提交 1a66fdf0 编写于 作者: J Jim Cromie 提交者: Linus Torvalds

[PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module

Now that the read(), write() file-ops are dispatching gpio-ops via the vtable,
they are generic, and can be moved 'verbatim' to the nsc_gpio common-support
module.  After the move, various symbols are renamed to update 'scx200_' to
'nsc_', and headers are adjusted accordingly.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 1ca5df0a
......@@ -19,9 +19,89 @@
#define NAME "nsc_gpio"
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
MODULE_DESCRIPTION("NatSemi GPIO Common Methods");
MODULE_LICENSE("GPL");
ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
size_t i;
int err = 0;
for (i = 0; i < len; ++i) {
char c;
if (get_user(c, data + i))
return -EFAULT;
switch (c) {
case '0':
amp->gpio_set(m, 0);
break;
case '1':
amp->gpio_set(m, 1);
break;
case 'O':
printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
amp->gpio_config(m, ~1, 1);
break;
case 'o':
printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
amp->gpio_config(m, ~1, 0);
break;
case 'T':
printk(KERN_INFO NAME ": GPIO%d output is push pull\n",
m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
printk(KERN_INFO NAME ": GPIO%d output is open drain\n",
m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
amp->gpio_config(m, ~4, 4);
break;
case 'p':
printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
amp->gpio_config(m, ~4, 0);
break;
case 'v':
/* View Current pin settings */
amp->gpio_dump(m);
break;
case '\n':
/* end of settings string, do nothing */
break;
default:
printk(KERN_ERR NAME
": GPIO-%2d bad setting: chr<0x%2x>\n", m,
(int)c);
err++;
}
}
if (err)
return -EINVAL; /* full string handled, report error */
return len;
}
ssize_t nsc_gpio_read(struct file *file, char __user * buf,
size_t len, loff_t * ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
int value;
struct nsc_gpio_ops *amp = file->private_data;
value = amp->gpio_get(m);
if (put_user(value ? '1' : '0', buf))
return -EFAULT;
return 1;
}
/* common routines for both scx200_gpio and pc87360_gpio */
EXPORT_SYMBOL(nsc_gpio_write);
EXPORT_SYMBOL(nsc_gpio_read);
static int __init nsc_gpio_init(void)
{
......@@ -34,12 +114,9 @@ static void __exit nsc_gpio_cleanup(void)
printk(KERN_DEBUG NAME " cleanup\n");
}
/* prepare for
common routines for both scx200_gpio and pc87360_gpio
EXPORT_SYMBOL(scx200_gpio_write);
EXPORT_SYMBOL(scx200_gpio_read);
EXPORT_SYMBOL(scx200_gpio_release);
*/
module_init(nsc_gpio_init);
module_exit(nsc_gpio_cleanup);
MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");
MODULE_DESCRIPTION("NatSemi GPIO Common Methods");
MODULE_LICENSE("GPL");
......@@ -37,6 +37,12 @@ MODULE_PARM_DESC(major, "Major device number");
extern void scx200_gpio_dump(unsigned index);
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos);
extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
struct nsc_gpio_ops scx200_access = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
......@@ -49,84 +55,6 @@ struct nsc_gpio_ops scx200_access = {
.gpio_current = scx200_gpio_current
};
static ssize_t scx200_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
struct nsc_gpio_ops *amp = file->private_data;
size_t i;
int err = 0;
for (i = 0; i < len; ++i) {
char c;
if (get_user(c, data + i))
return -EFAULT;
switch (c) {
case '0':
amp->gpio_set(m, 0);
break;
case '1':
amp->gpio_set(m, 1);
break;
case 'O':
printk(KERN_INFO NAME ": GPIO%d output enabled\n", m);
amp->gpio_config(m, ~1, 1);
break;
case 'o':
printk(KERN_INFO NAME ": GPIO%d output disabled\n", m);
amp->gpio_config(m, ~1, 0);
break;
case 'T':
printk(KERN_INFO NAME ": GPIO%d output is push pull\n", m);
amp->gpio_config(m, ~2, 2);
break;
case 't':
printk(KERN_INFO NAME ": GPIO%d output is open drain\n", m);
amp->gpio_config(m, ~2, 0);
break;
case 'P':
printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m);
amp->gpio_config(m, ~4, 4);
break;
case 'p':
printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m);
amp->gpio_config(m, ~4, 0);
break;
case 'v':
/* View Current pin settings */
amp->gpio_dump(m);
break;
case '\n':
/* end of settings string, do nothing */
break;
default:
printk(KERN_ERR NAME
": GPIO-%2d bad setting: chr<0x%2x>\n", m,
(int)c);
err++;
}
}
if (err)
return -EINVAL; /* full string handled, report error */
return len;
}
static ssize_t scx200_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos)
{
unsigned m = iminor(file->f_dentry->d_inode);
int value;
struct nsc_gpio_ops *amp = file->private_data;
value = amp->gpio_get(m);
if (put_user(value ? '1' : '0', buf))
return -EFAULT;
return 1;
}
static int scx200_gpio_open(struct inode *inode, struct file *file)
{
unsigned m = iminor(inode);
......@@ -145,8 +73,8 @@ static int scx200_gpio_release(struct inode *inode, struct file *file)
static struct file_operations scx200_gpio_fops = {
.owner = THIS_MODULE,
.write = scx200_gpio_write,
.read = scx200_gpio_read,
.write = nsc_gpio_write,
.read = nsc_gpio_read,
.open = scx200_gpio_open,
.release = scx200_gpio_release,
};
......
......@@ -31,3 +31,8 @@ struct nsc_gpio_ops {
int (*gpio_current) (unsigned iminor);
};
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos);
extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册