Currently ARC_HAS_LLSC can be influenced by platform for SMP only using
ARC_HAS_COH_LLSC. For !SMP it defaults to "y".

It turns out that some customers can't support it all, even in UP.
So we change the semantics, and use a negative dependency ARC_CANT_LLSC.
Any platform (independent of SMP or !SMP) can select it to disable LLSC.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Since ARC port was not yet upstream, we missed a bunch of cross-arch
Kconfig removals:

* GENERIC_SIGALTSTACK: d64008a8 "burying unused conditionals"
* HAVE_IRQ_WORK: 6147a9d8 "irq_work: Remove CONFIG_HAVE_IRQ_WORK"
* ARCH_NO_VIRT_TO_BUS: e0cf2ef484 "arch Kconfig: centralise
                                   CONFIG_ARCH_NO_VIRT_TO_BUS"
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Reported-by: NJames Hogan <james.hogan@imgtec.com>

All the current platforms can work with 0x8000_0000 based dma_addr_t
since the Bus Bridges typically ignore the top bit (the only excpetion
was Angel4 PCI-AHB bridge which we no longer care for).
That way we don't need plat-specific cpu-addr to bus-addr conversion.

Hooks still provided - just in case a platform has an obscure device
which say needs 0 based bus address.

That way <asm/dma_mapping.h> no longer needs to unconditinally include
<plat/dma_addr.h>

Also verfied that on Angel4 board, other peripherals (IDE-disk / EMAC)
work fine with 0x8000_0000 based dma addresses.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This is more natural and is now doable since the choice constructs are
gone.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This mini patchseries addresses the lack of multi-platform-image support
in ARC port.

Older build system only supported one platform(soc) to build at a time
and further only one board of that platform could be built. There was no
technical reason for that - we just didn't have the need.

So the first step towards multi-platform (and multi-board) builds it to
allow build system to do that.

So as applicable, <choice .. endchoice> => <menu .. endmenu>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Implement ioremap_prot() to allow mapping IO memory with variable
protection
via TLB.

Implementing this allows the /dev/mem driver to use its generic access()
VMA callback, which in turn allows ptrace to examine data in memory
mapped regions mapped via /dev/mem, such as Arc DCCM.

The end result is that it is possible to examine values of variables
placed into DCCM in user space programs via GDB.

CC: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
CC: Noam Camus <noamc@ezchip.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This allows ARC Target to do I/O to host in absence of any peripherals
whatsoever, assisted by Metaware Hostlink facility.

Further we have a FUSE based filesystem which makes us mount/access host
filesystem on target and do fops.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* Includes mapping of CCMs in address space
* Annotations to move arbitrary code/data into CCM
* Moving some of the critical code/data into CCM
* Runtime detection/reporting
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NMischa Jonker <mjonker@synopsys.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Acked-by: NJason Wessel <jason.wessel@windriver.com>

ARC700 doesn't natively support unaligned access, but can be emulated
-Unaligned Access Exception
-Disassembly at the Fault address to find the exact insn (long/short)

Also per Arnd's comment, we runtime control it using 2 sysctl knobs:
* SYSCTL_ARCH_UNALIGN_ALLOW: Runtime enable/disble
* SYSCTL_ARCH_UNALIGN_NO_WARN: Warn on each emulation attempt

Originally contributed by Tim Yao <tim.yao@amlogic.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Tim Yao <tim.yao@amlogic.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Origin port done by Rajeshwar Ranga
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

-Originally written by Rajeshwar Ranga
-Derived off of generic unwinder in 2.6.19 and adapted to ARC
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>

ARC common code to enable a SMP system + ISS provided SMP extensions.

ARC700 natively lacks SMP support, hence some of the core features are
are only enabled if SoCs have the necessary h/w pixie-dust. This
includes:
-Inter Processor Interrupts (IPI)
-Cache coherency
-load-locked/store-conditional
...

The low level exception handling would be completely broken in SMP
because we don't have hardware assisted stack switching. Thus a fair bit
of this code is repurposing the MMU_SCRATCH reg for event handler
prologues to keep them re-entrant.

Many thanks to Rajeshwar Ranga for his initial "major" contributions to
SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help
with resurrecting that in 3.2 kernel (2012).

Note that this platform code is again singleton design pattern - so
multiple SMP platforms won't build at the moment - this deficiency is
addressed in subsequent patches within this series.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>

There is a bit of hack/kludge right now where we disable preemption if a
L2 (High prio) IRQ is taken while L1 (Low prio) is active.

Need to revisit this
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Robert Richter <rric@kernel.org>
Cc: oprofile-list@lists.sf.net
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

* mem size now runtime configured (prev CONFIG_ARC_PLAT_SDRAM_SIZE)
* core cpu clk runtime configured (prev CONFIG_ARC_PLAT_CLK)
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>

This is minimal infrastructure needed for devicetree work.
It uses an a sample "skeleton" devicetree - embedded in kernel image -
to print the board, manufacturer by parsing the top-level "compatible"
string.

As of now we don't need any additional "board" specific "machine_desc".

TODO: support interpreting the command line as boot-loader passed dtb
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: James Hogan <james.hogan@imgtec.com>
Reviewed-by: NRob Herring <rob.herring@calxeda.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Includes following fixes courtesy review by Al-Viro

* Tracer poke to Callee-regs were lost

  Before going off into do_signal( ) we save the user-mode callee regs
  (as they are not saved by default as part of pt_regs). This is to make
  sure that that a Tracer (if tracing related signal) is able to do likes
  of PEEKUSR(callee-reg).

  However in return path we were simply discarding the user-mode callee
  regs, which would break a POKEUSR(callee-reg) from a tracer.

* Issue related to multiple syscall restarts are addressed in next patch
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: NJonas Bonn <jonas@southpole.se>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>

This includes support for generic clone/for/vfork/execve
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Arnd in his review pointed out that arch Kconfig organisation has several
deficiencies:

* Build time entries for things which can be runtime extracted from DT
  (e.g. SDRAM size, core clk frequency..)
* Not multi-platform-image-build friendly (choice .. endchoice constructs)
* cpu variants support (750/770) is exclusive.

The first 2 have been fixed in subsequent patches.
Due to the nature of the 750 and 770, it is not possible to build for
both together, w/o special runtime glue code which would hurt
performance.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>