Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver fglrx setups audio and ACR packets after basic initialization,
which sounds sane, do the same.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Closed source driver fglrx seems to enable infoframes and audio packets
at the end, which makes sense, do the same.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Message and feedback buffers must be at start of
VRAM, not at start of address space.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just disabling the mem requests should be enough, but
that doesn't seem to work correctly on efi systems.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=57567
https://bugs.freedesktop.org/show_bug.cgi?id=43655
https://bugzilla.kernel.org/show_bug.cgi?id=56441

v2: blank displays first, then disable.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Just disabling the mem requests should be enough, but
that doesn't seem to work correctly on efi systems.

v2: blank displays first, then disable.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to wait for the new addresses to take affect before
re-enabling the MC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to wait for the new addresses to take affect before
re-enabling the MC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Properly wait for the next vblank region.  The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Properly wait for the next vblank region.  The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Properly wait for the next vblank region.  The previous
code didn't always wait long enough depending on the timing.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/tegra: Changes for v3.10-rc1

The bulk of this pull-request is the host1x series that has been in the
works for a few months. The current implementation looks good and has
been tested by several independent parties. So far no issues have been
found. To be on the safe side, the new Tegra-specific DRM IOCTLs depend
on staging in order to give some amount of flexibility to change them
just in case. The plan is to remove that dependency once more userspace
exists to verify the adequacy of the IOCTLs.

Currently only the 2D engine is supported, but patches are in the works
to enable 3D support on top of this framework as well. Various bits of
open-source userspace exist to test the 2D and 3D support[0]. This is
still a bit immature but it allows to verify that the kernel interfaces
work properly.

To round things off there are two smaller cleanup patches, one of them
adding a new pixel format and the other removing a redundent Kconfig
dependency.

[0]: https://github.com/grate-driver

* tag 'drm/tegra/for-3.10' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: don't depend on OF
  drm/tegra: Support the XBGR8888 pixelformat
  drm/tegra: Add gr2d device
  gpu: host1x: drm: Add memory manager and fb
  gpu: host1x: Remove second host1x driver
  gpu: host1x: drm: Rename host1x to host1x_drm
  drm/tegra: Move drm to live under host1x
  gpu: host1x: Add debug support
  gpu: host1x: Add channel support
  gpu: host1x: Add syncpoint wait and interrupts
  gpu: host1x: Add host1x driver

ARCH_TEGRA always enabled OF, so there's no need for any driver to
depend on it.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

While at it, also include the RGB565 pixelformat in the list of formats
supported by overlays.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>

Add client driver for 2D device, and IOCTLs to pass work to host1x
channel for 2D.

Also adds functions that can be called to access sync points from
DRM.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

This patch introduces a memory manager for tegra drm and moves
existing parts to use it. As cma framebuffer helpers can no more
be used, this patch adds also a separate framebuffer driver for
tegra.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Remove second host1x driver, and bind tegra-drm to the new host1x
driver. The logic to parse device tree and track clients is moved
to drm.c.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Both host1x and drm drivers have host1x structures. This patch
renames the host1x structure under drm to follow name host1x_drm.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Make drm part of host1x driver.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for host1x debugging. Adds debugfs entries, and dumps
channel state to UART in case of stuck job.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for host1x client modules, and host1x channels to submit
work to the clients.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add support for sync point interrupts, and sync point wait. Sync
point wait used interrupts for unblocking wait.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Add host1x, the driver for host1x and its client unit 2D. The Tegra
host1x module is the DMA engine for register access to Tegra's
graphics- and multimedia-related modules. The modules served by
host1x are referred to as clients. host1x includes some other
functionality, such as synchronization.
Signed-off-by: NArto Merilainen <amerilainen@nvidia.com>
Signed-off-by: NTerje Bergstrom <tbergstrom@nvidia.com>
Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Tested-by: NErik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>

Test whether the pixel format changes in the mode set handler, and
perform a full mode set instead of a mode set base if it does.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A page flip is not a mode set, changing the frame buffer pixel format
doesn't make sense and isn't handled by most drivers anyway. Disallow
it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Inki writes:
      This is initial pull request for Exynos. It includes a big change
       that it makes drm_display_mode for timings parameters to be used
       for exynos4 and exynos5 commonly and cleans up unnecessary codes.
       And also it adds device tree support for fimd to get timing values
       and interrupt source from dts file.

       In addition, one more patch, device tree support feature for Exynos
       FIMC, is being reviewed. This patch was posted a little ago like below,
            http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg17568.html

       So we are going to request git pull one more time after reviewed.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: prepare FIMD clocks
  Revert "of/exynos_g2d: Add Bindings for exynos G2D driver"
  drm/exynos: drm_connector: Fix error check condition
  drm/exynos: drm_rotator: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: mixer: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: hdmi: Fix incorrect usage of IS_ERR_OR_NULL
  drm/exynos: change the method for getting the interrupt
  drm/exynos: enable OF_VIDEOMODE and FB_MODE_HELPERS for exynos drm fimd
  drm/exynos: Add display-timing node parsing using video helper function
  drm/exynos: hdmi: move mode_fixup to drm common hdmi
  drm/exynos: hdmi: using drm_display_mode timings for exynos4

Daniel writes:
As promised a stash of (mostly) fixes. Two pieces of non-fixes included:
- A notch more gtt refactoring from Ben, beating to death with igt in our
  nightly testing.
- Support for display display-less server chips (again from Ben). New hw
  support which is only likely to break itself ;-)

Otherwise just tons of fixes:
- hpd irq storm mitigation from Egbert Eich. Your -next tree already has
  the infrastructure, this here just supplies the logic.
- sdvo hw state check fix from Egbert Eich
- fb cb tune settings for the pch pll clocks on cpt/ppt
- "Bring a bigger gun" coherence workaround for multi-threade, mulit-core
  & thrashing tiled gtt cpu access from Chris.
- Update haswell mPHY code.
- l3$ caching for context objects on ivb/hsw (Chris).
- dp aux refclock fix for haswell (Jani)
- moar overclocking fixes for snb/ivb (Ben)
- ecobits ppgtt pte caching control fixes from Ville
- fence stride check fixes and limit improvements (Ville)
- fix up crtc force restoring, potentially resulting in tons of hw state
  check WARNs
- OOPS fix for NULL derefencing of fb pointers when force-restoring a crtc
  when other crtcs are disabled and the force-restored crtc is _not_ the
  first one.
- Fix pfit disabling on gen2/3.
- Haswell ring freq scaling fixes (Chris).
- backlight init/teardown fix (failed eDP init killed the lvds backlight)
  from Jani
- cpt/ppt fdi polarity fixes from Paulo (should help a lot of the FDI link
  train failures).
- And a bunch of smaller things all over.
* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (56 commits)
  drm/i915: fix bpc vs. bpp confusion in intel_crtc_compute_config
  drm/i915: move cpu_transcoder to the pipe configuration
  drm/i915: preserve the PBC bits of TRANS_CHICKEN2
  drm/i915: set CPT FDI RX polarity bits based on VBT
  drm/i915: Add Reenable Timer to turn Hotplug Detection back on (v4)
  drm/i915: Disable HPD interrupt on pin when irq storm is detected (v3)
  drm/i915: Mask out the HPD irq bits before setting them individually.
  drm/i915: (re)init HPD interrupt storm statistics
  drm/i915: Add HPD IRQ storm detection (v5)
  drm/i915: WARN when LPT-LP is not paired with ULT CPU
  drm/i915: don't intel_crt_init on any ULT machines
  drm/i915: remove comment about IVB link training from intel_pm.c
  drm/i915: VLV doesn't have LLC
  drm/i915: Scale ring, rather than ia, frequency on Haswell
  drm/i915: shorten debugfs output simple attributes
  drm/i915: Fixup pfit disabling for gen2/3
  drm/i915: Fixup Oops in the pipe config computation
  drm/i915: ensure single initialization and cleanup of backlight device
  drm/i915: don't touch the PF regs if the power well is down
  drm/i915: add intel_using_power_well
  ...

While migrating to common clock framework (CCF), I found that the FIMD clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.

Calling clk_prepare() for FIMD clocks fixes the issue.

This patch also replaces clk_disable() with clk_unprepare() during exit, since
clk_prepare() is called in fimd_probe().
Signed-off-by: NVikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Oops.

This regression has been introduced in

commit 5d2d38dd
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 27 00:45:01 2013 +0100

    drm/i915: clean up pipe bpp confusion
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For a bunch of reason we need to more accurately track this:
- hw pipe state readout for Haswell needs the cpu transcoder.
- We need to know the right cpu transcoder in a bunch of places in
  ->disable and other modeset callbacks.

In the future we need to add hw state readout&check support, too. But
to avoid ugly merge conflicts do the rote sed job now without any
functional changes.

v2: Preserve the cpu_transcoder value when overwriting crtc->config.
Reported by Paulo.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
[danvet: Removed rough whitespace that Chris spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Bits 30 and 24:0 are PBC, so don't zero them. Some of the other bits
are being zeroed, but I couldn't find a reason for this, so leave them
as they are for now to avoid regressions.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
[danvet: Delete the redudant #define that Imre spotted in his review.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Check the VBT to see if the machine has inverted FDI RX polarity on
CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2
registers.

This should fix some machines that were showing black screens on all
outputs.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We disable hoptplug detection when we encounter a hotplug event
storm. Still hotplug detection is required on some outputs (like
Display Port). The interrupt storm may be only temporary (on certain
Dell Laptops for instance it happens at certain charging states of
the system). Thus we enable it after a certain grace period (2 minutes).
Should the interrupt storm persist it will be detected immediately
and it will be disabled again.

v2: Reordered drm_i915_private: moved hotplug_reenable_timer to hpd state tracker.
v3: Clarified loop start value,
    Removed superfluous test for Ivybridge and Haswell,
    Restructured loop to avoid deep nesting (all suggested by Ville Syrjälä)
v4: Fixed two bugs pointed out by Jani Nikula.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch disables hotplug interrupts if an 'interrupt storm'
has been detected.
Noise on the interrupt line renders the hotplug interrupt useless:
each hotplug event causes the devices to be rescanned which will
will only increase the system load.
Thus disable the hotplug interrupts and fall back to periodic
device polling.

v2: Fixed cleanup typo.
v3: Fixed format issues, clarified a variable name,
    changed pr_warn() to DRM_INFO() as suggested by
    Jani Nikula <jani.nikula@linux.intel.com>.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To disable previously enabled HPD IRQs we need to reset them and
set the enabled ones individually.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When an encoder is shared on several connectors there is only
one hotplug line, thus this line needs to be shared among these
connectors.
If HPD detect only works reliably on a subset of those connectors,
we want to poll the others. Thus we need to make sure that storm
detection doesn't mess up the settings for those connectors.
Therefore we store the settings in the intel_connector struct and
restore them from there.
If nothing is set but the encoder has a hpd_pin set we assume this
connector is hotplug capable.
On init/reset we make sure the polled state of the connectors
is (re)set to the default value, the HPD interrupts are marked
enabled.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a hotplug IRQ storm detection (triggered when a hotplug interrupt
fires more than 5 times / sec).
Rationale:
Despite of the many attempts to fix the problem with noisy hotplug
interrupt lines we are still seeing systems which have issues:
Once cause of noise seems to be bad routing of the hotplug line
on the board: cross talk from other signals seems to cause erronous
hotplug interrupts. This has been documented as an erratum for the
the i945GM chipset and thus hotplug support was disabled for this
chipset model but others seem to have this problem, too.

We have seen this issue on a G35 motherboard for example:
Even different motherboards of the same model seem to behave
differently: while some only see only around 10-100 interrupts/s
others seem to see 5k or more.
We've also observed a dependency on the selected video mode.

Also on certain laptops interrupt noise seems to occur duing
battery charging when the battery is at a certain charge levels.

Thus we add a simple algorithm here that detects an 'interrupt storm'
condition.

v2: Fixed comment.
v3: Reordered drm_i915_private: moved hpd state tracking to hotplug work stuff.
v4: Followed by Jesse Barnes to use a time_..() macro.
v5: Fixed coding style as suggested by Jani Nikula.
Signed-off-by: NEgbert Eich <eich@suse.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>