Skip to content

R
rt-thread

码匠许师傅 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 01a17f4f 编写于 作者: wuyangyong's avatar wuyangyong
浏览文件
操作

update lpc178x bsp 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1764 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 5de50e14
隐藏空白更改
内联 并排
Showing with 245 addition and 217 deletion
bsp/lpc178x/application.c
浏览文件 @ 01a17f4f
......@@ -40,19 +40,19 @@
/* thread phase init */
void rt_init_thread_entry(void *parameter)
{
unsigned int count=0;
while (1)
{
/* led1 on */
rt_kprintf("on count : %d\r\n",count);
count++;
rt_thread_delay( RT_TICK_PER_SECOND/2 ); /* sleep 0.5 second and switch to other thread */
/* led1 off */
rt_kprintf("led off\r\n");
rt_thread_delay( RT_TICK_PER_SECOND/2 );
}
// unsigned int count=0;
//
// while (1)
// {
// /* led1 on */
// rt_kprintf("on count : %d\r\n",count);
// count++;
// rt_thread_delay( RT_TICK_PER_SECOND/2 ); /* sleep 0.5 second and switch to other thread */
//
// /* led1 off */
// rt_kprintf("led off\r\n");
// rt_thread_delay( RT_TICK_PER_SECOND/2 );
// }
/* Filesystem Initialization */
#ifdef RT_USING_DFS
......
bsp/lpc178x/drivers/board.h
浏览文件 @ 01a17f4f
......@@ -20,6 +20,7 @@
#define RT_UART_RX_BUFFER_SIZE 64
#define RT_USING_UART0
#define RT_USING_UART1
#define RT_USING_UART2
#define CONSOLE_DEVICE "uart1"
#define FINSH_DEVICE_NAME "uart1"
......
bsp/lpc178x/drivers/uart.c
浏览文件 @ 01a17f4f
......@@ -46,231 +46,255 @@
/*@{*/
#define UART_BAUDRATE 115200
#define LPC_UART LPC_UART0
#define UART_IRQn UART0_IRQn
struct rt_uart_lpc
{
struct rt_device parent;
LPC_UART_TypeDef * UART;
IRQn_Type UART_IRQn;
/* buffer for reception */
rt_uint8_t read_index, save_index;
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
};
#ifdef RT_USING_UART0
struct rt_uart_lpc uart0_device;
#endif
#ifdef RT_USING_UART1
struct rt_uart_lpc uart1_device;
#endif
void UART0_IRQHandler(void)
{
// rt_ubase_t level, iir;
// struct rt_uart_lpc* uart = &uart_device;
//
// /* read IIR and clear it */
// iir = LPC_UART->IIR;
//
rt_ubase_t level, iir;
struct rt_uart_lpc* uart = &uart0_device;
/* enter interrupt */
rt_interrupt_enter();
/* read IIR and clear it */
iir = uart->UART->IIR;
iir >>= 1; /* skip pending bit in IIR */
iir &= 0x07; /* check bit 1~3, interrupt identification */
if (iir == IIR_RDA) /* Receive Data Available */
{
/* Receive Data Available */
uart->rx_buffer[uart->save_index] = uart->UART->RBR;
level = rt_hw_interrupt_disable();
uart->save_index ++;
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
uart->save_index = 0;
rt_hw_interrupt_enable(level);
/* invoke callback */
if(uart->parent.rx_indicate != RT_NULL)
{
rt_size_t length;
if (uart->read_index > uart->save_index)
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
else
length = uart->save_index - uart->read_index;
uart->parent.rx_indicate(&uart->parent, length);
}
}
/* leave interrupt */
rt_interrupt_leave();
return;
}
void UART1_IRQHandler(void)
{
rt_ubase_t level, iir;
struct rt_uart_lpc* uart = &uart1_device;
/* enter interrupt */
rt_interrupt_enter();
/* read IIR and clear it */
iir = uart->UART->IIR;
// iir >>= 1; /* skip pending bit in IIR */
// iir &= 0x07; /* check bit 1~3, interrupt identification */
//
// if (iir == IIR_RDA) /* Receive Data Available */
// {
// /* Receive Data Available */
// uart->rx_buffer[uart->save_index] = LPC_UART->RBR;
//
// level = rt_hw_interrupt_disable();
// uart->save_index ++;
// if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
// uart->save_index = 0;
// rt_hw_interrupt_enable(level);
//
// /* invoke callback */
// if(uart->parent.rx_indicate != RT_NULL)
// {
// rt_size_t length;
// if (uart->read_index > uart->save_index)
// length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
// else
// length = uart->save_index - uart->read_index;
//
// uart->parent.rx_indicate(&uart->parent, length);
// }
// }
//
// return;
if (iir == UART_IIR_INTID_RDA) /* Receive Data Available */
{
/* Receive Data Available */
uart->rx_buffer[uart->save_index] = uart->UART->RBR;
level = rt_hw_interrupt_disable();
uart->save_index ++;
if (uart->save_index >= RT_UART_RX_BUFFER_SIZE)
uart->save_index = 0;
rt_hw_interrupt_enable(level);
/* invoke callback */
if(uart->parent.rx_indicate != RT_NULL)
{
rt_size_t length;
if (uart->read_index > uart->save_index)
length = RT_UART_RX_BUFFER_SIZE - uart->read_index + uart->save_index;
else
length = uart->save_index - uart->read_index;
uart->parent.rx_indicate(&uart->parent, length);
}
}
/* leave interrupt */
rt_interrupt_leave();
return;
}
static rt_err_t rt_uart_init (rt_device_t dev)
{
// rt_uint32_t Fdiv;
// rt_uint32_t pclkdiv, pclk;
//
// /* Init UART Hardware */
// if (LPC_UART == LPC_UART0)
// {
// LPC_PINCON->PINSEL0 &= ~0x000000F0;
// LPC_PINCON->PINSEL0 |= 0x00000050; /* RxD0 is P0.3 and TxD0 is P0.2 */
// /* By default, the PCLKSELx value is zero, thus, the PCLK for
// all the peripherals is 1/4 of the SystemFrequency. */
// /* Bit 6~7 is for UART0 */
// pclkdiv = (LPC_SC->PCLKSEL0 >> 6) & 0x03;
// switch ( pclkdiv )
// {
// case 0x00:
// default:
// pclk = SystemCoreClock/4;
// break;
// case 0x01:
// pclk = SystemCoreClock;
// break;
// case 0x02:
// pclk = SystemCoreClock/2;
// break;
// case 0x03:
// pclk = SystemCoreClock/8;
// break;
// }
//
// LPC_UART0->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
// Fdiv = ( pclk / 16 ) / UART_BAUDRATE; /*baud rate */
// LPC_UART0->DLM = Fdiv / 256;
// LPC_UART0->DLL = Fdiv % 256;
// LPC_UART0->LCR = 0x03; /* DLAB = 0 */
// LPC_UART0->FCR = 0x07; /* Enable and reset TX and RX FIFO. */
// }
// else if ((LPC_UART1_TypeDef*)LPC_UART == LPC_UART1)
// {
// LPC_PINCON->PINSEL4 &= ~0x0000000F;
// LPC_PINCON->PINSEL4 |= 0x0000000A; /* Enable RxD1 P2.1, TxD1 P2.0 */
//
// /* By default, the PCLKSELx value is zero, thus, the PCLK for
// all the peripherals is 1/4 of the SystemFrequency. */
// /* Bit 8,9 are for UART1 */
// pclkdiv = (LPC_SC->PCLKSEL0 >> 8) & 0x03;
// switch ( pclkdiv )
// {
// case 0x00:
// default:
// pclk = SystemCoreClock/4;
// break;
// case 0x01:
// pclk = SystemCoreClock;
// break;
// case 0x02:
// pclk = SystemCoreClock/2;
// break;
// case 0x03:
// pclk = SystemCoreClock/8;
// break;
// }
//
// LPC_UART1->LCR = 0x83; /* 8 bits, no Parity, 1 Stop bit */
// Fdiv = ( pclk / 16 ) / UART_BAUDRATE ; /*baud rate */
// LPC_UART1->DLM = Fdiv / 256;
// LPC_UART1->DLL = Fdiv % 256;
// LPC_UART1->LCR = 0x03; /* DLAB = 0 */
// LPC_UART1->FCR = 0x07; /* Enable and reset TX and RX FIFO. */
// }
//
// /* Ensure a clean start, no data in either TX or RX FIFO. */
// while (( LPC_UART->LSR & (LSR_THRE|LSR_TEMT)) != (LSR_THRE|LSR_TEMT) );
// while ( LPC_UART->LSR & LSR_RDR )
// {
// Fdiv = LPC_UART->RBR; /* Dump data from RX FIFO */
// }
// LPC_UART->IER = IER_RBR | IER_THRE | IER_RLS; /* Enable UART interrupt */
struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
UART_CFG_Type UART_ConfigStruct;
#ifdef RT_USING_UART0
if( uart->UART == LPC_UART0 )
{
/*
* Initialize UART0 pin connect
* P0.2: TXD
* P0.3: RXD
*/
PINSEL_ConfigPin(0, 2, 1);
PINSEL_ConfigPin(0, 2, 1);
UART_ConfigStruct.Baud_rate = 115200;
UART_ConfigStruct.Databits = UART_DATABIT_8;
UART_ConfigStruct.Parity = UART_PARITY_NONE;
UART_ConfigStruct.Stopbits = UART_STOPBIT_1;
UART_Init( uart->UART, &UART_ConfigStruct);
// Enable UART Transmit
UART_TxCmd( uart->UART, ENABLE);
UART_IntConfig( uart->UART, UART_INTCFG_RLS, ENABLE);
}
#endif
#ifdef RT_USING_UART1
if( ((LPC_UART1_TypeDef *)uart->UART) == LPC_UART1 )
{
/*
* Initialize UART1 pin connect
* P3.16: TXD
* P3.17: RXD
*/
PINSEL_ConfigPin(3, 16, 3);
PINSEL_ConfigPin(3, 17, 3);
UART_ConfigStruct.Baud_rate = 115200;
UART_ConfigStruct.Databits = UART_DATABIT_8;
UART_ConfigStruct.Parity = UART_PARITY_NONE;
UART_ConfigStruct.Stopbits = UART_STOPBIT_1;
UART_Init( uart->UART,&UART_ConfigStruct);
// Enable UART Transmit
UART_TxCmd( uart->UART, ENABLE);
UART_IntConfig( uart->UART, UART_INTCFG_RLS, ENABLE);
UART_IntConfig( uart->UART, UART_INTCFG_RBR, ENABLE);
}
#endif
#ifdef RT_USING_UART2
if( uart->UART == LPC_UART2 )
{
}
#endif
return RT_EOK;
}
static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
{
// RT_ASSERT(dev != RT_NULL);
// if (dev->flag & RT_DEVICE_FLAG_INT_RX)
// {
// /* Enable the UART Interrupt */
// NVIC_EnableIRQ(UART_IRQn);
// }
struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
RT_ASSERT(dev != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Enable the UART Interrupt */
NVIC_EnableIRQ( uart->UART_IRQn );
}
return RT_EOK;
}
static rt_err_t rt_uart_close(rt_device_t dev)
{
// RT_ASSERT(dev != RT_NULL);
// if (dev->flag & RT_DEVICE_FLAG_INT_RX)
// {
// /* Disable the UART Interrupt */
// NVIC_DisableIRQ(UART_IRQn);
// }
struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
RT_ASSERT(dev != RT_NULL);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
/* Disable the UART Interrupt */
NVIC_DisableIRQ( uart->UART_IRQn );
}
return RT_EOK;
}
static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
{
// rt_uint8_t* ptr;
// struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
// RT_ASSERT(uart != RT_NULL);
//
// /* point to buffer */
// ptr = (rt_uint8_t*) buffer;
// if (dev->flag & RT_DEVICE_FLAG_INT_RX)
// {
// while (size)
// {
// /* interrupt receive */
// rt_base_t level;
//
// /* disable interrupt */
// level = rt_hw_interrupt_disable();
// if (uart->read_index != uart->save_index)
// {
// *ptr = uart->rx_buffer[uart->read_index];
//
// uart->read_index ++;
// if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
// uart->read_index = 0;
// }
// else
// {
// /* no data in rx buffer */
//
// /* enable interrupt */
// rt_hw_interrupt_enable(level);
// break;
// }
//
// /* enable interrupt */
// rt_hw_interrupt_enable(level);
//
// ptr ++;
// size --;
// }
//
// return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
// }
rt_uint8_t* ptr;
struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
RT_ASSERT(uart != RT_NULL);
/* point to buffer */
ptr = (rt_uint8_t*) buffer;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
while (size)
{
/* interrupt receive */
rt_base_t level;
/* disable interrupt */
level = rt_hw_interrupt_disable();
if (uart->read_index != uart->save_index)
{
*ptr = uart->rx_buffer[uart->read_index];
uart->read_index ++;
if (uart->read_index >= RT_UART_RX_BUFFER_SIZE)
uart->read_index = 0;
}
else
{
/* no data in rx buffer */
/* enable interrupt */
rt_hw_interrupt_enable(level);
break;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
ptr ++;
size --;
}
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
return 0;
}
static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
{
// rt_uint32_t i = size;
// char *ptr;
// ptr = (char*)buffer;
//
// while(i)
// {
// UART_SendByte((LPC_UART_TypeDef*)LPC_UART1,*ptr);
// i--;
// ptr++;
// }
// return size;
struct rt_uart_lpc *uart = (struct rt_uart_lpc*)dev;
char *ptr;
ptr = (char*)buffer;
......@@ -282,9 +306,11 @@ static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer
{
if (*ptr == '\n')
{
while (!(uart->UART->LSR & UART_LSR_THRE));
UART_SendByte( uart->UART,'\r');
}
while (!(uart->UART->LSR & UART_LSR_THRE));
UART_SendByte( uart->UART,*ptr);
ptr ++;
size --;
......@@ -292,44 +318,45 @@ static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer
}
else
{
while ( size != 0 )
{
UART_SendByte( uart->UART,*ptr);
ptr++;
size--;
}
}
UART_Send( uart->UART, (uint8_t *)buffer, size, BLOCKING);
}
return (rt_size_t) ptr - (rt_size_t) buffer;
}
void rt_hw_uart_init(void)
{
#ifdef RT_USING_UART1
struct rt_uart_lpc* uart;
UART_CFG_Type UART_ConfigStruct;
/*
* Initialize UART1 pin connect
* P3.16: TXD
* P3.17: RXD
*/
PINSEL_ConfigPin(3, 16, 3);
PINSEL_ConfigPin(3, 17, 3);
#ifdef RT_USING_UART0
/* get uart device */
uart = &uart0_device;
uart0_device.UART = LPC_UART0;
uart0_device.UART_IRQn = UART0_IRQn;
UART_ConfigStruct.Baud_rate = 115200;
UART_ConfigStruct.Databits = UART_DATABIT_8;
UART_ConfigStruct.Parity = UART_PARITY_NONE;
UART_ConfigStruct.Stopbits = UART_STOPBIT_1;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
rt_memset(uart->rx_buffer, 0, sizeof(uart->rx_buffer));
uart->read_index = uart->save_index = 0;
UART_Init((LPC_UART_TypeDef *)LPC_UART1,&UART_ConfigStruct);
/* device interface */
uart->parent.init = rt_uart_init;
uart->parent.open = rt_uart_open;
uart->parent.close = rt_uart_close;
uart->parent.read = rt_uart_read;
uart->parent.write = rt_uart_write;
uart->parent.control = RT_NULL;
uart->parent.user_data = RT_NULL;
// Enable UART Transmit
UART_TxCmd((LPC_UART_TypeDef *)LPC_UART1, ENABLE);
rt_device_register(&uart->parent,
"uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_STREAM | RT_DEVICE_FLAG_INT_RX);
#endif
#ifdef RT_USING_UART1
/* get uart device */
uart = &uart1_device;
uart1_device.UART = (LPC_UART_TypeDef *)LPC_UART1;
uart1_device.UART_IRQn = UART1_IRQn;
/* device initialization */
uart->parent.type = RT_Device_Class_Char;
......
bsp/lpc178x/startup.c
浏览文件 @ 01a17f4f
......@@ -85,12 +85,12 @@ void rtthread_startup(void)
#ifdef RT_USING_HEAP
#ifdef __CC_ARM
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x10008000);
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)(0x10000000 + 1024*64));
#elif __ICCARM__
rt_system_heap_init(__segment_end("HEAP"), (void*)0x10008000);
rt_system_heap_init(__segment_end("HEAP"), (void*)(0x10000000 + 1024*64));
#else
/* init memory system */
rt_system_heap_init((void*)&__bss_end, (void*)0x10008000);
rt_system_heap_init((void*)&__bss_end, (void*)(0x10000000 + 1024*64));
#endif
#endif
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或