Cc: Steve French <smfrench@gmail.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.

In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by populating the page cache without marking affected pages dirty
after a successful write directly to the server.

Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

by using cifs_invalidate_mapping rather than invalidate_remote_inode
in cifs_oplock_break - this invalidates all inode pages and resets
fscache cookies.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

We don't need to permit a write to the area locked with a read lock
by any process including the process that issues the write.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

If we netogiate mandatory locking style, have a read lock and try
to set a write lock we end up with a write lock in vfs cache and
no lock in cifs lock cache - that's wrong. Fix it by returning
from cifs_setlk immediately if a error occurs during setting a lock.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

that reacquires byte-range locks when a file is reopened.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Commit eddb079d created a regression in the writepages codepath.
Previously, whenever it needed to check the size of the file, it did so
by consulting the inode->i_size field directly. With that patch, the
i_size was fetched once on entry into the writepages code and that value
was used henceforth.

If the file is changing size though (for instance, if someone is writing
to it or has truncated it), then that value is likely to be wrong. This
can lead to data corruption. Pages past the EOF at the time that the
writepages call was issued may be silently dropped and ignored because
cifs_writepages wrongly assumes that the file must have been truncated
in the interim.

Fix cifs_writepages to properly fetch the size from the inode->i_size
field instead to properly account for this possibility.

Original bug report is here:

    https://bugzilla.kernel.org/show_bug.cgi?id=50991Reported-and-Tested-by: NMaxim Britov <ungifted01@gmail.com>
Reviewed-by: NSuresh Jayaraman <sjayaraman@suse.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>	#arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

FL_CLOSE is quite common when you close a file on which you hold a
lock. The spurious "Unknown lock flags" message in cFYI is
confusing in this case.
Reported-by: NAlexander Bokovoy <abokovoy@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Now we walk though cifsFileInfo's list for every incoming lease
break and look for an equivalent there. That approach misses lease
breaks that come just after an open response - we don't have time
to populate new cifsFileInfo structure to the list. Fix this by
adding new list of pending opens and look for a lease there if we
didn't find it in the list of cifsFileInfo structures.
Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

When we have a file opened with read oplock and we are writing a data
to this file, we need to store the data in the cache and then send to
the server to ensure that the next read operation will get a coherent
data.

Also mark it as CONFIG_CIFS_SMB2 because it's more suitable for SMB2
code but can fix some CIFS problems too (when server delays sending
an oplock break after a write request). We can drop this ifdefs
dependence in future.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

if server supports them and we need oplocks.
Signed-off-by: NPavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Currently CIFS code accept read/write ops on mandatory locked area
when two processes use the same file descriptor - it's wrong.
Fix this by serializing io and brlock operations on the inode.
Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

and allow several processes to walk through the lock list and read
can_cache_brlcks value if they are not going to modify them.
Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>

Now we need to lock/unlock a spinlock while processing brlock ops
on the inode. Move brlocks of a fid to a separate list and attach
all such lists to the inode. This let us not hold a spinlock.
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>

The array is no longer needed. We just need a single kvec to hold the
header for signature checking.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Replace the "marshal_iov" function with a "read_into_pages" function.
That function will copy the read data off the socket and into the
pages array, kmapping and reading pages one at a time.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

We'll need an array to put into a smb_rqst, so convert this into an array
instead of (ab)using the lru list_head.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Eventually, we're going to want to append a list of pages to
cifs_readdata instead of a list of kvecs. To prepare for that, turn
the kvec array allocation into a separate one and just keep a
pointer to it in the readdata.
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Reviewed-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

This is help us to extend the code for future protocols that can use
another fid mechanism (as SMB2 that has it divided into two parts:
persistent and violatile).

Also rename variables and refactor the code around the changes.
Reviewed-by: NJeff Layton <jlayton@samba.org>
Signed-off-by: NPavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: NSteve French <smfrench@gmail.com>

Cc: <stable@vger.kernel.org>
Signed-off-by: NPavel Shilovsky <pshilovsky@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>