添加移除后自动重启 for stm32-netradio

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@416 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm32_radio/Libraries/Mass_Storage/inc/hw_config.h

@@ -19,6 +19,7 @@
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f10x.h"
+#include "platform_config.h"
 
 /* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/

bsp/stm32_radio/Libraries/Mass_Storage/inc/platform_config.h

@@ -24,6 +24,9 @@
 #define USB_DISCONNECT_PIN                GPIO_Pin_7
 #define RCC_APB2Periph_GPIO_DISCONNECT    RCC_APB2Periph_GPIOG
 
+/* use auto remove: 0-NO 1-YES */
+#define USB_USE_AUTO_REMOVE               1
+
 /* use led: 0-NO  1-YES */
 #define USB_USE_LED                       1
 #define USB_LED_PORT                      GPIOE

bsp/stm32_radio/Libraries/Mass_Storage/src/mass_mal.c

@@ -91,8 +91,14 @@ uint16_t MAL_Read(uint8_t lun, uint32_t Memory_Offset, uint32_t *Readbuff, uint1
     return MAL_OK;
 }
 
+#if (USB_USE_AUTO_REMOVE == 1)
+unsigned long test_unit_ready_last = 0;
+#endif
 uint16_t MAL_GetStatus (uint8_t lun)
 {
+#if (USB_USE_AUTO_REMOVE == 1)
+    test_unit_ready_last = rt_tick_get();
+#endif
     switch(lun)
     {
     case 0:

bsp/stm32_radio/Libraries/Mass_Storage/src/usb_main.c

-#include "stm32f10x.h"
-#include "usb_lib.h"
-#include "usb_istr.h"
-#include "hw_config.h"
-#include "usb_pwr.h"
-
-#include "rtthread.h"
-
-extern uint32_t Mass_Memory_Size[3];
-extern uint32_t Mass_Block_Size[3];
-extern uint32_t Mass_Block_Count[3];
-extern rt_device_t dev_sdio;
-extern rt_device_t dev_spi_flash;
-
-#include <finsh.h>
-#include "sdcard.h"
-void USB_cable(void)
-{
-    rt_device_t dev = RT_NULL;
-    SD_CardInfo * sdio_info = RT_NULL;
-    dev = rt_device_find("sd0");
-
-    {
-        SPI_InitTypeDef SPI_InitStructure;
-        /*------------------------ SPI1 configuration ------------------------*/
-        SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;//SPI_Direction_1Line_Tx;
-        SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-        SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-        SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
-        SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
-        SPI_InitStructure.SPI_NSS  = SPI_NSS_Soft;
-        SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16;/* 72M/64=1.125M */
-        SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-        SPI_InitStructure.SPI_CRCPolynomial = 7;
-
-        SPI_I2S_DeInit(SPI1);
-        SPI_Init(SPI1, &SPI_InitStructure);
-
-        /* Enable SPI_MASTER */
-        SPI_Cmd(SPI1, ENABLE);
-        SPI_CalculateCRC(SPI1, DISABLE);
-    }
-
-
-    /* SPI_FLASH */
-    dev_spi_flash = rt_device_find("spi0");
-    Mass_Block_Size[1]  = 512;
-    Mass_Block_Count[1] = 4096;
-    Mass_Memory_Size[1] = 4096*512;
-
-    if(dev != RT_NULL)
-    {
-        dev_sdio = dev;
-        sdio_info = (SD_CardInfo *)dev->private;
-        Mass_Memory_Size[0] = sdio_info->CardCapacity;
-        Mass_Block_Size[0]  = sdio_info->CardBlockSize;
-        Mass_Block_Count[0] = Mass_Memory_Size[0] / Mass_Block_Size[0];
-    }
-    else
-    {
-        rt_kprintf("\r\nNo find the device sd0 !!!!");
-    }
-
-    /* 3:NAND */
-
-    /* usb msc up*/
-    Set_System();
-    Set_USBClock();
-    USB_Interrupts_Config();
-    USB_Init();
-}
-FINSH_FUNCTION_EXPORT(USB_cable, cable_the_usb);
+#include "stm32f10x.h"
+#include "usb_lib.h"
+#include "usb_istr.h"
+#include "hw_config.h"
+#include "usb_pwr.h"
+
+#include "rtthread.h"
+
+extern uint32_t Mass_Memory_Size[3];
+extern uint32_t Mass_Block_Size[3];
+extern uint32_t Mass_Block_Count[3];
+extern rt_device_t dev_sdio;
+extern rt_device_t dev_spi_flash;
+
+#if (USB_USE_AUTO_REMOVE == 1)
+extern unsigned long test_unit_ready_last;
+void msc_thread_entry(void *parameter)
+{
+    test_unit_ready_last = rt_tick_get();
+    while(1)
+    {
+        rt_thread_delay( RT_TICK_PER_SECOND/2 );
+        if( rt_tick_get() - test_unit_ready_last > RT_TICK_PER_SECOND*2 )
+        {
+            rt_kprintf("\r\nCable removed!\r\nSystemReset\r\n\r\n");
+            NVIC_SystemReset();
+        }
+    }
+}
+#endif
+
+#include <finsh.h>
+#include "sdcard.h"
+void USB_cable(void)
+{
+    rt_device_t dev = RT_NULL;
+    SD_CardInfo * sdio_info = RT_NULL;
+    dev = rt_device_find("sd0");
+
+    {
+        SPI_InitTypeDef SPI_InitStructure;
+        /*------------------------ SPI1 configuration ------------------------*/
+        SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;//SPI_Direction_1Line_Tx;
+        SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+        SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+        SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
+        SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
+        SPI_InitStructure.SPI_NSS  = SPI_NSS_Soft;
+        SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16;/* 72M/64=1.125M */
+        SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+        SPI_InitStructure.SPI_CRCPolynomial = 7;
+
+        SPI_I2S_DeInit(SPI1);
+        SPI_Init(SPI1, &SPI_InitStructure);
+
+        /* Enable SPI_MASTER */
+        SPI_Cmd(SPI1, ENABLE);
+        SPI_CalculateCRC(SPI1, DISABLE);
+    }
+
+
+    /* SPI_FLASH */
+    dev_spi_flash = rt_device_find("spi0");
+    Mass_Block_Size[1]  = 512;
+    Mass_Block_Count[1] = 4096;
+    Mass_Memory_Size[1] = 4096*512;
+
+    if(dev != RT_NULL)
+    {
+        dev_sdio = dev;
+        sdio_info = (SD_CardInfo *)dev->private;
+        Mass_Memory_Size[0] = sdio_info->CardCapacity;
+        Mass_Block_Size[0]  = sdio_info->CardBlockSize;
+        Mass_Block_Count[0] = Mass_Memory_Size[0] / Mass_Block_Size[0];
+    }
+    else
+    {
+        rt_kprintf("\r\nNo find the device sd0 !!!!");
+    }
+
+    /* 3:NAND */
+
+    /* usb msc up*/
+    Set_System();
+    Set_USBClock();
+    USB_Interrupts_Config();
+    USB_Init();
+
+#if (USB_USE_AUTO_REMOVE == 1)
+    /* delete the other thread */
+
+    /* create msc_thread */
+    {
+        rt_thread_t msc_thread;
+        msc_thread = rt_thread_create("msc_thread",
+                                      msc_thread_entry, RT_NULL,
+                                      1024, RT_THREAD_PRIORITY_MAX-1,1);
+        if (msc_thread != RT_NULL) rt_thread_startup(msc_thread);
+    }
+#endif
+}
+FINSH_FUNCTION_EXPORT(USB_cable, cable_the_usb);

bsp/stm32_radio/player_ui.c

@@ -73,7 +73,7 @@ void info_timer_timeout(rtgui_timer_t* timer, void* parameter)
 		RTGUI_WIDGET_FOREGROUND(RTGUI_WIDGET(home_view)) = RTGUI_RGB(82, 199, 16);
 		rtgui_dc_draw_hline(dc, 14  + (tinfo.position * 212)/ tinfo.duration, 226, 75);
 	}
-	
+
 	RTGUI_WIDGET_FOREGROUND(RTGUI_WIDGET(home_view)) = saved;
 	rtgui_dc_end_drawing(dc);
 }
@@ -210,7 +210,7 @@ void player_play_file(const char* fn)
 	{
 		rtgui_rect_t play_rect;
 		rtgui_image_t *button;
-		
+
 		/* update tag information */
 		player_update_tag_info(dc);
 
@@ -254,7 +254,7 @@ void player_play_url(const char* url)
 	{
 		rtgui_rect_t play_rect;
 		rtgui_image_t *button;
-		
+
 		/* update tag information */
 		player_update_tag_info(dc);
 
@@ -387,6 +387,12 @@ void function_action(void* parameter)
 	return;
 }
 
+extern void USB_cable(void);
+void function_cable(void)
+{
+    USB_cable();
+}
+
 struct list_item function_list[] =
 {
 	{"选择电台", RT_NULL, function_play_radio, RT_NULL},
@@ -394,6 +400,7 @@ struct list_item function_list[] =
 	{"播放文件", RT_NULL, function_filelist, RT_NULL},
 	{"设备信息", RT_NULL, function_device, RT_NULL},
 	{"选项设置", RT_NULL, function_action, RT_NULL},
+	{"USB 联机", RT_NULL, function_cable, RT_NULL},
 	{"返回播放器", RT_NULL, function_player, RT_NULL},
 };
 
@@ -581,14 +588,14 @@ static rt_bool_t home_view_event_handler(struct rtgui_widget* widget, struct rtg
 
 				dc = rtgui_dc_begin_drawing(widget);
 				if (dc == RT_NULL) return RT_FALSE;
-	
+
 				player_update_tag_info(dc);
 
 				saved = RTGUI_WIDGET_FOREGROUND(widget);
 
 				RTGUI_WIDGET_FOREGROUND(widget) = RTGUI_RGB(82, 199, 16);
 				rtgui_dc_draw_hline(dc, 14, 226, 75);
-	
+
 				/* update play button */
 				button = rtgui_image_create_from_mem("hdc",
 	                stop_hdh, sizeof(stop_hdh), RT_FALSE);
@@ -596,7 +603,7 @@ static rt_bool_t home_view_event_handler(struct rtgui_widget* widget, struct rtg
 	            play_rect.x2 = 61; play_rect.y2 = 114;
 	            rtgui_image_blit(button, dc, &play_rect);
 	            rtgui_image_destroy(button);
-	
+
 				RTGUI_WIDGET_FOREGROUND(widget) = saved;
 				rtgui_dc_end_drawing(dc);
 			}
@@ -608,7 +615,7 @@ static rt_bool_t home_view_event_handler(struct rtgui_widget* widget, struct rtg
 					rtgui_color_t saved;
 		            rtgui_image_t *button;
 		            rtgui_rect_t  play_rect;
-	
+
 					/* set stat */
 					next_step = PLAYER_STEP_STOP;
 					player_mode = PLAYER_STOP;