提交 5e5aacb0 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: add isp1161 usb host device to se7343

Add isp1161 platform data to get usb host working on se7343.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 6aacba72
......@@ -3,6 +3,8 @@
#include <linux/mtd/physmap.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/usb/isp116x.h>
#include <linux/delay.h>
#include <asm/machvec.h>
#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
......@@ -126,11 +128,54 @@ static struct platform_device uart_device = {
},
};
static void isp116x_delay(struct device *dev, int delay)
{
ndelay(delay);
}
static struct resource usb_resources[] = {
[0] = {
.start = 0x11800000,
.end = 0x11800001,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x11800002,
.end = 0x11800003,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = USB_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct isp116x_platform_data usb_platform_data = {
.sel15Kres = 1,
.oc_enable = 1,
.int_act_high = 0,
.int_edge_triggered = 0,
.remote_wakeup_enable = 0,
.delay = isp116x_delay,
};
static struct platform_device usb_device = {
.name = "isp116x-hcd",
.id = -1,
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
.dev = {
.platform_data = &usb_platform_data,
},
};
static struct platform_device *sh7343se_platform_devices[] __initdata = {
&smc91x_device,
&heartbeat_device,
&nor_flash_device,
&uart_device,
&usb_device,
};
static int __init sh7343se_devices_setup(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册