Skip to content

R
rt-thread

2345VOR / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 d23a65d5 编写于 作者: B Bernard Xiong
浏览文件
操作

Merge branch 'master' into dev-4.0.x

上级 46608823 8483a50d
展开全部 隐藏空白更改
内联 并排
Showing with 9865 addition and 14562 deletion
bsp/amebaz/.config
浏览文件 @ d23a65d5
......@@ -13,15 +13,24 @@ CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=1000
CONFIG_RT_DEBUG=y
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_DEBUG_INIT=0
CONFIG_RT_DEBUG_THREAD=0
CONFIG_RT_USING_HOOK=y
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=256
CONFIG_RT_USING_TIMER_SOFT=y
CONFIG_RT_TIMER_THREAD_PRIO=4
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
CONFIG_RT_TIMER_THREAD_STACK_SIZE=1024
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# Inter-Thread communication
......@@ -53,13 +62,14 @@ CONFIG_RT_USING_DEVICE=y
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="dbg"
# CONFIG_RT_USING_MODULE is not set
#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
# CONFIG_RT_USING_USER_MAIN is not set
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
......@@ -82,7 +92,7 @@ CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
# CONFIG_FINSH_USING_MSH_ONLY is not set
CONFIG_FINSH_USING_MSH_ONLY=y
CONFIG_FINSH_ARG_MAX=10
#
......@@ -94,26 +104,49 @@ CONFIG_FINSH_ARG_MAX=10
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_PIN is not set
# CONFIG_RT_USING_PWM is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_MTD is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
CONFIG_RT_USING_WIFI=y
CONFIG_RT_USING_WLAN_STA=y
CONFIG_RT_USING_WLAN_AP=y
CONFIG_WIFI_DEVICE_STA_NAME="w0"
CONFIG_WIFI_DEVICE_AP_NAME="ap"
# CONFIG_RT_USING_AUDIO is not set
#
# Using WiFi
#
CONFIG_RT_USING_WIFI=y
CONFIG_RT_WLAN_DEVICE_STA_NAME="wlan0"
CONFIG_RT_WLAN_DEVICE_AP_NAME="wlan1"
CONFIG_RT_WLAN_DEFAULT_PROT="lwip"
CONFIG_RT_WLAN_SCAN_WAIT_MS=10000
CONFIG_RT_WLAN_CONNECT_WAIT_MS=10000
CONFIG_RT_WLAN_SSID_MAX_LENGTH=32
CONFIG_RT_WLAN_PASSWORD_MAX_LENGTH=32
CONFIG_RT_WLAN_SCAN_SORT=y
CONFIG_RT_WLAN_CFG_INFO_MAX=3
CONFIG_RT_WLAN_WORKQUEUE_THREAD_NAME="wlan_job"
CONFIG_RT_WLAN_WORKQUEUE_THREAD_SIZE=2048
CONFIG_RT_WLAN_WORKQUEUE_THREAD_PRIO=22
CONFIG_RT_WLAN_DEV_EVENT_NUM=2
# CONFIG_RT_WLAN_PROT_LWIP_PBUF_FORCE is not set
CONFIG_RT_WLAN_DEBUG=y
CONFIG_RT_WLAN_CMD_DEBUG=y
# CONFIG_RT_WLAN_MGNT_DEBUG is not set
# CONFIG_RT_WLAN_DEV_DEBUG is not set
# CONFIG_RT_WLAN_PROT_DEBUG is not set
# CONFIG_RT_WLAN_CFG_DEBUG is not set
# CONFIG_RT_WLAN_LWIP_DEBUG is not set
#
# Using USB
#
......@@ -127,15 +160,21 @@ CONFIG_RT_USING_LIBC=y
# CONFIG_RT_USING_PTHREADS is not set
#
# Network stack
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# light weight TCP/IP stack
#
CONFIG_RT_USING_LWIP=y
CONFIG_RT_USING_LWIP141=y
# CONFIG_RT_USING_LWIP202 is not set
# CONFIG_RT_USING_LWIP141 is not set
CONFIG_RT_USING_LWIP202=y
# CONFIG_RT_USING_LWIP_IPV6 is not set
CONFIG_RT_LWIP_IGMP=y
CONFIG_RT_LWIP_ICMP=y
# CONFIG_RT_LWIP_SNMP is not set
......@@ -178,12 +217,22 @@ CONFIG_LWIP_SO_SNDTIMEO=1
CONFIG_LWIP_SO_RCVBUF=1
# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_RT_LWIP_STATS is not set
# CONFIG_RT_LWIP_DEBUG is not set
#
# Modbus master and slave stack
#
# CONFIG_RT_USING_MODBUS is not set
# CONFIG_LWIP_USING_DHCPD is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
CONFIG_LWIP_USING_DHCPD=y
CONFIG_DHCPD_SERVER_IP="192.168.169.1"
CONFIG_DHCPD_USING_ROUTER=y
# CONFIG_LWIP_USING_CUSTOMER_DNS_SERVER is not set
#
# VBUS(Virtual Software BUS)
......@@ -212,7 +261,6 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
#
# Wi-Fi
......@@ -230,7 +278,16 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
#
# security packages
......@@ -242,6 +299,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
......@@ -258,6 +316,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_RDB is not set
#
# system packages
......@@ -271,22 +330,29 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_STM32F4_HAL is not set
# CONFIG_PKG_USING_STM32F4_DRIVERS is not set
CONFIG_PKG_USING_REALTEK_AMEBA=y
CONFIG_PKG_REALTEK_AMEBA_PATH="/packages/peripherals/realtek_ameba"
CONFIG_PKG_USING_REALTEK_AMEBA_LATEST_VERSION=y
# CONFIG_PKG_USING_REALTEK_AMEBA_V100 is not set
CONFIG_PKG_REALTEK_AMEBA_VER="latest"
# CONFIG_PKG_USING_CC3200_SDK is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
......@@ -298,17 +364,57 @@ CONFIG_PKG_REALTEK_AMEBA_VER="latest"
#
# sample package
#
# CONFIG_PKG_USING_SAMPLES is not set
#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
#
# example package: hello
#
# CONFIG_PKG_USING_HELLO is not set
#
# Privated Packages of RealThread
#
# CONFIG_PKG_USING_CODEC is not set
# CONFIG_PKG_USING_PLAYER is not set
# CONFIG_PKG_USING_PERSIMMON_SRC is not set
#
# Network Utilities
#
# CONFIG_PKG_USING_MDNS is not set
# CONFIG_PKG_USING_UPNP is not set
# CONFIG_PKG_USING_WICED is not set
# CONFIG_PKG_USING_CLOUDSDK is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_POWER_MANAGER is not set
# CONFIG_PKG_USING_RT_OTA is not set
# CONFIG_PKG_USING_RDBD_SRC is not set
# CONFIG_PKG_USING_RTINSIGHT is not set
# CONFIG_PKG_USING_SMARTCONFIG is not set
#
# Test Packages of RealThread
#
# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
# CONFIG_PKG_USING_JS_PERSIMMON is not set
#
# Env config
#
# CONFIG_SYS_AUTO_UPDATE_PKGS is not set
# CONFIG_SYS_CREATE_MDK_IAR_PROJECT is not set
# CONFIG_SYS_PKGS_DOWNLOAD_ACCELERATE is not set
CONFIG_RT_USING_UART0=y
#
# External Libraries
#
CONFIG_RT_USING_SMARTCONFIG_LIB=y
# CONFIG_BSP_USING_UART0 is not set
CONFIG_BSP_USING_WIFI=y
bsp/amebaz/Kconfig
浏览文件 @ d23a65d5
......@@ -26,10 +26,7 @@ config $ENV_DIR
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
source "$ENV_DIR/tools/scripts/cmds/Kconfig"
config RT_USING_UART0
bool "Using RT_USING_UART0"
default y
source "$BSP_DIR/libraries/Kconfig"
source "$BSP_DIR/drivers/Kconfig"
select PKG_USING_REALTEK_AMEBA
bsp/amebaz/README.md
浏览文件 @ d23a65d5
# amebaz on RT-Thread
## 1. 简介
## 1 简介
amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
包括如下硬件特性：
amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片，属于rtl8710b系列。硬件特性如下：
| 硬件 | 描述 |
| -- | -- |
......@@ -11,25 +10,42 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
|CPU| Cortex-M4 |
|主频| 125MHz |
## 2. 编译说明
## 2 编译说明
| 环境 | 说明 |
| ------------ | ------------------------------------------------------------ |
| PC操作系统 | Linux/MacOS/Windows |
| 编译器 | arm-none-eabi-gcc version 6.3.1 20170620 (release)/iar |
| 构建工具 | scons/iar |
| 编译器 | arm-none-eabi-gcc version 6.3.1 20170620 (release) |
| 构建工具 | scons |
| 依赖软件环境 | Env工具/(IAR或arm-none-eabi-gcc)/git/调试器驱动 |
1) 下载源码
## 3 下载源码
```bash
git clone https://github.com/RT-Thread/rt-thread.git
```
2) 配置工程并准备env
## 4 环境准备
（Linux/Mac）
### 4.1 Windows 环境准备
Windows环境下有两种开发环境，`GCC toolchain` 和 `IAR IDE`，根据不同的需求自行选择。
#### 4.1.1 IAR 发开环境
IAR 开发环境需要开发者自己安装软件，安装过程这里就不特别说明了。amebaz工程当前仅支持 `IAR 7.X` 的版本。
#### 4.4.2 GCC 开发环境
GCC开发使用 RT-Thread 官方提供的 env 工具，该工具集成 GCC 工具链，还具有编译构建环境、图形化系统配置及软件包管理功能。
下载地址：[点击下载env工具](https://www.rt-thread.org/page/download.html)
第一次使用env工具的开发者可以去这里查看教程：[RT-Thread env 工具用户手册](https://www.rt-thread.org/document/site/rtthread-development-guide/rtthread-tool-manual/env/env-user-manual/)。
### 4.2 Linux/Mac 环境准备
Linux/Mac 仅支持 GCC 工具链。
```bash
cd rt-thread/bsp/amebaz
......@@ -38,68 +54,62 @@ amebaz 是由Realtek推出的Cortex-M4内核的WiFi SOC芯片rtl8710b系列
pkgs --upgrade
```
（Windows）
## 5 配置工程（可选）
>在[RT-Thread官网][1]下载ENV工具包
### 5.1 Windows 配置工程
3) 配置芯片型号
（Linux/Mac）
配置工程，需要在相应的工程目录下使用 `menuconfig` 命令打开图形界面，开发者根据自己的需求开关功能组件。
```bash
scons --menuconfig
menuconfig
```
（Windows(ENV环境中)）
### 5.2 Linux/Mac 配置工程
（Linux/Mac）
```bash
menuconfig
scons --menuconfig
```
在menuconfig页面配置并选择对应的芯片型号，若开发环境为IAR，则需要生成工程
4) 下载package
## 6 更新软件包
amebaz配套的驱动库以package形式提供，故需先下载对应的package(realtek-ameba)，请使用env下载package
amebaz 配套的驱动库以 package 形式提供，故需先下载对应的 package(realtek-ameba)，在工程目录下，使用下面命令下载软件包。
```bash
pkgs --update
```
5) 生成工程(Mac/Linux下请跳过此步骤)
（Windows IAR）
## 7 编译
```bash
SET RTT_CC=iar
scons --target=iar -s
```
### 7.1 Windows 编译工程
*该板级支持包不支持生成mdk的工程
#### 7.1.1 IAR 编译工程
先打开工程目录下的IAR工程（project.eww），然后单击 Project 选项卡，单击 Rebuild All 选项，进行编译
6) 编译
![ ](figures/iar_build.png)
使用IAR请参见对应教程
#### 7.1.2 GCC 编译工程
（Windows arm-none-eabi-gcc）
使用以下指令设置gcc路径
可以使用env编译工程，无需设置GCC工具链路径，直接在 rt-thread/bsp/amebaz 工程目录下输入 `scons` 编译即可。编译完成后，在工程目录下生成 `image2_all_ota1.bin` 文件。
```bash
SET RTT_EXEC_PATH=[GCC路径]
scons
```
（Linux/Mac arm-none-eabi-gcc）
使用以下指令设置gcc路径
### 7.2 Linux/Mac 编译工程
如果没有配置GCC路径的环境变量，则需要使用以下指令设置gcc路径。
```bash
export RTT_EXEC_PATH=[GCC路径]
```
编译（WindowsLinux/Mac arm-none-eabi-gcc）
设置 GCC 路径后，使用 `scons` 编译工程。
```bash
scons -j4
scons
```
出现下列信息即为编译成功
......@@ -128,35 +138,153 @@ Done...
scons: done building targets.
```
如果编译正确无误，会产生image2_all_ota1.bin文件。
如果编译正确无误，会在工程目录下生成 image2_all_ota1.bin 文件。
## 8 烧写及执行
### 8.1 IAR下载
下载程序分为两部分：
（a）先使用jlink工具正确连接A14(CLK),A15(TMS),GND,VCC引脚
（b）打开 IAR 工程并完成编译后，单击 Project 选项卡下 Download 选项，选择 Download active application 下载程序。
![IAR下载程序](figures/iar_download.png)
（c）短按复位按钮，连接串口查看调试信息
### 8.2 串口下载
串口下载分为三个步骤
（a）板子进入下载模式
板子使用 `micros usb` 上电，然后按住 `FLASH` 键不放手，短按 `RST` 键，松开 `RST` 和 `FLASH` 键进入下载模式。
（b）配置下载工具
## 3. 烧写及执行
打开 Image Tool 下载工具配置使用，选择 `micros usb` 所对应的串口端口，选择波特率，默认波特率 1.5Mbps，然后打开串口端口，如下载工具图“①”所示
烧写可以使用仿真器 串口等多种方式 此处不再赘述
![串口下载程序](figures/image-tool_v2.2.0.png)
### 3.1 运行结果
boot选择工程提供的 `boot_all.bin`, OTA1 选择生成的 image2_all_ota1.bin 文件（通常在工程目录下），并且注意在这两个选项前面打勾确认，其他默认即可，如下载工具图“②”。
如果编译 & 烧写无误，会在专用日志串口*上看到RT-Thread的启动logo信息：
（c）下载程序
按下 Download（如下载工具图 “③”），即可开始下载程序，并且可以从日志窗口查看到下载信息。
## 9 运行
下载程序后，连接串口（默认使用板子上 `micro usb`），打开串口工具，配置串口波特率 115200，数据位 8 位，停止位 1 位，无校验，无流控；短按 `RST` 键复位，串口将输出调试信息，如下所示：
```bash
\ | /
- RT - Thread Operating System
/ | \ 3.0.4 build May 15 2018
/ | \ 3.1.1 build Oct 25 2018
2006 - 2018 Copyright by rt-thread team
msh />
lwIP-2.0.2 initialized!
Initializing WIFI ...
LDO Mode, BD_Info: 0
LDO Mode, BD_Info: 0
WIFI initialized
[I/WIFI] amebaz_wifi_start success
build time: Oct 25 2018 10:52:02
Hello RT-Thread!
[I/WLAN.dev] wlan init success
[I/WLAN.lwip] eth device init ok name:w0
msh >
```
## 10 WIFI简单使用
### wifi扫描命令
wifi 扫描命令格式如下
```bash
wifi scan
```
命令说明
| 字段 | 描述 |
| ---- | ------------------------ |
| wifi | 有关wifi命令都以wifi开头 |
| scan | wifi执行扫描动作 |
在调试工具中输入该命令，即可进行 wifi 命令扫描，调试信息如下
```bash
scan ap down
SSID MAC security rssi chn Mbps
------------------------------- ----------------- -------------- ---- --- ----
NEO-shanghai-ap2 58:66:ba:a1:ee:71 WPA2_TKIP_PSK -74 11 0
WQ1 88:25:93:94:51:54 WPA2_AES_PSK -76 13 0
shyc1 a0:40:a0:a3:e8:c9 WPA2_AES_PSK -77 13 0
KVIP 70:65:82:3b:71:43 WPA2_AES_PSK -83 11 0
YST2016 88:25:93:c6:67:d1 WPA2_TKIP_PSK -84 4 0
```
*默认串口
> 注：wifi 有关的命令，均以wifi开头。
### wifi 接入
## 4. 驱动支持情况及计划
接入 wifi 之前，先介绍一下其接入的命令 ，如下
```bash
wifi join ssid 123456789
```
命令说明
| 字段 | 描述 |
| --------- | ---------------------------------- |
| wifi | 有关wifi命令都以wifi开头 |
| join | wifi执行连接动作 |
| ssid | 热点的名字 |
| 123456789 | 热点的密码，没有密码可不输入这一项 |
了解上述命令，并且成功完成前面步骤，在串口中输入 `wifi w0 join realthread_VIP 123456789` ，如下日志表示连接成功
```bash
WIFI wlan0 Setting:
==============================
MODE => STATION
SSID => realthread_VIP
CHANNEL => 6
SECURITY => AES
PASSWORD => 123456789
[I/WLAN.mgnt] wifi connect success ssid:realthread_VIP
```
另外，提供一个简单的测试使用命令，查询设备IP地址命令：ifconfig。
```bash
network interface: w0 (Default)
MTU: 1500
MAC: 00 e0 4c d5 ac 46
FLAGS: UP LINK_UP ETHARP BROADCAST
ip address: 172.16.200.110
gw address: 172.16.200.1
net mask : 255.255.255.0
dns server #0: 172.16.200.1
dns server #1: 223.5.5.5
```
## 驱动支持情况及计划
| 驱动 | 支持情况 | 备注 |
| ---------- | :------: | :--------------------------: |
| UART | 支持 | UART0 |
| UART | 支持 | UART0 |
| WLAN | 部分支持 | 仅支持STA模式 |
## 5. 联系人信息
## 联系人信息
维护人:
[flyingcys][4] < [flyingcys@163.com][5] >
......
bsp/amebaz/applications/main.c
浏览文件 @ d23a65d5
......@@ -15,19 +15,12 @@
#include <rthw.h>
#include <rtthread.h>
/**
* @addtogroup ameba
*/
/*@{*/
#include <rtdevice.h>
int main(void)
{
rt_kprintf("build time: %s %s\n", __DATE__, __TIME__);
rt_kprintf("Hello RT-Thread!\n");
rt_wlan_set_mode(RT_WLAN_DEVICE_STA_NAME, RT_WLAN_STATION);
return 0;
}
/*@}*/
bsp/amebaz/applications/smartconfig_app.c 0 → 100644
浏览文件 @ d23a65d5
/*
* File : smartconfig_demo.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2018-09-13 Bernard the first version
*/
#include <rtthread.h>
#include <rtdevice.h>
#ifdef RT_USING_SMARTCONFIG_LIB
#include <sys/socket.h>
#include "smartconfig.h"
#define NET_READY_TIME_OUT (rt_tick_from_millisecond(30 * 1000))
static int rt_wlan_device_connetct(char *ssid, char *passwd)
{
int result = RT_EOK;
rt_uint8_t time_cnt = 0;
result = rt_wlan_connect(ssid, passwd);
if (result != RT_EOK)
{
rt_kprintf("\nconnect ssid %s error:%d!\n", ssid, result);
return result;
};
do
{
rt_thread_mdelay(1000);
time_cnt ++;
if (rt_wlan_is_ready())
{
break;
}
}
while (time_cnt <= (NET_READY_TIME_OUT / 1000));
if (time_cnt <= (NET_READY_TIME_OUT / 1000))
{
rt_kprintf("networking ready!\n");
}
else
{
rt_kprintf("wait ip got timeout!\n");
result = -RT_ETIMEOUT;
}
return result;
}
static void airkiss_send_notification(uint8_t random)
{
int sock = -1;
int udpbufsize = 2;
struct sockaddr_in UDPBCAddr, UDPBCServerAddr;
sock = socket(AF_INET, SOCK_DGRAM, 0);
if (sock < 0)
{
rt_kprintf("notify create socket error!\n");
goto _exit;
}
UDPBCAddr.sin_family = AF_INET;
UDPBCAddr.sin_port = htons(10000);
UDPBCAddr.sin_addr.s_addr = htonl(0xffffffff);
rt_memset(&(UDPBCAddr.sin_zero), 0, sizeof(UDPBCAddr.sin_zero));
UDPBCServerAddr.sin_family = AF_INET;
UDPBCServerAddr.sin_port = htons(10000);
UDPBCServerAddr.sin_addr.s_addr = htonl(INADDR_ANY);
rt_memset(&(UDPBCServerAddr.sin_zero), 0, sizeof(UDPBCServerAddr.sin_zero));
if (setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &udpbufsize, sizeof(int)) != 0)
{
rt_kprintf("notify socket setsockopt error\n");
goto _exit;
}
if (bind(sock, (struct sockaddr *)&UDPBCServerAddr, sizeof(UDPBCServerAddr)) != 0)
{
rt_kprintf("notify socket bind error\n");
goto _exit;
}
for (int i = 0; i <= 20; i++)
{
int ret = sendto(sock, (char *)&random, 1, 0, (struct sockaddr *)&UDPBCAddr, sizeof(UDPBCAddr));
rt_thread_delay(10);
}
rt_kprintf("airkiss notification thread exit!\n");
_exit:
if (sock >= 0)
{
closesocket(sock);
}
}
static int smartconfig_result(rt_smartconfig_type result_type, char *ssid, char *passwd, void *userdata, rt_uint8_t userdata_len)
{
rt_uint8_t random = *(rt_uint8_t *)userdata;
rt_kprintf("type:%d\n", result_type);
rt_kprintf("ssid:%s\n", ssid);
rt_kprintf("passwd:%s\n", passwd);
rt_kprintf("user_data:0x%02x\n", random);
if (rt_wlan_device_connetct(ssid, passwd) == RT_EOK)
{
airkiss_send_notification(random);
}
return 0;
}
void smartconfig_demo(void)
{
rt_smartconfig_start(SMARTCONFIG_TYPE_AIRKISS, SMARTCONFIG_ENCRYPT_NONE, RT_NULL, smartconfig_result);
}
#ifdef RT_USING_FINSH
#include "finsh.h"
MSH_CMD_EXPORT(smartconfig_demo, smartconfig demo);
#endif
#endif
bsp/amebaz/drivers/Kconfig 0 → 100644
浏览文件 @ d23a65d5
config BSP_USING_UART0
bool "Using UART0"
select RT_USING_SERIAL
default y
config BSP_USING_WIFI
bool "Using WIFI"
select RT_USING_WIFI
default y
bsp/amebaz/drivers/SConscript
浏览文件 @ d23a65d5
......@@ -5,14 +5,9 @@ list = os.listdir(cwd)
objs = []
src = Split('''
board.c
drv_uart.c
''')
if GetDepend(['RT_USING_LWIP']):
src += Split('''
drv_wifi.c
''')
board.c
drv_uart.c
''')
CPPPATH = [cwd]
......
bsp/amebaz/drivers/board.c
浏览文件 @ d23a65d5
......@@ -12,10 +12,8 @@
* 2009-01-05 Bernard first implementation
* 2018-03-15 flyingcys add amebaz
*/
#include <rtl8710b.h>
#include <stdint.h>
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
#include "drv_uart.h"
......@@ -87,7 +85,7 @@ void rt_hw_board_init(void)
{
extern uint32_t SystemCoreClock;
SysTick_Config(SystemCoreClock/RT_TICK_PER_SECOND);
#ifdef RT_USING_HEAP
rt_system_heap_init((void*)HEAP_BEGIN, (void*)HEAP_END);
#endif
......
bsp/amebaz/drivers/board.h
浏览文件 @ d23a65d5
......@@ -17,7 +17,17 @@
#ifndef __BOARD_H__
#define __BOARD_H__
#include "rtl8710b.h"
#ifdef _LITTLE_ENDIAN
#undef _LITTLE_ENDIAN
#endif
#ifdef SECTION
#undef SECTION
#endif
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
void rt_hw_board_init(void);
......
bsp/amebaz/drivers/drv_uart.c
浏览文件 @ d23a65d5
......@@ -22,11 +22,8 @@
* 2017-05-30 Bernard the first version
* 2018-03-15 flyingcys add amebaz
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include <rtl8710b.h>
#include <serial_api.h>
#include "board.h"
#include "drv_uart.h"
......@@ -37,7 +34,9 @@ struct device_uart
rt_uint32_t irqno;
};
#ifdef RT_USING_UART0
extern int LOGUART_SetBaud(u32 BaudRate);
#ifdef BSP_USING_UART0
static struct rt_serial_device serial0;
static struct device_uart uart0;
#endif
......@@ -64,7 +63,6 @@ const struct rt_uart_ops _uart_ops =
*/
static rt_err_t ameba_uart_configure (struct rt_serial_device *serial, struct serial_configure *cfg)
{
rt_uint32_t baud_div;
struct device_uart * uart;
RT_ASSERT(serial != RT_NULL);
......@@ -230,16 +228,16 @@ int rt_hw_uart_init(void)
struct rt_serial_device *serial;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef RT_USING_UART0
#ifdef BSP_USING_UART0
{
struct device_uart *uart;
serial = &serial0;
uart = &uart0;
/* Init UART Hardware */
serial_init(&uart->serial, UART_TX, UART_RX);
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = 115200;
......
bsp/amebaz/drivers/drv_uart.h
浏览文件 @ d23a65d5
......@@ -26,9 +26,6 @@
#ifndef __DRV_UART_H__
#define __DRV_UART_H__
#include "ameba_soc.h"
#include "serial_api.h"
#if defined(CONFIG_PLATFORM_8711B)
// 8710B
#define UART_TX PA_23
......
bsp/amebaz/drivers/drv_wifi.c 已删除 100644 → 0
浏览文件 @ 46608823
/*
* File : drv_wifi.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-5-30 Bernard the first version
* 2018-5-30 flyingcys add amebaz wifi driver
*/
#include <rtthread.h>
#include <wlan_dev.h>
#include <skbuff.h>
#include "amebaz_wlan.h"
//#define ETH_RX_DUMP
//#define ETH_TX_DUMP
//#define MINI_DUMP
struct sk_buff * rltk_wlan_get_recv_skb(int idx);
struct sk_buff * rltk_wlan_alloc_skb(unsigned int total_len);
#define MAX_ADDR_LEN 6
struct ameba_wifi
{
struct rt_wlan_device parent;
rt_uint8_t dev_addr[MAX_ADDR_LEN];
int idx;
int connected;
};
#ifdef RT_USING_WLAN_STA
static struct ameba_wifi wifi_sta;
#endif
#ifdef RT_USING_WLAN_AP
static struct ameba_wifi wifi_ap;
#endif
#if defined(ETH_RX_DUMP) || defined(ETH_TX_DUMP)
static void packet_dump(const char *msg, const struct pbuf *p)
{
const struct pbuf *q;
rt_uint32_t i, j;
rt_uint8_t *ptr;
rt_kprintf("%s %d byte\n", msg, p->tot_len);
#ifdef MINI_DUMP
return;
#endif
i = 0;
for (q = p; q != RT_NULL; q = q->next)
{
ptr = q->payload;
for (j = 0; j < q->len; j++)
{
if ((i % 8) == 0)
{
rt_kprintf(" ");
}
if ((i % 16) == 0)
{
rt_kprintf("\r\n");
}
rt_kprintf("%02x ", *ptr);
i++;
ptr++;
}
}
rt_kprintf("\n\n");
}
#endif /* dump */
#define netifapi_netif_set_link_up(n) netifapi_netif_common(n, netif_set_link_up, NULL)
#define netifapi_netif_set_link_down(n) netifapi_netif_common(n, netif_set_link_down, NULL)
void netif_set_connected(int connected)
{
wifi_sta.connected = connected;
if (connected)
{
netifapi_netif_set_link_up(wifi_sta.parent.parent.netif);
}
else
{
netifapi_netif_set_link_down(wifi_sta.parent.parent.netif);
}
}
void rltk_wlan_set_netif_info(int idx_wlan, void * dev, unsigned char * dev_addr)
{
struct ameba_wifi *wifi;
if(idx_wlan == 0)
wifi = &wifi_sta;
rtw_memcpy(wifi->dev_addr, dev_addr, 6);
rt_hw_wifi_init();
}
void netif_rx(int idx, unsigned int len)
{
struct ameba_wifi *wifi;
struct pbuf *p, *q;
int sg_len = 0;
struct sk_buff *skb = RT_NULL;
if(idx == 0)
wifi = &wifi_sta;
#if CONFIG_WLAN
if(!wifi->connected || !rltk_wlan_running(idx))
return;
#endif
skb = rltk_wlan_get_recv_skb(idx);
if(!skb)
{
rt_kprintf("netif_rx rltk_wlan_get_recv_skb NULL.\n");
return;
}
p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
if (p != RT_NULL)
{
pbuf_take(p, skb->data, len);
skb_pull(skb, len);
#ifdef ETH_RX_DUMP
packet_dump("RX dump", p);
#endif /* ETH_RX_DUMP */
if(wifi->parent.parent.netif->input(p, wifi->parent.parent.netif) != ERR_OK)
{
pbuf_free(p);
}
}
else
{
rt_kprintf("pbuf_alloc NULL for wifi RX.\n");
}
}
int netif_is_valid_IP(int idx, unsigned char *ip_dest)
{
struct netif * pnetif;
struct ip_addr addr = { 0 };
u32_t *ip_dest_addr = (u32_t*)ip_dest;
if(idx == 0)
pnetif = wifi_sta.parent.parent.netif;
addr.addr = *ip_dest_addr;
if(pnetif == RT_NULL)
return 0;
if(pnetif->ip_addr.addr == 0)
return 1;
if(ip_addr_ismulticast(&addr) || ip_addr_isbroadcast(&addr,pnetif))
{
return 1;
}
if(ip_addr_cmp(&(pnetif->ip_addr), &addr))
return 1;
return 0;
}
void netif_post_sleep_processing(void)
{
}
void netif_pre_sleep_processing(void)
{
}
unsigned char *rltk_wlan_get_ip(int idx)
{
struct ameba_wifi *wifi;
if(idx == 0)
wifi = &wifi_sta;
return (unsigned char *)&(wifi->parent.parent.netif->ip_addr);
}
struct netif *rltk_wlan_get_netif(int idx)
{
struct netif *netif;
if(idx == 0)
netif = wifi_sta.parent.parent.netif;
else if(idx == 1)
netif = wifi_ap.parent.parent.netif;
return netif;
}
rt_err_t rt_ameba_wifi_init(rt_device_t dev)
{
return RT_EOK;
}
rt_err_t rt_ameba_wifi_open(rt_device_t dev, rt_uint16_t oflag)
{
return RT_EOK;
}
rt_err_t rt_ameba_wifi_close(rt_device_t dev)
{
return RT_EOK;
}
rt_size_t rt_ameba_wifi_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
rt_size_t rt_ameba_wifi_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size)
{
rt_set_errno(-RT_ENOSYS);
return 0;
}
rt_err_t rt_ameba_wifi_control(rt_device_t dev, int cmd, void *args)
{
switch(cmd)
{
case NIOCTL_GADDR:
{
struct ameba_wifi *wifi = (struct ameba_wifi *)dev;
if(args)
memcpy(args, wifi->dev_addr, MAX_ADDR_LEN);
else
return -RT_ERROR;
}
break;
case WIFI_INIT:
{
rt_wlan_mode_t mode = *(rt_wlan_mode_t *)args;
rt_kprintf("mode:%d\n", mode);
}
break;
case WIFI_SCAN:
{
struct rt_wlan_scan_result *dst = RT_NULL;
dst = (struct rt_wlan_scan_result *)rt_malloc(sizeof(struct rt_wlan_scan_result));
if(dst == RT_NULL)
{
rt_kprintf("rt_malloc for scan result failed!\n");
return -RT_ENOMEM;
}
memset(dst, 0, sizeof(struct rt_wlan_scan_result));
if(amebaz_wifi_scan(dst) != RT_EOK)
{
rt_kprintf("amebaz_wifi_scan failed...\n");
return -RT_ERROR;
}
*(struct rt_wlan_scan_result **)args = dst;
}
break;
case WIFI_JOIN:
break;
case WIFI_EASYJOIN:
{
struct rt_wlan_device *wlan = (struct rt_wlan_device *)dev;
if(amebaz_wifi_connect(wlan->info->ssid, (char *)args) != RT_EOK)
{
rt_kprintf("amebaz_wifi_connect failed...\n");
return -RT_ERROR;
}
}
break;
case WIFI_SOFTAP:
{
struct rt_wlan_device *wlan = (struct rt_wlan_device *)dev;
if(amebaz_wifi_ap_start(wlan->info->ssid, (char *)args, wlan->info->channel) != RT_EOK)
{
rt_kprintf("amebaz_wifi_ap_start failed...\n");
return -RT_ERROR;
}
}
break;
case WIFI_DISCONNECT:
if(amebaz_wifi_disconnect() != RT_EOK)
{
rt_kprintf("amebaz_wifi_disconnect failed...\n");
return -RT_ERROR;
}
break;
case WIFI_GET_RSSI:
{
int *rssi = (int *)args;
*rssi = amebaz_wifi_get_rssi();
}
break;
case WIFI_ENTER_POWERSAVE:
break;
case WIFI_CFG_MONITOR:
break;
case WIFI_SET_CHANNEL:
{
int channel = *(int *)args;
amebaz_wifi_set_channel(channel);
}
break;
case WIFI_GET_CHANNEL:
{
int *channel = (int *)args;
*channel = amebaz_wifi_get_channel();
}
break;
case WIFI_SET_MONITOR_CALLBACK:
break;
}
return RT_EOK;
}
rt_err_t rt_ameba_wifi_tx(rt_device_t dev, struct pbuf* p)
{
rt_err_t result = RT_EOK;
struct ameba_wifi *wifi = (struct ameba_wifi *)dev;
int idx;
rt_base_t level;
struct sk_buff *skb = RT_NULL;
idx = wifi->idx;
level = rt_hw_interrupt_disable();
if(wifi->connected && rltk_wlan_check_isup(idx))
rltk_wlan_tx_inc(idx);
else
{
rt_hw_interrupt_enable(level);
// rt_kprintf("is not: connected && rltk_wlan_check_isup(idx)\n");
result = -RT_ERROR;
goto _exit;
}
rt_hw_interrupt_enable(level);
#ifdef ETH_TX_DUMP
packet_dump("TX dump", p);
#endif /* ETH_TX_DUMP */
skb = rltk_wlan_alloc_skb(p->tot_len);
if(skb != RT_NULL)
{
/* copy pbuf to a whole ETH frame */
pbuf_copy_partial(p, skb->tail, p->tot_len, 0);
skb_put(skb, p->tot_len);
rltk_wlan_send_skb(idx, skb);
}
else
{
rt_kprintf("rltk_wlan_alloc_skb NULL for WIFI TX.\n");
result = -RT_ENOMEM;
}
_exit:
level = rt_hw_interrupt_disable();
rltk_wlan_tx_dec(idx);
rt_hw_interrupt_enable(level);
return result;
}
int rt_hw_wifi_init(void)
{
rt_kprintf("%s %d\n", __FUNCTION__, __LINE__);
#ifdef RT_USING_WLAN_STA
wifi_sta.parent.parent.parent.init = rt_ameba_wifi_init;
wifi_sta.parent.parent.parent.open = rt_ameba_wifi_open;
wifi_sta.parent.parent.parent.close = rt_ameba_wifi_close;
wifi_sta.parent.parent.parent.read = rt_ameba_wifi_read;
wifi_sta.parent.parent.parent.write = rt_ameba_wifi_write;
wifi_sta.parent.parent.parent.control = rt_ameba_wifi_control;
wifi_sta.parent.parent.parent.user_data = RT_NULL;
//
wifi_sta.idx = 0;
//
wifi_sta.parent.parent.eth_rx = RT_NULL;
wifi_sta.parent.parent.eth_tx = rt_ameba_wifi_tx;
/* register wifi device */
eth_device_init(&wifi_sta.parent.parent, WIFI_DEVICE_STA_NAME);
#endif
#ifdef RT_USING_WLAN_AP
#endif
return RT_EOK;
}
bsp/amebaz/drivers/wlan/SConscript
浏览文件 @ d23a65d5
......@@ -6,10 +6,11 @@ CPPPATH = [cwd, str(Dir('#'))]
src = []
if GetDepend(['RT_USING_LWIP']):
src += Split('''
amebaz_wlan.c
''')
src += Split('''
drv_wifi.c
drv_wlan.c
''')
group = DefineGroup('amebaz_wlan', src, depend = [''], CPPPATH = CPPPATH)
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/amebaz/drivers/wlan/amebaz_wlan.c 已删除 100644 → 0
浏览文件 @ 46608823
/*
* File : amebaz_wlan.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2017-5-30 Bernard the first version
* 2018-6-12 flyingcys add amebaz wlan interface
*/
#include <rtthread.h>
#include <netif/ethernetif.h>
#include "wifi_structures.h"
#include "wifi_constants.h"
#include <wifi/wifi_util.h>
#include <wifi/wifi_conf.h>
#define PASSWD_LEN 65
#define SCAN_WAIT_TIME 10000
typedef enum
{
WIFI_NONE,
WIFI_STATION,
WIFI_AP,
} rt_wlan_mode_t;
struct rt_wlan_info
{
rt_wlan_mode_t mode; /* wifi mode */
rtw_security_t security;
char *ssid;
uint8_t bssid[6];
/* maximal data rate */
uint32_t datarate;
/* radio channel */
uint16_t channel;
/* signal strength */
int16_t rssi;
};
typedef struct rt_wlan_scan_result
{
char ap_num;
struct rt_wlan_info *ap_table;
} rt_wlan_scan_result_t;
static rtw_network_info_t wifi_info = {0};
static rtw_ap_info_t ap_info = {0};
static unsigned char wifi_password[65] = {0};
static unsigned char ap_password[PASSWD_LEN] = {0};
static rt_sem_t scan_done_sem = RT_NULL;
static char *scan_buf = RT_NULL;
static int ApNum = 0;
extern struct netif *rltk_wlan_get_netif(int idx);
static void LwIP_ReleaseIP(uint8_t idx)
{
struct ip_addr ipaddr;
struct ip_addr netmask;
struct ip_addr gw;
struct netif *pnetif = rltk_wlan_get_netif(idx);
IP4_ADDR(&ipaddr, 0, 0, 0, 0);
IP4_ADDR(&netmask, 255, 255, 255, 0);
IP4_ADDR(&gw, 0, 0, 0, 0);
netif_set_addr(pnetif, &ipaddr , &netmask, &gw);
}
static rtw_result_t amebaz_scan_result_handler( rtw_scan_handler_result_t* malloced_scan_result )
{
if (malloced_scan_result->scan_complete != RTW_TRUE) {
rtw_scan_result_t* record = &malloced_scan_result->ap_details;
record->SSID.val[record->SSID.len] = 0; /* Ensure the SSID is null terminated */
++ ApNum;
if(malloced_scan_result->user_data)
memcpy((void *)((char *)malloced_scan_result->user_data+(ApNum-1)*sizeof(rtw_scan_result_t)), (char *)record, sizeof(rtw_scan_result_t));
}
else
{
rt_kprintf("ap num:%d\n", ApNum);
if(scan_done_sem)
{
rt_sem_release(scan_done_sem);
}
}
return RTW_SUCCESS;
}
static int amebaz_wifi_do_scan(void)
{
int ret = RTW_SUCCESS;
rt_kprintf("wifi scan start...\n");
scan_buf = malloc(65*sizeof(rtw_scan_result_t));
if(scan_buf == NULL){
ret = RTW_BUFFER_UNAVAILABLE_TEMPORARY;
return -RT_ENOMEM;
}
memset(scan_buf, 0, 65 * sizeof(rtw_scan_result_t));
if((ret = wifi_scan_networks(amebaz_scan_result_handler, scan_buf)) != RTW_SUCCESS){
rt_kprintf("ERROR: wifi scan failed\n\r");
return -RT_ERROR;
}
return RT_EOK;
}
int amebaz_wifi_scan(struct rt_wlan_scan_result *dst)
{
rt_uint32_t i;
rt_uint32_t j = 0;
scan_done_sem = rt_sem_create("scandone", 0, RT_IPC_FLAG_FIFO);
if(scan_done_sem == RT_NULL)
return -RT_ENOMEM;
if(amebaz_wifi_do_scan() != RT_EOK)
{
rt_kprintf("amebaz_wifi_do_scan failed...\n");
return -RT_ERROR;
}
if(rt_sem_take(scan_done_sem, rt_tick_from_millisecond(SCAN_WAIT_TIME)) != RT_EOK)
{
rt_kprintf("scan wait timeout...\n");
return -RT_ETIMEOUT;
}
if(scan_done_sem)
{
rt_sem_delete(scan_done_sem);
scan_done_sem = RT_NULL;
}
rtw_scan_result_t *ptr = (rtw_scan_result_t *)scan_buf;
dst->ap_num = ApNum;
ApNum = 0;
dst->ap_table = (struct rt_wlan_info *)rt_malloc(sizeof(struct rt_wlan_info) * dst->ap_num);
if(dst->ap_table == RT_NULL)
{
rt_kprintf("rt_malloc for ap table failed...\n");
goto __exit;
}
for(i = 0; i < dst->ap_num; i ++)
{
dst->ap_table[i].mode = 1;
dst->ap_table[i].security = ptr->security;
dst->ap_table[i].ssid = (char *)rt_malloc(33);
if(dst->ap_table[i].ssid == RT_NULL)
{
rt_kprintf("rt_malloc for ssid Failed! times:%d,total:%d\n",i,ApNum);
j = i;
goto __exit;
}
memset(dst->ap_table[i].ssid, 0, 33);
memcpy(dst->ap_table[i].ssid, ptr->SSID.val, ptr->SSID.len);
memcpy(dst->ap_table[i].bssid, ptr->BSSID.octet, 6);
dst->ap_table[i].datarate = 0;
dst->ap_table[i].channel = ptr->channel;
dst->ap_table[i].rssi = ptr->signal_strength;
ptr ++;
}
if(scan_buf != RT_NULL)
{
rt_free(scan_buf);
scan_buf = RT_NULL;
}
return RT_EOK;
__exit:
if(scan_buf != RT_NULL)
{
rt_free(scan_buf);
scan_buf = RT_NULL;
}
if(dst->ap_table)
{
for(i = 0; i < j; i ++)
rt_free(dst->ap_table[i].ssid);
rt_free(dst->ap_table);
dst->ap_table = RT_NULL;
dst->ap_num = 0;
}
return -RT_ERROR;
}
void amebaz_wifi_info_init(void)
{
memset(wifi_info.ssid.val, 0, sizeof(wifi_info.ssid.val));
memset(wifi_info.bssid.octet, 0, 6);
memset(wifi_password, 0, sizeof(wifi_password));
wifi_info.ssid.len = 0;
wifi_info.password = NULL;
wifi_info.password_len = 0;
wifi_info.key_id = -1;
memset(ap_info.ssid.val, 0, sizeof(ap_info.ssid.val));
ap_info.ssid.len = 0;
ap_info.security_type = RTW_SECURITY_UNKNOWN;
ap_info.password = NULL;
ap_info.password_len = 0;
ap_info.channel = 1;
}
static int amebaz_wifi_set_sta_info(char *ssid, char *passwd)
{
if(ssid == RT_NULL || strlen(ssid) > 32)
{
rt_kprintf("Invalid argument...\n");
return -RT_EINVAL;
}
strcpy(wifi_info.ssid.val, ssid);
wifi_info.ssid.len = strlen(ssid);
if(passwd != NULL)
{
if(strlen(passwd) > 64)
{
rt_kprintf("Invalid argument...\n");
return -RT_EINVAL;
}
strcpy(wifi_password, passwd);
wifi_info.password = wifi_password;
wifi_info.password_len = strlen(passwd);
}
else
wifi_info.password = RT_NULL;
return RT_EOK;
}
static int amebaz_wifi_set_ap_info(char *ssid, char *passwd, int channel)
{
if(ssid == RT_NULL || strlen(ssid) > 32)
{
rt_kprintf("Invalid argument...\n");
return -RT_EINVAL;
}
strcpy(ap_info.ssid.val, ssid);
ap_info.ssid.len = strlen(ssid);
if(passwd != NULL)
{
if(strlen(passwd) > 64)
{
rt_kprintf("Invalid argument...\n");
return -RT_EINVAL;
}
strcpy(ap_password, passwd);
ap_info.password = ap_password;
ap_info.password_len = strlen(passwd);
}
else
ap_info.password = RT_NULL;
ap_info.channel = channel;
return RT_EOK;
}
static int amebaz_wifi_do_connect(void)
{
int mode, ret;
char empty_bssid[6] = {0};
char assoc_by_bssid = 0;
rt_kprintf("amebaz wifi do connect start...\n");
if(memcmp (wifi_info.bssid.octet, empty_bssid, 6))
{
assoc_by_bssid = 1;
}
else if(wifi_info.ssid.val[0] == 0)
{
ret = RTW_BADARG;
return -RT_ERROR;
}
if(wifi_info.password != RT_NULL)
{
if((wifi_info.key_id >= 0) && (wifi_info.key_id <= 3))
{
wifi_info.security_type = RTW_SECURITY_WEP_PSK;
}
else
{
wifi_info.security_type = RTW_SECURITY_WPA2_AES_PSK;
}
}
else
{
wifi_info.security_type = RTW_SECURITY_OPEN;
}
//Check if in AP mode
wext_get_mode(WLAN0_NAME, &mode);
if(mode == IW_MODE_MASTER)
{
#if 0
#if CONFIG_LWIP_LAYER
dhcps_deinit();
#endif
wifi_off();
vTaskDelay(20);
if (wifi_on(RTW_MODE_STA) < 0){
printf("\n\rERROR: Wifi on failed!");
ret = RTW_ERROR;
goto EXIT;
}
#endif
}
if(assoc_by_bssid)
{
rt_kprintf("Joining BSS by BSSID \"MAC_FMT\" ...\n", MAC_ARG(wifi_info.bssid.octet));
ret = wifi_connect_bssid(wifi_info.bssid.octet, (char*)wifi_info.ssid.val, wifi_info.security_type, (char*)wifi_info.password,
ETH_ALEN, wifi_info.ssid.len, wifi_info.password_len, wifi_info.key_id, NULL);
}
else
{
rt_kprintf("\n\rJoining BSS by SSID %s...\n\r", (char*)wifi_info.ssid.val);
ret = wifi_connect((char*)wifi_info.ssid.val, wifi_info.security_type,
(char*)wifi_info.password, wifi_info.ssid.len,
wifi_info.password_len, wifi_info.key_id, NULL);
}
if(ret!= RTW_SUCCESS)
{
if(ret == RTW_INVALID_KEY)
rt_kprintf("ERROR:Invalid Key\n");
rt_kprintf("ERROR: Can't connect to AP\n");
return -RT_ERROR;
}
rt_kprintf("now start dhcp...\n");
netif_set_connected(1);
dhcp_start(netif_default);
rt_kprintf("dhcp success...\n");
return RT_EOK;
}
int amebaz_wifi_connect(char *ssid, char *passwd)
{
int ret;
ret = amebaz_wifi_set_sta_info(ssid, passwd);
if(ret != RT_EOK)
{
amebaz_wifi_info_init();
return ret;
}
if(amebaz_wifi_do_connect() != RT_EOK)
{
amebaz_wifi_info_init();
rt_kprintf("amebaz_wifi_do_connect failed...\n");
return -RT_ERROR;
}
amebaz_wifi_info_init();
return RT_EOK;
}
static int amebaz_wifi_do_disconnect(void)
{
int timeout = 20;
char essid[33];
int ret = RTW_SUCCESS;
if(wext_get_ssid(WLAN0_NAME, (unsigned char *) essid) < 0)
{
rt_kprintf("\nWIFI disconnected!\n");
return -RT_ERROR;
}
if((ret = wifi_disconnect()) < 0)
{
return -RT_ERROR;
}
while(1)
{
if(wext_get_ssid(WLAN0_NAME, (unsigned char *) essid) < 0)
{
rt_kprintf("\nWIFI disconnected!\n");
break;
}
if(timeout == 0)
{
rt_kprintf("ERROR: Deassoc timeout!\n\r");
ret = RTW_TIMEOUT;
break;
}
vTaskDelay(10);
timeout --;
}
LwIP_ReleaseIP(WLAN0_IDX);
if(ret != RTW_SUCCESS)
return -RT_ERROR;
rt_kprintf("amebaz wifi do disconnect success...\n");
return RT_EOK;
}
int amebaz_wifi_disconnect(void)
{
int ret = RT_EOK;
ret = amebaz_wifi_do_disconnect();
if(ret != RT_EOK)
rt_kprintf("amebaz_wifi_do_disconnect failed...\n");
amebaz_wifi_info_init();
return ret;
}
static int amebaz_wifi_do_ap_start(void)
{
struct ip_addr ipaddr;
struct ip_addr netmask;
struct ip_addr gw;
struct netif *pnetif = rltk_wlan_get_netif(1);
int timeout = 20;
int ret = RTW_SUCCESS;
if(ap_info.ssid.val[0] == 0){
rt_kprintf("ERROR: SSID can't be empty\n\r");
return -RT_ERROR;
}
if(ap_info.password == NULL)
{
ap_info.security_type = RTW_SECURITY_OPEN;
}
else
{
if(ap_info.password_len <= RTW_MAX_PSK_LEN && ap_info.password_len >= RTW_MIN_PSK_LEN)
{
ap_info.security_type = RTW_SECURITY_WPA2_AES_PSK;
}
else
{
rt_kprintf("ERROR: password length is between 8 to 64 \n");
return -RT_ERROR;
}
}
//#if CONFIG_LWIP_LAYER
// dhcps_deinit();
// IP4_ADDR(&ipaddr, GW_ADDR0, GW_ADDR1, GW_ADDR2, GW_ADDR3);
// IP4_ADDR(&netmask, NETMASK_ADDR0, NETMASK_ADDR1 , NETMASK_ADDR2, NETMASK_ADDR3);
// IP4_ADDR(&gw, GW_ADDR0, GW_ADDR1, GW_ADDR2, GW_ADDR3);
// netif_set_addr(pnetif, &ipaddr, &netmask,&gw);
//#ifdef CONFIG_DONT_CARE_TP
// pnetif->flags |= NETIF_FLAG_IPSWITCH;
//#endif
//#endif
wifi_off();
vTaskDelay(20);
if (wifi_on(RTW_MODE_AP) < 0)
{
rt_kprintf("ERROR: Wifi on failed!\n");
return -RT_ERROR;
}
rt_kprintf("Now start AP mode...\n");
if((ret = wifi_start_ap((char*)ap_info.ssid.val, ap_info.security_type, (char*)ap_info.password, ap_info.ssid.len, ap_info.password_len, ap_info.channel) ) < 0)
{
rt_kprintf("ERROR: Operation failed!");
return -RT_ERROR;
}
while(1)
{
char essid[33];
if(wext_get_ssid(WLAN0_NAME, (unsigned char *) essid) > 0)
{
if(strcmp((const char *) essid, (const char *)ap_info.ssid.val) == 0)
{
rt_kprintf("AP %s started...\n", ap_info.ssid.val);
ret = RTW_SUCCESS;
break;
}
}
if(timeout == 0)
{
rt_kprintf("ERROR: Start AP timeout!");
ret = RTW_TIMEOUT;
break;
}
vTaskDelay(10);
timeout --;
}
if(ret != RTW_SUCCESS)
return -RT_ERROR;
//#if CONFIG_LWIP_LAYER
//LwIP_UseStaticIP(pnetif);
// dhcps_init(pnetif);
//#endif
return RT_EOK;
}
static int amebaz_wifi_do_ap_stop(void)
{
return RT_EOK;
}
int amebaz_wifi_ap_start(char *ssid, char *passwd, int channel)
{
int ret;
ret = amebaz_wifi_set_ap_info(ssid, passwd, channel);
if(ret != RT_EOK)
{
amebaz_wifi_info_init();
return ret;
}
if(amebaz_wifi_do_ap_start() != RT_EOK)
{
amebaz_wifi_info_init();
rt_kprintf("amebaz_wifi_ap_start failed...\n");
return -RT_ERROR;
}
amebaz_wifi_info_init();
return RT_EOK;
}
int amebaz_wifi_ap_stop(void)
{
int ret;
if(amebaz_wifi_do_ap_stop() != RT_EOK)
{
amebaz_wifi_info_init();
rt_kprintf("amebaz_wifi_ap_stop failed...\n");
return -RT_ERROR;
}
amebaz_wifi_info_init();
return RT_EOK;
}
int amebaz_wifi_get_rssi(void)
{
int rssi = 0;
wifi_get_rssi(&rssi);
return rssi;
}
void amebaz_wifi_set_channel(int channel)
{
wifi_set_channel(channel);
}
int amebaz_wifi_get_channel(void)
{
int channel;
wifi_get_channel(&channel);
return channel;
}
int amebaz_wifi_init(rt_wlan_mode_t mode)
{
int ret;
rtw_mode_t rtw_mode;
if(mode == WIFI_STATION)
rtw_mode = RTW_MODE_STA;
else if(mode == WIFI_AP)
rtw_mode = RTW_MODE_AP;
if(wifi_on(mode) < 0)
return -RT_ERROR;
if(wifi_set_autoreconnect(1) < 0)
return -RT_ERROR;
return RT_EOK;
}
bsp/amebaz/drivers/wlan/drv_wifi.c 0 → 100644
浏览文件 @ d23a65d5
此差异已折叠。
bsp/amebaz/drivers/drv_wifi.h → bsp/amebaz/drivers/wlan/drv_wifi.h
浏览文件 @ d23a65d5
......@@ -25,7 +25,7 @@
#ifndef __DRV_WIFI_H__
#define __DRV_WIFI_H__
int rt_hw_wifi_init(void);
int rthw_wifi_low_init(void);
#endif /* __DRV_WIFI_H__ */
bsp/amebaz/drivers/wlan/drv_wlan.c 0 → 100644
浏览文件 @ d23a65d5
/*
* File : drv_wlan.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2018-7-10 tyx the first version
*/
#include "wifi_structures.h"
#include "wifi_constants.h"
#include <wifi/wifi_util.h>
#include <wifi/wifi_conf.h>
#include "board.h"
#include "drv_wlan.h"
// #define SCAN_WAIT_TIME (10000)
struct scan_user_data
{
struct rt_completion done;
scan_callback_fn fun;
void *data;
};
extern rthw_mode_t wifi_mode;
rthw_mode_t rthw_wifi_mode_get(void)
{
return wifi_mode;
}
int rthw_wifi_stop(void)
{
return wifi_off();
}
int rthw_wifi_start(rthw_mode_t mode)
{
if(wifi_on(mode) < 0)
{
rt_kprintf("ERROR: wifi_on failed\n");
return -1;
}
return 0;
}
int rthw_wifi_connect(char *ssid, int ssid_len, char *password, int pass_len, rthw_security_t security_type)
{
int mode;
rtw_wifi_setting_t setting;
mode = rthw_wifi_mode_get();
if ((mode != RTHW_MODE_STA) && (mode != RTHW_MODE_STA_AP))
{
return -1;
}
if(wext_get_mode(WLAN0_NAME, &mode) < 0)
{
rt_kprintf("L:%d wifi get mode err\n", __LINE__);
return -1;
}
if(wifi_connect(ssid, security_type, password, ssid_len, pass_len, -1, NULL) != RTW_SUCCESS)
{
rt_kprintf("wifi connect fail\n");
return -1;
}
rt_kprintf("wifi connect success\n");
rt_kprintf("Show Wi-Fi information\n");
wifi_get_setting(WLAN0_NAME,&setting);
wifi_show_setting(WLAN0_NAME,&setting);
return 0;
}
int rthw_wifi_connect_bssid(char *bssid, char *ssid, int ssid_len, char *password, int pass_len, rthw_security_t security_type)
{
int mode;
rtw_wifi_setting_t setting;
mode = rthw_wifi_mode_get();
if ((mode != RTHW_MODE_STA) && (mode != RTHW_MODE_STA_AP))
{
return -1;
}
if(wext_get_mode(WLAN0_NAME, &mode) < 0)
{
rt_kprintf("L:%d wifi get mode err\n", __LINE__);
return -1;
}
if(wifi_connect_bssid(bssid, ssid, security_type, password, 6, ssid_len, pass_len, -1, NULL) != RTW_SUCCESS)
{
rt_kprintf("wifi connect fail\n");
return -1;
}
rt_kprintf("wifi connect success\n");
rt_kprintf("Show Wi-Fi information\n");
wifi_get_setting(WLAN0_NAME,&setting);
wifi_show_setting(WLAN0_NAME,&setting);
return 0;
}
int rthw_wifi_ap_start(char *ssid, char *password, int channel)
{
int mode = 0, timeout = 20;
rtw_security_t security_type = RTW_SECURITY_WPA2_AES_PSK;
char *name = RT_NULL;
mode = rthw_wifi_mode_get();
if (mode == RTHW_MODE_AP)
{
name = WLAN0_NAME;
}
else if (mode == RTHW_MODE_STA_AP)
{
name = WLAN1_NAME;
}
else
{
return -1;
}
if(wext_get_mode(name, &mode) < 0)
{
rt_kprintf("L:%d wifi get mode err\n", __LINE__);
return -1;
}
if (password == RT_NULL)
{
security_type = RTW_SECURITY_OPEN;
}
if(wifi_start_ap(ssid, security_type, password, rt_strlen(ssid), rt_strlen(password), 6) != 0)
{
rt_kprintf("ERROR: wifi_start_ap failed\n");
return -1;
}
while(1)
{
char essid[33];
if(wext_get_ssid(name, (unsigned char *) essid) > 0)
{
if(strcmp((const char *) essid, (const char *)ssid) == 0)
{
rt_kprintf("%s started\n", ssid);
break;
}
}
if(timeout == 0)
{
rt_kprintf("Start AP timeout\n");
return -1;
}
rt_thread_delay(1 * RT_TICK_PER_SECOND);
timeout --;
}
return 0;
}
static int rthw_wifi_disconnect(char *name)
{
char essid[33];
int timeout = 20;
const rt_uint8_t null_bssid[ETH_ALEN + 2] = {0, 0, 0, 0, 0, 1, 0, 0};
if (name == RT_NULL)
return -1;
if (wext_get_ssid(name, (unsigned char *) essid) < 0)
{
rt_kprintf("\nWIFI disconnected!\n");
return -1;
}
if (wext_set_bssid(name, null_bssid) < 0)
{
rt_kprintf("Failed to set bogus BSSID to disconnect");
return -1;
}
while (1)
{
if(wext_get_ssid(name, (unsigned char *) essid) < 0)
{
rt_kprintf("WIFI disconnected!\n");
break;
}
if(timeout == 0)
{
rt_kprintf("ERROR: Deassoc timeout!\n");
return -1;
}
rt_thread_delay(10);
timeout --;
}
return 0;
}
int rthw_wifi_sta_disconnect(void)
{
int mode = 0;
char *name = RT_NULL;
mode = rthw_wifi_mode_get();
if (mode == RTHW_MODE_STA)
{
name = WLAN0_NAME;
}
else if (mode == RTHW_MODE_STA_AP)
{
name = WLAN0_NAME;
}
else
{
return -1;
}
return rthw_wifi_disconnect(name);
}
int rthw_wifi_ap_disconnect(void)
{
int mode = 0;
char *name = RT_NULL;
mode = rthw_wifi_mode_get();
if (mode == RTHW_MODE_AP)
{
name = WLAN0_NAME;
}
else if (mode == RTHW_MODE_STA_AP)
{
name = WLAN1_NAME;
}
else
{
return -1;
}
return rthw_wifi_disconnect(name);
}
int rthw_wifi_rssi_get(void)
{
int rssi = 0;
wifi_get_rssi(&rssi);
return rssi;
}
void rthw_wifi_channel_set(int channel)
{
wifi_set_channel(channel);
}
int rthw_wifi_channel_get(void)
{
int channel;
wifi_get_channel(&channel);
return channel;
}
static rtw_result_t rthw_wifi_scan_result_handler( rtw_scan_handler_result_t* malloced_scan_result)
{
struct scan_user_data* user_data = malloced_scan_result->user_data;
struct rthw_wlan_info info = { 0 };
if (malloced_scan_result->scan_complete != RTW_TRUE)
{
rtw_scan_result_t* record = &malloced_scan_result->ap_details;
if (user_data->fun != RT_NULL)
{
record->SSID.val[record->SSID.len] = 0; /* Ensure the SSID is null terminated */
info.ssid = record->SSID.val;
info.bssid = record->BSSID.octet;
info.band = record->band;
info.datarate = 0;
info.channel = record->channel;
info.rssi = record->signal_strength;
info.security = record->security;
user_data->fun(&info, user_data->data);
}
}
else
{
user_data->fun(RT_NULL, user_data->data);
rt_free(user_data);
rt_kprintf("scan ap down\n");
}
return RTW_SUCCESS;
}
int rthw_wifi_scan(scan_callback_fn fun, void *data)
{
struct scan_user_data *user_data;
if (fun == RT_NULL)
{
rt_kprintf("scan callback fun is null\n");
return -1;
}
user_data = rt_malloc(sizeof(struct scan_user_data));
if (user_data == RT_NULL)
{
rt_kprintf("wifi scan malloc fail\n");
return -1;
}
user_data->fun = fun;
user_data->data = data;
if (wifi_scan_networks(rthw_wifi_scan_result_handler, user_data) != RTW_SUCCESS)
{
rt_kprintf("ERROR: wifi scan failed\n\r");
return -1;
}
return 0;
}
static rthw_wlan_monitor_callback_t monitor_callback;
static void rthw_wifi_promisc_callback(unsigned char *buf, unsigned int len, void* userdata)
{
if (monitor_callback)
{
monitor_callback(userdata, len, RT_NULL);
}
}
void rthw_wifi_monitor_callback_set(rthw_wlan_monitor_callback_t callback)
{
monitor_callback = callback;
}
void rthw_wifi_monitor_enable(int enable)
{
if (enable)
{
wifi_enter_promisc_mode();
wifi_set_promisc(RTW_PROMISC_ENABLE, rthw_wifi_promisc_callback, 1);
rt_kprintf("%s run \n", __FUNCTION__);
}
else
{
wifi_set_promisc(RTW_PROMISC_DISABLE, RT_NULL, 0);
rthw_wifi_stop();
}
}
bsp/amebaz/drivers/wlan/drv_wlan.h 0 → 100644
浏览文件 @ d23a65d5
/*
* File : drv_wlan.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2018-7-10 tyx the first version
*/
#ifndef __DRV_WLAN_H__
#define __DRV_WLAN_H__
typedef enum
{
RTHW_MODE_NONE = 0,
RTHW_MODE_STA,
RTHW_MODE_AP,
RTHW_MODE_STA_AP,
RTHW_MODE_PROMISC,
RTHW_MODE_P2P
}rthw_mode_t;
#define SHARED_ENABLED 0x00008000
#define WPA_SECURITY 0x00200000
#define WPA2_SECURITY 0x00400000
#define WPS_ENABLED 0x10000000
#define WEP_ENABLED 0x0001
#define TKIP_ENABLED 0x0002
#define AES_ENABLED 0x0004
#define WSEC_SWFLAG 0x0008
typedef enum {
RTHW_SECURITY_OPEN = 0, /**< Open security */
RTHW_SECURITY_WEP_PSK = WEP_ENABLED, /**< WEP Security with open authentication */
RTHW_SECURITY_WEP_SHARED = ( WEP_ENABLED | SHARED_ENABLED ), /**< WEP Security with shared authentication */
RTHW_SECURITY_WPA_TKIP_PSK = ( WPA_SECURITY | TKIP_ENABLED ), /**< WPA Security with TKIP */
RTHW_SECURITY_WPA_AES_PSK = ( WPA_SECURITY | AES_ENABLED ), /**< WPA Security with AES */
RTHW_SECURITY_WPA2_AES_PSK = ( WPA2_SECURITY | AES_ENABLED ), /**< WPA2 Security with AES */
RTHW_SECURITY_WPA2_TKIP_PSK = ( WPA2_SECURITY | TKIP_ENABLED ), /**< WPA2 Security with TKIP */
RTHW_SECURITY_WPA2_MIXED_PSK = ( WPA2_SECURITY | AES_ENABLED | TKIP_ENABLED ), /**< WPA2 Security with AES & TKIP */
RTHW_SECURITY_WPA_WPA2_MIXED = ( WPA_SECURITY | WPA2_SECURITY ), /**< WPA/WPA2 Security */
RTHW_SECURITY_WPS_OPEN = WPS_ENABLED, /**< WPS with open security */
RTHW_SECURITY_WPS_SECURE = (WPS_ENABLED | AES_ENABLED), /**< WPS with AES security */
RTHW_SECURITY_UNKNOWN = -1, /**< May be returned by scan function if security is unknown. Do not pass this to the join function! */
RTHW_SECURITY_FORCE_32_BIT = 0x7fffffff /**< Exists only to force rtw_security_t type to 32 bits */
} rthw_security_t;
typedef enum {
RTHW_WIFI_EVENT_CONNECT = 0,
RTHW_WIFI_EVENT_DISCONNECT = 1,
RTHW_WIFI_EVENT_FOURWAY_HANDSHAKE_DONE = 2,
RTHW_WIFI_EVENT_SCAN_RESULT_REPORT = 3,
RTHW_WIFI_EVENT_SCAN_DONE = 4,
RTHW_WIFI_EVENT_RECONNECTION_FAIL = 5,
RTHW_WIFI_EVENT_SEND_ACTION_DONE = 6,
RTHW_WIFI_EVENT_RX_MGNT = 7,
RTHW_WIFI_EVENT_STA_ASSOC = 8,
RTHW_WIFI_EVENT_STA_DISASSOC = 9,
RTHW_WIFI_EVENT_STA_WPS_START = 10,
RTHW_WIFI_EVENT_WPS_FINISH = 11,
RTHW_WIFI_EVENT_EAPOL_START = 12,
RTHW_WIFI_EVENT_EAPOL_RECVD = 13,
RTHW_WIFI_EVENT_NO_NETWORK = 14,
RTHW_WIFI_EVENT_BEACON_AFTER_DHCP = 15,
RTHW_WIFI_EVENT_MAX,
}rthw_event_indicate_t;
typedef enum {
RTHW_802_11_BAND_5GHZ = 0, /**< Denotes 5GHz radio band */
RTHW_802_11_BAND_2_4GHZ = 1 /**< Denotes 2.4GHz radio band */
} rthw_802_11_band_t;
struct rthw_wlan_info
{
char *ssid;
rt_uint8_t *bssid;
rthw_802_11_band_t band;
rt_uint32_t datarate;
rt_uint16_t channel;
rt_int16_t rssi;
rthw_security_t security;
};
typedef void (*scan_callback_fn)(struct rthw_wlan_info *info, void *user_data);
typedef void (*rthw_wlan_monitor_callback_t)(rt_uint8_t *data, int len, void *user_data);
rthw_mode_t rthw_wifi_mode_get(void);
int rthw_wifi_stop(void);
int rthw_wifi_start(rthw_mode_t mode);
int rthw_wifi_connect(char *ssid, int ssid_len, char *password, int pass_len, rthw_security_t security_type);
int rthw_wifi_connect_bssid(char *bssid, char *ssid, int ssid_len, char *password, int pass_len, rthw_security_t security_type);
int rthw_wifi_ap_start(char *ssid, char *password, int channel);
int rthw_wifi_rssi_get(void);
void rthw_wifi_channel_set(int channel);
int rthw_wifi_channel_get(void);
int rthw_wifi_sta_disconnect(void);
int rthw_wifi_ap_disconnect(void);
int rthw_wifi_scan(scan_callback_fn fun, void *data);
void rthw_wifi_monitor_enable(int enable);
void rthw_wifi_monitor_callback_set(rthw_wlan_monitor_callback_t callback);
#endif
bsp/amebaz/libraries/Kconfig 0 → 100644
浏览文件 @ d23a65d5
menu "External Libraries"
config RT_USING_SMARTCONFIG_LIB
bool "Using RT-Thrad SmartConfig Library"
default n
endmenu
bsp/amebaz/libraries/SConscript 0 → 100644
浏览文件 @ d23a65d5
import os
from building import *
objs = []
cwd = GetCurrentDir()
list = os.listdir(cwd)
for item in list:
if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
objs = objs + SConscript(os.path.join(item, 'SConscript'))
Return('objs')
bsp/amebaz/libraries/smartconfig/SConscript 0 → 100644
浏览文件 @ d23a65d5
Import('rtconfig')
from building import *
cwd = GetCurrentDir()
src = []
path = [cwd + '/inc']
libs = ['']
libpath = [cwd + '/libs']
if rtconfig.CROSS_TOOL == 'gcc':
libs += ['libsmartconfig_armcm4_gcc']
elif rtconfig.CROSS_TOOL == 'iar':
libs += ['libsmartconfig_armcm4_iar']
group = DefineGroup('smartconfig', src, depend = ['RT_USING_SMARTCONFIG_LIB'], CPPPATH = path, LIBS = libs, LIBPATH = libpath)
Return('group')
bsp/amebaz/drivers/wlan/amebaz_wlan.h → bsp/amebaz/libraries/smartconfig/inc/smartconfig.h
浏览文件 @ d23a65d5
/*
* File : amebaz_wlan.h
* File : smartconfig.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2017, RT-Thread Development Team
* COPYRIGHT (C) 2006 - 2018, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -19,36 +19,44 @@
*
* Change Logs:
* Date Author Notes
* 2017-5-30 Bernard the first version
* 2018-6-12 flyingcys add amebaz wlan interface
* 2018-09-13 Bernard the first version
*/
#ifndef __AMEBAZ_WLAN_H__
#define __AMEBAZ_WLAN_H__
#ifndef __SMARTCONFIG_H__
#define __SMARTCONFIG_H__
int amebaz_wifi_scan();
#define SMARTCONFIG_EVENT_CHANGE_CHANNEL (1 << 0)
#define SMARTCONFIG_EVENT_LOCKED_CHANNEL (1 << 1)
#define SMARTCONFIG_EVENT_COMPLETE (1 << 2)
#define SMARTCONFIG_EVENT_RESTART (1 << 3)
#define SMARTCONFIG_EVENT_STOP (1 << 4)
void amebaz_wifi_info_init(void);
typedef enum
{
SMARTCONFIG_TYPE_AIRKISS = 0,
SMARTCONFIG_TYPE_JDSMART = 1,
SMARTCONFIG_TYPE_ESPTOUCH,
SMARTCONFIG_TYPE_REALTOUCH,
SMARTCONFIG_TYPE_ALL,
SMARTCONFIG_TYPE_MAX,
} rt_smartconfig_type;
int amebaz_wifi_set_sta_info(char *ssid, char *passwd);
typedef enum
{
SMARTCONFIG_ENCRYPT_NONE,
SMARTCONFIG_ENCRYPT_AES,
} rt_smartconfig_encrypt_type;
int amebaz_wifi_set_ap_info(char *ssid, char *passwd);
typedef int (*rt_smartconfig_result_cb)(rt_smartconfig_type result_type, char *ssid, char *passwd, \
void *userdata, rt_uint8_t userdata_len);
typedef void (*rt_smartconfig_event_handle)(rt_uint32_t event, void *userdata);
int amebaz_wifi_connect(char *ssid, char *passwd);
int rt_smartconfig_start(rt_smartconfig_type config_type, rt_smartconfig_encrypt_type encrypt_type, char *encrypt, \
rt_smartconfig_result_cb result_cb);
int amebaz_wifi_disconnect(void);
int rt_smartconfig_stop(void);
int amebaz_wifi_ap_start(char *ssid, char *passwd, int channel);
void rt_smartconfig_set_event_handle(rt_smartconfig_event_handle handle, void *userdata);
int amebaz_wifi_ap_stop(void);
int amebaz_wifi_get_rssi(void);
void amebaz_wifi_set_channel(int channel);
int amebaz_wifi_get_channel(void);
int amebaz_wifi_init(rt_wlan_mode_t mode);
#endif /* __AMEBAZ_WLAN_H__ */
char *rt_smartconfig_version(void);
#endif
bsp/amebaz/project.ewd 0 → 100644
浏览文件 @ d23a65d5
此差异已折叠。
bsp/amebaz/project.ewp
浏览文件 @ d23a65d5
此差异已折叠。
bsp/amebaz/project.ewt 已删除 100644 → 0
浏览文件 @ 46608823
此差异已折叠。
bsp/amebaz/rtconfig.h
浏览文件 @ d23a65d5
......@@ -11,15 +11,14 @@
#define RT_THREAD_PRIORITY_32
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 1000
#define RT_DEBUG
#define RT_USING_OVERFLOW_CHECK
#define RT_DEBUG_INIT 0
#define RT_DEBUG_THREAD 0
#define RT_USING_HOOK
#define RT_IDEL_HOOK_LIST_SIZE 4
#define IDLE_THREAD_STACK_SIZE 256
#define RT_USING_TIMER_SOFT
#define RT_TIMER_THREAD_PRIO 4
#define RT_TIMER_THREAD_STACK_SIZE 512
#define RT_TIMER_THREAD_STACK_SIZE 1024
#define RT_DEBUG
/* Inter-Thread communication */
......@@ -45,6 +44,9 @@
/* RT-Thread Components */
#define RT_USING_COMPONENTS_INIT
#define RT_USING_USER_MAIN
#define RT_MAIN_THREAD_STACK_SIZE 2048
#define RT_MAIN_THREAD_PRIORITY 10
/* C++ features */
......@@ -62,6 +64,7 @@
#define FINSH_CMD_SIZE 80
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
#define FINSH_USING_MSH_ONLY
#define FINSH_ARG_MAX 10
/* Device virtual file system */
......@@ -70,13 +73,27 @@
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_PIPE_BUFSZ 512
#define RT_USING_SERIAL
#define RT_USING_PIN
/* Using WiFi */
#define RT_USING_WIFI
#define RT_USING_WLAN_STA
#define RT_USING_WLAN_AP
#define WIFI_DEVICE_STA_NAME "w0"
#define WIFI_DEVICE_AP_NAME "ap"
#define RT_WLAN_DEVICE_STA_NAME "wlan0"
#define RT_WLAN_DEVICE_AP_NAME "wlan1"
#define RT_WLAN_DEFAULT_PROT "lwip"
#define RT_WLAN_SCAN_WAIT_MS 10000
#define RT_WLAN_CONNECT_WAIT_MS 10000
#define RT_WLAN_SSID_MAX_LENGTH 32
#define RT_WLAN_PASSWORD_MAX_LENGTH 32
#define RT_WLAN_SCAN_SORT
#define RT_WLAN_CFG_INFO_MAX 3
#define RT_WLAN_WORKQUEUE_THREAD_NAME "wlan_job"
#define RT_WLAN_WORKQUEUE_THREAD_SIZE 2048
#define RT_WLAN_WORKQUEUE_THREAD_PRIO 22
#define RT_WLAN_DEV_EVENT_NUM 2
#define RT_WLAN_DEBUG
#define RT_WLAN_CMD_DEBUG
/* Using USB */
......@@ -85,12 +102,15 @@
#define RT_USING_LIBC
/* Network stack */
/* Network */
/* Socket abstraction layer */
/* light weight TCP/IP stack */
#define RT_USING_LWIP
#define RT_USING_LWIP141
#define RT_USING_LWIP202
#define RT_LWIP_IGMP
#define RT_LWIP_ICMP
#define RT_LWIP_DNS
......@@ -129,6 +149,12 @@
/* Modbus master and slave stack */
/* AT commands */
#define LWIP_USING_DHCPD
#define DHCPD_SERVER_IP "192.168.169.1"
#define DHCPD_USING_ROUTER
/* VBUS(Virtual Software BUS) */
......@@ -148,6 +174,9 @@
/* Wiced WiFi */
/* IoT Cloud */
/* security packages */
......@@ -173,12 +202,27 @@
/* sample package */
/* samples: kernel and components samples */
/* example package: hello */
/* Privated Packages of RealThread */
/* Network Utilities */
/* Test Packages of RealThread */
/* Env config */
#define RT_USING_UART0
/* External Libraries */
#define RT_USING_SMARTCONFIG_LIB
#define BSP_USING_WIFI
#endif
bsp/amebaz/rtconfig.py
浏览文件 @ d23a65d5
......@@ -9,12 +9,17 @@ if os.getenv('RTT_CC'):
CROSS_TOOL = os.getenv('RTT_CC')
if os.getenv('RTT_ROOT'):
RTT_ROOT = os.getenv('RTT_ROOT')
else:
RTT_ROOT = os.path.join(os.path.normpath(os.getcwd()), 'rt-thread')
# cross_tool provides the cross compiler
# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
if CROSS_TOOL == 'gcc':
PLATFORM = 'gcc'
EXEC_PATH = r'/opt/gcc-arm-none-eabi-5_4-2016q3/bin'
EXEC_PATH = 'C:/work/env/tools/gnu_gcc/arm_gcc/mingw/bin'
elif CROSS_TOOL == 'iar':
PLATFORM = 'iar'
EXEC_PATH = 'C:/Program Files (x86)/IAR Systems/Embedded Workbench 7.0'
else:
print 'Please make sure your toolchains is GNU GCC!'
exit(0)
......@@ -39,7 +44,7 @@ if PLATFORM == 'gcc':
NM = PREFIX + 'nm'
DEVICE = ' -DM3 -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
CFLAGS = DEVICE + ' -g2 -w -O2 -Wno-pointer-sign -fno-common -fmessage-length=0 -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-short-enums -DF_CPU=166000000L -std=gnu99 -fsigned-char'
CFLAGS = DEVICE + ' -g2 -Wall -Wno-pointer-sign -fno-common -fmessage-length=0 -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-short-enums -DF_CPU=166000000L -std=gnu99 -fsigned-char'
AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
LFLAGS = DEVICE + ' -lm -lgcc -lc' + ' -g --specs=nano.specs -nostartfiles -Wl,-Map=rtthread.map -Os -Wl,--gc-sections -Wl,--cref -Wl,--entry=Reset_Handler -Wl,--no-enum-size-warning -Wl,--no-wchar-size-warning -T./rlx8711B-symbol-v02-img2_xip1.ld'
LFLAGS += ' -Wl,-wrap,rtl_printf'
......@@ -48,7 +53,7 @@ if PLATFORM == 'gcc':
LPATH = ''
if BUILD == 'debug':
CFLAGS += ' -O0 -gdwarf-2'
CFLAGS += ' -Os -gdwarf-2'
AFLAGS += ' -gdwarf-2'
else:
CFLAGS += ' -O2'
......@@ -61,32 +66,6 @@ if PLATFORM == 'gcc':
M_CFLAGS = CFLAGS + ' -mlong-calls -Dsourcerygxx -O0 -fPIC '
M_LFLAGS = DEVICE + ' -Wl,-z,max-page-size=0x4 -shared -fPIC -e main -nostdlib'
elif PLATFORM == 'armcc':
# toolchains
CC = 'armcc'
AS = 'armasm'
AR = 'armar'
LINK = 'armlink'
TARGET_EXT = 'axf'
DEVICE = ' --cpu=cortex-m4.fp'
CFLAGS = DEVICE + ' --apcs=interwork -DSTM32F429_439xx'
AFLAGS = DEVICE
LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter stm32f429_flash.sct'
CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
EXEC_PATH += '/arm/bin40/'
if BUILD == 'debug':
CFLAGS += ' -g -O0'
AFLAGS += ' -g'
else:
CFLAGS += ' -O2'
POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
elif PLATFORM == 'iar':
# toolchains
......@@ -96,7 +75,7 @@ elif PLATFORM == 'iar':
LINK = 'ilinkarm'
TARGET_EXT = 'out'
DEVICE = ' -D USE_STDPERIPH_DRIVER' + ' -D STM32F10X_HD'
DEVICE = '-Dewarm'
CFLAGS = DEVICE
CFLAGS += ' --diag_suppress Pa050'
......@@ -107,26 +86,31 @@ elif PLATFORM == 'iar':
CFLAGS += ' --no_tbaa'
CFLAGS += ' --no_clustering'
CFLAGS += ' --no_scheduling'
CFLAGS += ' --debug'
CFLAGS += ' --endian=little'
CFLAGS += ' --cpu=Cortex-M4'
CFLAGS += ' -e'
CFLAGS += ' --fpu=None'
CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
CFLAGS += ' -Ol'
CFLAGS += ' --use_c++_inline'
CFLAGS += ' --silent'
AFLAGS = ''
AFLAGS = DEVICE
AFLAGS += ' -s+'
AFLAGS += ' -w+'
AFLAGS += ' -r'
AFLAGS += ' --cpu Cortex-M4'
AFLAGS += ' --fpu None'
AFLAGS += ' -S'
if BUILD == 'debug':
CFLAGS += ' --debug'
CFLAGS += ' -On'
else:
CFLAGS += ' -Oh'
LFLAGS = ' --config stm32f429_flash.icf'
LFLAGS = ' --config rom_symbol_v01_iar.icf'
LFLAGS += ' --redirect _Printf=_PrintfTiny'
LFLAGS += ' --redirect _Scanf=_ScanfSmall'
LFLAGS += ' --entry __iar_program_start'
EXEC_PATH = EXEC_PATH + '/arm/bin/'
POST_ACTION = ''
POST_ACTION = 'ielftool --bin $TARGET rt-thread.bin'
bsp/amebaz/template.ewd
浏览文件 @ d23a65d5
......@@ -45,7 +45,7 @@
</option>
<option>
<name>MemFile</name>
<state>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\8710b.ddf</state>
<state>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\preload.mac</state>
</option>
<option>
<name>RunToEnable</name>
......@@ -81,7 +81,7 @@
</option>
<option>
<name>OCProductVersion</name>
<state>7.40.3.8937</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>OCDynDriverList</name>
......@@ -89,7 +89,7 @@
</option>
<option>
<name>OCLastSavedByProductVersion</name>
<state>7.40.3.8937</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>OCDownloadAttachToProgram</name>
......@@ -520,7 +520,7 @@
<name>IJET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>6</version>
<version>5</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
......@@ -603,7 +603,7 @@
</option>
<option>
<name>IjetCpuClockEdit</name>
<state></state>
<state>72.0</state>
</option>
<option>
<name>IjetSwoPrescalerList</name>
......@@ -732,10 +732,6 @@
<version>0</version>
<state>2</state>
</option>
<option>
<name>FlashBoardPathSlave</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
......@@ -844,7 +840,7 @@
</option>
<option>
<name>CCJLinkInterfaceRadio</name>
<state>0</state>
<state>1</state>
</option>
<option>
<name>OCJLinkAttachSlave</name>
......@@ -1256,7 +1252,7 @@
<name>XDS100_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>4</version>
<version>2</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
......@@ -1275,6 +1271,11 @@
<name>TIPackage</name>
<state></state>
</option>
<option>
<name>CCXds100InterfaceList</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>BoardFile</name>
<state></state>
......@@ -1287,129 +1288,6 @@
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCXds100BreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100DoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCXds100UpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCXds100CatchReset</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchData</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCXds100CpuClockEdit</name>
<state>72.0</state>
</option>
<option>
<name>CCXds100SwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCXds100SwoClockEdit</name>
<state>1000</state>
</option>
<option>
<name>CCXds100HWResetDelay</name>
<state>0</state>
</option>
<option>
<name>CCXds100ResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100UsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCXds100UsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCXds100JtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100InterfaceRadio</name>
<state>2</state>
</option>
<option>
<name>CCXds100InterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCXds100ProbeList</name>
<version>0</version>
<state>0</state>
</option>
</data>
</settings>
<debuggerPlugins>
......@@ -1566,7 +1444,7 @@
</option>
<option>
<name>OCProductVersion</name>
<state>7.40.3.8937</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>OCDynDriverList</name>
......@@ -1670,7 +1548,7 @@
</option>
<option>
<name>OCMulticoreNrOfCores</name>
<state></state>
<state>1</state>
</option>
<option>
<name>OCMulticoreMaster</name>
......@@ -2005,7 +1883,7 @@
<name>IJET_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>6</version>
<version>5</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
......@@ -2217,10 +2095,6 @@
<version>0</version>
<state>2</state>
</option>
<option>
<name>FlashBoardPathSlave</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
......@@ -2741,7 +2615,7 @@
<name>XDS100_ID</name>
<archiveVersion>2</archiveVersion>
<data>
<version>4</version>
<version>2</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
......@@ -2760,6 +2634,11 @@
<name>TIPackage</name>
<state></state>
</option>
<option>
<name>CCXds100InterfaceList</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>BoardFile</name>
<state></state>
......@@ -2772,129 +2651,6 @@
<name>LogFile</name>
<state>$PROJ_DIR$\cspycomm.log</state>
</option>
<option>
<name>CCXds100BreakpointRadio</name>
<state>0</state>
</option>
<option>
<name>CCXds100DoUpdateBreakpoints</name>
<state>0</state>
</option>
<option>
<name>CCXds100UpdateBreakpoints</name>
<state>_call_main</state>
</option>
<option>
<name>CCXds100CatchReset</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchUndef</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSWI</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchData</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchPrefetch</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchIRQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchFIQ</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCORERESET</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchMMERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchNOCPERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchCHRERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchSTATERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchBUSERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchINTERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchHARDERR</name>
<state>0</state>
</option>
<option>
<name>CCXds100CatchDummy</name>
<state>0</state>
</option>
<option>
<name>CCXds100CpuClockEdit</name>
<state>72.0</state>
</option>
<option>
<name>CCXds100SwoClockAuto</name>
<state>0</state>
</option>
<option>
<name>CCXds100SwoClockEdit</name>
<state>1000</state>
</option>
<option>
<name>CCXds100HWResetDelay</name>
<state>0</state>
</option>
<option>
<name>CCXds100ResetList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100UsbSerialNo</name>
<state></state>
</option>
<option>
<name>CCXds100UsbSerialNoSelect</name>
<state>0</state>
</option>
<option>
<name>CCXds100JtagSpeedList</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCXds100InterfaceRadio</name>
<state>2</state>
</option>
<option>
<name>CCXds100InterfaceCmdLine</name>
<state>0</state>
</option>
<option>
<name>CCXds100ProbeList</name>
<version>0</version>
<state>0</state>
</option>
</data>
</settings>
<debuggerPlugins>
......
bsp/amebaz/template.ewp
浏览文件 @ d23a65d5
......@@ -12,7 +12,7 @@
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>24</version>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
......@@ -27,6 +27,11 @@
<name>ListPath</name>
<state>Debug\List</state>
</option>
<option>
<name>Variant</name>
<version>21</version>
<state>39</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
......@@ -34,25 +39,30 @@
<option>
<name>Input variant</name>
<version>3</version>
<state>7</state>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state>No specifier n, no float nor long long, no scan set, no assignment suppressing, without multibyte support.</state>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>Output variant</name>
<version>2</version>
<state>7</state>
<state>0</state>
</option>
<option>
<name>Output description</name>
<state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>3</version>
<state>5</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
......@@ -73,11 +83,11 @@
</option>
<option>
<name>OGProductVersion</name>
<state>6.10.1.52170</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>7.40.3.8937</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>GeneralEnableMisra</name>
......@@ -89,11 +99,11 @@
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>STM32F107xC ST STM32F107xC</state>
<state>Default None</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
<state>1</state>
</option>
<option>
<name>GEndianModeBE</name>
......@@ -125,9 +135,14 @@
<name>RTConfigPath2</name>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>21</version>
<state>39</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>22</version>
<version>21</version>
<state>39</state>
</option>
<option>
......@@ -142,34 +157,6 @@
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>22</version>
<state>39</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>STM32F107xC ST STM32F107xC</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>4</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>22</version>
<state>39</state>
</option>
</data>
</settings>
<settings>
......@@ -182,6 +169,13 @@
<option>
<name>CCDefines</name>
<state></state>
<state>CONFIG_PLATFORM_8711B</state>
<state>CONFIG_BUILD_ROM</state>
<state>PLATFORM_RTTHREAD</state>
<state>__IEEE_LITTLE_ENDIAN</state>
<state>RT_USING_DLIBC</state>
<state>_DLIB_FILE_DESCRIPTOR</state>
<state>_DLIB_THREAD_SUPPORT</state>
</option>
<option>
<name>CCPreprocFile</name>
......@@ -597,7 +591,7 @@
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<version>2</version>
<state>0</state>
</option>
<option>
......@@ -967,7 +961,7 @@
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>24</version>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
......@@ -982,6 +976,11 @@
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>Variant</name>
<version>21</version>
<state>0</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
......@@ -989,7 +988,7 @@
<option>
<name>Input variant</name>
<version>3</version>
<state>1</state>
<state>0</state>
</option>
<option>
<name>Input description</name>
......@@ -998,7 +997,7 @@
<option>
<name>Output variant</name>
<version>2</version>
<state>1</state>
<state>0</state>
</option>
<option>
<name>Output description</name>
......@@ -1008,6 +1007,11 @@
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
......@@ -1028,11 +1032,11 @@
</option>
<option>
<name>OGProductVersion</name>
<state>6.10.1.52170</state>
<state>7.30.4.8186</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>7.40.3.8937</state>
<state></state>
</option>
<option>
<name>GeneralEnableMisra</name>
......@@ -1044,7 +1048,7 @@
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>Default None</state>
<state></state>
</option>
<option>
<name>GenLowLevelInterface</name>
......@@ -1080,10 +1084,15 @@
<name>RTConfigPath2</name>
<state></state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>21</version>
<state>1</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>22</version>
<state>0</state>
<version>21</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
......@@ -1097,34 +1106,6 @@
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
<option>
<name>CoreVariant</name>
<version>22</version>
<state>0</state>
</option>
<option>
<name>GFPUDeviceSlave</name>
<state>Default None</state>
</option>
<option>
<name>FPU2</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NrRegs</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>NEON</name>
<state>0</state>
</option>
<option>
<name>GFPUCoreSlave2</name>
<version>22</version>
<state>0</state>
</option>
</data>
</settings>
<settings>
......@@ -1552,7 +1533,7 @@
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>3</version>
<version>2</version>
<state>0</state>
</option>
<option>
......
bsp/amebaz/template.ewt
浏览文件 @ d23a65d5
此差异已折叠。
bsp/amebaz/template.eww 0 → 100644
浏览文件 @ d23a65d5
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\template.ewp</path>
</project>
<batchBuild/>
</workspace>
bsp/amebaz/tmp.board
浏览文件 @ d23a65d5
......@@ -12,10 +12,10 @@
<abs_offset>0xb020</abs_offset>
</pass>
<pass>
<range>CODE 0x10005000 0x10005A6B</range>
<range>CODE 0x10005000 0x10005A9B</range>
<loader>$PROJ_DIR$\packages\realtek_ameba-latest\sdk-ameba-v4.0b_without_NDA_GCC_V1.0.0\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
<abs_offset>0xb000</abs_offset>
<args>--concat</args>
</pass>
<ignore>CODE 0x10005a6c 0x1003dfff</ignore>
<ignore>CODE 0x10005a9c 0x1003dfff</ignore>
</flash_board>
bsp/frdm-k64f/applications/application.c
浏览文件 @ d23a65d5
/*
* File : application.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
......
bsp/frdm-k64f/applications/startup.c
浏览文件 @ d23a65d5
/*
* File : startup.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Develop Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://openlab.rt-thread.com/license/LICENSE
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
......
bsp/frdm-k64f/board/board.c
浏览文件 @ d23a65d5
/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 RT-Thread Develop Team
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
......
bsp/frdm-k64f/board/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/drv_emac.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/drv_emac.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/drv_uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/drv_uart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/frdm-k64f/board/led.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/cp15_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/pmu.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6sx/cortex-a9/cpu/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6ul/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6ul/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6ul/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6ul/drivers/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/imx6ul/drivers/serial.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/applications/platform.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/applications/platform.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/emac.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/led.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/sd.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc176x/drivers/uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/emac.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/lpc17xx_lcd.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/sdram.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc178x/drivers/uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/drivers/dm9000.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/drivers/sd.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2148/drivers/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2478/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2478/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2478/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc2478/drivers/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/canapp.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/sram.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/sram.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_emac.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_emac.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_hwtimer.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_lpccan.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_lpccan.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_sdram.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_sdram.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc408x/drivers/drv_uart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/M0/applications/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/M0/applications/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/M4/applications/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/M4/applications/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/drivers/drv_emac.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/drivers/drv_emac.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/drivers/drv_led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc43xx/drivers/drv_uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc5410x/applications/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc5410x/applications/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc5410x/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc5410x/drivers/drv_led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc5410x/drivers/drv_uart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc824/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc824/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc824/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc824/drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/lpc824/drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/applications/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/led.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f0x/drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/gpio.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/gpio.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/stm32f1_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/stm32f1_rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f107/drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x-HAL/Kconfig
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x-HAL/drivers/drv_iwg.c 0 → 100644
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x-HAL/drivers/drv_iwg.h 0 → 100644
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/applications/canapp.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/bxcan.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/bxcan.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/dm9000a.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/dm9000a.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/fm24cl64.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/fm24cl64.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/gpio.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/gpio.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/led.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/led.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/stm32f1_i2c.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/stm32f1_i2c.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/stm32f1_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/stm32f1_rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/stm32f1_wdg.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f10x/drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/24LCxx.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/drv_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/drv_rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/i2c.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/serial.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f20x/Drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/applications/main.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/drv_hwtimer.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/gpio.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/gpio.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/stm32f4_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/stm32f4_rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f40x/drivers/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_can.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_can.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_i2c.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_i2c.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_iwg.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_iwg.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_pwm.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_spi.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f4xx-HAL/drivers/drv_spi.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f7-disco/drivers/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f7-disco/drivers/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f7-disco/drivers/drv_mpu.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32f7-disco/drivers/drv_mpu.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/app/application.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/app/startup.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/board.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/board.h
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/drv_spi.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/gpio.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/usart.c
浏览文件 @ d23a65d5
此差异已折叠。
bsp/stm32l072/board/usart.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Lock.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Mail.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Mutex.cpp
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Mutex.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Queue.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Semaphore.cpp
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Semaphore.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Thread.cpp
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/Thread.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/crt.cpp
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/crt.h
浏览文件 @ d23a65d5
此差异已折叠。
components/cplusplus/crt_init.c
浏览文件 @ d23a65d5
此差异已折叠。
components/dfs/src/dfs_file.c
浏览文件 @ d23a65d5
此差异已折叠。
components/dfs/src/dfs_posix.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/audio/audio.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/can/can.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/i2c/fm24clxx.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/i2c/fm24clxx.h
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/i2c/i2c_core.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/i2c/i2c_dev.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/misc/pin.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/mtd/mtd.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/mtd/mtd_nand.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/mtd/mtd_nor.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/mtd/mtdnand.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/mtd/mtdnor.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/rtc/alarm.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/rtc/rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/rtc/soft_rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/sdio/block_dev.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/sdio/mmc.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/sdio/sd.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/sdio/sdio.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/sensors/sensor.h
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/serial/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/enc28j60.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/enc28j60.h
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/spi_core.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/spi_dev.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/spi_flash.h
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/spi_msd.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/spi/spi_msd.h
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/completion.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/dataqueue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/pipe.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/ringbuffer.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/waitqueue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/src/workqueue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/wlan/wlan_lwip.c
浏览文件 @ d23a65d5
此差异已折叠。
components/drivers/wlan/wlan_mgnt.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/cmd.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_api.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_compiler.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_error.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_error.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_heap.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_heap.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_init.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_node.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_node.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_ops.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_ops.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_parser.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_parser.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_token.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_token.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_var.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_var.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_vm.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/finsh_vm.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/msh.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/msh.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/msh_cmd.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/msh_file.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/shell.c
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/shell.h
浏览文件 @ d23a65d5
此差异已折叠。
components/finsh/symbol.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/aio/posix_aio.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/aio/posix_aio.h
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/mmap/posix_mmap.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/mqueue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/mqueue.h
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/pthread.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/pthread.h
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/sched.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/pthreads/sched.h
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/time/clock_time.c
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/time/clock_time.h
浏览文件 @ d23a65d5
此差异已折叠。
components/libc/time/posix_sleep.c
浏览文件 @ d23a65d5
此差异已折叠。
components/net/at/src/at_client.c
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/prio_queue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/prio_queue.h
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/vbus.c
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/vbus.h
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/vbus_chnx.c
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/watermark_queue.c
浏览文件 @ d23a65d5
此差异已折叠。
components/vbus/watermark_queue.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtdbg.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtdebug.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rthw.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtlibc.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtm.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtservice.h
浏览文件 @ d23a65d5
此差异已折叠。
include/rtthread.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/AT91SAM7S.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/serial.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7S/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/AT91SAM7X/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/am33xx.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/cp15_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/cp15_iar.s
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/interrupt.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/mmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/start_iar.s
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/am335x/vector_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/mmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/arm926/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/arm_entry_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/armv6.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/mmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/vfp.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/armv6/vfp.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/common/backtrace.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/common/div0.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/common/divsi3.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/common/showmem.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/armv7.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/cp15.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/cp15_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/pmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/pmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-a/vector_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m0/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m0/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m3/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m3/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m4/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-m7/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/armv7.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/cortex-r4/vector_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/dm36x/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/dm36x/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/dm36x/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/dm36x/mmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/dm36x/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc214x/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc214x/cpuport.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc214x/startup_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/LPC24xx.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/start_rvds.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/lpc24xx/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/armv7.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/cp15.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/gic.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/gic.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/pmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/pmu.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/realview-a8-vmm/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/mmu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/rtc.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/rtc.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/s3c24x0.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/serial.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/system_clock.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c24x0/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/context_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/s3c44b0.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/s3c44b0/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/clk.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/interrupt.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/sep4020.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/serial.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/serial.h
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/sep4020/trap.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/zynq7000/cp15_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/zynq7000/cpu.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/zynq7000/stack.c
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/zynq7000/start_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
libcpu/arm/zynq7000/vector_gcc.S
浏览文件 @ d23a65d5
此差异已折叠。
src/mem.c
浏览文件 @ d23a65d5
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或