(struct perf_callchain_entry *entry,
struct pt_regs *regs)
{
}
......@@ -523,23 +553,21 @@ static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
while (!kstack_end(sp)) {
addr = *sp++;
if (__kernel_text_address(addr)) {
callchain_store(entry, addr);
perf_callchain_store(entry, addr);
if (entry->nr >= PERF_MAX_STACK_DEPTH)
break;
}
}
}
static void
perf_callchain_kernel(struct pt_regs *regs,
struct perf_callchain_entry *entry)
void perf_callchain_kernel(struct perf_callchain_entry *entry,
struct pt_regs *regs)
{
unsigned long sp = regs->regs[29];
#ifdef CONFIG_KALLSYMS
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
callchain_store(entry, PERF_CONTEXT_KERNEL);
if (raw_show_trace || !__kernel_text_address(pc)) {
unsigned long stack_page =
(unsigned long)task_stack_page(current);
......@@ -549,53 +577,12 @@ perf_callchain_kernel(struct pt_regs *regs,
return;
}
do {
callchain_store(entry, pc);
perf_callchain_store(entry, pc);
if (entry->nr >= PERF_MAX_STACK_DEPTH)
break;
pc = unwind_stack(current, &sp, pc, &ra);
} while (pc);
#else
callchain_store(entry, PERF_CONTEXT_KERNEL);
save_raw_perf_callchain(entry, sp);
#endif
}
static void
perf_do_callchain(struct pt_regs *regs,
struct perf_callchain_entry *entry)
{
int is_user;
if (!regs)
return;
is_user = user_mode(regs);
if (!current || !current->pid)
return;
if (is_user && current->state != TASK_RUNNING)
return;
if (!is_user) {
perf_callchain_kernel(regs, entry);
if (current->mm)
regs = task_pt_regs(current);
else
regs = NULL;
}
if (regs)
perf_callchain_user(regs, entry);
}
static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
struct perf_callchain_entry *
perf_callchain(struct pt_regs *regs)
{
struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
entry->nr = 0;
perf_do_callchain(regs, entry);
return entry;
}
......@@ -696,7 +696,7 @@ static int mipsxx_pmu_handle_shared_irq(void)
* interrupt, not NMI.
*/
if (handled == IRQ_HANDLED)
perf_event_do_pending();
irq_work_run();
#ifdef CONFIG_MIPS_MT_SMP
read_unlock(&pmuint_rwlock);
......@@ -1045,6 +1045,8 @@ init_hw_perf_events(void)
"CPU, irq %d%s\n", mipspmu->name, counters, irq,
irq < 0 ? " (share with timer interrupt)" : "");
perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
return 0;
}
early_initcall(init_hw_perf_events);
......
......@@ -84,7 +84,7 @@ static int protected_save_fp_context(struct sigcontext __user *sc)
static int protected_restore_fp_context(struct sigcontext __user *sc)
{
int err, tmp;
int err, tmp __maybe_unused;
while (1) {
lock_fpu_owner();
own_fpu_inatomic(0);
......
......@@ -115,7 +115,7 @@ static int protected_save_fp_context32(struct sigcontext32 __user *sc)
static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
{
int err, tmp;
int err, tmp __maybe_unused;
while (1) {
lock_fpu_owner();
own_fpu_inatomic(0);
......
......@@ -193,6 +193,22 @@ void __devinit smp_prepare_boot_cpu(void)
*/
static struct task_struct *cpu_idle_thread[NR_CPUS];
struct create_idle {
struct work_struct work;
struct task_struct *idle;
struct completion done;
int cpu;
};
static void __cpuinit do_fork_idle(struct work_struct *work)
{
struct create_idle *c_idle =
container_of(work, struct create_idle, work);
c_idle->idle = fork_idle(c_idle->cpu);
complete(&c_idle->done);
}
int __cpuinit __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
......@@ -203,8 +219,19 @@ int __cpuinit __cpu_up(unsigned int cpu)
* Linux can schedule processes on this slave.
*/
if (!cpu_idle_thread[cpu]) {
idle = fork_idle(cpu);
cpu_idle_thread[cpu] = idle;
/*
* Schedule work item to avoid forking user task
* Ported from arch/x86/kernel/smpboot.c
*/
struct create_idle c_idle = {
.cpu = cpu,
.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
schedule_work(&c_idle.work);
wait_for_completion(&c_idle.done);
idle = cpu_idle_thread[cpu] = c_idle.idle;
if (IS_ERR(idle))
panic(KERN_ERR "Fork failed for CPU %d", cpu);
......
......@@ -383,12 +383,11 @@ save_static_function(sys_sysmips);
static int __used noinline
_sys_sysmips(nabi_no_regargs struct pt_regs regs)
{
long cmd, arg1, arg2, arg3;
long cmd, arg1, arg2;
cmd = regs.regs[4];
arg1 = regs.regs[5];
arg2 = regs.regs[6];
arg3 = regs.regs[7];
switch (cmd) {
case MIPS_ATOMIC_SET:
......@@ -405,7 +404,7 @@ _sys_sysmips(nabi_no_regargs struct pt_regs regs)
if (arg1 & 2)
set_thread_flag(TIF_LOGADE);
else
clear_thread_flag(TIF_FIXADE);
clear_thread_flag(TIF_LOGADE);
return 0;
......
......@@ -148,9 +148,9 @@ struct {
spinlock_t tc_list_lock;
struct list_head tc_list; /* Thread contexts */
} vpecontrol = {
.vpe_list_lock = SPIN_LOCK_UNLOCKED,
.vpe_list_lock = __SPIN_LOCK_UNLOCKED(vpe_list_lock),
.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
.tc_list_lock = SPIN_LOCK_UNLOCKED,
.tc_list_lock = __SPIN_LOCK_UNLOCKED(tc_list_lock),
.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
};
......
if MACH_LOONGSON
choice
prompt "Machine Type"
depends on MACH_LOONGSON
config LEMOTE_FULOONG2E
bool "Lemote Fuloong(2e) mini-PC"
......@@ -87,3 +88,5 @@ config LOONGSON_UART_BASE
config LOONGSON_MC146818
bool
default n
endif # MACH_LOONGSON
......@@ -44,10 +44,5 @@ void __init prom_init_cmdline(void)
strcat(arcs_cmdline, " ");
}
if ((strstr(arcs_cmdline, "console=")) == NULL)
strcat(arcs_cmdline, " console=ttyS0,115200");
if ((strstr(arcs_cmdline, "root=")) == NULL)
strcat(arcs_cmdline, " root=/dev/hda1");
prom_init_machtype();
}
......@@ -41,7 +41,7 @@ void __weak __init mach_prom_init_machtype(void)
void __init prom_init_machtype(void)
{
char *p, str[MACHTYPE_LEN];
char *p, str[MACHTYPE_LEN + 1];
int machtype = MACH_LEMOTE_FL2E;
mips_machtype = LOONGSON_MACHTYPE;
......@@ -53,6 +53,7 @@ void __init prom_init_machtype(void)
}
p += strlen("machtype=");
strncpy(str, p, MACHTYPE_LEN);
str[MACHTYPE_LEN] = '\0';
p = strstr(str, " ");
if (p)
*p = '\0';
......
......@@ -70,7 +70,7 @@
#define COMPXSP \
unsigned xm; int xe; int xs; int xc
unsigned xm; int xe; int xs __maybe_unused; int xc
#define COMPYSP \
unsigned ym; int ye; int ys; int yc
......@@ -104,7 +104,7 @@
#define COMPXDP \
u64 xm; int xe; int xs; int xc
u64 xm; int xe; int xs __maybe_unused; int xc
#define COMPYDP \
u64 ym; int ye; int ys; int yc
......
......@@ -324,7 +324,7 @@ int page_is_ram(unsigned long pagenr)
void __init paging_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
unsigned long lastpfn;
unsigned long lastpfn __maybe_unused;
pagetable_init();
......
......@@ -109,6 +109,8 @@ static bool scratchpad_available(void)
static int scratchpad_offset(int i)
{
BUG();
/* Really unreachable, but evidently some GCC want this. */
return 0;
}
#endif
/*
......
......@@ -308,7 +308,7 @@ static struct resource pci_mem_resource = {
* RETURNS: PCIBIOS_SUCCESSFUL - success
*
****************************************************************************/
static int bpci_interrupt(int irq, void *dev_id)
static irqreturn_t bpci_interrupt(int irq, void *dev_id)
{
struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
unsigned int stat = preg->if_status;
......@@ -326,7 +326,7 @@ static int bpci_interrupt(int irq, void *dev_id)
/* write to clear all asserted interrupts */
preg->if_status = stat;
return PCIBIOS_SUCCESSFUL;
return IRQ_HANDLED;
}
/*****************************************************************************
......
......@@ -4,15 +4,11 @@ choice
config PMC_MSP4200_EVAL
bool "PMC-Sierra MSP4200 Eval Board"
select CEVT_R4K
select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
config PMC_MSP4200_GW
bool "PMC-Sierra MSP4200 VoIP Gateway"
select CEVT_R4K
select CSRC_R4K
select IRQ_MSP_SLP
select HW_HAS_PCI
......
......@@ -81,7 +81,7 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_rate/2;
}
unsigned int __init get_c0_compare_int(void)
unsigned int __cpuinit get_c0_compare_int(void)
{
return MSP_INT_VPE0_TIMER;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册