提交 233fa44b 编写于 作者: J Jiri Pirko 提交者: David S. Miller

mlxsw: pci: Implement reset done check

Firmware now tells us that the reset is done by passing a magic value
via register. Use it to shorten the wait in case this is supported.
With old firmware, we still wait until the timeout is reached.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cea8768f
......@@ -1681,11 +1681,18 @@ static const struct mlxsw_bus mlxsw_pci_bus = {
static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci)
{
unsigned long end;
mlxsw_pci_write32(mlxsw_pci, SW_RESET, MLXSW_PCI_SW_RESET_RST_BIT);
/* Current firware does not let us know when the reset is done.
* So we just wait here for constant time and hope for the best.
*/
msleep(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS);
wmb(); /* reset needs to be written before we read control register */
end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS);
do {
u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY);
if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC)
break;
cond_resched();
} while (time_before(jiffies, end));
return 0;
}
......
......@@ -61,6 +61,9 @@
#define MLXSW_PCI_SW_RESET 0xF0010
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
#define MLXSW_PCI_FW_READY 0xA1844
#define MLXSW_PCI_FW_READY_MASK 0xFF
#define MLXSW_PCI_FW_READY_MAGIC 0x5E
#define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000
#define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册