Some SATA controllers (sata_sil) use 0xff to indicate port not ready
status, not port empty.  As libata interprets 0xff as port empty, this
causes unnecessary reset failure and retry.  Don't consider 0xff as
port empty if SStatus is available and indicates that port is online.
Signed-off-by: Ntejun Heo <htejun@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Indan Zupancic <indan@nul.nu>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Acer Aspire 2023WLMi uses short 40c cable.  Add quirk for it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: Steve H. <mail.pandor@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

- Rename sis_port_base to sis_old_port_base() so nobody uses it for new
generation controllers in error.
- Use byte size operations where it is cleaner for mode setup
- Fix a couple of masking errors on certai chip revs when setting speeds
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We have a revision that isn't correctly claimed as two drivers both go
for it: Fix the test accordingly. Noticed originally by Bill Nottingham.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6:
  NFS: Fix nfs_direct_dirty_pages()
  NFS: Fix handful of compiler warnings in direct.c
  NFS: Avoid a deadlock situation on write

This reverts commit 722385f7 (or commit
3f271008, it's your choice ;), since the
same patch to Documentation/HOWTO got added twice because it just kept
applying cleanly.

Noted by Qi Yong.

Cc: Qi Yong <qiyong@fc-cn.com>
Acked-by: NDiego Calleja <diegocg@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] geode: Fix in-place operations and set key

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: add maintainer for ARM Primecell controller
  mmc: add maintainer for iMX MMC interface
  mmc: Add maintainers for TI OMAP MMC interface
  mmc: mark unmaintained drivers
  mmc: clean up unused parts of block driver

With irqpoll enabled, trying to test the IRQF_IRQPOLL flag in the
actions would cause a NULL pointer dereference if no action was
installed (for example, the driver might have been unloaded with
interrupts still pending).

So be a bit more careful about testing the flag by making sure to test
for that case.

(The actual _change_ is trivial, the patch is more than a one-liner
because I rewrote the testing to also be much more readable.

Original (discarded) bugfix by Bernhard Walle.

Cc: Bernhard Walle <bwalle@suse.de>
Tested-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We only need to dirty the pages that were actually read in.

Also convert nfs_direct_dirty_pages() to call set_page_dirty() instead of
set_page_dirty_lock(). A call to lock_page() is unacceptable in an rpciod
callback function.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch fixes a couple of signage issues that were causing an Oops
when running the LTP diotest4 test. get_user_pages() returns a signed
error, hence we need to be careful when comparing with the unsigned
number of pages from data->npages.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When processes are allowed to attempt to lock a non-contiguous range of nfs
write requests, it is possible for generic_writepages to 'wrap round' the
address space, and call writepage() on a request that is already locked by
the same process.

We avoid the deadlock by checking if the page index is contiguous with the
list of nfs write requests that is already held in our
nfs_pageio_descriptor prior to attempting to lock a new request.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow in-place crypto operations.  Also remove the coherent user flag
(we use it automagically now), and by default use the user written
key rather then the HW hidden key - this makes crypto just work without
any special considerations, and thats OK, since its our only usage
model.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Russell King handles this driver.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Pavel Pisa takes on the role of administrating this driver.
Signed-off-by: NPavel Pisa <ppisa@pikron.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Carlos Aguiar and Anderson Briglia are interested in making sure
the driver works for existing boards as they have access to them,
and Syed Khasim can make it work for new omaps (2430, 3430).
Signed-off-by: NSyed Khasim <x0khasim@ti.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Most of the host controller drivers in the MMC layer lacks an
official maintainer. Make sure this is mentioned in MAINTAINERS
in case someone wants to pick up the ball.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Remove dead code and unused structs from the block driver.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Textual clarifications (and fix an off-by-one error) based on feedback
mostly from Jeremy Fitzhardinge.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

  WARNING: arch/i386/mach-generic/built-in.o(.data+0xc4): Section mismatch: reference to .init.text: (between 'apic_bigsmp' and 'cpu.4905')

This appears to be resolvable by removing all the __init and __initdata
qualifiers from arch/i386/mach-generic/bigsmp.c
Signed-off-by: NWilliam Irwin <bill.irwin@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Squash these:

drivers/isdn/hardware/eicon/message.c: In function 'api_put':
drivers/isdn/hardware/eicon/message.c:536: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'plci_free_msg_in_queue':
drivers/isdn/hardware/eicon/message.c:1035: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'data_b3_req':
drivers/isdn/hardware/eicon/message.c:3121: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c:3154: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'callback':
drivers/isdn/hardware/eicon/message.c:4060: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/message.c: In function 'nl_ind':
drivers/isdn/hardware/eicon/message.c:7137: warning: cast from pointer to integer of different size

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

squish these:

drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferSet':
drivers/isdn/hardware/eicon/capifunc.c:192: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferGet':
drivers/isdn/hardware/eicon/capifunc.c:197: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:198: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:200: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'TransmitBufferFree':
drivers/isdn/hardware/eicon/capifunc.c:205: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c:206: warning: cast from pointer to integer of different size
drivers/isdn/hardware/eicon/capifunc.c: In function 'sendf':
drivers/isdn/hardware/eicon/capifunc.c:304: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c:304: warning: cast to pointer from integer of different size
drivers/isdn/hardware/eicon/capifunc.c:321: warning: cast to pointer from integer of different size

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The omap_uwire controller driver handles SPI_CPHA incorrectly;
It should mean:

  CPHA=0 ... sample at leading edge of clock
  CPHA=1 ... sample at trailing edge of clock

This bug has been masked by inverse bugs in layered drivers;
and was uncovered by running some of them on non-OMAP hardware.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix various grammatical issues in Documentation/memory-barriers.txt.

Cc: "Robert P. J. Day" <rpjday@mindspring.com>
Signed-off-by: NJarek Poplawski <jarkao2@o2.pl>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The check (boot_cpu_data.x86 == 3) in atomic_add_return() and
local_add_return() fails, when those operations are used before
boot_cpu_data is filled in.

Change the check to (boot_cpu_data.x86 <= 3) to fix this.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The NOHZ patch contains a check for softirqs pending when a CPU goes idle.
The BUG is unrelated to NOHZ, it just was made visible by the NOHZ patch.
The BUG showed up mainly on P4 / hyperthreading enabled machines which lead
the investigations into the wrong direction in the first place.  The real
cause is in cond_resched_softirq():

cond_resched_softirq() is enabling softirqs without invoking the softirq
daemon when softirqs are pending.  This leads to the warning message in the
NOHZ idle code:

t1 runs softirq disabled code on CPU#0
interrupt happens, softirq is raised, but deferred (softirqs disabled)
t1 calls cond_resched_softirq()
	enables softirqs via _local_bh_enable()
	calls schedule()
t2 runs
t1 is migrated to CPU#1
t2 is done and invokes idle()
NOHZ detects the pending softirq

Fix: change _local_bh_enable() to local_bh_enable() so the softirq
daemon is invoked.

Thanks to Anant Nitya for debugging this with great patience !
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=7482.

It sets USB snooping on 4G space for PowerPC platforms without
CONFIG_NOT_COHERENT_CACHE defined.
Reported-by: NStefan Meyer <reyems@telkomsa.net>
Signed-off-by: NLi Yang <leoli@freescale.com>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document the available clocksources per platform and move clocksource= into
the correct (alpha) location in the file.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delay writing 0's out in eCryptfs after a seek past the end of the file
until data is actually written.

http://www.opengroup.org/onlinepubs/009695399/functions/lseek.html

``The lseek() function shall not, by itself, extend the size of a
file.''

Without this fix, applications that lseek() past the end of the file without
writing will experience unexpected behavior.
Signed-off-by: NMichael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Another coverity patch i forgot to resend, original thread here
http://marc.info/?l=linux-kernel&m=115144559823592&w=2

In case drive == N_DRIVE, we get one past the drive_params array.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add name file needed by lm_sensors user-space applications in applesmc
sysfs tree.

Cc: Soeren Sonnenburg <kernel@nn7.de>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch (as875) adds error-checking to the callers of hisax_register().
It also changes an error pathway in that routine, making it return an error
code rather than 0.

This fixes Bugzilla #7960.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NKarsten Keil <kkeil@suse.de>
Cc: Martin Bachem <info@colognechip.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Final clearification of the pivot_root mechanism, which brings this
document really up-to-date.
Signed-off-by: NDomenico Andreoli <cavok@dandreoli.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adding a drive to a linear array seems to have stopped working, due to changes
elsewhere in md, and insufficient ongoing testing...

So the patch to make linear hot-add work in the first place introduced a
subtle bug elsewhere that interracts poorly with older version of mdadm.

This fixes it all up.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is possible that real data or metadata follows the bitmap without full page
alignment.

So limit the last write to be only the required number of bytes, rounded up to
the hard sector size of the device.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a raid0 has a component device larger than 4TB, and is accessed on a 32bit
machines, then as 'chunk' is unsigned long,

   chunk << chunksize_bits

can overflow (this can be as high as the size of the device in KB).  chunk
itself will not overflow (without triggering a BUG).

So change 'chunk' to be 'sector_t, and get rid of the 'BUG' as it becomes
impossible to hit.

Cc: "Jeff Zheng" <Jeff.Zheng@endace.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's not sufficiently documented that CONFIG_HOTPLUG_CPU is required for
suspend/hibernation on SMP.

Point out the non-obvious.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no reason i2o_max_drivers must be a power of two.  This patch
eliminates such a constraint.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Maximum number of I2O drivers which could be registered is configurable by
max_drivers module parameter.

But the module parameter is ignored and default value (I2O_MAX_DRIVERS = 8)
is used in the loops to notify all registered drivers.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i2o_driver_register() initalizes event queue for driver only when
drv->event is set.  So similarly the event queue should be destroyed only
when drv->event is set in the error path.  Otherwise destroy_workqueue()
will called with NULL.

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>