- 17 9月, 2019 20 次提交
-
-
由 Steve French 提交于
We only had dynamic tracepoints on errors in flush and close, but may be helpful to trace enter and non-error exits for those. Sample trace examples (excerpts) from "cp" and "dd" show two of the new tracepoints. cp-22823 [002] .... 123439.179701: smb3_enter: _cifsFileInfo_put: xid=10 cp-22823 [002] .... 123439.179705: smb3_close_enter: xid=10 sid=0x98871327 tid=0xfcd585ff fid=0xc7f84682 cp-22823 [002] .... 123439.179711: smb3_cmd_enter: sid=0x98871327 tid=0xfcd585ff cmd=6 mid=43 cp-22823 [002] .... 123439.180175: smb3_cmd_done: sid=0x98871327 tid=0xfcd585ff cmd=6 mid=43 cp-22823 [002] .... 123439.180179: smb3_close_done: xid=10 sid=0x98871327 tid=0xfcd585ff fid=0xc7f84682 dd-22981 [003] .... 123696.946011: smb3_flush_enter: xid=24 sid=0x98871327 tid=0xfcd585ff fid=0x1917736f dd-22981 [003] .... 123696.946013: smb3_cmd_enter: sid=0x98871327 tid=0xfcd585ff cmd=7 mid=123 dd-22981 [003] .... 123696.956639: smb3_cmd_done: sid=0x98871327 tid=0x0 cmd=7 mid=123 dd-22981 [003] .... 123696.956644: smb3_flush_done: xid=24 sid=0x98871327 tid=0xfcd585ff fid=0x1917736f Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
由 Steve French 提交于
If the server config (e.g. Samba smb.conf "csc policy = disable) for the share indicates that the share should not be cached, log a warning message if forced client side caching ("cache=ro" or "cache=singleclient") is requested on mount. Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
由 Steve French 提交于
If a share is known to be only to be accessed by one client, we can aggressively cache writes not just reads to it. Add "cache=" option (cache=singleclient) for mounting read write shares (that will not be read or written to from other clients while we have it mounted) in order to improve performance. Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Steve French 提交于
Add some additional logging so the user can see if the share they mounted with cache=ro is considered read only by the server CIFS: Attempting to mount //localhost/test CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use. CIFS VFS: read only mount of RW share CIFS: Attempting to mount //localhost/test-ro CIFS VFS: mounting share with read only caching. Ensure that the share will not be modified while in use. CIFS VFS: mounted to read only share Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
-
由 Steve French 提交于
If a share is immutable (at least for the period that it will be mounted) it would be helpful to not have to revalidate dentries repeatedly that we know can not be changed remotely. Add "cache=" option (cache=ro) for mounting read only shares in order to improve performance in cases in which we know that the share will not be changing while it is in use. Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Colin Ian King 提交于
The assignment of pointer server dereferences pointer ses, however, this dereference occurs before ses is null checked and hence we have a potential null pointer dereference. Fix this by only dereferencing ses after it has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: 2808c6639104 ("cifs: add new debugging macro cifs_server_dbg") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
which can be used from contexts where we have a TCP_Server_Info *server. This new macro will prepend the debugging string with "Server:<servername> " which will help when debugging issues on hosts with many cifs connections to several different servers. Convert a bunch of cifs_dbg(VFS) calls to cifs_server_dbg(VFS) Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
If we already have a writable handle for a path we want to set the attributes for then use that instead of a create/set-info/close compound. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
rename() takes a path for old_file and in SMB2 we used to just create a compound for create(old_path)/rename/close(). If we already have a writable handle we can avoid the create() and close() altogether and just use the existing handle. For this situation, as we avoid doing the create() we also avoid triggering an oplock break for the existing handle. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 YueHaibing 提交于
Fixes gcc '-Wunused-but-set-variable' warning: fs/cifs/file.c: In function cifs_lock: fs/cifs/file.c:1696:24: warning: variable cinode set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function cifs_write: fs/cifs/file.c:1765:23: warning: variable cifs_sb set but not used [-Wunused-but-set-variable] fs/cifs/file.c: In function collect_uncached_read_data: fs/cifs/file.c:3578:20: warning: variable tcon set but not used [-Wunused-but-set-variable] 'cinode' is never used since introduced by commit 03776f45 ("CIFS: Simplify byte range locking code") 'cifs_sb' is not used since commit cb7e9eab ("CIFS: Use multicredits for SMB 2.1/3 writes"). 'tcon' is not used since commit d26e2903 ("smb3: fix bytes_read statistics") Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Steve French 提交于
It is not null terminated (length was off by two). Also see similar change to Samba: https://gitlab.com/samba-team/samba/merge_requests/666Reported-by: NStefan Metzmacher <metze@samba.org> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 zhengbin 提交于
In smb3_punch_hole, variable cifsi set but not used, remove it. In cifs_lock, variable netfid set but not used, remove it. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: Nzhengbin <zhengbin13@huawei.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Colin Ian King 提交于
Variable rc is being initialized with a value that is never read and rc is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Steve French 提交于
SMB3 and 3.1.1 added two additional flags including the priority mask. Add them to our protocol definitions in smb2pdu.h. See MS-SMB2 2.2.1.2 Signed-off-by: NSteve French <stfrench@microsoft.com> Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Add support to send smb2 set-info commands from userspace. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com> Reviewed-by: NPaulo Alcantara <palcantara@suse.de>
-
由 Ronnie Sahlberg 提交于
Create smb2_flush_init() and smb2_flush_free() so we can use the flush command in compounds. Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Steve French 提交于
When mounting with "modefromsid" set mode bits (chmod) by adding ACE with special SID (S-1-5-88-3-<mode>) to the ACL. Subsequent patch will fix setting default mode on file create and mkdir. See See e.g. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Steve French 提交于
When mounting with "modefromsid" retrieve mode bits from special SID (S-1-5-88-3) on stat. Subsequent patch will fix setattr (chmod) to save mode bits in S-1-5-88-3-<mode> Note that when an ACE matching S-1-5-88-3 is not found, we default the mode to an approximation based on the owner, group and everyone permissions (as with the "cifsacl" mount option). See See e.g. https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/hh509017(v=ws.10)Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Colin Ian King 提交于
The variable ret is being initialized however this is never read and later it is being reassigned to a new value. The initialization is redundant and hence can be removed. Addresses-Coverity: ("Unused Value") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
由 Ronnie Sahlberg 提交于
Clarify a trivial comment Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com> Signed-off-by: NSteve French <stfrench@microsoft.com>
-
- 16 9月, 2019 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This reverts commit b03755ad. This is sad, and done for all the wrong reasons. Because that commit is good, and does exactly what it says: avoids a lot of small disk requests for the inode table read-ahead. However, it turns out that it causes an entirely unrelated problem: the getrandom() system call was introduced back in 2014 by commit c6e9d6f3 ("random: introduce getrandom(2) system call"), and people use it as a convenient source of good random numbers. But part of the current semantics for getrandom() is that it waits for the entropy pool to fill at least partially (unlike /dev/urandom). And at least ArchLinux apparently has a systemd that uses getrandom() at boot time, and the improvements in IO patterns means that existing installations suddenly start hanging, waiting for entropy that will never happen. It seems to be an unlucky combination of not _quite_ enough entropy, together with a particular systemd version and configuration. Lennart says that the systemd-random-seed process (which is what does this early access) is supposed to not block any other boot activity, but sadly that doesn't actually seem to be the case (possibly due bogus dependencies on cryptsetup for encrypted swapspace). The correct fix is to fix getrandom() to not block when it's not appropriate, but that fix is going to take a lot more discussion. Do we just make it act like /dev/urandom by default, and add a new flag for "wait for entropy"? Do we add a boot-time option? Or do we just limit the amount of time it will wait for entropy? So in the meantime, we do the revert to give us time to discuss the eventual fix for the fundamental problem, at which point we can re-apply the ext4 inode table access optimization. Reported-by: NAhmed S. Darwish <darwish.07@gmail.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Alexander E. Patrakov <patrakov@gmail.com> Cc: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 9月, 2019 7 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "The main change here is a revert of reverts. We recently simplified some code that was thought unnecessary; however, since then KVM has grown quite a few cond_resched()s and for that reason the simplified code is prone to livelocks---one CPUs tries to empty a list of guest page tables while the others keep adding to them. This adds back the generation-based zapping of guest page tables, which was not unnecessary after all. On top of this, there is a fix for a kernel memory leak and a couple of s390 fixlets as well" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslot KVM: x86: work around leak of uninitialized stack contents KVM: nVMX: handle page fault in vmread KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl KVM: s390: kvm_s390_vm_start_migration: check dirty_bitmap before using it as target for memset()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio fix from Michael Tsirkin: "A last minute revert The 32-bit build got broken by the latest defence in depth patch. Revert and we'll try again in the next cycle" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: Revert "vhost: block speculation of translated descriptors"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux由 Linus Torvalds 提交于
Pull RISC-V fix from Paul Walmsley: "Last week, Palmer and I learned that there was an error in the RISC-V kernel image header format that could make it less compatible with the ARM64 kernel image header format. I had missed this error during my original reviews of the patch. The kernel image header format is an interface that impacts bootloaders, QEMU, and other user tools. Those packages must be updated to align with whatever is merged in the kernel. We would like to avoid proliferating these image formats by keeping the RISC-V header as close as possible to the existing ARM64 header. Since the arch/riscv patch that adds support for the image header was merged with our v5.3-rc1 pull request as commit 0f327f2a ("RISC-V: Add an Image header that boot loader can parse."), we think it wise to try to fix this error before v5.3 is released. The fix itself should be backwards-compatible with any project that has already merged support for premature versions of this interface. It primarily involves ensuring that the RISC-V image header has something useful in the same field as the ARM64 image header" * tag 'riscv/for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: modify the Image header to improve compatibility with the ARM64 header
-
由 Michael S. Tsirkin 提交于
This reverts commit a89db445. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: - tmio: Fixup runtime PM management during probe and remove - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC - bcm2835: Prevent lockups when terminating work * tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fixup runtime PM management during remove mmc: tmio: Fixup runtime PM management during probe Revert "mmc: tmio: move runtime PM enablement to the driver implementations" Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" Revert "mmc: bcm2835: Terminate timeout work synchronously"
-
git://anongit.freedesktop.org/drm/drm由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "From the maintainer summit, just some last minute fixes for final: lima: - fix gem_wait ioctl core: - constify modes list i915: - DP MST high color depth regression - GPU hangs on vulkan compute workloads" * tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm: drm/lima: fix lima_gem_wait() return value drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+ drm/i915: Limit MST to <= 8bpc once again drm/modes: Make the whitelist more const
-
- 14 9月, 2019 10 次提交
-
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-s390-master-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fixes for 5.3 - prevent a user triggerable oops in the migration code - do not leak kernel stack content
-
由 Sean Christopherson 提交于
James Harvey reported a livelock that was introduced by commit d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06a) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aac ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d3 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b69 ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06a ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: NJames Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Fuqian Huang 提交于
Emulation of VMPTRST can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com> Cc: stable@vger.kernel.org [add comment] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The implementation of vmread to memory is still incomplete, as it lacks the ability to do vmread to I/O memory just like vmptrst. Cc: stable@vger.kernel.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paul Walmsley 提交于
Part of the intention during the definition of the RISC-V kernel image header was to lay the groundwork for a future merge with the ARM64 image header. One error during my original review was not noticing that the RISC-V header's "magic" field was at a different size and position than the ARM64's "magic" field. If the existing ARM64 Image header parsing code were to attempt to parse an existing RISC-V kernel image header format, it would see a magic number 0. This is undesirable, since it's our intention to align as closely as possible with the ARM64 header format. Another problem was that the original "res3" field was not being initialized correctly to zero. Address these issues by creating a 32-bit "magic2" field in the RISC-V header which matches the ARM64 "magic" field. RISC-V binaries will store "RSC\x05" in this field. The intention is that the use of the existing 64-bit "magic" field in the RISC-V header will be deprecated over time. Increment the minor version number of the file format to indicate this change, and update the documentation accordingly. Fix the assembler directives in head.S to ensure that reserved fields are properly zero-initialized. Signed-off-by: NPaul Walmsley <paul.walmsley@sifive.com> Reported-by: NPalmer Dabbelt <palmer@sifive.com> Reviewed-by: NPalmer Dabbelt <palmer@sifive.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Karsten Merker <merker@debian.org> Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
-
由 Bjørn Mork 提交于
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: NLars Melin <larsm17@gmail.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Mao Wenan says: ==================== fix memory leak for sctp_do_bind First two patches are to do cleanup, remove redundant assignment, and change return type of sctp_get_port_local. Third patch is to fix memory leak for sctp_do_bind if failed to bind address. v2: add one patch to change return type of sctp_get_port_local. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mao Wenan 提交于
There is one memory leak bug report: BUG: memory leak unreferenced object 0xffff8881dc4c5ec0 (size 40): comm "syz-executor.0", pid 5673, jiffies 4298198457 (age 27.578s) hex dump (first 32 bytes): 02 00 00 00 81 88 ff ff 00 00 00 00 00 00 00 00 ................ f8 63 3d c1 81 88 ff ff 00 00 00 00 00 00 00 00 .c=............. backtrace: [<0000000072006339>] sctp_get_port_local+0x2a1/0xa00 [sctp] [<00000000c7b379ec>] sctp_do_bind+0x176/0x2c0 [sctp] [<000000005be274a2>] sctp_bind+0x5a/0x80 [sctp] [<00000000b66b4044>] inet6_bind+0x59/0xd0 [ipv6] [<00000000c68c7f42>] __sys_bind+0x120/0x1f0 net/socket.c:1647 [<000000004513635b>] __do_sys_bind net/socket.c:1658 [inline] [<000000004513635b>] __se_sys_bind net/socket.c:1656 [inline] [<000000004513635b>] __x64_sys_bind+0x3e/0x50 net/socket.c:1656 [<0000000061f2501e>] do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 [<0000000003d1e05e>] entry_SYSCALL_64_after_hwframe+0x49/0xbe This is because in sctp_do_bind, if sctp_get_port_local is to create hash bucket successfully, and sctp_add_bind_addr failed to bind address, e.g return -ENOMEM, so memory leak found, it needs to destroy allocated bucket. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NMao Wenan <maowenan@huawei.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mao Wenan 提交于
There are more parentheses in if clause when call sctp_get_port_local in sctp_do_bind, and redundant assignment to 'ret'. This patch is to do cleanup. Signed-off-by: NMao Wenan <maowenan@huawei.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mao Wenan 提交于
Currently sctp_get_port_local() returns a long which is either 0,1 or a pointer casted to long. It's neither of the callers use the return value since commit 62208f12 ("net: sctp: simplify sctp_get_port"). Now two callers are sctp_get_port and sctp_do_bind, they actually assumend a casted to an int was the same as a pointer casted to a long, and they don't save the return value just check whether it is zero or non-zero, so it would better change return type from long to int for sctp_get_port_local. Signed-off-by: NMao Wenan <maowenan@huawei.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 9月, 2019 1 次提交
-
-
由 Jeff Kirsher 提交于
Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson <snelson@pensando.io> Fixes: 7f68d430 ("ixgbevf: enable VF IPsec offload operations") Reported-by: NJonathan Tooker <jonathan@reliablehosting.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: NShannon Nelson <snelson@pensando.io> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-