Skip to content

R
rt-thread

Mr_Pangza / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 715cbb78 编写于 作者: xuzhuoyi96's avatar xuzhuoyi96
浏览文件
操作

[bsp][stm32f429-disco] Add SDRAM support

上级 94cb8722
展开全部 隐藏空白更改
内联 并排
Showing with 15597 addition and 6095 deletion
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/misc.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file misc.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the miscellaneous
* firmware library functions (add-on to CMSIS functions).
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -169,4 +175,4 @@ void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_adc.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_adc.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -319,7 +325,14 @@ typedef struct
#define ADC_Channel_17 ((uint8_t)0x11)
#define ADC_Channel_18 ((uint8_t)0x12)
#if defined (STM32F40_41xxx)
#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16)
#endif /* STM32F40_41xxx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx) || defined (STM32F401xx)
#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_18)
#endif /* STM32F427_437xx || STM32F429_439xx || STM32F401xx */
#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17)
#define ADC_Channel_Vbat ((uint8_t)ADC_Channel_18)
......@@ -640,4 +653,4 @@ void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_can.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_can.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the CAN firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -635,4 +641,4 @@ void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_crc.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_crc.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the CRC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -74,4 +80,4 @@ uint8_t CRC_GetIDRegister(void);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_cryp.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_cryp.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the Cryptographic
* processor(CRYP) firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -46,14 +52,14 @@
*/
typedef struct
{
uint16_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a
uint32_t CRYP_AlgoDir; /*!< Encrypt or Decrypt. This parameter can be a
value of @ref CRYP_Algorithm_Direction */
uint16_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB,
AES-CBC, AES-CTR, AES-Key. This parameter can be
a value of @ref CRYP_Algorithm_Mode */
uint16_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit-string.
uint32_t CRYP_AlgoMode; /*!< TDES-ECB, TDES-CBC, DES-ECB, DES-CBC, AES-ECB,
AES-CBC, AES-CTR, AES-Key, AES-GCM and AES-CCM.
This parameter can be a value of @ref CRYP_Algorithm_Mode */
uint32_t CRYP_DataType; /*!< 32-bit data, 16-bit data, bit data or bit string.
This parameter can be a value of @ref CRYP_Data_Type */
uint16_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit
uint32_t CRYP_KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit
key length. This parameter can be a value of
@ref CRYP_Key_Size_for_AES_only */
}CRYP_InitTypeDef;
......@@ -88,14 +94,14 @@ typedef struct
*/
typedef struct
{
/*!< Configuration */
uint32_t CR_bits9to2;
/*!< KEY */
/*!< Current Configuration */
uint32_t CR_CurrentConfig;
/*!< IV */
uint32_t CRYP_IV0LR;
uint32_t CRYP_IV0RR;
uint32_t CRYP_IV1LR;
uint32_t CRYP_IV1RR;
/*!< IV */
/*!< KEY */
uint32_t CRYP_K0LR;
uint32_t CRYP_K0RR;
uint32_t CRYP_K1LR;
......@@ -104,6 +110,8 @@ typedef struct
uint32_t CRYP_K2RR;
uint32_t CRYP_K3LR;
uint32_t CRYP_K3RR;
uint32_t CRYP_CSGCMCCMR[8];
uint32_t CRYP_CSGCMR[8];
}CRYP_Context;
......@@ -130,31 +138,54 @@ typedef struct
*/
/*!< TDES Modes */
#define CRYP_AlgoMode_TDES_ECB ((uint16_t)0x0000)
#define CRYP_AlgoMode_TDES_CBC ((uint16_t)0x0008)
#define CRYP_AlgoMode_TDES_ECB ((uint32_t)0x00000000)
#define CRYP_AlgoMode_TDES_CBC ((uint32_t)0x00000008)
/*!< DES Modes */
#define CRYP_AlgoMode_DES_ECB ((uint16_t)0x0010)
#define CRYP_AlgoMode_DES_CBC ((uint16_t)0x0018)
#define CRYP_AlgoMode_DES_ECB ((uint32_t)0x00000010)
#define CRYP_AlgoMode_DES_CBC ((uint32_t)0x00000018)
/*!< AES Modes */
#define CRYP_AlgoMode_AES_ECB ((uint16_t)0x0020)
#define CRYP_AlgoMode_AES_CBC ((uint16_t)0x0028)
#define CRYP_AlgoMode_AES_CTR ((uint16_t)0x0030)
#define CRYP_AlgoMode_AES_Key ((uint16_t)0x0038)
#define CRYP_AlgoMode_AES_ECB ((uint32_t)0x00000020)
#define CRYP_AlgoMode_AES_CBC ((uint32_t)0x00000028)
#define CRYP_AlgoMode_AES_CTR ((uint32_t)0x00000030)
#define CRYP_AlgoMode_AES_Key ((uint32_t)0x00000038)
#define CRYP_AlgoMode_AES_GCM ((uint32_t)0x00080000)
#define CRYP_AlgoMode_AES_CCM ((uint32_t)0x00080008)
#define IS_CRYP_ALGOMODE(ALGOMODE) (((ALGOMODE) == CRYP_AlgoMode_TDES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_TDES_CBC)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_ECB)|| \
((ALGOMODE) == CRYP_AlgoMode_DES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_DES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_ECB) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CBC) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CTR) || \
((ALGOMODE) == CRYP_AlgoMode_AES_Key))
((ALGOMODE) == CRYP_AlgoMode_AES_Key) || \
((ALGOMODE) == CRYP_AlgoMode_AES_GCM) || \
((ALGOMODE) == CRYP_AlgoMode_AES_CCM))
/**
* @}
*/
/** @defgroup CRYP_Phase
* @{
*/
/*!< The phases are valid only for AES-GCM and AES-CCM modes */
#define CRYP_Phase_Init ((uint32_t)0x00000000)
#define CRYP_Phase_Header CRYP_CR_GCM_CCMPH_0
#define CRYP_Phase_Payload CRYP_CR_GCM_CCMPH_1
#define CRYP_Phase_Final CRYP_CR_GCM_CCMPH
#define IS_CRYP_PHASE(PHASE) (((PHASE) == CRYP_Phase_Init) || \
((PHASE) == CRYP_Phase_Header) || \
((PHASE) == CRYP_Phase_Payload) || \
((PHASE) == CRYP_Phase_Final))
/**
* @}
*/
/** @defgroup CRYP_Data_Type
* @{
*/
......@@ -260,23 +291,24 @@ void CRYP_KeyStructInit(CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_IVInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_IVStructInit(CRYP_IVInitTypeDef* CRYP_IVInitStruct);
void CRYP_Cmd(FunctionalState NewState);
void CRYP_PhaseConfig(uint32_t CRYP_Phase);
void CRYP_FIFOFlush(void);
/* CRYP Data processing functions *********************************************/
void CRYP_DataIn(uint32_t Data);
uint32_t CRYP_DataOut(void);
void CRYP_FIFOFlush(void);
/* CRYP Context swapping functions ********************************************/
ErrorStatus CRYP_SaveContext(CRYP_Context* CRYP_ContextSave,
CRYP_KeyInitTypeDef* CRYP_KeyInitStruct);
void CRYP_RestoreContext(CRYP_Context* CRYP_ContextRestore);
/* CRYP's DMA interface function **********************************************/
/* CRYP DMA interface function ************************************************/
void CRYP_DMACmd(uint8_t CRYP_DMAReq, FunctionalState NewState);
/* Interrupts and flags management functions **********************************/
void CRYP_ITConfig(uint8_t CRYP_IT, FunctionalState NewState);
ITStatus CRYP_GetITStatus(uint8_t CRYP_IT);
FunctionalState CRYP_GetCmdStatus(void);
FlagStatus CRYP_GetFlagStatus(uint8_t CRYP_FLAG);
/* High Level AES functions **************************************************/
......@@ -297,6 +329,20 @@ ErrorStatus CRYP_AES_CTR(uint8_t Mode,
uint8_t *Input, uint32_t Ilength,
uint8_t *Output);
ErrorStatus CRYP_AES_GCM(uint8_t Mode, uint8_t InitVectors[16],
uint8_t *Key, uint16_t Keysize,
uint8_t *Input, uint32_t ILength,
uint8_t *Header, uint32_t HLength,
uint8_t *Output, uint8_t *AuthTAG);
ErrorStatus CRYP_AES_CCM(uint8_t Mode,
uint8_t* Nonce, uint32_t NonceSize,
uint8_t* Key, uint16_t Keysize,
uint8_t* Input, uint32_t ILength,
uint8_t* Header, uint32_t HLength, uint8_t *HBuffer,
uint8_t* Output,
uint8_t* AuthTAG, uint32_t TAGSize);
/* High Level TDES functions **************************************************/
ErrorStatus CRYP_TDES_ECB(uint8_t Mode,
uint8_t Key[24],
......@@ -335,4 +381,4 @@ ErrorStatus CRYP_DES_CBC(uint8_t Mode,
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dac.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_dac.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the DAC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -295,4 +301,4 @@ void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dbgmcu.h
浏览文件 @ 715cbb78
......@@ -2,20 +2,26 @@
******************************************************************************
* @file stm32f4xx_dbgmcu.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the DBGMCU firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -100,4 +106,4 @@ void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dcmi.h
浏览文件 @ 715cbb78
......@@ -2,20 +2,26 @@
******************************************************************************
* @file stm32f4xx_dcmi.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the DCMI firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -303,4 +309,4 @@ void DCMI_ClearITPendingBit(uint16_t DCMI_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dma.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_dma.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the DMA firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -393,7 +399,7 @@ typedef struct
#define DMA_FLAG_TCIF7 ((uint32_t)0x28000000)
#define IS_DMA_CLEAR_FLAG(FLAG) ((((FLAG) & 0x30000000) != 0x30000000) && (((FLAG) & 0x30000000) != 0) && \
(((FLAG) & 0xC082F082) == 0x00) && ((FLAG) != 0x00))
(((FLAG) & 0xC002F082) == 0x00) && ((FLAG) != 0x00))
#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA_FLAG_TCIF0) || ((FLAG) == DMA_FLAG_HTIF0) || \
((FLAG) == DMA_FLAG_TEIF0) || ((FLAG) == DMA_FLAG_DMEIF0) || \
......@@ -600,4 +606,4 @@ void DMA_ClearITPendingBit(DMA_Stream_TypeDef* DMAy_Streamx, uint32_t DMA_IT);
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_dma2d.h 0 → 100644
浏览文件 @ 715cbb78
/**
******************************************************************************
* @file stm32f4xx_dma2d.h
* @author MCD Application Team
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the DMA2D firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_DMA2D_H
#define __STM32F4xx_DMA2D_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @addtogroup DMA2D
* @{
*/
/* Exported types ------------------------------------------------------------*/
/**
* @brief DMA2D Init structure definition
*/
typedef struct
{
uint32_t DMA2D_Mode; /*!< configures the DMA2D transfer mode.
This parameter can be one value of @ref DMA2D_MODE */
uint32_t DMA2D_CMode; /*!< configures the color format of the output image.
This parameter can be one value of @ref DMA2D_CMODE */
uint32_t DMA2D_OutputBlue; /*!< configures the blue value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0xFF if RGB888 color mode is slected
- from 0x00 to 0x1F if RGB565 color mode is slected
- from 0x00 to 0x1F if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputGreen; /*!< configures the green value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0xFF if RGB888 color mode is slected
- from 0x00 to 0x2F if RGB565 color mode is slected
- from 0x00 to 0x1F if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputRed; /*!< configures the red value of the output image.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0xFF if RGB888 color mode is slected
- from 0x00 to 0x1F if RGB565 color mode is slected
- from 0x00 to 0x1F if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputAlpha; /*!< configures the alpha channel of the output color.
This parameter must range:
- from 0x00 to 0xFF if ARGB8888 color mode is slected
- from 0x00 to 0x01 if ARGB1555 color mode is slected
- from 0x00 to 0x0F if ARGB4444 color mode is slected */
uint32_t DMA2D_OutputMemoryAdd; /*!< Specifies the memory address. This parameter
must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_OutputOffset; /*!< Specifies the Offset value. This parameter must be range from
0x0000 to 0x3FFF. */
uint32_t DMA2D_NumberOfLine; /*!< Configures the number of line of the area to be transfered.
This parameter must range from 0x0000 to 0xFFFF */
uint32_t DMA2D_PixelPerLine; /*!< Configures the number pixel per line of the area to be transfered.
This parameter must range from 0x0000 to 0x3FFF */
} DMA2D_InitTypeDef;
typedef struct
{
uint32_t DMA2D_FGMA; /*!< configures the DMA2D foreground memory address.
This parameter must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_FGO; /*!< configures the DMA2D foreground offset.
This parameter must be range from 0x0000 to 0x3FFF. */
uint32_t DMA2D_FGCM; /*!< configures the DMA2D foreground color mode .
This parameter can be one value of @ref DMA2D_FGCM */
uint32_t DMA2D_FG_CLUT_CM; /*!< configures the DMA2D foreground CLUT color mode.
This parameter can be one value of @ref DMA2D_FG_CLUT_CM */
uint32_t DMA2D_FG_CLUT_SIZE; /*!< configures the DMA2D foreground CLUT size.
This parameter must range from 0x00 to 0xFF. */
uint32_t DMA2D_FGPFC_ALPHA_MODE; /*!< configures the DMA2D foreground alpha mode.
This parameter can be one value of @ref DMA2D_FGPFC_ALPHA_MODE */
uint32_t DMA2D_FGPFC_ALPHA_VALUE; /*!< Specifies the DMA2D foreground alpha value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_BLUE; /*!< Specifies the DMA2D foreground blue value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_GREEN; /*!< Specifies the DMA2D foreground green value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGC_RED; /*!< Specifies the DMA2D foreground red value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_FGCMAR; /*!< Configures the DMA2D foreground CLUT memory address.
This parameter must range from 0x00000000 to 0xFFFFFFFF. */
} DMA2D_FG_InitTypeDef;
typedef struct
{
uint32_t DMA2D_BGMA; /*!< configures the DMA2D background memory address.
This parameter must be range from 0x00000000 to 0xFFFFFFFF. */
uint32_t DMA2D_BGO; /*!< configures the DMA2D background offset.
This parameter must be range from 0x0000 to 0x3FFF. */
uint32_t DMA2D_BGCM; /*!< configures the DMA2D background color mode .
This parameter can be one value of @ref DMA2D_FGCM */
uint32_t DMA2D_BG_CLUT_CM; /*!< configures the DMA2D background CLUT color mode.
This parameter can be one value of @ref DMA2D_FG_CLUT_CM */
uint32_t DMA2D_BG_CLUT_SIZE; /*!< configures the DMA2D background CLUT size.
This parameter must range from 0x00 to 0xFF. */
uint32_t DMA2D_BGPFC_ALPHA_MODE; /*!< configures the DMA2D background alpha mode.
This parameter can be one value of @ref DMA2D_FGPFC_ALPHA_MODE */
uint32_t DMA2D_BGPFC_ALPHA_VALUE; /*!< Specifies the DMA2D background alpha value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_BLUE; /*!< Specifies the DMA2D background blue value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_GREEN; /*!< Specifies the DMA2D background green value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGC_RED; /*!< Specifies the DMA2D background red value
must be range from 0x00 to 0xFF. */
uint32_t DMA2D_BGCMAR; /*!< Configures the DMA2D background CLUT memory address.
This parameter must range from 0x00000000 to 0xFFFFFFFF. */
} DMA2D_BG_InitTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup DMA2D_Exported_Constants
* @{
*/
/** @defgroup DMA2D_MODE
* @{
*/
#define DMA2D_M2M ((uint32_t)0x00000000)
#define DMA2D_M2M_PFC ((uint32_t)0x00010000)
#define DMA2D_M2M_BLEND ((uint32_t)0x00020000)
#define DMA2D_R2M ((uint32_t)0x00030000)
#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
/**
* @}
*/
/** @defgroup DMA2D_CMODE
* @{
*/
#define DMA2D_ARGB8888 ((uint32_t)0x00000000)
#define DMA2D_RGB888 ((uint32_t)0x00000001)
#define DMA2D_RGB565 ((uint32_t)0x00000002)
#define DMA2D_ARGB1555 ((uint32_t)0x00000003)
#define DMA2D_ARGB4444 ((uint32_t)0x00000004)
#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
((MODE_ARGB) == DMA2D_ARGB4444))
/**
* @}
*/
/** @defgroup DMA2D_OUTPUT_COLOR
* @{
*/
#define DMA2D_Output_Color ((uint32_t)0x000000FF)
#define IS_DMA2D_OGREEN(OGREEN) ((OGREEN) <= DMA2D_Output_Color)
#define IS_DMA2D_ORED(ORED) ((ORED) <= DMA2D_Output_Color)
#define IS_DMA2D_OBLUE(OBLUE) ((OBLUE) <= DMA2D_Output_Color)
#define IS_DMA2D_OALPHA(OALPHA) ((OALPHA) <= DMA2D_Output_Color)
/**
* @}
*/
/** @defgroup DMA2D_OUTPUT_OFFSET
* @{
*/
#define DMA2D_OUTPUT_OFFSET ((uint32_t)0x00003FFF)
#define IS_DMA2D_OUTPUT_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OUTPUT_OFFSET)
/**
* @}
*/
/** @defgroup DMA2D_SIZE
* @{
*/
#define DMA2D_pixel ((uint32_t)0x00003FFF)
#define DMA2D_Line ((uint32_t)0x0000FFFF)
#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_Line)
#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_pixel)
/**
* @}
*/
/** @defgroup DMA2D_OFFSET
* @{
*/
#define OFFSET ((uint32_t)0x00003FFF)
#define IS_DMA2D_FGO(FGO) ((FGO) <= OFFSET)
#define IS_DMA2D_BGO(BGO) ((BGO) <= OFFSET)
/**
* @}
*/
/** @defgroup DMA2D_FGCM
* @{
*/
#define CM_ARGB8888 ((uint32_t)0x00000000)
#define CM_RGB888 ((uint32_t)0x00000001)
#define CM_RGB565 ((uint32_t)0x00000002)
#define CM_ARGB1555 ((uint32_t)0x00000003)
#define CM_ARGB4444 ((uint32_t)0x00000004)
#define CM_L8 ((uint32_t)0x00000005)
#define CM_AL44 ((uint32_t)0x00000006)
#define CM_AL88 ((uint32_t)0x00000007)
#define CM_L4 ((uint32_t)0x00000008)
#define CM_A8 ((uint32_t)0x00000009)
#define CM_A4 ((uint32_t)0x0000000A)
#define IS_DMA2D_FGCM(FGCM) (((FGCM) == CM_ARGB8888) || ((FGCM) == CM_RGB888) || \
((FGCM) == CM_RGB565) || ((FGCM) == CM_ARGB1555) || \
((FGCM) == CM_ARGB4444) || ((FGCM) == CM_L8) || \
((FGCM) == CM_AL44) || ((FGCM) == CM_AL88) || \
((FGCM) == CM_L4) || ((FGCM) == CM_A8) || \
((FGCM) == CM_A4))
#define IS_DMA2D_BGCM(BGCM) (((BGCM) == CM_ARGB8888) || ((BGCM) == CM_RGB888) || \
((BGCM) == CM_RGB565) || ((BGCM) == CM_ARGB1555) || \
((BGCM) == CM_ARGB4444) || ((BGCM) == CM_L8) || \
((BGCM) == CM_AL44) || ((BGCM) == CM_AL88) || \
((BGCM) == CM_L4) || ((BGCM) == CM_A8) || \
((BGCM) == CM_A4))
/**
* @}
*/
/** @defgroup DMA2D_FG_CLUT_CM
* @{
*/
#define CLUT_CM_ARGB8888 ((uint32_t)0x00000000)
#define CLUT_CM_RGB888 ((uint32_t)0x00000001)
#define IS_DMA2D_FG_CLUT_CM(FG_CLUT_CM) (((FG_CLUT_CM) == CLUT_CM_ARGB8888) || ((FG_CLUT_CM) == CLUT_CM_RGB888))
#define IS_DMA2D_BG_CLUT_CM(BG_CLUT_CM) (((BG_CLUT_CM) == CLUT_CM_ARGB8888) || ((BG_CLUT_CM) == CLUT_CM_RGB888))
/**
* @}
*/
/** @defgroup DMA2D_FG_COLOR_VALUE
* @{
*/
#define COLOR_VALUE ((uint32_t)0x000000FF)
#define IS_DMA2D_FG_CLUT_SIZE(FG_CLUT_SIZE) ((FG_CLUT_SIZE) <= COLOR_VALUE)
#define IS_DMA2D_FG_ALPHA_VALUE(FG_ALPHA_VALUE) ((FG_ALPHA_VALUE) <= COLOR_VALUE)
#define IS_DMA2D_FGC_BLUE(FGC_BLUE) ((FGC_BLUE) <= COLOR_VALUE)
#define IS_DMA2D_FGC_GREEN(FGC_GREEN) ((FGC_GREEN) <= COLOR_VALUE)
#define IS_DMA2D_FGC_RED(FGC_RED) ((FGC_RED) <= COLOR_VALUE)
#define IS_DMA2D_BG_CLUT_SIZE(BG_CLUT_SIZE) ((BG_CLUT_SIZE) <= COLOR_VALUE)
#define IS_DMA2D_BG_ALPHA_VALUE(BG_ALPHA_VALUE) ((BG_ALPHA_VALUE) <= COLOR_VALUE)
#define IS_DMA2D_BGC_BLUE(BGC_BLUE) ((BGC_BLUE) <= COLOR_VALUE)
#define IS_DMA2D_BGC_GREEN(BGC_GREEN) ((BGC_GREEN) <= COLOR_VALUE)
#define IS_DMA2D_BGC_RED(BGC_RED) ((BGC_RED) <= COLOR_VALUE)
/**
* @}
*/
/** DMA2D_FGPFC_ALPHA_MODE
* @{
*/
#define NO_MODIF_ALPHA_VALUE ((uint32_t)0x00000000)
#define REPLACE_ALPHA_VALUE ((uint32_t)0x00000001)
#define COMBINE_ALPHA_VALUE ((uint32_t)0x00000002)
#define IS_DMA2D_FG_ALPHA_MODE(FG_ALPHA_MODE) (((FG_ALPHA_MODE) == NO_MODIF_ALPHA_VALUE) || \
((FG_ALPHA_MODE) == REPLACE_ALPHA_VALUE) || \
((FG_ALPHA_MODE) == COMBINE_ALPHA_VALUE))
#define IS_DMA2D_BG_ALPHA_MODE(BG_ALPHA_MODE) (((BG_ALPHA_MODE) == NO_MODIF_ALPHA_VALUE) || \
((BG_ALPHA_MODE) == REPLACE_ALPHA_VALUE) || \
((BG_ALPHA_MODE) == COMBINE_ALPHA_VALUE))
/**
* @}
*/
/** @defgroup DMA2D_Interrupts
* @{
*/
#define DMA2D_IT_CE DMA2D_CR_CEIE
#define DMA2D_IT_CTC DMA2D_CR_CTCIE
#define DMA2D_IT_CAE DMA2D_CR_CAEIE
#define DMA2D_IT_TW DMA2D_CR_TWIE
#define DMA2D_IT_TC DMA2D_CR_TCIE
#define DMA2D_IT_TE DMA2D_CR_TEIE
#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
/**
* @}
*/
/** @defgroup DMA2D_Flag
* @{
*/
#define DMA2D_FLAG_CE DMA2D_ISR_CEIF
#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF
#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF
#define DMA2D_FLAG_TW DMA2D_ISR_TWIF
#define DMA2D_FLAG_TC DMA2D_ISR_TCIF
#define DMA2D_FLAG_TE DMA2D_ISR_TEIF
#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
/**
* @}
*/
/** @defgroup DMA2D_DeadTime
* @{
*/
#define DEADTIME ((uint32_t)0x000000FF)
#define IS_DMA2D_DEAD_TIME(DEAD_TIME) ((DEAD_TIME) <= DEADTIME)
#define LINE_WATERMARK DMA2D_LWR_LW
#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
/* Function used to set the DMA2D configuration to the default reset state *****/
void DMA2D_DeInit(void);
/* Initialization and Configuration functions *********************************/
void DMA2D_Init(DMA2D_InitTypeDef* DMA2D_InitStruct);
void DMA2D_StructInit(DMA2D_InitTypeDef* DMA2D_InitStruct);
void DMA2D_StartTransfer(void);
void DMA2D_AbortTransfer(void);
void DMA2D_Suspend(FunctionalState NewState);
void DMA2D_FGConfig(DMA2D_FG_InitTypeDef* DMA2D_FG_InitStruct);
void DMA2D_FG_StructInit(DMA2D_FG_InitTypeDef* DMA2D_FG_InitStruct);
void DMA2D_BGConfig(DMA2D_BG_InitTypeDef* DMA2D_BG_InitStruct);
void DMA2D_BG_StructInit(DMA2D_BG_InitTypeDef* DMA2D_BG_InitStruct);
void DMA2D_FGStart(FunctionalState NewState);
void DMA2D_BGStart(FunctionalState NewState);
void DMA2D_DeadTimeConfig(uint32_t DMA2D_DeadTime, FunctionalState NewState);
void DMA2D_LineWatermarkConfig(uint32_t DMA2D_LWatermarkConfig);
/* Interrupts and flags management functions **********************************/
void DMA2D_ITConfig(uint32_t DMA2D_IT, FunctionalState NewState);
FlagStatus DMA2D_GetFlagStatus(uint32_t DMA2D_FLAG);
void DMA2D_ClearFlag(uint32_t DMA2D_FLAG);
ITStatus DMA2D_GetITStatus(uint32_t DMA2D_IT);
void DMA2D_ClearITPendingBit(uint32_t DMA2D_IT);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_DMA2D_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_exti.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_exti.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the EXTI firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -174,4 +180,4 @@ void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_gpio.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_gpio.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the GPIO firmware
* library.
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -49,8 +55,10 @@
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG) || \
((PERIPH) == GPIOH) || \
((PERIPH) == GPIOI))
((PERIPH) == GPIOI) || \
((PERIPH) == GPIOJ) || \
((PERIPH) == GPIOK))
/**
* @brief GPIO Configuration Mode enumeration
*/
......@@ -80,13 +88,20 @@ typedef enum
*/
typedef enum
{
GPIO_Speed_2MHz = 0x00, /*!< Low speed */
GPIO_Speed_25MHz = 0x01, /*!< Medium speed */
GPIO_Speed_50MHz = 0x02, /*!< Fast speed */
GPIO_Speed_100MHz = 0x03 /*!< High speed on 30 pF (80 MHz Output max speed on 15 pF) */
GPIO_Low_Speed = 0x00, /*!< Low speed */
GPIO_Medium_Speed = 0x01, /*!< Medium speed */
GPIO_Fast_Speed = 0x02, /*!< Fast speed */
GPIO_High_Speed = 0x03 /*!< High speed */
}GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_2MHz) || ((SPEED) == GPIO_Speed_25MHz) || \
((SPEED) == GPIO_Speed_50MHz)|| ((SPEED) == GPIO_Speed_100MHz))
/* Add legacy definition */
#define GPIO_Speed_2MHz GPIO_Low_Speed
#define GPIO_Speed_25MHz GPIO_Medium_Speed
#define GPIO_Speed_50MHz GPIO_Fast_Speed
#define GPIO_Speed_100MHz GPIO_High_Speed
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Low_Speed) || ((SPEED) == GPIO_Medium_Speed) || \
((SPEED) == GPIO_Fast_Speed)|| ((SPEED) == GPIO_High_Speed))
/**
* @brief GPIO Configuration PullUp PullDown enumeration
......@@ -264,38 +279,48 @@ typedef struct
/**
* @brief AF 5 selection
*/
#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
#define GPIO_AF_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
#define GPIO_AF_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
#define GPIO_AF_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
/**
* @brief AF 6 selection
*/
#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
#define GPIO_AF_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
/**
* @brief AF 7 selection
*/
#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
#define GPIO_AF_I2S3ext ((uint8_t)0x07) /* I2S3ext Alternate Function mapping */
/**
* @brief AF 8 selection
*/
#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
#define GPIO_AF_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
#define GPIO_AF_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
/**
* @brief AF 9 selection
*/
#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping (Only for STM32F401xx Devices) */
#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping (Only for STM32F401xx Devices) */
/**
* @brief AF 10 selection
*/
......@@ -310,38 +335,96 @@ typedef struct
/**
* @brief AF 12 selection
*/
#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
#if defined (STM32F40_41xxx)
#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
#endif /* STM32F40_41xxx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define GPIO_AF_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
#endif /* STM32F427_437xx || STM32F429_439xx */
#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
/**
* @brief AF 13 selection
*/
#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
/**
* @brief AF 14 selection
*/
#define GPIO_AF_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
/**
* @brief AF 15 selection
*/
#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_FSMC) || \
((AF) == GPIO_AF_OTG_HS_FS) || ((AF) == GPIO_AF_SDIO) || \
((AF) == GPIO_AF_DCMI) || ((AF) == GPIO_AF_EVENTOUT))
#if defined (STM32F40_41xxx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_FSMC))
#endif /* STM32F40_41xxx */
#if defined (STM32F401xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4))
#endif /* STM32F401xx */
#if defined (STM32F427_437xx) || defined (STM32F429_439xx)
#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_OTG_HS_FS) || \
((AF) == GPIO_AF_SDIO) || ((AF) == GPIO_AF_DCMI) || \
((AF) == GPIO_AF_EVENTOUT) || ((AF) == GPIO_AF_SPI4) || \
((AF) == GPIO_AF_SPI5) || ((AF) == GPIO_AF_SPI6) || \
((AF) == GPIO_AF_UART7) || ((AF) == GPIO_AF_UART8) || \
((AF) == GPIO_AF_FMC) || ((AF) == GPIO_AF_SAI1) || \
((AF) == GPIO_AF_LTDC))
#endif /* STM32F427_437xx || STM32F429_439xx */
/**
* @}
*/
......@@ -403,4 +486,4 @@ void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_hash.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_hash.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the HASH
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -46,12 +52,12 @@
*/
typedef struct
{
uint32_t HASH_AlgoSelection; /*!< SHA-1 or MD5. This parameter can be a value
of @ref HASH_Algo_Selection */
uint32_t HASH_AlgoSelection; /*!< SHA-1, SHA-224, SHA-256 or MD5. This parameter
can be a value of @ref HASH_Algo_Selection */
uint32_t HASH_AlgoMode; /*!< HASH or HMAC. This parameter can be a value
of @ref HASH_processor_Algorithm_Mode */
uint32_t HASH_DataType; /*!< 32-bit data, 16-bit data, 8-bit data or
bit-string. This parameter can be a value of
bit string. This parameter can be a value of
@ref HASH_Data_Type */
uint32_t HASH_HMACKeyType; /*!< HMAC Short key or HMAC Long Key. This parameter
can be a value of @ref HASH_HMAC_Long_key_only_for_HMAC_mode */
......@@ -62,7 +68,9 @@ typedef struct
*/
typedef struct
{
uint32_t Data[5]; /*!< Message digest result : 5x 32bit words for SHA1 or
uint32_t Data[8]; /*!< Message digest result : 8x 32bit wors for SHA-256,
7x 32bit wors for SHA-224,
5x 32bit words for SHA-1 or
4x 32bit words for MD5 */
} HASH_MsgDigest;
......@@ -74,7 +82,7 @@ typedef struct
uint32_t HASH_IMR;
uint32_t HASH_STR;
uint32_t HASH_CR;
uint32_t HASH_CSR[51];
uint32_t HASH_CSR[54];
}HASH_Context;
/* Exported constants --------------------------------------------------------*/
......@@ -86,10 +94,14 @@ typedef struct
/** @defgroup HASH_Algo_Selection
* @{
*/
#define HASH_AlgoSelection_SHA1 ((uint16_t)0x0000) /*!< HASH function is SHA1 */
#define HASH_AlgoSelection_MD5 ((uint16_t)0x0080) /*!< HASH function is MD5 */
#define HASH_AlgoSelection_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */
#define HASH_AlgoSelection_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
#define HASH_AlgoSelection_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
#define HASH_AlgoSelection_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
((ALGOSELECTION) == HASH_AlgoSelection_SHA224) || \
((ALGOSELECTION) == HASH_AlgoSelection_SHA256) || \
((ALGOSELECTION) == HASH_AlgoSelection_MD5))
/**
* @}
......@@ -98,8 +110,8 @@ typedef struct
/** @defgroup HASH_processor_Algorithm_Mode
* @{
*/
#define HASH_AlgoMode_HASH ((uint16_t)0x0000) /*!< Algorithm is HASH */
#define HASH_AlgoMode_HMAC ((uint16_t)0x0040) /*!< Algorithm is HMAC */
#define HASH_AlgoMode_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */
#define HASH_AlgoMode_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
((ALGOMODE) == HASH_AlgoMode_HMAC))
......@@ -110,14 +122,14 @@ typedef struct
/** @defgroup HASH_Data_Type
* @{
*/
#define HASH_DataType_32b ((uint16_t)0x0000)
#define HASH_DataType_16b ((uint16_t)0x0010)
#define HASH_DataType_8b ((uint16_t)0x0020)
#define HASH_DataType_1b ((uint16_t)0x0030)
#define HASH_DataType_32b ((uint32_t)0x0000) /*!< 32-bit data. No swapping */
#define HASH_DataType_16b HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
#define HASH_DataType_8b HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
#define HASH_DataType_1b HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DataType_32b)|| \
((DATATYPE) == HASH_DataType_16b)|| \
((DATATYPE) == HASH_DataType_8b)|| \
((DATATYPE) == HASH_DataType_8b) || \
((DATATYPE) == HASH_DataType_1b))
/**
* @}
......@@ -127,10 +139,10 @@ typedef struct
* @{
*/
#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
#define HASH_HMACKeyType_LongKey ((uint32_t)0x00010000) /*!< HMAC Key is > 64 bytes */
#define HASH_HMACKeyType_LongKey HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
((KEYTYPE) == HASH_HMACKeyType_LongKey))
((KEYTYPE) == HASH_HMACKeyType_LongKey))
/**
* @}
*/
......@@ -147,10 +159,10 @@ typedef struct
/** @defgroup HASH_interrupts_definition
* @{
*/
#define HASH_IT_DINI ((uint8_t)0x01) /*!< A new block can be entered into the input buffer (DIN)*/
#define HASH_IT_DCI ((uint8_t)0x02) /*!< Digest calculation complete */
#define HASH_IT_DINI HASH_IMR_DINIM /*!< A new block can be entered into the input buffer (DIN) */
#define HASH_IT_DCI HASH_IMR_DCIM /*!< Digest calculation complete */
#define IS_HASH_IT(IT) ((((IT) & (uint8_t)0xFC) == 0x00) && ((IT) != 0x00))
#define IS_HASH_IT(IT) ((((IT) & (uint32_t)0xFFFFFFFC) == 0x00000000) && ((IT) != 0x00000000))
#define IS_HASH_GET_IT(IT) (((IT) == HASH_IT_DINI) || ((IT) == HASH_IT_DCI))
/**
......@@ -160,11 +172,11 @@ typedef struct
/** @defgroup HASH_flags_definition
* @{
*/
#define HASH_FLAG_DINIS ((uint16_t)0x0001) /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer.*/
#define HASH_FLAG_DCIS ((uint16_t)0x0002) /*!< Digest calculation complete */
#define HASH_FLAG_DMAS ((uint16_t)0x0004) /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
#define HASH_FLAG_BUSY ((uint16_t)0x0008) /*!< The hash core is Busy : processing a block of data */
#define HASH_FLAG_DINNE ((uint16_t)0x1000) /*!< DIN not empty : The input buffer contains at least one word of data */
#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
#define IS_HASH_GET_FLAG(FLAG) (((FLAG) == HASH_FLAG_DINIS) || \
((FLAG) == HASH_FLAG_DCIS) || \
......@@ -199,21 +211,22 @@ void HASH_DataIn(uint32_t Data);
uint8_t HASH_GetInFIFOWordsNbr(void);
void HASH_SetLastWordValidBitsNbr(uint16_t ValidNumber);
void HASH_StartDigest(void);
void HASH_AutoStartDigest(FunctionalState NewState);
void HASH_GetDigest(HASH_MsgDigest* HASH_MessageDigest);
/* HASH Context swapping functions ********************************************/
void HASH_SaveContext(HASH_Context* HASH_ContextSave);
void HASH_RestoreContext(HASH_Context* HASH_ContextRestore);
/* HASH's DMA interface function **********************************************/
/* HASH DMA interface function ************************************************/
void HASH_DMACmd(FunctionalState NewState);
/* HASH Interrupts and flags management functions *****************************/
void HASH_ITConfig(uint8_t HASH_IT, FunctionalState NewState);
FlagStatus HASH_GetFlagStatus(uint16_t HASH_FLAG);
void HASH_ClearFlag(uint16_t HASH_FLAG);
ITStatus HASH_GetITStatus(uint8_t HASH_IT);
void HASH_ClearITPendingBit(uint8_t HASH_IT);
void HASH_ITConfig(uint32_t HASH_IT, FunctionalState NewState);
FlagStatus HASH_GetFlagStatus(uint32_t HASH_FLAG);
void HASH_ClearFlag(uint32_t HASH_FLAG);
ITStatus HASH_GetITStatus(uint32_t HASH_IT);
void HASH_ClearITPendingBit(uint32_t HASH_IT);
/* High Level SHA1 functions **************************************************/
ErrorStatus HASH_SHA1(uint8_t *Input, uint32_t Ilen, uint8_t Output[20]);
......@@ -241,4 +254,4 @@ ErrorStatus HMAC_MD5(uint8_t *Key, uint32_t Keylen,
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_i2c.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_i2c.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the I2C firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -76,6 +82,17 @@ typedef struct
#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
((PERIPH) == I2C2) || \
((PERIPH) == I2C3))
/** @defgroup I2C_Digital_Filter
* @{
*/
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
/**
* @}
*/
/** @defgroup I2C_mode
* @{
*/
......@@ -534,6 +551,8 @@ void I2C_DeInit(I2C_TypeDef* I2Cx);
void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_DigitalFilterConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DigitalFilter);
void I2C_AnalogFilterCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
......@@ -689,4 +708,4 @@ void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_iwdg.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_iwdg.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the IWDG
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -122,4 +128,4 @@ FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_pwr.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_pwr.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the PWR firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -49,7 +55,6 @@
/** @defgroup PWR_PVD_detection_level
* @{
*/
#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0
#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1
#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2
......@@ -71,31 +76,52 @@
/** @defgroup PWR_Regulator_state_in_STOP_mode
* @{
*/
#define PWR_MainRegulator_ON ((uint32_t)0x00000000)
#define PWR_LowPowerRegulator_ON PWR_CR_LPDS
/* --- PWR_Legacy ---*/
#define PWR_Regulator_ON PWR_MainRegulator_ON
#define PWR_Regulator_LowPower PWR_LowPowerRegulator_ON
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MainRegulator_ON) || \
((REGULATOR) == PWR_LowPowerRegulator_ON))
#define PWR_Regulator_ON ((uint32_t)0x00000000)
#define PWR_Regulator_LowPower PWR_CR_LPDS
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
((REGULATOR) == PWR_Regulator_LowPower))
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry
/** @defgroup PWR_Regulator_state_in_UnderDrive_mode
* @{
*/
#define PWR_MainRegulator_UnderDrive_ON PWR_CR_MRUDS
#define PWR_LowPowerRegulator_UnderDrive_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MainRegulator_UnderDrive_ON) || \
((REGULATOR) == PWR_LowPowerRegulator_UnderDrive_ON))
/**
* @}
*/
/** @defgroup PWR_STOP_mode_entry
* @{
*/
#define PWR_STOPEntry_WFI ((uint8_t)0x01)
#define PWR_STOPEntry_WFE ((uint8_t)0x02)
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
/**
* @}
*/
/** @defgroup PWR_Regulator_Voltage_Scale
* @{
*/
#define PWR_Regulator_Voltage_Scale1 ((uint32_t)0x00004000)
#define PWR_Regulator_Voltage_Scale2 ((uint32_t)0x00000000)
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || ((VOLTAGE) == PWR_Regulator_Voltage_Scale2))
#define PWR_Regulator_Voltage_Scale1 ((uint32_t)0x0000C000)
#define PWR_Regulator_Voltage_Scale2 ((uint32_t)0x00008000)
#define PWR_Regulator_Voltage_Scale3 ((uint32_t)0x00004000)
#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_Regulator_Voltage_Scale1) || \
((VOLTAGE) == PWR_Regulator_Voltage_Scale2) || \
((VOLTAGE) == PWR_Regulator_Voltage_Scale3))
/**
* @}
*/
......@@ -103,26 +129,27 @@
/** @defgroup PWR_Flag
* @{
*/
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_BRR PWR_CSR_BRR
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
/** @defgroup PWR_Flag_Legacy
* @{
*/
/* --- FLAG Legacy ---*/
#define PWR_FLAG_REGRDY PWR_FLAG_VOSRDY
/**
* @}
*/
#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_BRR) || \
((FLAG) == PWR_FLAG_VOSRDY))
((FLAG) == PWR_FLAG_VOSRDY) || ((FLAG) == PWR_FLAG_ODRDY) || \
((FLAG) == PWR_FLAG_ODSWRDY) || ((FLAG) == PWR_FLAG_UDRDY))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
((FLAG) == PWR_FLAG_UDRDY))
#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
/**
* @}
*/
......@@ -150,12 +177,16 @@ void PWR_WakeUpPinCmd(FunctionalState NewState);
/* Main and Backup Regulators configuration functions *************************/
void PWR_BackupRegulatorCmd(FunctionalState NewState);
void PWR_MainRegulatorModeConfig(uint32_t PWR_Regulator_Voltage);
void PWR_OverDriveCmd(FunctionalState NewState);
void PWR_OverDriveSWCmd(FunctionalState NewState);
void PWR_UnderDriveCmd(FunctionalState NewState);
/* FLASH Power Down configuration functions ***********************************/
void PWR_FlashPowerDownCmd(FunctionalState NewState);
/* Low Power modes configuration functions ************************************/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterUnderDriveSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
void PWR_EnterSTANDBYMode(void);
/* Flags management functions *************************************************/
......@@ -176,4 +207,4 @@ void PWR_ClearFlag(uint32_t PWR_FLAG);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rng.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_rng.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the Random
* Number Generator(RNG) firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -111,4 +117,4 @@ void RNG_ClearITPendingBit(uint8_t RNG_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_rtc.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_rtc.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -872,4 +878,4 @@ void RTC_ClearITPendingBit(uint32_t RTC_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_sdio.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_sdio.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the SDIO firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -77,7 +83,7 @@ typedef struct
uint32_t SDIO_Response; /*!< Specifies the SDIO response type.
This parameter can be a value of @ref SDIO_Response_Type */
uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait for interrupt request is enabled or disabled.
This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
......@@ -453,8 +459,8 @@ typedef struct
* @{
*/
#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000000)
#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000001)
#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)
#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
((MODE) == SDIO_ReadWaitMode_DATA2))
/**
......@@ -527,4 +533,4 @@ void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_spi.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_spi.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the SPI
* firmware library.
* firmware library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -112,19 +118,25 @@ typedef struct
#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
((PERIPH) == SPI2) || \
((PERIPH) == SPI3))
#define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \
((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == SPI3) || \
((PERIPH) == SPI4) || \
((PERIPH) == SPI5) || \
((PERIPH) == SPI6))
#define IS_SPI_ALL_PERIPH_EXT(PERIPH) (((PERIPH) == SPI1) || \
((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == SPI4) || \
((PERIPH) == SPI5) || \
((PERIPH) == SPI6) || \
((PERIPH) == I2S2ext) || \
((PERIPH) == I2S3ext))
#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
((PERIPH) == SPI3))
#define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
#define IS_SPI_23_PERIPH_EXT(PERIPH) (((PERIPH) == SPI2) || \
((PERIPH) == SPI3) || \
((PERIPH) == I2S2ext) || \
((PERIPH) == I2S3ext))
......@@ -534,4 +546,4 @@ void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_tim.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_tim.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the TIM firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -1141,4 +1147,4 @@ void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/Libraries/STM32F4xx_StdPeriph_Driver/inc/stm32f4xx_wwdg.h
浏览文件 @ 715cbb78
......@@ -2,21 +2,27 @@
******************************************************************************
* @file stm32f4xx_wwdg.h
* @author MCD Application Team
* @version V1.0.0
* @date 30-September-2011
* @version V1.3.0
* @date 08-November-2013
* @brief This file contains all the functions prototypes for the WWDG firmware
* library.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
* <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
......@@ -102,4 +108,4 @@ void WWDG_ClearFlag(void);
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32f429-disco/applications/sram.c 0 → 100644
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/applications/sram.h 0 → 100644
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/drivers/board.c
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/drivers/board.h
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/drivers/drv_sdram.c 0 → 100644
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/drivers/drv_sdram.h 0 → 100644
浏览文件 @ 715cbb78
此差异已折叠。
bsp/stm32f429-disco/drivers/gpio.h
浏览文件 @ 715cbb78
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或