Skip to content

R
rt-thread

yunqingabc / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 b2102847 编写于 作者: W weety
浏览文件
操作

Modify the interrupt interface implementations, changes in the part of the parameter definition.

上级 3de4b92a
隐藏空白更改
内联 并排
Showing with 114 addition and 51 deletion
bsp/at91sam9260/at91_mci.c
浏览文件 @ b2102847
......@@ -49,8 +49,6 @@ struct at91_mci {
rt_uint32_t current_status;
};
static struct at91_mci *at_mci;
/*
* Reset the controller and restore most of the state
*/
......@@ -592,8 +590,9 @@ static void at91_mci_completed_command(struct at91_mci *mci, rt_uint32_t status)
/*
* Handle an interrupt
*/
static void at91_mci_irq(int irq)
static void at91_mci_irq(int irq, void *param)
{
struct at91_mci *mci = (struct at91_mci *)param;
rt_int32_t completed = 0;
rt_uint32_t int_status, int_mask;
......@@ -635,13 +634,13 @@ static void at91_mci_irq(int irq)
if (int_status & AT91_MCI_TXBUFE)
{
mci_dbg("TX buffer empty\n");
at91_mci_handle_transmitted(at_mci);
at91_mci_handle_transmitted(mci);
}
if (int_status & AT91_MCI_ENDRX)
{
mci_dbg("ENDRX\n");
at91_mci_post_dma_read(at_mci);
at91_mci_post_dma_read(mci);
}
if (int_status & AT91_MCI_RXBUFF)
......@@ -668,7 +667,7 @@ static void at91_mci_irq(int irq)
if (int_status & AT91_MCI_BLKE)
{
mci_dbg("Block transfer has ended\n");
if (at_mci->req->data && at_mci->req->data->blks > 1)
if (mci->req->data && mci->req->data->blks > 1)
{
/* multi block write : complete multi write
* command and send stop */
......@@ -684,7 +683,7 @@ static void at91_mci_irq(int irq)
rt_mmcsd_signal_sdio_irq(host->mmc);*/
if (int_status & AT91_MCI_SDIOIRQB)
sdio_irq_wakeup(at_mci->host);
sdio_irq_wakeup(mci->host);
if (int_status & AT91_MCI_TXRDY)
mci_dbg("Ready to transmit\n");
......@@ -695,7 +694,7 @@ static void at91_mci_irq(int irq)
if (int_status & AT91_MCI_CMDRDY)
{
mci_dbg("Command ready\n");
completed = at91_mci_handle_cmdrdy(at_mci);
completed = at91_mci_handle_cmdrdy(mci);
}
}
......@@ -703,7 +702,7 @@ static void at91_mci_irq(int irq)
{
mci_dbg("Completed command\n");
at91_mci_write(AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
at91_mci_completed_command(at_mci, int_status);
at91_mci_completed_command(mci, int_status);
}
else
at91_mci_write(AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB));
......@@ -791,7 +790,7 @@ static const struct rt_mmcsd_host_ops ops = {
at91_mci_enable_sdio_irq,
};
void at91_mci_detect(int irq)
void at91_mci_detect(int irq, void *param)
{
rt_kprintf("mmcsd gpio detected\n");
}
......@@ -819,7 +818,7 @@ static void mci_gpio_init()
rt_int32_t at91_mci_init(void)
{
struct rt_mmcsd_host *host;
//struct at91_mci *mci;
struct at91_mci *mci;
host = mmcsd_alloc_host();
if (!host)
......@@ -827,14 +826,14 @@ rt_int32_t at91_mci_init(void)
return -RT_ERROR;
}
at_mci = rt_malloc(sizeof(struct at91_mci));
if (!at_mci)
mci = rt_malloc(sizeof(struct at91_mci));
if (!mci)
{
rt_kprintf("alloc mci failed\n");
goto err;
}
rt_memset(at_mci, 0, sizeof(struct at91_mci));
rt_memset(mci, 0, sizeof(struct at91_mci));
host->ops = &ops;
host->freq_min = 375000;
......@@ -846,7 +845,7 @@ rt_int32_t at91_mci_init(void)
host->max_blk_size = 512;
host->max_blk_count = 4096;
at_mci->host = host;
mci->host = host;
mci_gpio_init();
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_MCI); //enable MCI clock
......@@ -855,14 +854,16 @@ rt_int32_t at91_mci_init(void)
at91_mci_enable();
/* instal interrupt */
rt_hw_interrupt_install(AT91SAM9260_ID_MCI, at91_mci_irq, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_MCI, at91_mci_irq,
(void *)mci, "MMC");
rt_hw_interrupt_umask(AT91SAM9260_ID_MCI);
rt_hw_interrupt_install(gpio_to_irq(AT91_PIN_PA7), at91_mci_detect, RT_NULL);
rt_hw_interrupt_install(gpio_to_irq(AT91_PIN_PA7),
at91_mci_detect, RT_NULL, "MMC_DETECT");
rt_hw_interrupt_umask(gpio_to_irq(AT91_PIN_PA7));
rt_timer_init(&at_mci->timer, "mci_timer",
rt_timer_init(&mci->timer, "mci_timer",
at91_timeout_timer,
at_mci,
mci,
RT_TICK_PER_SECOND,
RT_TIMER_FLAG_PERIODIC);
......@@ -870,7 +871,7 @@ rt_int32_t at91_mci_init(void)
//rt_sem_init(&mci->sem_ack, "sd_ack", 0, RT_IPC_FLAG_FIFO);
host->private_data = at_mci;
host->private_data = mci;
mmcsd_change(host);
......
bsp/at91sam9260/board.c
浏览文件 @ b2102847
......@@ -92,9 +92,10 @@ struct rt_device uart4_device;
/**
* This function will handle serial
*/
void rt_serial_handler(int vector)
void rt_serial_handler(int vector, void *param)
{
int status;
struct rt_device *dev = (rt_device_t)param;
switch (vector)
{
......@@ -105,7 +106,7 @@ void rt_serial_handler(int vector)
{
return;
}
rt_hw_serial_isr(&uart1_device);
rt_hw_serial_isr(dev);
break;
#endif
#ifdef RT_USING_UART1
......@@ -115,7 +116,7 @@ void rt_serial_handler(int vector)
{
return;
}
rt_hw_serial_isr(&uart2_device);
rt_hw_serial_isr(dev);
break;
#endif
#ifdef RT_USING_UART2
......@@ -125,7 +126,7 @@ void rt_serial_handler(int vector)
{
return;
}
rt_hw_serial_isr(&uart3_device);
rt_hw_serial_isr(dev);
break;
#endif
#ifdef RT_USING_UART3
......@@ -135,7 +136,7 @@ void rt_serial_handler(int vector)
{
return;
}
rt_hw_serial_isr(&uart4_device);
rt_hw_serial_isr(dev);
break;
#endif
default: break;
......@@ -176,7 +177,8 @@ void rt_hw_uart_init(void)
at91_sys_write(AT91_PIOB + PIO_PDR, (1<<4)|(1<<5));
uart_port_init(AT91SAM9260_BASE_US0);
/* install interrupt handler */
rt_hw_interrupt_install(AT91SAM9260_ID_US0, rt_serial_handler, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_US0, rt_serial_handler,
(void *)&uart1_device, "UART0");
rt_hw_interrupt_umask(AT91SAM9260_ID_US0);
#endif
#ifdef RT_USING_UART1
......@@ -188,7 +190,8 @@ void rt_hw_uart_init(void)
at91_sys_write(AT91_PIOB + PIO_PDR, (1<<6)|(1<<7));
uart_port_init(AT91SAM9260_BASE_US1);
/* install interrupt handler */
rt_hw_interrupt_install(AT91SAM9260_ID_US1, rt_serial_handler, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_US1, rt_serial_handler,
(void *)&uart2_device, "UART1");
rt_hw_interrupt_umask(AT91SAM9260_ID_US1);
#endif
#ifdef RT_USING_UART2
......@@ -200,7 +203,8 @@ void rt_hw_uart_init(void)
at91_sys_write(AT91_PIOB + PIO_PDR, (1<<8)|(1<<9));
uart_port_init(AT91SAM9260_BASE_US2);
/* install interrupt handler */
rt_hw_interrupt_install(AT91SAM9260_ID_US2, rt_serial_handler, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_US2, rt_serial_handler,
(void *)&uart3_device, "UART2");
rt_hw_interrupt_umask(AT91SAM9260_ID_US2);
#endif
#ifdef RT_USING_UART3
......@@ -212,7 +216,8 @@ void rt_hw_uart_init(void)
at91_sys_write(AT91_PIOB + PIO_PDR, (1<<10)|(1<<11));
uart_port_init(AT91SAM9260_BASE_US3);
/* install interrupt handler */
rt_hw_interrupt_install(AT91SAM9260_ID_US3, rt_serial_handler, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_US3, rt_serial_handler,
(void *)&uart4_device, "UART3");
rt_hw_interrupt_umask(AT91SAM9260_ID_US3);
#endif
......@@ -246,7 +251,7 @@ static rt_uint32_t pit_cnt; /* access only w/system irq blocked */
/**
* This function will handle rtos timer
*/
void rt_timer_handler(int vector)
void rt_timer_handler(int vector, void *param)
{
#ifdef RT_USING_DBGU
if (at91_sys_read(AT91_DBGU + AT91_US_CSR) & 0x1) {
......@@ -309,7 +314,8 @@ static void at91sam926x_pit_init(void)
at91sam926x_pit_init();
/* install interrupt handler */
rt_hw_interrupt_install(AT91_ID_SYS, rt_timer_handler, RT_NULL);
rt_hw_interrupt_install(AT91_ID_SYS, rt_timer_handler,
RT_NULL, "system");
rt_hw_interrupt_umask(AT91_ID_SYS);
}
......
bsp/at91sam9260/macb.c
浏览文件 @ b2102847
......@@ -103,9 +103,9 @@ static void udelay(rt_uint32_t us)
for (len = 0; len < 10; len++ );
}
static void rt_macb_isr(int irq)
static void rt_macb_isr(int irq, void *param)
{
struct rt_macb_eth *macb = &macb_device;
struct rt_macb_eth *macb = (struct rt_macb_eth *)param;
rt_device_t dev = &(macb->parent.parent);
rt_uint32_t status, rsr, tsr;
......@@ -412,7 +412,8 @@ static rt_err_t rt_macb_init(rt_device_t dev)
| MACB_BIT(HRESP)));
/* instal interrupt */
rt_hw_interrupt_install(AT91SAM9260_ID_EMAC, rt_macb_isr, RT_NULL);
rt_hw_interrupt_install(AT91SAM9260_ID_EMAC, rt_macb_isr,
(void *)macb, "emac");
rt_hw_interrupt_umask(AT91SAM9260_ID_EMAC);
rt_timer_init(&macb->timer, "link_timer",
......
include/rthw.h
浏览文件 @ b2102847
......@@ -42,8 +42,8 @@ void rt_hw_interrupt_init(void);
void rt_hw_interrupt_mask(int vector);
void rt_hw_interrupt_umask(int vector);
void rt_hw_interrupt_install(int vector,
rt_isr_handler_t new_handler,
rt_isr_handler_t *old_handler);
rt_isr_handler_t handler,
void *param, char *name);
void rt_hw_interrupt_handle(int vector);
rt_base_t rt_hw_interrupt_disable(void);
......
include/rtthread.h
浏览文件 @ b2102847
......@@ -425,7 +425,7 @@ void rt_module_unload_sethook(void (*hook)(rt_module_t module));
/*
* interrupt service
*/
typedef void (*rt_isr_handler_t)(int vector);
typedef void (*rt_isr_handler_t)(int vector, void *param);
/*
* rt_interrupt_enter and rt_interrupt_leave only can be called by BSP
......
libcpu/arm/at91sam926x/interrupt.c
浏览文件 @ b2102847
......@@ -14,13 +14,15 @@
#include <rtthread.h>
#include "at91sam926x.h"
#include "interrupt.h"
#define MAX_HANDLERS (AIC_IRQS + PIN_IRQS)
extern rt_uint32_t rt_interrupt_nest;
/* exception and interrupt handler table */
rt_isr_handler_t isr_table[MAX_HANDLERS];
struct rt_irq_desc irq_desc[MAX_HANDLERS];
rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
rt_uint32_t rt_thread_switch_interrupt_flag;
......@@ -79,15 +81,16 @@ static rt_uint32_t at91sam9260_default_irq_priority[MAX_HANDLERS] = {
void rt_hw_interrupt_mask(int irq);
void rt_hw_interrupt_umask(int irq);
rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector)
rt_isr_handler_t rt_hw_interrupt_handle(rt_uint32_t vector, void *param)
{
rt_kprintf("Unhandled interrupt %d occured!!!\n", vector);
return RT_NULL;
}
rt_isr_handler_t at91_gpio_irq_handle(rt_uint32_t vector)
rt_isr_handler_t at91_gpio_irq_handle(rt_uint32_t vector, void *param)
{
rt_uint32_t isr, pio, irq_n;
void *parameter;
if (vector == AT91SAM9260_ID_PIOA)
{
......@@ -111,7 +114,8 @@ rt_isr_handler_t at91_gpio_irq_handle(rt_uint32_t vector)
{
if (isr & 1)
{
isr_table[irq_n](irq_n);
parameter = irq_desc[irq_n].param;
irq_desc[irq_n].isr_handle(irq_n, parameter);
}
isr >>= 1;
irq_n++;
......@@ -160,13 +164,22 @@ void at91_aic_init(rt_uint32_t *priority)
static void at91_gpio_irq_init()
{
int i, idx;
char *name[] = {"PIOA", "PIOB", "PIOC"};
at91_sys_write(AT91_PIOA+PIO_IDR, 0xffffffff);
at91_sys_write(AT91_PIOB+PIO_IDR, 0xffffffff);
at91_sys_write(AT91_PIOC+PIO_IDR, 0xffffffff);
isr_table[AT91SAM9260_ID_PIOA] = (rt_isr_handler_t)at91_gpio_irq_handle;
isr_table[AT91SAM9260_ID_PIOB] = (rt_isr_handler_t)at91_gpio_irq_handle;
isr_table[AT91SAM9260_ID_PIOC] = (rt_isr_handler_t)at91_gpio_irq_handle;
idx = AT91SAM9260_ID_PIOA;
for (i = 0; i < 3; i++)
{
rt_snprintf(irq_desc[idx].irq_name, RT_NAME_MAX - 1, name[i]);
irq_desc[idx].isr_handle = (rt_isr_handler_t)at91_gpio_irq_handle;
irq_desc[idx].param = RT_NULL;
irq_desc[idx].interrupt_cnt = 0;
idx++;
}
rt_hw_interrupt_umask(AT91SAM9260_ID_PIOA);
rt_hw_interrupt_umask(AT91SAM9260_ID_PIOB);
......@@ -192,7 +205,10 @@ void rt_hw_interrupt_init(void)
/* init exceptions table */
for(idx=0; idx < MAX_HANDLERS; idx++)
{
isr_table[idx] = (rt_isr_handler_t)rt_hw_interrupt_handle;
rt_snprintf(irq_desc[idx].irq_name, RT_NAME_MAX - 1, "default");
irq_desc[idx].isr_handle = (rt_isr_handler_t)rt_hw_interrupt_handle;
irq_desc[idx].param = RT_NULL;
irq_desc[idx].interrupt_cnt = 0;
}
at91_gpio_irq_init();
......@@ -292,12 +308,14 @@ void rt_hw_interrupt_umask(int irq)
* @param new_handler the interrupt service routine to be installed
* @param old_handler the old interrupt service routine
*/
void rt_hw_interrupt_install(int vector, rt_isr_handler_t new_handler, rt_isr_handler_t *old_handler)
void rt_hw_interrupt_install(int vector, rt_isr_handler_t handler, void *param, char *name)
{
if(vector < MAX_HANDLERS)
{
if (old_handler != RT_NULL) *old_handler = isr_table[vector];
if (new_handler != RT_NULL) isr_table[vector] = new_handler;
rt_snprintf(irq_desc[vector].irq_name, RT_NAME_MAX - 1, "%s", name);
irq_desc[vector].isr_handle = (rt_isr_handler_t)handler;
irq_desc[vector].param = param;
irq_desc[vector].interrupt_cnt = 0;
}
}
......@@ -335,3 +353,25 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
return 0;
}
#ifdef RT_USING_FINSH
void list_irq(void)
{
int irq;
rt_kprintf("number\tcount\tname\n");
for (irq = 0; irq < MAX_HANDLERS; irq++)
{
if (rt_strncmp(irq_desc[irq].irq_name, "default", sizeof("default")))
{
rt_kprintf("%02ld: %10ld %s\n", irq, irq_desc[irq].interrupt_cnt, irq_desc[irq].irq_name);
}
}
}
#include <finsh.h>
FINSH_FUNCTION_EXPORT(list_irq, list system irq);
#endif
libcpu/arm/at91sam926x/interrupt.h 0 → 100644
浏览文件 @ b2102847
#ifndef __INTERRUPT_H__
#define __INTERRUPT_H__
struct rt_irq_desc {
char irq_name[RT_NAME_MAX];
rt_isr_handler_t isr_handle;
void *param;
rt_uint32_t interrupt_cnt;
};
#endif
\ No newline at end of file
libcpu/arm/at91sam926x/trap.c
浏览文件 @ b2102847
......@@ -16,6 +16,7 @@
#include <rthw.h>
#include "at91sam926x.h"
#include "interrupt.h"
/**
* @addtogroup AT91SAM926X
......@@ -138,12 +139,13 @@ void rt_hw_trap_resv(struct rt_hw_register *regs)
rt_hw_cpu_shutdown();
}
extern rt_isr_handler_t isr_table[];
extern struct rt_irq_desc irq_desc[];
void rt_hw_trap_irq()
{
rt_isr_handler_t isr_func;
rt_uint32_t irqstat, irq, mask;
void *param;
//rt_kprintf("irq interrupt request\n");
/* get irq number */
irq = at91_sys_read(AT91_AIC_IVR);
......@@ -158,11 +160,13 @@ void rt_hw_trap_irq()
//at91_sys_write(AT91_AIC_EOICR, 0x55555555);
/* get interrupt service routine */
isr_func = isr_table[irq];
isr_func = irq_desc[irq].isr_handle;
param = irq_desc[irq].param;
/* turn to interrupt service routine */
isr_func(irq);
isr_func(irq, param);
at91_sys_write(AT91_AIC_EOICR, 0x55555555); //EIOCR must be write any value after interrupt, or else can't response next interrupt
irq_desc[irq].interrupt_cnt++;
}
void rt_hw_trap_fiq()
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或