Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 15ffe884 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #1324 from Bluebear233/nuc472 

[BSP]NUC472
上级 a18275c2 342f883a
展开全部 隐藏空白更改
内联 并排
Showing with 1640 addition and 357 deletion
bsp/nuvoton_nuc472/Libraries/Device/Nuvoton/NUC472_442/Source/GCC/startup.c
浏览文件 @ 15ffe884
...@@ -150,9 +150,9 @@ extern unsigned char _sdata; ...@@ -150,9 +150,9 @@ extern unsigned char _sdata;
// End address for the .data section// defined in linker script // End address for the .data section// defined in linker script
extern unsigned char _edata; extern unsigned char _edata;
// Begin address for the .bss section// defined in linker script // Begin address for the .bss section// defined in linker script
extern unsigned char __bss_start__; extern unsigned char __bss_start;
// End address for the .bss section// defined in linker script // End address for the .bss section// defined in linker script
extern unsigned char __bss_end__; extern unsigned char __bss_end;
extern int entry(void); extern int entry(void);
...@@ -333,7 +333,7 @@ pHandler g_pfnVectors[] = ...@@ -333,7 +333,7 @@ pHandler g_pfnVectors[] =
void _start() void _start()
{ {
memcpy(&_sdata, &_sidata, &_edata - &_sdata); memcpy(&_sdata, &_sidata, &_edata - &_sdata);
memset(&__bss_start__, 0, &__bss_end__ - &__bss_start__); memset(&__bss_start, 0, &__bss_end - &__bss_start);
} }
static void Reset_Handler(void) static void Reset_Handler(void)
......
bsp/nuvoton_nuc472/README.md
浏览文件 @ 15ffe884
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
NuTiny-EVB-NUC472 NuTiny-EVB-NUC472
## note: ## note:
support the GCC MDK5 IAR support the GCC MDK4 MDK5 IAR
**TODO** **TODO**
bsp/nuvoton_nuc472/drivers/board.c
浏览文件 @ 15ffe884
...@@ -22,7 +22,7 @@ extern int Image$$RW_IRAM1$$ZI$$Limit; ...@@ -22,7 +22,7 @@ extern int Image$$RW_IRAM1$$ZI$$Limit;
#elif __ICCARM__ #elif __ICCARM__
#pragma section="HEAP" #pragma section="HEAP"
#else #else
extern int __bss_end__; extern int __bss_end;
#endif #endif
/** /**
...@@ -80,7 +80,7 @@ void rt_hw_board_init(void) ...@@ -80,7 +80,7 @@ void rt_hw_board_init(void)
rt_system_heap_init(__segment_end("HEAP"), (void*)SRAM_END); rt_system_heap_init(__segment_end("HEAP"), (void*)SRAM_END);
#else #else
/* init memory system */ /* init memory system */
rt_system_heap_init((void*)&__bss_end__, (void*)SRAM_END); rt_system_heap_init((void*)&__bss_end, (void*)SRAM_END);
#endif #endif
#endif /* RT_USING_HEAP */ #endif /* RT_USING_HEAP */
......
bsp/nuvoton_nuc472/drivers/nuc472_eth.c
浏览文件 @ 15ffe884
...@@ -181,7 +181,7 @@ static void init_rx_desc(rt_nuc472_emac_t emac) ...@@ -181,7 +181,7 @@ static void init_rx_desc(rt_nuc472_emac_t emac)
emac->rx_desc[i].status1 = OWNERSHIP_EMAC; emac->rx_desc[i].status1 = OWNERSHIP_EMAC;
emac->rx_desc[i].buf = &emac->rx_buf[i][0]; emac->rx_desc[i].buf = &emac->rx_buf[i][0];
emac->rx_desc[i].status2 = 0; emac->rx_desc[i].status2 = 0;
emac->rx_desc[i].next = &emac->rx_desc[(i + 1) % TX_DESCRIPTOR_NUM]; emac->rx_desc[i].next = &emac->rx_desc[(i + 1) % RX_DESCRIPTOR_NUM];
} }
emac_base->RXDSA = (unsigned int)&emac->rx_desc[0]; emac_base->RXDSA = (unsigned int)&emac->rx_desc[0];
return; return;
...@@ -205,8 +205,8 @@ static void set_mac_addr(rt_nuc472_emac_t emac, rt_uint8_t *addr) ...@@ -205,8 +205,8 @@ static void set_mac_addr(rt_nuc472_emac_t emac, rt_uint8_t *addr)
void EMAC_init(rt_nuc472_emac_t emac, rt_uint8_t *mac_addr) void EMAC_init(rt_nuc472_emac_t emac, rt_uint8_t *mac_addr)
{ {
EMAC_T *emac_base = emac->emac_base;
RT_ASSERT(emac->dev_addr != RT_NULL); RT_ASSERT(emac->dev_addr != RT_NULL);
EMAC_T *emac_base = emac->emac_base;
CLK_EnableModuleClock(EMAC_MODULE); CLK_EnableModuleClock(EMAC_MODULE);
...@@ -445,12 +445,12 @@ rt_err_t rt_nuc472_emac_tx(rt_device_t dev, struct pbuf* p) ...@@ -445,12 +445,12 @@ rt_err_t rt_nuc472_emac_tx(rt_device_t dev, struct pbuf* p)
struct pbuf *rt_nuc472_emac_rx(rt_device_t dev) struct pbuf *rt_nuc472_emac_rx(rt_device_t dev)
{ {
rt_nuc472_emac_t emac = (rt_nuc472_emac_t)dev; rt_nuc472_emac_t emac = (rt_nuc472_emac_t)dev;
unsigned int status;
struct pbuf* p; struct pbuf* p;
/* init p pointer */ /* init p pointer */
p = RT_NULL; p = RT_NULL;
unsigned int status;
status = emac->cur_rx_desc_ptr->status1; status = emac->cur_rx_desc_ptr->status1;
if(status & OWNERSHIP_EMAC) if(status & OWNERSHIP_EMAC)
......
bsp/nuvoton_nuc472/ldscripts/libs.ld 已删除 100644 → 0
浏览文件 @ a18275c2
/*
* Placeholder to list other libraries required by the application.
GROUP(
)
*/
bsp/nuvoton_nuc472/ldscripts/mem.ld 已删除 100644 → 0
浏览文件 @ a18275c2
/*
* Memory Spaces Definitions.
*
* Need modifying for a specific board.
* FLASH.ORIGIN: starting address of flash
* FLASH.LENGTH: length of flash
* RAM.ORIGIN: starting address of RAM bank 0
* RAM.LENGTH: length of RAM bank 0
*
* The values below can be addressed in further linker scripts
* using functions like 'ORIGIN(RAM)' or 'LENGTH(RAM)'.
*/
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K /*4K*/
}
/*
* For external ram use something like:
RAM (xrw) : ORIGIN = 0x68000000, LENGTH = 8K
*/
bsp/nuvoton_nuc472/ldscripts/sections.ld
浏览文件 @ 15ffe884
/* /*
* Default linker script for Cortex-M * linker script for STM32F10x with GNU ld
* * bernard.xiong 2009-10-14
* To make use of the multi-region initialisations, define
* OS_INCLUDE_STARTUP_INIT_MULTIPLE_RAM_SECTIONS for the _startup.c file.
*/ */
/* /* Program Entry, set to mark it as "used" and avoid gc */
* The '__stack' definition is required by crt0, do not remove it. MEMORY
*/ {
__stack = ORIGIN(RAM) + LENGTH(RAM); CODE (rx) : ORIGIN = 0x00000000, LENGTH = 512k /* 128K sram */
DATA (rw) : ORIGIN = 0x20000000, LENGTH = 64k /* 512KB flash */
_estack = __stack; /* STM specific definition */ }
/*
* Default stack sizes.
* These are used by the startup in order to allocate stacks
* for the different modes.
*/
__Main_Stack_Size = 1024 ;
PROVIDE ( _Main_Stack_Size = __Main_Stack_Size ) ;
__Main_Stack_Limit = __stack - __Main_Stack_Size ;
/* "PROVIDE" allows to easily override these values from an
* object file or the command line. */
PROVIDE ( _Main_Stack_Limit = __Main_Stack_Limit ) ;
/*
* There will be a link error if there is not this amount of
* RAM free at the end.
*/
_Minimum_Stack_Size = 256 ;
/*
* Default heap definitions.
* The heap start immediately after the last statically allocated
* .sbss/.noinit section, and extends up to the main stack limit.
*/
PROVIDE ( _Heap_Begin = _end_noinit ) ;
PROVIDE ( _Heap_Limit = __stack - __Main_Stack_Size ) ;
/*
* The entry point is informative, for debuggers and simulators,
* since the Cortex-M vector points to it anyway.
*/
ENTRY(_start) ENTRY(_start)
_system_stack_size = 0x400;
/* Sections Definitions */
SECTIONS SECTIONS
{ {
/* .text :
* For Cortex-M devices, the beginning of the startup code is stored in
* the .isr_vector section, which goes to FLASH.
*/
.isr_vector : ALIGN(4)
{
FILL(0xFF)
__vectors_start = ABSOLUTE(.) ;
__vectors_start__ = ABSOLUTE(.) ; /* STM specific definition */
KEEP(*(.isr_vector)) /* Interrupt vectors */
KEEP(*(.cfmconfig)) /* Freescale configuration words */
/*
* This section is here for convenience, to store the
* startup code at the beginning of the flash area, hoping that
* this will increase the readability of the listing.
*/
*(.after_vectors .after_vectors.*) /* Startup code and ISR */
} >FLASH
.inits : ALIGN(4)
{ {
/* . = ALIGN(4);
* Memory regions initialisation arrays. _stext = .;
* KEEP(*(.isr_vector)) /* Startup code */
* Thee are two kinds of arrays for each RAM region, one for . = ALIGN(4);
* data and one for bss. Each is iterrated at startup and the *(.text) /* remaining code */
* region initialisation is performed. *(.text.*) /* remaining code */
* *(.rodata) /* read-only data (constants) */
* The data array includes: *(.rodata*)
* - from (LOADADDR()) *(.glue_7)
* - region_begin (ADDR()) *(.glue_7t)
* - region_end (ADDR()+SIZEOF()) *(.gnu.linkonce.t*)
*
* The bss array includes:
* - region_begin (ADDR())
* - region_end (ADDR()+SIZEOF())
*
* WARNING: It is mandatory that the regions are word aligned,
* since the initialisation code works only on words.
*/
__data_regions_array_start = .;
LONG(LOADADDR(.data));
LONG(ADDR(.data));
LONG(ADDR(.data)+SIZEOF(.data));
__data_regions_array_end = .;
__bss_regions_array_start = .;
LONG(ADDR(.bss));
LONG(ADDR(.bss)+SIZEOF(.bss));
__bss_regions_array_end = .;
/* End of memory regions initialisation arrays. */
/*
* These are the old initialisation sections, intended to contain
* naked code, with the prologue/epilogue added by crti.o/crtn.o
* when linking with startup files. The standalone startup code
* currently does not run these, better use the init arrays below.
*/
KEEP(*(.init))
KEEP(*(.fini))
/* section information for finsh shell */ /* section information for finsh shell */
. = ALIGN(4); . = ALIGN(4);
...@@ -135,7 +38,7 @@ SECTIONS ...@@ -135,7 +38,7 @@ SECTIONS
KEEP(*(VSymTab)) KEEP(*(VSymTab))
__vsymtab_end = .; __vsymtab_end = .;
. = ALIGN(4); . = ALIGN(4);
/* section information for initial. */ /* section information for initial. */
. = ALIGN(4); . = ALIGN(4);
__rt_init_start = .; __rt_init_start = .;
...@@ -143,212 +46,67 @@ SECTIONS ...@@ -143,212 +46,67 @@ SECTIONS
__rt_init_end = .; __rt_init_end = .;
. = ALIGN(4); . = ALIGN(4);
. = ALIGN(4);
_etext = .;
} > CODE = 0
/* /* .ARM.exidx is sorted, so has to go in its own output section. */
* The preinit code, i.e. an array of pointers to initialisation __exidx_start = .;
* functions to be performed before constructors. .ARM.exidx :
*/
PROVIDE_HIDDEN (__preinit_array_start = .);
/*
* Used to run the SystemInit() before anything else.
*/
KEEP(*(.preinit_array_sysinit .preinit_array_sysinit.*))
/*
* Used for other platform inits.
*/
KEEP(*(.preinit_array_platform .preinit_array_platform.*))
/*
* The application inits. If you need to enforce some order in
* execution, create new sections, as before.
*/
KEEP(*(.preinit_array .preinit_array.*))
PROVIDE_HIDDEN (__preinit_array_end = .);
. = ALIGN(4);
/*
* The init code, i.e. an array of pointers to static constructors.
*/
PROVIDE_HIDDEN (__init_array_start = .);
KEEP(*(SORT(.init_array.*)))
KEEP(*(.init_array))
PROVIDE_HIDDEN (__init_array_end = .);
. = ALIGN(4);
/*
* The fini code, i.e. an array of pointers to static destructors.
*/
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP(*(SORT(.fini_array.*)))
KEEP(*(.fini_array))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/*
* For some STRx devices, the beginning of the startup code
* is stored in the .flashtext section, which goes to FLASH.
*/
.flashtext : ALIGN(4)
{ {
*(.flashtext .flashtext.*) /* Startup code */ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
} >FLASH
/*
* The program code is stored in the .text section,
* which goes to FLASH.
*/
.text : ALIGN(4)
{
*(.text .text.*) /* all remaining code */
/* read-only data (constants) */
*(.rodata .rodata.* .constdata .constdata.*)
*(vtable) /* C++ virtual tables */ /* This is used by the startup in order to initialize the .data secion */
_sidata = .;
} > CODE
__exidx_end = .;
KEEP(*(.eh_frame*)) /* .data section which is used for initialized data */
/* .data : AT (_sidata)
* Stub sections generated by the linker, to glue together
* ARM and Thumb code. .glue_7 is used for ARM code calling
* Thumb code, and .glue_7t is used for Thumb code calling
* ARM code. Apparently always generated by the linker, for some
* architectures, so better leave them here.
*/
*(.glue_7)
*(.glue_7t)
KEEP (*(.init))
KEEP (*(.fini))
} >FLASH
/* ARM magic sections */
.ARM.extab : ALIGN(4)
{
*(.ARM.extab* .gnu.linkonce.armextab.*)
} > FLASH
. = ALIGN(4);
__exidx_start = .;
.ARM.exidx : ALIGN(4)
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > FLASH
__exidx_end = .;
. = ALIGN(4);
_etext = .;
__etext = .;
/* MEMORY_ARRAY */
/*
.ROarraySection :
{ {
*(.ROarraySection .ROarraySection.*) . = ALIGN(4);
} >MEMORY_ARRAY /* This is used by the startup in order to initialize the .data secion */
*/ _sdata = . ;
/*
* This address is used by the startup code to
* initialise the .data section.
*/
_sidata = LOADADDR(.data);
/*
* The initialised data section.
*
* The program executes knowing that the data is in the RAM
* but the loader puts the initial values in the FLASH (inidata).
* It is one task of the startup to copy the initial values from
* FLASH to RAM.
*/
.data : ALIGN(4)
{
FILL(0xFF)
/* This is used by the startup code to initialise the .data section */
_sdata = . ; /* STM specific definition */
__data_start__ = . ;
*(.data_begin .data_begin.*)
*(.data .data.*) *(.data)
*(.data.*)
*(.data_end .data_end.*) *(.gnu.linkonce.d*)
. = ALIGN(4);
/* This is used by the startup code to initialise the .data section */ . = ALIGN(4);
_edata = . ; /* STM specific definition */ /* This is used by the startup in order to initialize the .data secion */
__data_end__ = . ; _edata = . ;
} >DATA
} >RAM AT>FLASH .stack :
{
/* _sstack = .;
* The uninitialised data sections. NOLOAD is used to avoid . = . + _system_stack_size;
* the "section `.bss' type changed to PROGBITS" warning . = ALIGN(4);
*/ _estack = .;
} >DATA
/* The primary uninitialised data section. */ __bss_start = .;
.bss (NOLOAD) : ALIGN(4) .bss :
{ {
__bss_start__ = .; /* standard newlib definition */ . = ALIGN(4);
_sbss = .; /* STM specific definition */ /* This is used by the startup in order to initialize the .bss secion */
*(.bss_begin .bss_begin.*) _sbss = .;
*(.bss .bss.*) *(.bss)
*(.bss.*)
*(COMMON) *(COMMON)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss secion */
_ebss = . ;
*(.bss_end .bss_end.*) *(.bss.init)
. = ALIGN(4); } > DATA
__bss_end__ = .; /* standard newlib definition */ __bss_end = .;
_ebss = . ; /* STM specific definition */
} >RAM _end = .;
.noinit (NOLOAD) : ALIGN(4)
{
_noinit = .;
*(.noinit .noinit.*)
. = ALIGN(4) ;
_end_noinit = .;
} > RAM
/* Mandatory to be word aligned, _sbrk assumes this */
PROVIDE ( end = _end_noinit ); /* was _ebss */
PROVIDE ( _end = _end_noinit );
PROVIDE ( __end = _end_noinit );
PROVIDE ( __end__ = _end_noinit );
/*
* Used for validation only, do not allocate anything here!
*
* This is just to check that there is enough RAM left for the Main
* stack. It should generate an error if it's full.
*/
._check_stack : ALIGN(4)
{
. = . + _Minimum_Stack_Size ;
} >RAM
/* After that there are only debugging sections. */
/* This can remove the debugging information from the standard libraries */
/*
DISCARD :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
*/
/* Stabs debugging sections. */ /* Stabs debugging sections. */
.stab 0 : { *(.stab) } .stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) } .stabstr 0 : { *(.stabstr) }
...@@ -357,11 +115,9 @@ SECTIONS ...@@ -357,11 +115,9 @@ SECTIONS
.stab.index 0 : { *(.stab.index) } .stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) } .stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) } .comment 0 : { *(.comment) }
/* /* DWARF debug sections.
* DWARF debug sections.
* Symbols in the DWARF debugging sections are relative to the beginning * Symbols in the DWARF debugging sections are relative to the beginning
* of the section so we begin them at 0. * of the section so we begin them at 0. */
*/
/* DWARF 1 */ /* DWARF 1 */
.debug 0 : { *(.debug) } .debug 0 : { *(.debug) }
.line 0 : { *(.line) } .line 0 : { *(.line) }
...@@ -383,5 +139,5 @@ SECTIONS ...@@ -383,5 +139,5 @@ SECTIONS
.debug_weaknames 0 : { *(.debug_weaknames) } .debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) } .debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) } .debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) } .debug_varnames 0 : { *(.debug_varnames) }
} }
bsp/nuvoton_nuc472/project.uvproj 0 → 100644
浏览文件 @ 15ffe884
此差异已折叠。
bsp/nuvoton_nuc472/template.uvproj 0 → 100644
浏览文件 @ 15ffe884
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
<SchemaVersion>1.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>rtthread-nuc472</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<TargetCommonOption>
<Device>NUC472HI8AE</Device>
<Vendor>Nuvoton</Vendor>
<Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0-0x7FFFF) CLOCK(84000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile>undefined</StartupFile>
<FlashDriverDll></FlashDriverDll>
<DeviceId>0</DeviceId>
<RegisterFile></RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile>SFD\Nuvoton\NUC400_v1.SFR</SFDFile>
<bCustSvd>0</bCustSvd>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath></RegisterFilePath>
<DBRegisterFilePath></DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
<ButtonStop>0</ButtonStop>
<NotGenerated>0</NotGenerated>
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\build\</OutputDirectory>
<OutputName>template</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>1</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>1</BrowseInformation>
<ListingPath>.\build\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>0</CreateBatchFile>
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
<nStopU1X>0</nStopU1X>
<nStopU2X>0</nStopU2X>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</BeforeMake>
<AfterMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
<ComprImg>1</ComprImg>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments></SimDllArguments>
<SimDlgDll>DARMCM1.DLL</SimDlgDll>
<SimDlgDllArguments></SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments></TargetDllArguments>
<TargetDlgDll>TARMCM1.DLL</TargetDlgDll>
<TargetDlgDllArguments></TargetDlgDllArguments>
</DllOption>
<DebugOption>
<OPTHX>
<HexSelection>1</HexSelection>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen>
</OPTHX>
<Simulator>
<UseSimulator>1</UseSimulator>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>1</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
<RestoreSysVw>1</RestoreSysVw>
</Simulator>
<Target>
<UseTarget>0</UseTarget>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>0</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<RestoreTracepoints>1</RestoreTracepoints>
<RestoreSysVw>1</RestoreSysVw>
<UsePdscDebugDescription>1</UsePdscDebugDescription>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>-1</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
</SimDlls>
<TargetDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver></Driver>
</TargetDlls>
</DebugOption>
<Utilities>
<Flash1>
<UseTargetDll>0</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
<Capability>0</Capability>
<DriverSelection>-1</DriverSelection>
</Flash1>
<bUseTDR>0</bUseTDR>
<Flash2></Flash2>
<Flash3></Flash3>
<Flash4></Flash4>
<pFcarmOut></pFcarmOut>
<pFcarmGrp></pFcarmGrp>
<pFcArmRoot></pFcArmRoot>
<FcArmLst>0</FcArmLst>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
<GenerateListings>0</GenerateListings>
<asHll>1</asHll>
<asAsm>1</asAsm>
<asMacX>1</asMacX>
<asSyms>1</asSyms>
<asFals>1</asFals>
<asDbgD>1</asDbgD>
<asForm>1</asForm>
<ldLst>0</ldLst>
<ldmm>1</ldmm>
<ldXref>1</ldXref>
<BigEnd>0</BigEnd>
<AdsALst>1</AdsALst>
<AdsACrf>1</AdsACrf>
<AdsANop>0</AdsANop>
<AdsANot>0</AdsANot>
<AdsLLst>1</AdsLLst>
<AdsLmap>1</AdsLmap>
<AdsLcgr>1</AdsLcgr>
<AdsLsym>1</AdsLsym>
<AdsLszi>1</AdsLszi>
<AdsLtoi>1</AdsLtoi>
<AdsLsun>1</AdsLsun>
<AdsLven>1</AdsLven>
<AdsLsxf>1</AdsLsxf>
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M4"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
<hadIROM>1</hadIROM>
<hadIRAM>1</hadIRAM>
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>2</RvdsVP>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>0</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
<OptFeed>0</OptFeed>
<NoZi1>0</NoZi1>
<NoZi2>0</NoZi2>
<NoZi3>0</NoZi3>
<NoZi4>0</NoZi4>
<NoZi5>0</NoZi5>
<Ro1Chk>0</Ro1Chk>
<Ro2Chk>0</Ro2Chk>
<Ro3Chk>0</Ro3Chk>
<Ir1Chk>1</Ir1Chk>
<Ir2Chk>0</Ir2Chk>
<Ra1Chk>0</Ra1Chk>
<Ra2Chk>0</Ra2Chk>
<Ra3Chk>0</Ra3Chk>
<Im1Chk>1</Im1Chk>
<Im2Chk>0</Im2Chk>
<OnChipMemories>
<Ocm1>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm1>
<Ocm2>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm2>
<Ocm3>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm3>
<Ocm4>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm4>
<Ocm5>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm5>
<Ocm6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm6>
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x10000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x80000</Size>
</IROM>
<XRAM>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</XRAM>
<OCR_RVCT1>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT1>
<OCR_RVCT2>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT2>
<OCR_RVCT3>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT3>
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x80000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT5>
<OCR_RVCT6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT6>
<OCR_RVCT7>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT7>
<OCR_RVCT8>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT8>
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x10000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>0</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>0</wLevel>
<uThumb>0</uThumb>
<uSurpInc>0</uSurpInc>
<uC99>0</uC99>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>1</interw>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<thumb>0</thumb>
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<uSurpInc>0</uSurpInc>
<useXO>0</useXO>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>1</umfTarg>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<noStLib>0</noStLib>
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x20000000</DataAddressRange>
<pXoBase></pXoBase>
<ScatterFile></ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
</Target>
</Targets>
</Project>
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或