- 30 8月, 2022 1 次提交
-
-
由 wannomore 提交于
解决 tms320f28379d bsp 启动的问题。主要改动如下。 修正context.s中汇编代码错误。在旧版的代码中,操作数为32位而汇编命令却使用了针对16位数据的命令MOV,导致程序在某些情况无法正常启动线程。 由于C28x的平台下,SP只支持16bit寻址,所以用于线程空间存放的heap以及ebss段都需要放在低16位的空间,针对这个问题修改了CMD文件。此外还增加基于CMD文件基于RAM的支持,方便调试。 新增rtdef.h中RT_SECTION,RT_USED,ALIGN和RT_WEAK的定义。旧版bsp中这些定义为空,导致INIT_EXPORT注册的函数失效。 修改程序启动代码,在程序入口直接调用原生启动代码 以上改动在LAUNCHXL-F28379D 通过了测试。
-
- 27 8月, 2022 1 次提交
-
-
由 liYang~ 提交于
-
- 25 8月, 2022 3 次提交
-
-
由 winfenggao 提交于
UART_FLAG_TC 不能在中断里CLEAR; 因为函数 static int stm32_putc(struct rt_serial_device *serial, char c)里发送完成后 while 循环等这个标志退出,中断服务函数CLEAR后,此处进入死循环
-
由 liYang~ 提交于
* 修改Kconfig的不足 * update gpio driver * formatting code
-
由 mysterywolf 提交于
增加ROMFS,FATFS和未来的LittleFS将挂载在ROMFS上 初步增加littlefs文件系统,尚未完全实现一键化配置
-
- 24 8月, 2022 2 次提交
- 23 8月, 2022 4 次提交
-
-
由 liYang~ 提交于
* add ch32v307 lib * fix scons
-
由 Yunjie Gu 提交于
-
由 Thomas_Fly 提交于
* Update README.md * rename as max32660-evsys Co-authored-by: Meco Man <920369182@qq.com>
-
由 mysterywolf 提交于
-
- 22 8月, 2022 3 次提交
-
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
- 21 8月, 2022 2 次提交
-
-
由 Yunjie Gu 提交于
* compile_ok Issues fixed: (1) update .config: select FINSH_USING_SYMTAB (2) add rt_size_t in rtconfig_project.h (3) fix finsh problems of using sym table (4) update .project to include ipc source codes. Todo list: (1) automate the build source selection of ccs and reconcile it with scons * change compiler * msh can run now the key step is to swap the order of rt_interrupt_nest -- and RT_OBJECT_HOOK_CALL(rt_interrupt_leave_hook,()) in irq.c. This is an improvised solution and an issue has been raised. * Update 2837x_FLASH_lnk_cpu1.cmd The original one is also fine. Just to make it more rigorous since FSymTab is in data section. * update readme.md Complier selection and maintainer update. Co-authored-by: YuQi <qiyu_sjtu@163.com>
-
由 斌cazure 提交于
* 完善can驱动中断处理 优化can波特率采样率,采样点在75%以上 增加新的can驱动宏定义支持,避免编译错误 * Update drv_can.c Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
-
- 18 8月, 2022 1 次提交
-
-
由 mysterywolf 提交于
-
- 17 8月, 2022 4 次提交
- 16 8月, 2022 3 次提交
-
-
由 liuxianliang 提交于
-
由 mysterywolf 提交于
-
-
- 15 8月, 2022 9 次提交
-
-
由 Not Black Magic 提交于
Fix BSP bug: -Function naming conflict in drv_rtc.c, rename get/set_timestamp to imxrt_hp_get/set_timestamp, which conflicted with rtc.c/.h framework.
-
由 Sherman 提交于
* [renesas/ra2l1-cpk] add Captouch板载触摸按键配置说明.md * Update Captouch板载触摸按键配置说明.md * [renesas/drv_wdt.c] Fix error code issues [renesas/drv_i2c.c] add hardware i2c driver * [update] drv_wdt.c,drv_i2c.c Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
-
由 o777788 提交于
-
由 o777788 提交于
增加1170系列SDRAM时钟配置 修复sdram中memheap自动初始化时机错误导致被assert的情况 Co-authored-by: Meco Man <920369182@qq.com>
-
由 o777788 提交于
* Update Kconfig 增加RT1170双路网络选项 * Update SConscript 增加RTL8211F驱动选项支持 * Update SConstruct 去掉外设目录 * Add files via upload 增加PHY芯片RTL8211F驱动 * Update drv_rtl8211f.c * format code Co-authored-by: Meco Man <920369182@qq.com>
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
-
由 mysterywolf 提交于
report in slack group
-
- 14 8月, 2022 7 次提交
-
-
由 Fan Yang 提交于
* Add CANFD support and correct typos - Added CANFD required fields to can.h - Fixed typos in can.h and can.c - Corrected all the projects affected by the typo - Fixed wrong line-ending in some affected can driver files Signed-off-by: NFan YANG <fan.yang@hpmicro.com> * update Signed-off-by: NFan YANG <fan.yang@hpmicro.com> Co-authored-by: Meco Man <920369182@qq.com>
-
由 woody 提交于
华芯微特SWM341芯片的bsp支持包 * 修改dac.c函数名称错误 * delete swm320-lq100 bsp * 修复sdio读写块的地址偏移问题 * add synwit swm341 bsp * 修复gcc下启动文件错误 * 为测试用例添加说明
-
由 mysterywolf 提交于
report in #4184
-
由 mysterywolf 提交于
Co-authored-by: Nxinyi.gao <xinyi.gao@nxp.com>
-
由 mysterywolf 提交于
Some users' computer cannot find the path of VS and will cause failure. Just skip this step.
-
由 mysterywolf 提交于
* [lvgl] PKG_USING_LV_MUSIC_DEMO defaults by yes * [lvgl] remove specific suppport for imxrt1060 https://github.com/lvgl/lvgl/pull/3566
-
由 mysterywolf 提交于
this is report in slack group: - I had to do a small fix in board/linker_scripts/link.lds file. line 81, should be: ivt_begin = ORIGIN(m_boot_data) + LENGTH(m_boot_data); (add a space between ivt_begin and "=“). - For unknown reason I had to set DEMO_PANEL_RK043FN66HS as default in imxrt1060-nxp-evk/board/Kconfig Leaving the DEMO_PANEL_RK043FN02H was not working even after selecting RK043FN66HS in menuconfig. The result was touch not working without this change as a wrong driver was being pick.
-