提交 52783c5d 编写于 作者: T Tejun Heo

[PATCH] libata-hp: killl ops->probe_reset

Now that all drivers implementing new EH are converted to new probing
mechanism, ops->probe_reset doesn't have any user.  Kill it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
上级 0542925b
......@@ -1479,31 +1479,21 @@ static int ata_bus_probe(struct ata_port *ap)
down_xfermask = 0;
/* reset and determine device classes */
for (i = 0; i < ATA_MAX_DEVICES; i++)
classes[i] = ATA_DEV_UNKNOWN;
ap->ops->phy_reset(ap);
if (ap->ops->probe_reset) {
rc = ap->ops->probe_reset(ap, classes);
if (rc) {
ata_port_printk(ap, KERN_ERR,
"reset failed (errno=%d)\n", rc);
return rc;
}
} else {
ap->ops->phy_reset(ap);
for (i = 0; i < ATA_MAX_DEVICES; i++) {
dev = &ap->device[i];
for (i = 0; i < ATA_MAX_DEVICES; i++) {
if (!(ap->flags & ATA_FLAG_DISABLED))
classes[i] = ap->device[i].class;
ap->device[i].class = ATA_DEV_UNKNOWN;
}
if (!(ap->flags & ATA_FLAG_DISABLED) &&
dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
else
classes[dev->devno] = ATA_DEV_NONE;
ata_port_probe(ap);
dev->class = ATA_DEV_UNKNOWN;
}
for (i = 0; i < ATA_MAX_DEVICES; i++)
if (classes[i] == ATA_DEV_UNKNOWN)
classes[i] = ATA_DEV_NONE;
ata_port_probe(ap);
/* after the reset the device state is PIO 0 and the controller
state is undefined. Record the mode */
......@@ -2609,38 +2599,12 @@ int ata_std_prereset(struct ata_port *ap)
return 0;
}
/**
* ata_std_probeinit - initialize probing
* @ap: port to be probed
*
* @ap is about to be probed. Initialize it. This function is
* to be used as standard callback for ata_drive_probe_reset().
*
* NOTE!!! Do not use this function as probeinit if a low level
* driver implements only hardreset. Just pass NULL as probeinit
* in that case. Using this function is probably okay but doing
* so makes reset sequence different from the original
* ->phy_reset implementation and Jeff nervous. :-P
*/
void ata_std_probeinit(struct ata_port *ap)
{
static const unsigned long deb_timing[] = { 5, 100, 5000 };
/* resume link */
sata_phy_resume(ap, deb_timing);
/* wait for device */
if (ata_port_online(ap))
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
}
/**
* ata_std_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
*
* Reset host port using ATA SRST. This function is to be used
* as standard callback for ata_drive_*_reset() functions.
* Reset host port using ATA SRST.
*
* LOCKING:
* Kernel thread context (may sleep)
......@@ -2695,8 +2659,6 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
* @class: resulting class of attached device
*
* SATA phy-reset host port using DET bits of SControl register.
* This function is to be used as standard callback for
* ata_drive_*_reset().
*
* LOCKING:
* Kernel thread context (may sleep)
......@@ -2775,9 +2737,6 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
* the device might have been reset more than once using
* different reset methods before postreset is invoked.
*
* This function is to be used as standard callback for
* ata_drive_*_reset().
*
* LOCKING:
* Kernel thread context (may sleep)
*/
......@@ -2824,32 +2783,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
DPRINTK("EXIT\n");
}
/**
* ata_std_probe_reset - standard probe reset method
* @ap: prot to perform probe-reset
* @classes: resulting classes of attached devices
*
* The stock off-the-shelf ->probe_reset method.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
{
ata_reset_fn_t hardreset;
hardreset = NULL;
if (sata_scr_valid(ap))
hardreset = sata_std_hardreset;
return ata_drive_probe_reset(ap, ata_std_probeinit,
ata_std_softreset, hardreset,
ata_std_postreset, classes);
}
int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
unsigned int *classes)
{
......@@ -2878,97 +2811,6 @@ int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
return 0;
}
/**
* ata_drive_probe_reset - Perform probe reset with given methods
* @ap: port to reset
* @probeinit: probeinit method (can be NULL)
* @softreset: softreset method (can be NULL)
* @hardreset: hardreset method (can be NULL)
* @postreset: postreset method (can be NULL)
* @classes: resulting classes of attached devices
*
* Reset the specified port and classify attached devices using
* given methods. This function prefers softreset but tries all
* possible reset sequences to reset and classify devices. This
* function is intended to be used for constructing ->probe_reset
* callback by low level drivers.
*
* Reset methods should follow the following rules.
*
* - Return 0 on sucess, -errno on failure.
* - If classification is supported, fill classes[] with
* recognized class codes.
* - If classification is not supported, leave classes[] alone.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
* if classification fails, and any error code from reset
* methods.
*/
int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset, unsigned int *classes)
{
int rc = -EINVAL;
ata_eh_freeze_port(ap);
if (probeinit)
probeinit(ap);
if (softreset && !sata_set_spd_needed(ap)) {
rc = ata_do_reset(ap, softreset, classes);
if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
goto done;
ata_port_printk(ap, KERN_INFO, "softreset failed, "
"will try hardreset in 5 secs\n");
ssleep(5);
}
if (!hardreset)
goto done;
while (1) {
rc = ata_do_reset(ap, hardreset, classes);
if (rc == 0) {
if (classes[0] != ATA_DEV_UNKNOWN)
goto done;
break;
}
if (sata_down_spd_limit(ap))
goto done;
ata_port_printk(ap, KERN_INFO, "hardreset failed, "
"will retry in 5 secs\n");
ssleep(5);
}
if (softreset) {
ata_port_printk(ap, KERN_INFO,
"hardreset succeeded without classification, "
"will retry softreset in 5 secs\n");
ssleep(5);
rc = ata_do_reset(ap, softreset, classes);
}
done:
if (rc == 0) {
if (postreset)
postreset(ap, classes);
ata_eh_thaw_port(ap);
if (classes[0] == ATA_DEV_UNKNOWN)
rc = -ENODEV;
}
return rc;
}
/**
* ata_dev_same_device - Determine whether new ID matches configured device
* @dev: device to compare against
......@@ -5419,7 +5261,7 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
DPRINTK("ENTER\n");
if (!ent->port_ops->probe_reset && !ent->port_ops->error_handler &&
if (!ent->port_ops->error_handler &&
!(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
printk(KERN_ERR "ata%u: no reset mechanism available\n",
port_no);
......@@ -5551,7 +5393,7 @@ int ata_device_add(const struct ata_probe_ent *ent)
*/
}
if (!ap->ops->probe_reset) {
if (ap->ops->error_handler) {
unsigned long flags;
ata_port_probe(ap);
......@@ -5998,13 +5840,10 @@ EXPORT_SYMBOL_GPL(sata_phy_resume);
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_probeinit);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
EXPORT_SYMBOL_GPL(ata_std_probe_reset);
EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_dev_revalidate);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
......
......@@ -303,7 +303,6 @@ struct ata_queued_cmd;
/* typedefs */
typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
typedef void (*ata_probeinit_fn_t)(struct ata_port *ap);
typedef int (*ata_prereset_fn_t)(struct ata_port *ap);
typedef int (*ata_reset_fn_t)(struct ata_port *ap, unsigned int *classes);
typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *classes);
......@@ -553,7 +552,6 @@ struct ata_port_operations {
void (*phy_reset) (struct ata_port *ap); /* obsolete */
void (*set_mode) (struct ata_port *ap);
int (*probe_reset) (struct ata_port *ap, unsigned int *classes);
void (*post_set_mode) (struct ata_port *ap);
......@@ -628,11 +626,6 @@ extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_port *ap);
extern int sata_phy_debounce(struct ata_port *ap, const unsigned long *param);
extern int sata_phy_resume(struct ata_port *ap, const unsigned long *param);
extern int ata_drive_probe_reset(struct ata_port *ap,
ata_probeinit_fn_t probeinit,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset, unsigned int *classes);
extern void ata_std_probeinit(struct ata_port *ap);
extern int ata_std_prereset(struct ata_port *ap);
extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
......@@ -688,7 +681,6 @@ extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
extern void ata_host_stop (struct ata_host_set *host_set);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册