提交 be9c94dd 编写于 作者: J Johannes Berg 提交者: Paul Mackerras

[POWERPC] Fix suspend states again

In commit 0fba3a1f (a very long time ago,
May 2006), I fixed a bug that caused powermacs to crash when you tried
entering standby/mem suspend states.

As I'm now getting more familiar with the suspend code I notice a few
more things:
 1. we previously misunderstood what pm_ops is for, it isn't supposed to be
    for doing platform dependent suspend/resume stuff that needs to be done
    for suspend to disk (as we currently try to use it!), it is instead for
    entering platform dependent suspend states ("standby", "mem").
 2. due to the first point, we never properly save FPU and altivec states
    when suspending to disk. It probably hasn't hurt yet because the process
    that writes the "disk" to /sys/power/state uses neither and its context
    is used.

This patch addresses these points as follows:
 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently
    usable via /sys/power/state but is done via the PMU instead.
 2. move the code responsible for storing FPU/altivec state into
    save_processor_state and the set_context() call to restore_processor_state.
 3. add a call to kernel_enable_spe()

It may look like there is some code removal missing but that is
actually because the new suspend.h file overrides the ppc/suspend.h
one which was previously used.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 f88df14b
......@@ -36,6 +36,7 @@ obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o
obj32-$(CONFIG_MODULES) += module_32.o
......
/*
* Common powerpc suspend code for 32 and 64 bits
*
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/sched.h>
#include <asm/suspend.h>
#include <asm/system.h>
#include <asm/current.h>
#include <asm/mmu_context.h>
void save_processor_state(void)
{
/*
* flush out all the special registers so we don't need
* to save them in the snapshot
*/
flush_fp_to_thread(current);
flush_altivec_to_thread(current);
flush_spe_to_thread(current);
}
void restore_processor_state(void)
{
#ifdef CONFIG_PPC32
set_context(current->active_mm->context.id, current->active_mm->pgd);
#endif
}
......@@ -439,76 +439,11 @@ static void __init find_boot_device(void)
#endif
}
/* TODO: Merge the suspend-to-ram with the common code !!!
* currently, this is a stub implementation for suspend-to-disk
* only
*/
#ifdef CONFIG_SOFTWARE_SUSPEND
static int pmac_pm_prepare(suspend_state_t state)
{
printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
return 0;
}
static int pmac_pm_enter(suspend_state_t state)
{
printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
/* Giveup the lazy FPU & vec so we don't have to back them
* up from the low level code
*/
enable_kernel_fp();
#ifdef CONFIG_ALTIVEC
if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
enable_kernel_altivec();
#endif /* CONFIG_ALTIVEC */
return 0;
}
static int pmac_pm_finish(suspend_state_t state)
{
printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
/* Restore userland MMU context */
set_context(current->active_mm->context.id, current->active_mm->pgd);
return 0;
}
static int pmac_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_DISK:
return 1;
/* can't do any other states via generic mechanism yet */
default:
return 0;
}
}
static struct pm_ops pmac_pm_ops = {
.pm_disk_mode = PM_DISK_SHUTDOWN,
.prepare = pmac_pm_prepare,
.enter = pmac_pm_enter,
.finish = pmac_pm_finish,
.valid = pmac_pm_valid,
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
static int initializing = 1;
static int pmac_late_init(void)
{
initializing = 0;
#ifdef CONFIG_SOFTWARE_SUSPEND
pm_set_ops(&pmac_pm_ops);
#endif /* CONFIG_SOFTWARE_SUSPEND */
return 0;
}
......
#ifndef __ASM_POWERPC_SUSPEND_H
#define __ASM_POWERPC_SUSPEND_H
static inline int arch_prepare_suspend(void) { return 0; }
void save_processor_state(void);
void restore_processor_state(void);
#endif /* __ASM_POWERPC_SUSPEND_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册