- 14 3月, 2022 2 次提交
- 12 3月, 2022 1 次提交
-
-
由 Wayne 提交于
-
- 11 3月, 2022 4 次提交
- 10 3月, 2022 1 次提交
-
-
由 mysterywolf 提交于
* [stm32][nucleo-f072] add arduino gpio support * 完善stm32f401nucleo的基本配置 * 修改led引脚描述 * 潘多拉增加arduino引脚别名 * [ARDUINO]STM32L072RB 增加ADC A0-A5的引脚配置 * add pwm
-
- 08 3月, 2022 3 次提交
-
-
由 andychen329 提交于
update readme picture name
-
由 Dozingfiretruck 提交于
* add:air105 bsp * add:去掉注释代码 * add:注释修改 * fix:格式化一遍代码格式 * add:main函数添加闪灯 * add:完善bsp * add:添加一些信息 * add:使用工作队列喂狗 * add:整理目录 * add:去掉乱码部分 * add:修改readme * add:更新readme说明 * add:去掉bootloader.bin和soc_download.exe,README.md中添加标注 * fix:去除多余文件 * add:补充license * add:支持scons --dist * add:更新soc_download.exe连接地址
-
由 stevetong459 提交于
* 本次提交包括①BSP驱动新增②F103库更新③GCC、IAR适配及MDK更新④README文件及由更新驱动引起的脚本改动。 详情如下: 一、BSP驱动新增 这是本次PR的主要目的,现新增了如下BSP驱动: ADC、DAC、RTC、PWM、HWTIMER、I2C、SPI和WDT等八个驱动文件。 二、F103库更新: 本次提交使用2022年3月初极海官网发布的最新F103库,主要增加了版权声明、USB驱动及其他代码调整。 三、编译器适配: 1、新增GCC编译支持,在ENV工具下编译能成功且输出的bin文件能够使开发板闪灯。 2、新增IAR工程支持。 3、由F103的SDK更新,MDK的工程也进行了相应更新。 四、其他 1、README文件做了修改,加入了scons编译后的jlink下载说明和官网链接。 2、Kconfig、SConscript脚本根据驱动更新做了修改。 * 格式化代码(AStyle + Formatting) * 增加BSP APM版权声明 * 在ci添加当前bsp的路径,以能够验证gcc能否正常编译 * 路径的“\”改为“/”
-
- 07 3月, 2022 4 次提交
-
-
由 GUI 提交于
* [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 * [libcpu/aarch64] disable irq/fiq when switch thread * [libcpu/aarch64] add gtimer frq set and stack align
-
由 来一颗糖 提交于
-
由 Yang sheng 提交于
-
由 mysterywolf 提交于
-
- 04 3月, 2022 1 次提交
-
-
由 Bruceoxl 提交于
* [bsp/gd32]Optimize UART * [bsp/gd32]Optimize UART
-
- 27 2月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 23 2月, 2022 3 次提交
-
-
由 mysterywolf 提交于
* [lwip] integrate lwip porting layer * Lwip 通用文件梳理 (#2) * [modify] extract the common files for different version about lwip. * [update] the initialization logic of lwIP. * 整理源码结构 * ethernetif 头文件 ""改为<> * 整理代码 * add macro definition "RT_USING_DEVICE_IPC". * [update] mandatory selected "RT_USING_DEVICE_IPC". * [modify] compile error for lost "lwip/init.h" Co-authored-by: Nxiangxistu <52819708+xiangxistu@users.noreply.github.com> Co-authored-by: Nliuxianliang <liuxianliang@rt-thread.com>
-
由 guo 提交于
-
由 mysterywolf 提交于
* [Arduino][stm32l475] enable i2c bus device * 增加默认i2c总线设备名称
-
- 18 2月, 2022 1 次提交
-
-
由 Tuber 提交于
* add ch579m bsp Author: Tuber <tuber@xyza.cn> Date: Wed Feb 16 07:20:23 2022 +0000 * fix uart reg value error and format code * change file encode to utf-8
-
- 17 2月, 2022 2 次提交
-
-
由 mysterywolf 提交于
-
由 GUI 提交于
* [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2
-
- 14 2月, 2022 3 次提交
-
-
由 WillianChan 提交于
Signed-off-by: NWillianChan <chentingwei@rt-thread.com>
-
由 yanmowudi 提交于
-
由 WillianChan 提交于
Signed-off-by: NWillianChan <chentingwei@rt-thread.com>
-
- 08 2月, 2022 2 次提交
-
-
由 Wayne 提交于
1. Add default rtconfig.h header. 2. Fix IP reset issue. Co-authored-by: NWayne Lin <wclin@nuvoton.com>
-
由 liuhy-2020 提交于
* [bsp][essemi] update es32f36xx libraries. * [bsp][essemi] add led_pin control.
-
- 07 2月, 2022 1 次提交
-
-
由 RudyLo 提交于
* [bsp][art-pi] add spi lcd ili9488 driver * [bsp][art-pi] support LVGL display * [bsp][artpi] support LVGL indev * [bsp][artpi] debug LVGL indev with ft6236 * [bsp][artpi] swap and invert touchpad coordinate * [bsp][artpi] redundant declarations * [bsp][artpi] indent BSP_USING_LVGL config * [bsp][artpi] default build debug version * [bsp][artpi] fix BSP_USING_LVGL Kconfig
-
- 29 1月, 2022 2 次提交
-
-
由 guozhanxin 提交于
-
由 mysterywolf 提交于
原始提交PR:https://gitee.com/rtthread/rt-thread/pulls/372 提交者:https://gitee.com/wei-handong ---------------------- 在TI公司C6000 DSP处理器上成功移植rt-thread操作系统;主要在libcpu/ti-dsp/c6x添加keystone架构底层代码,在bsp/ti-c6678添加bsp工程,该工程已在本人的开发板上成功运行 * 添加TMS320C6678处理器,keystone架构底层代码 * 添加支持中断栈部分代码,修改格式 * 修改汇编rt_hw_context_switch_to处关于时间槽的使用;修改格式 * 修改使用C语言构建任务栈帧,清除fls和ffs对<c6x.h>文件的依赖 * 修改bsp tms320c6678工程,并测试 * 删除依赖TI的KeyStone_common.c文件 * 添加编译说明 * update bsp/ti-tms320c6678/README.md. * format code Co-authored-by: NHuang bo <hb265419@126.com> Co-authored-by:
hdwei <1147479335@qq.com> Co-authored-by: Nbernard <bernard.xiong@gmail.com> Co-authored-by: Nrtthread-bot <48120998+rtthread-bot@users.noreply.github.com> Co-authored-by:
Meco Man <920369182@qq.com>
-
- 28 1月, 2022 3 次提交
-
-
由 mysterywolf 提交于
-
由 charlown 提交于
-
由 charlown 提交于
-
- 27 1月, 2022 6 次提交