Memory reserved for crashkernel could be large.  So we should not allocate
this memory bottom up from the end of kernel image.

When SRAT is parsed, we will be able to know which memory is hotpluggable,
and we can avoid allocating this memory for the kernel.  So reorder
reserve_crashkernel() after SRAT is parsed.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Linux kernel cannot migrate pages used by the kernel.  As a result,
kernel pages cannot be hot-removed.  So we cannot allocate hotpluggable
memory for the kernel.

In a memory hotplug system, any numa node the kernel resides in should be
unhotpluggable.  And for a modern server, each node could have at least
16GB memory.  So memory around the kernel image is highly likely
unhotpluggable.

ACPI SRAT (System Resource Affinity Table) contains the memory hotplug
info.  But before SRAT is parsed, memblock has already started to allocate
memory for the kernel.  So we need to prevent memblock from doing this.

So direct memory mapping page tables setup is the case.
init_mem_mapping() is called before SRAT is parsed.  To prevent page
tables being allocated within hotpluggable memory, we will use bottom-up
direction to allocate page tables from the end of kernel image to the
higher memory.

Note:
As for allocating page tables in lower memory, TJ said:

: This is an optional behavior which is triggered by a very specific kernel
: boot param, which I suspect is gonna need to stick around to support
: memory hotplug in the current setup unless we add another layer of address
: translation to support memory hotplug.

As for page tables may occupy too much lower memory if using 4K mapping
(CONFIG_DEBUG_PAGEALLOC and CONFIG_KMEMCHECK both disable using >4k
pages), TJ said:

: But as I said in the same paragraph, parsing SRAT earlier doesn't solve
: the problem in itself either.  Ignoring the option if 4k mapping is
: required and memory consumption would be prohibitive should work, no?
: Something like that would be necessary if we're gonna worry about cases
: like this no matter how we implement it, but, frankly, I'm not sure this
: is something worth worrying about.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create a new function memory_map_top_down to factor out of the top-down
direct memory mapping pagetable setup.  This is also a preparation for the
following patch, which will introduce the bottom-up memory mapping.  That
said, we will put the two ways of pagetable setup into separate functions,
and choose to use which way in init_mem_mapping, which makes the code more
clear.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Linux kernel cannot migrate pages used by the kernel.  As a result,
kernel pages cannot be hot-removed.  So we cannot allocate hotpluggable
memory for the kernel.

ACPI SRAT (System Resource Affinity Table) contains the memory hotplug
info.  But before SRAT is parsed, memblock has already started to allocate
memory for the kernel.  So we need to prevent memblock from doing this.

In a memory hotplug system, any numa node the kernel resides in should be
unhotpluggable.  And for a modern server, each node could have at least
16GB memory.  So memory around the kernel image is highly likely
unhotpluggable.

So the basic idea is: Allocate memory from the end of the kernel image and
to the higher memory.  Since memory allocation before SRAT is parsed won't
be too much, it could highly likely be in the same node with kernel image.

The current memblock can only allocate memory top-down.  So this patch
introduces a new bottom-up allocation mode to allocate memory bottom-up.
And later when we use this allocation direction to allocate memory, we
will limit the start address above the kernel.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[Problem]

The current Linux cannot migrate pages used by the kernel because of the
kernel direct mapping.  In Linux kernel space, va = pa + PAGE_OFFSET.
When the pa is changed, we cannot simply update the pagetable and keep the
va unmodified.  So the kernel pages are not migratable.

There are also some other issues will cause the kernel pages not
migratable.  For example, the physical address may be cached somewhere and
will be used.  It is not to update all the caches.

When doing memory hotplug in Linux, we first migrate all the pages in one
memory device somewhere else, and then remove the device.  But if pages
are used by the kernel, they are not migratable.  As a result, memory used
by the kernel cannot be hot-removed.

Modifying the kernel direct mapping mechanism is too difficult to do.  And
it may cause the kernel performance down and unstable.  So we use the
following way to do memory hotplug.

[What we are doing]

In Linux, memory in one numa node is divided into several zones.  One of
the zones is ZONE_MOVABLE, which the kernel won't use.

In order to implement memory hotplug in Linux, we are going to arrange all
hotpluggable memory in ZONE_MOVABLE so that the kernel won't use these
memory.  To do this, we need ACPI's help.

In ACPI, SRAT(System Resource Affinity Table) contains NUMA info.  The
memory affinities in SRAT record every memory range in the system, and
also, flags specifying if the memory range is hotpluggable.  (Please refer
to ACPI spec 5.0 5.2.16)

With the help of SRAT, we have to do the following two things to achieve our
goal:

1. When doing memory hot-add, allow the users arranging hotpluggable as
   ZONE_MOVABLE.
   (This has been done by the MOVABLE_NODE functionality in Linux.)

2. when the system is booting, prevent bootmem allocator from allocating
   hotpluggable memory for the kernel before the memory initialization
   finishes.

The problem 2 is the key problem we are going to solve. But before solving it,
we need some preparation. Please see below.

[Preparation]

Bootloader has to load the kernel image into memory.  And this memory must
be unhotpluggable.  We cannot prevent this anyway.  So in a memory hotplug
system, we can assume any node the kernel resides in is not hotpluggable.

Before SRAT is parsed, we don't know which memory ranges are hotpluggable.
 But memblock has already started to work.  In the current kernel,
memblock allocates the following memory before SRAT is parsed:

setup_arch()
 |->memblock_x86_fill()            /* memblock is ready */
 |......
 |->early_reserve_e820_mpc_new()   /* allocate memory under 1MB */
 |->reserve_real_mode()            /* allocate memory under 1MB */
 |->init_mem_mapping()             /* allocate page tables, about 2MB to map 1GB memory */
 |->dma_contiguous_reserve()       /* specified by user, should be low */
 |->setup_log_buf()                /* specified by user, several mega bytes */
 |->relocate_initrd()              /* could be large, but will be freed after boot, should reorder */
 |->acpi_initrd_override()         /* several mega bytes */
 |->reserve_crashkernel()          /* could be large, should reorder */
 |......
 |->initmem_init()                 /* Parse SRAT */

According to Tejun's advice, before SRAT is parsed, we should try our best
to allocate memory near the kernel image.  Since the whole node the kernel
resides in won't be hotpluggable, and for a modern server, a node may have
at least 16GB memory, allocating several mega bytes memory around the
kernel image won't cross to hotpluggable memory.

[About this patchset]

So this patchset is the preparation for the problem 2 that we want to
solve.  It does the following:

1. Make memblock be able to allocate memory bottom up.
   1) Keep all the memblock APIs' prototype unmodified.
   2) When the direction is bottom up, keep the start address greater than the
      end of kernel image.

2. Improve init_mem_mapping() to support allocate page tables in
   bottom up direction.

3. Introduce "movable_node" boot option to enable and disable this
   functionality.

This patch (of 6):

Create a new function __memblock_find_range_top_down to factor out of
top-down allocation from memblock_find_in_range_node.  This is a
preparation because we will introduce a new bottom-up allocation mode in
the following patch.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement mmap base randomization for the bottom up direction, so ASLR
works for both mmap layouts on s390.  See also commit df54d6fa ("x86
get_unmapped_area(): use proper mmap base for bottom-up direction").
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is more or less the generic variant of commit 41aacc1e ("x86
get_unmapped_area: Access mmap_legacy_base through mm_struct member").

So effectively architectures which use an own arch_pick_mmap_layout()
implementation but call the generic arch_get_unmapped_area() now can
also randomize their mmap_base.

All architectures which have an own arch_pick_mmap_layout() and call the
generic arch_get_unmapped_area() (arm64, s390, tile) currently set
mmap_base to TASK_UNMAPPED_BASE.  This is also true for the generic
arch_pick_mmap_layout() function.  So this change is a no-op currently.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add SetPageReclaim() before __swap_writepage() so that page can be moved
to the tail of the inactive list, which can avoid unnecessary page
scanning as this page was reclaimed by swap subsystem before.
Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
Reviewed-by: NBob Liu <bob.liu@oracle.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When there are processes heavily creating small files while sync(2) is
running, it can easily happen that quite some new files are created
between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2).  That can happen
especially if there are several busy filesystems (remember that sync
traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one
fs before starting it on another fs).  Because WB_SYNC_ALL pass is slow
(e.g.  causes a transaction commit and cache flush for each inode in
ext3), resulting sync(2) times are rather large.

The following script reproduces the problem:

  function run_writers
  {
    for (( i = 0; i < 10; i++ )); do
      mkdir $1/dir$i
      for (( j = 0; j < 40000; j++ )); do
        dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null
      done &
    done
  }

  for dir in "$@"; do
    run_writers $dir
  done

  sleep 40
  time sync

Fix the problem by disregarding inodes dirtied after sync(2) was called
in the WB_SYNC_ALL pass.  To allow for this, sync_inodes_sb() now takes
a time stamp when sync has started which is used for setting up work for
flusher threads.

To give some numbers, when above script is run on two ext4 filesystems
on simple SATA drive, the average sync time from 10 runs is 267.549
seconds with standard deviation 104.799426.  With the patched kernel,
the average sync time from 10 runs is 2.995 seconds with standard
deviation 0.096.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NFengguang Wu <fengguang.wu@intel.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Soft dirty bit allows us to track which pages are written since the last
clear_ref (by "echo 4 > /proc/pid/clear_refs".) This is useful for
userspace applications to know their memory footprints.

Note that the kernel exposes this flag via bit[55] of /proc/pid/pagemap,
and the semantics is not a default one (scheduled to be the default in the
near future.) However, it shifts to the new semantics at the first
clear_ref, and the users of soft dirty bit always do it before utilizing
the bit, so that's not a big deal.  Users must avoid relying on the bit in
page-types before the first clear_ref.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This flag shows that the VMA is "newly created" and thus represents
"dirty" in the task's VM.

You can clear it by "echo 4 > /proc/pid/clear_refs."
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During swapoff the frontswap_map was NULL-ified before calling
frontswap_invalidate_area().  However the frontswap_invalidate_area()
exits early if frontswap_map is NULL.  Invalidate was never called
during swapoff.

This patch moves frontswap_map_set() in swapoff just after calling
frontswap_invalidate_area() so outside of locks (swap_lock and
swap_info_struct->lock).  This shouldn't be a problem as during swapon
the frontswap_map_set() is called also outside of any locks.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 248ac0e1 ("mm/vmalloc: remove guard page from between vmap
blocks") had the side effect of making vmap_area.va_end member point to
the next vmap_area.va_start.  This was creating an artificial reference
to vmalloc'ed objects and kmemleak was rarely reporting vmalloc() leaks.

This patch marks the vmap_area containing pointers explicitly and
reduces the min ref_count to 2 as vm_struct still contains a reference
to the vmalloc'ed object.  The kmemleak add_scan_area() function has
been improved to allow a SIZE_MAX argument covering the rest of the
object (for simpler calling sites).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We pass the number of pages which hold page structs of a memory section
to free_map_bootmem().  This is right when !CONFIG_SPARSEMEM_VMEMMAP but
wrong when CONFIG_SPARSEMEM_VMEMMAP.  When CONFIG_SPARSEMEM_VMEMMAP, we
should pass the number of pages of a memory section to free_map_bootmem.

So the fix is removing the nr_pages parameter.  When
CONFIG_SPARSEMEM_VMEMMAP, we directly use the prefined marco
PAGES_PER_SECTION in free_map_bootmem.  When !CONFIG_SPARSEMEM_VMEMMAP,
we calculate page numbers needed to hold the page structs for a memory
section and use the value in free_map_bootmem().

This was found by reading the code.  And I have no machine that support
memory hot-remove to test the bug now.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For below functions,

- sparse_add_one_section()
- kmalloc_section_memmap()
- __kmalloc_section_memmap()
- __kfree_section_memmap()

they are always invoked to operate on one memory section, so it is
redundant to always pass a nr_pages parameter, which is the page numbers
in one section.  So we can directly use predefined macro PAGES_PER_SECTION
instead of passing the parameter.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memory.numa_stat file was not hierarchical.  Memory charged to the
children was not shown in parent's numa_stat.

This change adds the "hierarchical_" stats to the existing stats.  The
new hierarchical stats include the sum of all children's values in
addition to the value of the memcg.

Tested: Create cgroup a, a/b and run workload under b.  The values of
b are included in the "hierarchical_*" under a.

$ cd /sys/fs/cgroup
$ echo 1 > memory.use_hierarchy
$ mkdir a a/b

Run workload in a/b:
$ (echo $BASHPID >> a/b/cgroup.procs && cat /some/file && bash) &

The hierarchical_ fields in parent (a) show use of workload in a/b:
$ cat a/memory.numa_stat
total=0 N0=0 N1=0 N2=0 N3=0
file=0 N0=0 N1=0 N2=0 N3=0
anon=0 N0=0 N1=0 N2=0 N3=0
unevictable=0 N0=0 N1=0 N2=0 N3=0
hierarchical_total=908 N0=552 N1=317 N2=39 N3=0
hierarchical_file=850 N0=549 N1=301 N2=0 N3=0
hierarchical_anon=58 N0=3 N1=16 N2=39 N3=0
hierarchical_unevictable=0 N0=0 N1=0 N2=0 N3=0

$ cat a/b/memory.numa_stat
total=908 N0=552 N1=317 N2=39 N3=0
file=850 N0=549 N1=301 N2=0 N3=0
anon=58 N0=3 N1=16 N2=39 N3=0
unevictable=0 N0=0 N1=0 N2=0 N3=0
hierarchical_total=908 N0=552 N1=317 N2=39 N3=0
hierarchical_file=850 N0=549 N1=301 N2=0 N3=0
hierarchical_anon=58 N0=3 N1=16 N2=39 N3=0
hierarchical_unevictable=0 N0=0 N1=0 N2=0 N3=0
Signed-off-by: NYing Han <yinghan@google.com>
Signed-off-by: NGreg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Refactor mem_control_numa_stat_show() to use a new stats structure for
smaller and simpler code.  This consolidates nearly identical code.

    text      data      bss        dec      hex   filename
  8,137,679 1,703,496 1,896,448 11,737,623 b31a17 vmlinux.before
  8,136,911 1,703,496 1,896,448 11,736,855 b31717 vmlinux.after
Signed-off-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NYing Han <yinghan@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use more appropriate NUMA_NO_NODE instead of -1
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Khugepaged will scan/free HPAGE_PMD_NR normal pages and replace with a
hugepage which is allocated from the node of the first scanned normal
page, but this policy is too rough and may end with unexpected result to
upper users.

The problem is the original page-balancing among all nodes will be
broken after hugepaged started.  Thinking about the case if the first
scanned normal page is allocated from node A, most of other scanned
normal pages are allocated from node B or C..  But hugepaged will always
allocate hugepage from node A which will cause extra memory pressure on
node A which is not the situation before khugepaged started.

This patch try to fix this problem by making khugepaged allocate
hugepage from the node which have max record of scaned normal pages hit,
so that the effect to original page-balancing can be minimized.

The other problem is if normal scanned pages are equally allocated from
Node A,B and C, after khugepaged started Node A will still suffer extra
memory pressure.

Andrew Davidoff reported a related issue several days ago.  He wanted
his application interleaving among all nodes and "numactl
--interleave=all ./test" was used to run the testcase, but the result
wasn't not as expected.

  cat /proc/2814/numa_maps:
  7f50bd440000 interleave:0-3 anon=51403 dirty=51403 N0=435 N1=435 N2=435 N3=50098

The end result showed that most pages are from Node3 instead of
interleave among node0-3 which was unreasonable.

This patch also fix this issue by allocating hugepage round robin from
all nodes have the same record, after this patch the result was as
expected:

  7f78399c0000 interleave:0-3 anon=51403 dirty=51403 N0=12723 N1=12723 N2=13235 N3=12722

The simple testcase is like this:

int main() {
	char *p;
	int i;
	int j;

	for (i=0; i < 200; i++) {
		p = (char *)malloc(1048576);
		printf("malloc done\n");

		if (p == 0) {
			printf("Out of memory\n");
			return 1;
		}
		for (j=0; j < 1048576; j++) {
			p[j] = 'A';
		}
		printf("touched memory\n");

		sleep(1);
	}
	printf("enter sleep\n");
	while(1) {
		sleep(100);
	}
}

[akpm@linux-foundation.org: make last_khugepaged_target_node local to khugepaged_find_target_node()]
Reported-by: NAndrew Davidoff <davidoff@qedmf.net>
Tested-by: NAndrew Davidoff <davidoff@qedmf.net>
Signed-off-by: NBob Liu <bob.liu@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move alloc_hugepage() to a better place, no need for a seperate #ifndef
CONFIG_NUMA
Signed-off-by: NBob Liu <bob.liu@oracle.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andrew Davidoff <davidoff@qedmf.net>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NChristian Hesse <mail@eworm.de>
Acked-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't warn twice in __vmalloc_area_node and __vmalloc_node_range if
__vmalloc_area_node allocation failure.  This patch reverts commit
46c001a2 ("mm/vmalloc.c: emit the failure message before return").
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The VM_UNINITIALIZED/VM_UNLIST flag introduced by f5252e00 ("mm:
avoid null pointer access in vm_struct via /proc/vmallocinfo") is used
to avoid accessing the pages field with unallocated page when
show_numa_info() is called.

This patch moves the check just before show_numa_info in order that some
messages still can be dumped via /proc/vmallocinfo.  This patch reverts
commit d157a558 ("mm/vmalloc.c: check VM_UNINITIALIZED flag in
s_show instead of show_numa_info");
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a race window between vmap_area tear down and show vmap_area
information.

	A                                                B

remove_vm_area
spin_lock(&vmap_area_lock);
va->vm = NULL;
va->flags &= ~VM_VM_AREA;
spin_unlock(&vmap_area_lock);
						spin_lock(&vmap_area_lock);
						if (va->flags & (VM_LAZY_FREE | VM_LAZY_FREEZING))
							return 0;
						if (!(va->flags & VM_VM_AREA)) {
							seq_printf(m, "0x%pK-0x%pK %7ld vm_map_ram\n",
								(void *)va->va_start, (void *)va->va_end,
								va->va_end - va->va_start);
							return 0;
						}
free_unmap_vmap_area(va);
	flush_cache_vunmap
	free_unmap_vmap_area_noflush
		unmap_vmap_area
		free_vmap_area_noflush
			va->flags |= VM_LAZY_FREE

The assumption !VM_VM_AREA represents vm_map_ram allocation is
introduced by d4033afd ("mm, vmalloc: iterate vmap_area_list,
instead of vmlist, in vmallocinfo()").

However, !VM_VM_AREA also represents vmap_area is being tear down in
race window mentioned above.  This patch fix it by don't dump any
information for !VM_VM_AREA case and also remove (VM_LAZY_FREE |
VM_LAZY_FREEING) check since they are not possible for !VM_VM_AREA case.
Suggested-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The caller address has already been set in set_vmalloc_vm(), there's no
need to set it again in __vmalloc_area_node.
Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mpol_to_str() should not fail.  Currently, it either fails because the
string buffer is too small or because a string hasn't been defined for a
mempolicy mode.

If a new mempolicy mode is introduced and no string is defined for it,
just warn and return "unknown".

If the buffer is too small, just truncate the string and return, the
same behavior as snprintf().

This also fixes a bug where there was no NULL-byte termination when doing
*p++ = '=' and *p++ ':' and maxlen has been reached.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use more appropriate NUMA_NO_NODE instead of -1 in all archs' module_alloc()
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Chen Gong pointed out that set/unset_migratetype_isolate() was done in
different functions in mm/memory-failure.c, which makes the code less
readable/maintainable.  So this patch does it in soft_offline_page().

With this patch, we get to hold lock_memory_hotplug() longer but it's
not a problem because races between memory hotplug and soft offline are
very rare.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: NChen, Gong <gong.chen@linux.intel.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cpu_up() has #ifdef CONFIG_MEMORY_HOTPLUG code blocks, which call
mem_online_node() to put its node online if offlined and then call
build_all_zonelists() to initialize the zone list.

These steps are specific to memory hotplug, and should be managed in
mm/memory_hotplug.c.  lock_memory_hotplug() should also be held for the
whole steps.

For this reason, this patch replaces mem_online_node() with
try_online_node(), which performs the whole steps with
lock_memory_hotplug() held.  try_online_node() is named after
try_offline_node() as they have similar purpose.

There is no functional change in this patch.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On large memory machines it can take a few minutes to get through
free_all_bootmem().

Currently, when free_all_bootmem() calls __free_pages_memory(), the number
of contiguous pages that __free_pages_memory() passes to the buddy
allocator is limited to BITS_PER_LONG.  BITS_PER_LONG was originally
chosen to keep things similar to mm/nobootmem.c.  But it is more efficient
to limit it to MAX_ORDER.

       base   new  change
8TB    202s  172s   30s
16TB   401s  351s   50s

That is around 1%-3% improvement on total boot time.

This patch was spun off from the boot time rfc Robin and I had been
working on.
Signed-off-by: NRobin Holt <robin.m.holt@gmail.com>
Signed-off-by: NNathan Zimmer <nzimmer@sgi.com>
Cc: Robin Holt <robinmholt@linux.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use helper function to check if we need to deal with oom condition.
Signed-off-by: NQiang Huang <h.huangqiang@huawei.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use "pfn_to_nid(pfn)" instead of "page_to_nid(pfn_to_page(pfn))".
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A is_memblock_offlined() return or 1 means memory block is offlined, but
is_memblock_offlined_cb() returning 1 means memory block is not offlined,
this will confuse somebody, so rename the function.
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Acked-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use "if (zone->present_pages)" instead of "if (zone->present_pages)".
Simplify the code, no functional change.
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use "pgdat_end_pfn()" instead of "pgdat->node_start_pfn +
pgdat->node_spanned_pages".  Simplify the code, no functional change.
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use "pgdat_end_pfn()" instead of "pgdat->node_start_pfn +
pgdat->node_spanned_pages".  Simplify the code, no functional change.
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 13ece886 ("thp: transparent hugepage config choice"),
transparent hugepage support is disabled by default, and
TRANSPARENT_HUGEPAGE_ALWAYS is configured when TRANSPARENT_HUGEPAGE=y.

And since commit d39d33c3 ("thp: enable direct defrag"), defrag is
enable for all transparent hugepage page faults by default, not only in
MADV_HUGEPAGE regions.
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The callers of free_pgd_range() and hugetlb_free_pgd_range() don't hold
page table locks.  The comments seems to be obsolete, so let's remove
them.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>