Remove older test script

tests/eosd_run_test.sh

-#!/bin/bash
-DIR="$(cd "$(dirname "$0")" && pwd)/.."
-
-# prevent bc from adding \ at end of large hex values
-export BC_LINE_LENGTH=9999
-
-TEST_OUTPUT="test_output_0.txt"
-
-if [ $# -lt 2 ]; then
-  echo "usage: eosd_run_test.sh --host=host_name --port=port --output=test_output_0.txt"
-  echo "  If --host==localhost then this script also launches an eosd for the test."
-  echo "  Example: eosd_run_test_sh --host=localhost --port=8888 --output=test_output_0.txt"
-  exit 1
-fi
-
-for i in "$@"
-do
-case $i in
-	-o*|--output=*)
-	TEST_OUTPUT="${i#*=}"
-	shift
-	;;
-        -h*|--host=*)
-	SERVER="${i#*=}"
-	shift
-	;;
-        -p*|--port=*)
-	PORT="${i#*=}"
-	shift
-	;;
-        -b*|--eosd=*)
-        EOSD="${i#*=}"
-        shift
-        ;;
-        *)
-	;;
-esac
-done
-
-
-# $1 - error message
-error()
-{
-  (>&2 echo $1)
-  killAll
-  echo =================================================================
-  echo Contents of tn_data_00/config.ini:
-  cat tn_data_00/config.ini
-  echo =================================================================
-  echo Contents of tn_data_00/stderr.txt:
-  cat tn_data_00/stderr.txt
-  echo =================================================================
-  echo Contents of test_walletd_output.log:
-  cat test_walletd_output.log
-  echo =================================================================
-  echo == Errors see above ==
-  exit 1
-}
-
-verifyErrorCode()
-{
-  rc=$?
-  if [[ $rc != 0 ]]; then
-    error "FAILURE - $1 returned error code $rc"
-  fi
-}
-
-killAll()
-{
-  if [ "$SERVER" == "localhost" ]; then
-    $DIR/programs/launcher/launcher -k 9 --eosd_binary $EOSD --genesis $DIR/genesis.json
-  fi
-  kill -9 $WALLETD_PROC_ID
-}
-
-cleanup()
-{
-  if [ "$SERVER" == "localhost" ]; then
-    rm -rf tn_data_00
-  fi
-  rm -rf test_wallet_0
-}
-
-# $1 - string that contains "transaction_id": "<trans id>", in it
-# result <trans id> stored in TRANS_ID
-getTransactionId()
-{
-  TRANS_ID="$(echo "$1" | awk '/transaction_id/ {print $2}')"
-  # remove leading/trailing quotes
-  TRANS_ID=${TRANS_ID#\"}
-  TRANS_ID=${TRANS_ID%\",}
-}
-
-# result stored in HEAD_BLOCK_NUM
-getHeadBlockNum()
-{
-  INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT get info)"
-  verifyErrorCode "eosc get info"
-  HEAD_BLOCK_NUM="$(echo "$INFO" | awk '/head_block_num/ {print $2}')"
-  # remove trailing coma
-  HEAD_BLOCK_NUM=${HEAD_BLOCK_NUM%,}
-}
-
-waitForNextBlock()
-{
-  getHeadBlockNum
-  NEXT_BLOCK_NUM=$((HEAD_BLOCK_NUM+1))
-  while [ "$HEAD_BLOCK_NUM" -lt "$NEXT_BLOCK_NUM" ]; do
-    sleep 0.25
-    getHeadBlockNum
-  done
-}
-
-# cleanup from last run
-cleanup
-
-echo "BEGIN" > $TEST_OUTPUT
-echo "TEST_OUTPUT: ${TEST_OUTPUT}"
-echo "SERVER: ${SERVER}"
-echo "PORT: ${PORT}"
-
-INITA_PRV_KEY="5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"
-INITB_PRV_KEY="5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"
-LOG_FILE=eosd_run_test.log
-
-# eosd
-if [ "$SERVER" == "localhost" ]; then
-  $DIR/programs/launcher/launcher --eosd_binary $EOSD  --genesis $DIR/genesis.json
-  verifyErrorCode "launcher"
-  sleep 60
-  count=`grep -c "generated block" tn_data_00/stderr.txt`
-  if [[ $count == 0 ]]; then
-    error "FAILURE - no blocks produced"
-  fi
-fi
-
-# save starting block number
-getHeadBlockNum
-START_BLOCK_NUM=$HEAD_BLOCK_NUM
-
-# create 3 keys
-KEYS="$($DIR/programs/eosc/eosc create key)"
-verifyErrorCode "eosc create key"
-PRV_KEY1="$(echo "$KEYS" | awk '/Private/ {print $3}')"
-PUB_KEY1="$(echo "$KEYS" | awk '/Public/ {print $3}')"
-KEYS="$($DIR/programs/eosc/eosc create key)"
-verifyErrorCode "eosc create key"
-PRV_KEY2="$(echo "$KEYS" | awk '/Private/ {print $3}')"
-PUB_KEY2="$(echo "$KEYS" | awk '/Public/ {print $3}')"
-KEYS="$($DIR/programs/eosc/eosc create key)"
-verifyErrorCode "eosc create key"
-PRV_KEY3="$(echo "$KEYS" | awk '/Private/ {print $3}')"
-PUB_KEY3="$(echo "$KEYS" | awk '/Public/ {print $3}')"
-if [ -z "$PRV_KEY1" ] || [ -z "$PRV_KEY2" ] || [ -z "$PRV_KEY3" ] || [ -z "$PUB_KEY1" ] || [ -z "$PUB_KEY2" ] || [ -z "$PUB_KEY3" ]; then
-  error "FAILURE - create keys"
-fi
-
-#
-# Wallet Tests
-#
-
-# walletd
-$DIR/programs/eos-walletd/eos-walletd --data-dir test_wallet_0 --http-server-address=127.0.0.1:8899 > test_walletd_output.log 2>&1 &
-verifyErrorCode "eos-walletd"
-WALLETD_PROC_ID=$!
-sleep 3
-
-# import into a wallet
-PASSWORD="$($DIR/programs/eosc/eosc --wallet-port 8899 wallet create --name test)"
-verifyErrorCode "eosc wallet create"
-# strip out password from output
-PASSWORD="$(echo "$PASSWORD" | awk '/PW/ {print $1}')"
-# remove leading/trailing quotes
-PASSWORD=${PASSWORD#\"}
-PASSWORD=${PASSWORD%\"}
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet import --name test $PRV_KEY1
-verifyErrorCode "eosc wallet import"
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet import --name test $PRV_KEY2
-verifyErrorCode "eosc wallet import"
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet import --name test $PRV_KEY3
-verifyErrorCode "eosc wallet import"
-
-# create wallet for inita
-PASSWORD_INITA="$($DIR/programs/eosc/eosc --wallet-port 8899 wallet create --name inita)"
-verifyErrorCode "eosc wallet create"
-# strip out password from output
-PASSWORD_INITA="$(echo "$PASSWORD_INITA" | awk '/PW/ {print $1}')"
-# remove leading/trailing quotes
-PASSWORD_INITA=${PASSWORD_INITA#\"}
-PASSWORD_INITA=${PASSWORD_INITA%\"}
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet import --name inita $INITA_PRV_KEY
-verifyErrorCode "eosc wallet import"
-
-# lock wallet
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet lock --name test
-verifyErrorCode "eosc wallet lock"
-
-# unlock wallet
-echo $PASSWORD | $DIR/programs/eosc/eosc --wallet-port 8899 wallet unlock --name test
-verifyErrorCode "eosc wallet unlock"
-
-# lock via lock_all
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet lock_all
-verifyErrorCode "eosc wallet lock_all"
-
-# unlock wallet again
-echo $PASSWORD | $DIR/programs/eosc/eosc --wallet-port 8899 wallet unlock --name test
-verifyErrorCode "eosc wallet unlock"
-
-# wallet list
-OUTPUT=$($DIR/programs/eosc/eosc --wallet-port 8899 wallet list)
-verifyErrorCode "eosc wallet list"
-count=`echo $OUTPUT | grep "test" | grep -c "\*"`
-if [[ $count == 0 ]]; then
-  error "FAILURE - wallet list did not include \*"
-fi
-
-# wallet keys
-OUTPUT=$($DIR/programs/eosc/eosc --wallet-port 8899 wallet keys)
-verifyErrorCode "eosc wallet keys"
-count=`echo $OUTPUT | grep -c "$PRV_KEY1"`
-if [[ $count == 0 ]]; then
-  error "FAILURE - wallet keys did not include $PRV_KEY1"
-fi
-count=`echo $OUTPUT | grep -c "$PRV_KEY2"`
-if [[ $count == 0 ]]; then
-  error "FAILURE - wallet keys did not include $PRV_KEY2"
-fi
-
-# lock via lock_all
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet lock_all
-verifyErrorCode "eosc wallet lock_all"
-
-# unlock wallet inita
-echo $PASSWORD_INITA | $DIR/programs/eosc/eosc --wallet-port 8899 wallet unlock --name inita
-verifyErrorCode "eosc wallet unlock inita"
-OUTPUT=$($DIR/programs/eosc/eosc --wallet-port 8899 wallet keys)
-count=`echo $OUTPUT | grep -c "$INITA_PRV_KEY"`
-if [[ $count == 0 ]]; then
-  error "FAILURE - wallet keys did not include $INITA_PRV_KEY"
-fi
-
-#
-# Account and Transfer Tests
-#
-
-# create new account
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 create account inita testera $PUB_KEY1 $PUB_KEY3)"
-verifyErrorCode "eosc create account"
-waitForNextBlock
-
-# verify account created
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get account testera)"
-verifyErrorCode "eosc get account"
-count=`echo $ACCOUNT_INFO | grep -c "staked_balance"`
-if [ $count == 0 ]; then
-  error "FAILURE - account creation failed: $ACCOUNT_INFO"
-fi
-
-# transfer
-TRANSFER_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 transfer inita testera 975321 "test transfer")  -x 3000"
-verifyErrorCode "eosc transfer"
-
-# verify transfer
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get account testera)"
-count=`echo $ACCOUNT_INFO | grep -c "97.5321"`
-if [ $count == 0 ]; then
-  error "FAILURE - transfer failed: $ACCOUNT_INFO"
-fi
-
-# force transfer
-TRANSFER_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 transfer inita testera 100 "test transfer" -f)  -x 3000"
-verifyErrorCode "eosc force transfer"
-
-# verify force transfer
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get account testera)"
-count=`echo $ACCOUNT_INFO | grep -c "97.5421"`
-if [ $count == 0 ]; then
-  error "FAILURE - transfer failed: $ACCOUNT_INFO"
-fi
-
-
-# create another new account via initb
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 create account initb currency $PUB_KEY2 $PUB_KEY3)"
-verifyErrorCode "eosc create account currency"
-
-# create another new account via inita
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 create account inita exchange $PUB_KEY2 $PUB_KEY3)"
-verifyErrorCode "eosc create account exchange"
-waitForNextBlock
-
-
-## now transfer from testera to currency using keys from testera
-
-# lock via lock_all
-$DIR/programs/eosc/eosc --wallet-port 8899 wallet lock_all
-verifyErrorCode "eosc wallet lock_all"
-
-# unlock wallet
-echo $PASSWORD | $DIR/programs/eosc/eosc --wallet-port 8899 wallet unlock --name test
-verifyErrorCode "eosc wallet unlock"
-
-# transfer
-TRANSFER_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 transfer testera currency 975311 "test transfer a->b")  -x 3000"
-verifyErrorCode "eosc transfer"
-waitForNextBlock
-getTransactionId "$TRANSFER_INFO"
-
-# verify transfer
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get account currency)"
-verifyErrorCode "eosc get account currency"
-count=`echo $ACCOUNT_INFO | grep -c "97.5311"`
-if [ $count == 0 ]; then
-  error "FAILURE - transfer failed: $ACCOUNT_INFO"
-fi
-
-# get accounts via public key
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get accounts $PUB_KEY3)"
-verifyErrorCode "eosc get accounts pub_key3"
-count=`echo $ACCOUNT_INFO | grep -c "testera"`
-if [ $count == 0 ]; then
-  error "FAILURE - get accounts failed: $ACCOUNT_INFO"
-fi
-count=`echo $ACCOUNT_INFO | grep -c "currency"`
-if [ $count == 0 ]; then
-  error "FAILURE - get accounts failed: $ACCOUNT_INFO"
-fi
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get accounts $PUB_KEY1)"
-verifyErrorCode "eosc get accounts pub_key1"
-count=`echo $ACCOUNT_INFO | grep -c "testera"`
-if [ $count == 0 ]; then
-  error "FAILURE - get accounts failed: $ACCOUNT_INFO"
-fi
-count=`echo $ACCOUNT_INFO | grep -c "currency"`
-if [ $count != 0 ]; then
-  error "FAILURE - get accounts failed: $ACCOUNT_INFO"
-fi
-
-# get servant accounts
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get servants inita)"
-verifyErrorCode "eosc get servants inita"
-count=`echo $ACCOUNT_INFO | grep -c "testera"`
-if [ $count == 0 ]; then
-  error "FAILURE - get servants failed: $ACCOUNT_INFO"
-fi
-count=`echo $ACCOUNT_INFO | grep -c "currency"`
-if [ $count != 0 ]; then
-  error "FAILURE - get servants failed: $ACCOUNT_INFO"
-fi
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get servants testera)"
-verifyErrorCode "eosc get servants testera"
-count=`echo $ACCOUNT_INFO | grep -c "testera"`
-if [ $count != 0 ]; then
-  error "FAILURE - get servants failed: $ACCOUNT_INFO"
-fi
-
-# get transaction
-TRANS_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get transaction $TRANS_ID)"
-verifyErrorCode "eosc get transaction trans_id of $TRANS_INFO"
-count=`echo $TRANS_INFO | grep -c "transfer"`
-if [ $count == 0 ]; then
-  error "FAILURE - get transaction trans_id failed: $TRANS_INFO"
-fi
-count=`echo $TRANS_INFO | grep -c "975311"`
-if [ $count == 0 ]; then
-  error "FAILURE - get transaction trans_id failed: $TRANS_INFO"
-fi
-
-# get transactions
-TRANS_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT  --wallet-port 8899 get transactions testera)"
-verifyErrorCode "eosc get transactions testera"
-count=`echo $TRANS_INFO | grep -c "$TRANS_ID"`
-if [ $count == 0 ]; then
-  error "FAILURE - get transactions testera failed: $TRANS_INFO"
-fi
-
-#
-# Currency Contract Tests
-#
-
-# verify no contract in place
-CODE_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get code currency)"
-verifyErrorCode "eosc get code currency"
-# convert to num
-CODE_HASH="$(echo "$CODE_INFO" | awk '/code hash/ {print $3}')"
-CODE_HASH="$(echo $CODE_HASH | awk '{print toupper($0)}')"
-CODE_HASH="$(echo "ibase=16; $CODE_HASH" | bc)"
-if [ $CODE_HASH != 0 ]; then
-  error "FAILURE - get code currency failed: $CODE_INFO"
-fi
-
-# upload a contract
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set contract currency $DIR/contracts/currency/currency.wast $DIR/contracts/currency/currency.abi)"
-verifyErrorCode "eosc set contract currency"
-count=`echo $INFO | grep -c "processed"`
-if [ $count == 0 ]; then
-  error "FAILURE - set contract failed: $INFO"
-fi
-getTransactionId "$INFO"
-
-waitForNextBlock
-# verify transaction exists
-TRANS_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get transaction $TRANS_ID)"
-verifyErrorCode "eosc get transaction trans_id of $TRANS_INFO"
-
-# verify code is set
-CODE_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get code currency)"
-verifyErrorCode "eosc get code currency"
-# convert to num
-CODE_HASH="$(echo "$CODE_INFO" | awk '/code hash/ {print $3}')"
-CODE_HASH="$(echo $CODE_HASH | awk '{print toupper($0)}')"
-CODE_HASH="$(echo "ibase=16; $CODE_HASH" | bc)"
-if [ $CODE_HASH == 0 ]; then
-  error "FAILURE - get code currency failed: $CODE_INFO"
-fi
-
-# verify currency contract has proper initial balance
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get table currency currency account)"
-verifyErrorCode "eosc get table currency account"
-count=`echo $INFO | grep -c "1000000000"`
-if [ $count == 0 ]; then
-  error "FAILURE - get table currency account failed: $INFO"
-fi
-count=`echo $INFO | grep -c "account"`
-if [ $count == 0 ]; then
-  error "FAILURE - get table currency account failed: $INFO"
-fi
-
-# push message to currency contract
-
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 push message currency transfer '{"from":"currency","to":"inita","quantity":50}' --scope currency,inita --permission currency@active)"
-verifyErrorCode "eosc push message currency transfer"
-getTransactionId "$INFO"
-
-# verify transaction exists
-waitForNextBlock
-TRANS_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get transaction $TRANS_ID)"
-verifyErrorCode "eosc get transaction trans_id of $TRANS_INFO"
-
-# read current contract balance
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get table inita currency account)"
-verifyErrorCode "eosc get table currency account"
-count=`echo $ACCOUNT_INFO | grep "balance" | grep -c "50"`
-if [ $count == 0 ]; then
-  error "FAILURE - get table inita account failed: $ACCOUNT_INFO"
-fi
-
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get table currency currency account)"
-verifyErrorCode "eosc get table currency account"
-count=`echo $ACCOUNT_INFO | grep "balance" | grep -c "999999950"`
-if [ $count == 0 ]; then
-  error "FAILURE - get table currency account failed: $ACCOUNT_INFO"
-fi
-
-#
-# Exchange Contract Tests
-#
-
-# upload exchange contract
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set contract exchange $DIR/contracts/exchange/exchange.wast $DIR/contracts/exchange/exchange.abi)"
-verifyErrorCode "eosc set contract exchange"
-count=`echo $INFO | grep -c "processed"`
-if [ $count == 0 ]; then
-  error "FAILURE - set contract exchange failed: $INFO"
-fi
-getTransactionId "$INFO"
-
-#
-# Setting simpledb contract without simpledb account was causing core dump in eosc.
-# Verify eosc generates an error, but does not core dump.
-#
-
-INFO="$( { $DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set contract simpledb $DIR/contracts/simpledb/simpledb.wast $DIR/contracts/simpledb/simpledb.abi ; } 2>&1 )"
-rc=$?
-if [ $rc -eq 0 ] || [ $rc -eq 139 ]; then # 139 SIGSEGV
-  error "FAILURE - $1 returned error code $rc, should have failed to execute."
-fi
-
-#
-# Producer
-#
-
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 create producer testera $PUB_KEY1)"
-verifyErrorCode "eosc create producer"
-getTransactionId "$INFO"
-
-# set permission
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set action permission testera currency transfer active)"
-verifyErrorCode "eosc set action permission set"
-waitForNextBlock
-
-# remove permission
-INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set action permission testera currency transfer null)"
-verifyErrorCode "eosc set action permission delete"
-
-# lock via lock_all
-$DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 wallet lock_all
-verifyErrorCode "eosc wallet lock_all"
-
-# unlock wallet inita
-echo $PASSWORD_INITA | $DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 wallet unlock --name inita
-verifyErrorCode "eosc wallet unlock inita"
-
-# TODO: Approving producers currently not supported
-# approve producer
-# INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set producer inita testera approve)"
-# verifyErrorCode "eosc approve producer"
-
-ACCOUNT_INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 get account inita)"
-verifyErrorCode "eosc get account"
-
-# TODO: Unapproving producers currently not supported
-# unapprove producer
-# INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT --wallet-port 8899 set producer inita testera unapprove)"
-# verifyErrorCode "eosc unapprove producer"
-
-#
-# Proxy
-#
-# not implemented
-
-# should be able to get every block from beginning to end
-getHeadBlockNum
-CURRENT_BLOCK_NUM=$HEAD_BLOCK_NUM
-NEXT_BLOCK_NUM=1
-while [ "$NEXT_BLOCK_NUM" -le "$HEAD_BLOCK_NUM" ]; do
-  INFO="$($DIR/programs/eosc/eosc --host $SERVER --port $PORT get block $NEXT_BLOCK_NUM)"
-  verifyErrorCode "eosc get block"
-  NEXT_BLOCK_NUM=$((NEXT_BLOCK_NUM+1))
-done
-
-if [ "$SERVER" == "localhost" ]; then
-  ASSERT_ERRORS="$(grep Assert tn_data_00/stderr.txt)"
-  count=`grep -c Assert tn_data_00/stderr.txt`
-  if [ "$count" != "0" ]; then
-    error "FAILURE - Assert in tn_data_00/stderr.txt"
-  fi
-fi
-
-killAll
-cleanup
-echo "END" >> $TEST_OUTPUT
-echo SUCCESS!