- 13 3月, 2009 14 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Once upon a time, the DRM made the distinction between the drm_map data structure exchanged with user space and the drm_local_map used in the kernel. For some reasons, while the BSD port still has that "feature", the linux part abused drm_map for kernel internal usage as the local map only existed as a typedef of the struct drm_map. This patch fixes it by declaring struct drm_local_map separately (though its content is currently identical to the userspace variant), and changing the kernel code to only use that, except when it's a user<->kernel interface (ie. ioctl). This allows subsequent changes to the in-kernel format I've also replaced the use of drm_local_map_t with struct drm_local_map in a couple of places. Mostly by accident but they are the same (the former is a typedef of the later) and I have some remote plans and half finished patch to completely kill the drm_local_map_t typedef so I left those bits in. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Benjamin Herrenschmidt 提交于
The DRM uses its own wrappers to obtain resources from PCI devices, which currently convert the resource_size_t into an unsigned long. This is broken on 32-bit platforms with >32-bit physical address space. This fixes them, along with a few occurences of unsigned long used to store such a resource in drivers. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Faisal Latif 提交于
STag zero is a special STag that allows consumers to access any bus address without registering memory. The nes driver unfortunately allows STag zero to be used even with QPs created by unprivileged userspace consumers, which means that any process with direct verbs access to the nes device can read and write any memory accessible to the underlying PCI device (usually any memory in the system). Such access is usually given for cluster software such as MPI to use, so this is a local privilege escalation bug on most systems running this driver. The driver was using STag zero to receive the last streaming mode data; to allow STag zero to be disabled for unprivileged QPs, the driver now registers a special MR for this data. Cc: <stable@kernel.org> Signed-off-by: NFaisal Latif <faisal.latif@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Brown 提交于
No software visible difference from revision A. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Spang 提交于
Currently we disable the Acer WMI backlight device if there is no ACPI backlight device. As a result, we end up with no backlight device at all. We should instead disable it if there is an ACPI device, as the other laptop drivers do. This regression was introduced in febf2d95 ("Acer-WMI: fingers off backlight if video.ko is serving this functionality"). Each laptop driver with backlight support got a similar change around febf2d95. The changes to the other drivers look correct; see e.g. a598c82f for a similar but correct change. The regression is also in 2.6.28. Signed-off-by: NMichael Spang <mspang@csclub.uwaterloo.ca> Acked-by: NThomas Renninger <trenn@suse.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Len Brown <len.brown@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Acked-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Mack 提交于
The 'battery remaining capacity' calculation in drivers/power/ds2760_battery.c lacks a parameter check to a division operation which causes the kernel to oops on my board. [ 21.233750] Division by zero in kernel. [ 21.237646] [<c002955c>] (__div0+0x0/0x20) from [<c012561c>] (Ldiv0+0x8/0x10) [ 21.244816] [<c01bef34>] (ds2760_battery_read_status+0x0/0x2a4) from [<c01bf3a4>] (ds2760_battery_get_property+0x30/0xdc) [ 21.255803] r8:c03a22c0 r7:c7886100 r6:00000009 r5:c782fe7c r4:c7886084 [ 21.262518] [<c01bf374>] (ds2760_battery_get_property+0x0/0xdc) from [<c01bde98>] (power_supply_show_property+0x48/0x114) [ 21.273480] r6:c7996000 r5:00000009 r4:00000000 [ 21.278111] [<c01bde50>] (power_supply_show_property+0x0/0x114) from [<c01be158>] (power_supply_uevent+0x188/0x280) [ 21.288537] r8:00000001 r7:c7886100 r6:c7996000 r5:000000b4 r4:00000000 [ 21.295222] [<c01bdfd0>] (power_supply_uevent+0x0/0x280) from [<c015c664>] (dev_uevent+0xd4/0x10c) [ 21.304199] [<c015c590>] (dev_uevent+0x0/0x10c) from [<c0128440>] (kobject_uevent_env+0x180/0x390) [ 21.313170] r5:00000000 r4:c78860ac [ 21.316725] [<c01282c0>] (kobject_uevent_env+0x0/0x390) from [<c0128664>] (kobject_uevent+0x14/0x18) [ 21.325850] [<c0128650>] (kobject_uevent+0x0/0x18) from [<c01bdc34>] (power_supply_changed_work+0x5c/0x70) [ 21.335506] [<c01bdbd8>] (power_supply_changed_work+0x0/0x70) from [<c004d290>] (run_workqueue+0xbc/0x144) [ 21.345167] r4:c7812040 [ 21.347716] [<c004d1d4>] (run_workqueue+0x0/0x144) from [<c004d94c>] (worker_thread+0xa8/0xbc) [ 21.356296] r7:c7812040 r6:c7820b00 r5:c782ffa4 r4:c7812048 [ 21.361957] [<c004d8a4>] (worker_thread+0x0/0xbc) from [<c0051008>] (kthread+0x5c/0x94) [ 21.369971] r7:00000000 r6:c004d8a4 r5:c7812040 r4:c782e000 [ 21.375612] [<c0050fac>] (kthread+0x0/0x94) from [<c00403d0>] (do_exit+0x0/0x688) Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Acked-by: NMatt Reimer <mreimer@vpop.net> Acked-by: NAnton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Mack 提交于
W1 master implementations are expected to return 0 or 1 from their read_bit() function. However, not all platforms do return these values from gpio_get_value() - namely PXAs won't. Hence the w1 gpio-master needs to break the result down to 0 or 1 itself. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alex Chiang 提交于
The PCIe port driver calls pci_enable_device() during probe but never calls pci_disable_device() during remove. Cc: stable@kernel.org Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Prakash Punnoor 提交于
"Enabling" should read "Disabling" Signed-off-by: NPrakash Punnoor <prakash@punnoor.de> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Prakash Punnoor 提交于
Prakash's system needs MSI disabled on some bridges, but not all. This seems to be the minimal fix for 2.6.29, but should be replaced during 2.6.30. Signed-off-by: NPrakash Punnoor <prakash@punnoor.de> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Michael Ellerman 提交于
The RPA PCI hotplug driver calls EEH routines, so should depend on EEH. Also PPC_PSERIES implies PPC64, so remove that. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Alex Chiang 提交于
Commit 47a8b0cc (Enable PCIe AER only after checking firmware support) wants to walk the PCI bus in the remove path to disable AER, and calls pci_walk_bus for downstream bridges. Unfortunately, in the remove path, we remove devices and bridges in a depth-first manner, starting with the furthest downstream bridge and working our way backwards. The furthest downstream bridges will not have a dev->subordinate, and we hit a NULL deref in pci_walk_bus. Check for dev->subordinate first before attempting to walk the PCI hierarchy below us. Acked-by: NAndrew Patterson <andrew.patterson@hp.com> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Alexander Duyck 提交于
This patch is intended to disable L0s ASPM link state for 82598 (ixgbe) parts due to the fact that it is possible to corrupt TX data when coming back out of L0s on some systems. The workaround had been added for 82575 (igb) previously, but did not use the ASPM api. This quirk uses the ASPM api to prevent the ASPM subsystem from re-enabling the L0s state. Instead of adding the fix in igb to the ixgbe driver as well it was decided to move it into a pci quirk. It is necessary to move the fix out of the driver and into a pci quirk in order to prevent the issue from occuring prior to driver load to handle the possibility of the device being passed to a VM via direct assignment. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
- 12 3月, 2009 6 次提交
-
-
由 Andrew Klossner 提交于
f75375_probe calls i2c_get_clientdata to initialize the data pointer, but there isn't yet any client data to get, and the value is never used before the variable is assigned a new value seven lines later. The call doesn't hurt anything and wastes only a couple of cycles. The reason to fix it is because this module serves as an example to hackers writing new hwmon drivers, and this part of the example is confusing. Signed-off-by: NAndrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Darrick J. Wong 提交于
Update documentation to prevent further confusion/duplication. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Fix a logic bug reported by Roel Kluin, by rewriting the error handling code in a clearer way. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: NAlistair John Strachan <alistair@devzero.co.uk> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
由 Eric Anholt 提交于
The last 8 fence registers sit at a different offset, so when we went to set fence number 8 in the lower offset, we instead set PGETBL_CTL, and the GPU got all sorts of angry at us. fd.o bug #20567. Easily reproducible by running glxgears and killing it about 6 times. Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
The i915 also uses the fence registers for GPU access to tiled buffers so we cannot reallocate one whilst it is on the active list. By performing a LRU scan of the fenced buffers we also avoid waiting the possibility of waiting on a pinned, or otherwise unusable, buffer. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 11 3月, 2009 17 次提交
-
-
由 Chris Wilson 提交于
We need to check and report if there are no available fences - or else we spin endlessly waiting for a buffer to magically unpin itself. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
As we may steal the fence register of an unpinned buffer for another, every time we repin the buffer we need to recheck whether it needs to be allocated a fence. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
If we wait upon a request and successfully unbind a buffer occupying a fence register, then that slot will be freed and cause a NULL derefrence upon rescanning. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Benjamin Herrenschmidt 提交于
radeonfb and aty128fb have a special hook called by the PowerMac platform code very very early on resume from sleep to bring the screen back. This is useful for debugging wakup problems, but unfortunately, this also became a source of problems of its own. The hook is called extremely early, with interrupts still off, and the code path involved with that code nowadays rely on things like taking mutexes, GFP_KERNEL allocations, etc... In addition, the driver now relies on the PCI core to restore the standard config space before calling resume which doesn't happen with this early code path. I'm keeping the code in but commented out along with a fixup call to pci_restore_state(). The reason is that I still want to make it easy to re-enable temporarily to track wake up problems, and it's possible that I can revive it at some stage if we make sleeping things save to call in early resume using a system state. In the meantime, this should fix several reported regressions. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The hvcs and hvsi backends both set tty->low_latency to one, along with more or less scary comments regarding bugs or races that would happen if not doing so. However, they also both call tty_flip_buffer_push() in conexts where it's illegal to do so since some recent tty changes (or at least it may have been illegal always but it nows blows) when low_latency is set (ie, hard interrupt or with spinlock held and irqs disabled). This removes the setting for now to get them back to working condition, we'll have to address the races described in the comments separately if they are still an issue (some of this might have been fixed already). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Samuel CUELLA 提交于
Prevent the kernel from being crashed by a divide-by-zero operation when supplied an incorrectly filled 'struct fb_var_screeninfo' from userland. Previously i810_main.c:1005 (i810_check_params) was using the global 'yres' symbol previously defined at i810_main.c:145 as a module parameter value holder (i810_main.c:2174). If i810fb is compiled-in or if this param doesn't get a default value, this direct usage leads to a divide-by-zero at i810_main.c:1005 (i810_check_params). The patch simply replace the 'yres' global, perhaps undefined symbol usage by a given parameter structure lookup. This problem occurs with directfb, mplayer -vo fbdev, SDL library. It was also reported ( but non solved ) at: http://mail.directfb.org/pipermail/directfb-dev/2008-March/004050.htmlSigned-off-by: NSamuel CUELLA <samuel.cuella@supinfo.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
commit e480814f ("[MTD] [MAPS] physmap: fix wrong free and del_mtd_{partition,device}") introduces a NULL pointer dereference in physmap_flash_remove when called from the error path in physmap_flash_probe (if map_probe failed). Call del_mtd_{partition,device} only if info->cmtd was not NULL. Reported-by: NpHilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lubomir Rintel 提交于
When GTT size is equal to amount of video memory, the amount of GTT entries is computed lower than zero, which is invalid and leads to off-by-one error in intel_i915_configure() Originally posted here: http://bugzilla.kernel.org/show_bug.cgi?id=12539 http://bugzilla.redhat.com/show_bug.cgi?id=445592Signed-off-by: NLubomir Rintel <lkundrak@v3.sk> Cc: Lubomir Rintel <lkundrak@v3.sk> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: NEric Anholt <eric@anholt.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Will Newton 提交于
Commit 771999b6 ("[MTD] DataFlash: bugfix, binary page sizes now handled") broke support for probing AT45DB321C flash chips. These chips do not support the "page size" status bit, so if we match the JEDEC id return early. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NWill Newton <will.newton@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
Impact: fix bug to make agp work with dri Jeffrey reported that dri does work with 64bit, but doesn't work with 32bit it turns out NB aperture is 32M, aperture on agp is 128M 64bit is using 64M for vaidation for 64 iommu/gart 32bit is only using 32M..., and will not update the nb aperture. So try to compare nb apterture and agp apterture before leaving not touch nb aperture. Reported-by: NJeffrey Trull <jetrull@sbcglobal.net> Tested-by: NJeffrey Trull <jetrull@sbcglobal.net> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NDave Airlie <airlied@linux.ie> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
The adt7468 chip supports VRM10 sensors just like the adt7463; add a missing check for it. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Darrick J. Wong 提交于
The verstep check in the lm85 driver fails because the upper nibble of the version register is 0x7, not 0x6, on the adt7468 chip. Probing of all adt7468s was broken by 69fc1feb ("hwmon: (lm85) Rework the device detection"), and this patch fixes that. Also add in a missing i2c_device_id that accidentally got dropped from the original patch. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roel Kluin 提交于
get_nid_for_pfn() returns int Presumably the (nid < 0) case has never happened. We do know that it is happening on one system while creating a symlink for a memory section so it should also happen on the same system if unregister_mem_sect_under_nodes() were called to remove the same symlink. The test was actually added in response to a problem with an earlier version reported by Yasunori Goto where one or more of the leading pages of a memory section on the 2nd node of one of his systems was uninitialized because I believe they coincided with a memory hole. That earlier version did not ignore uninitialized pages and determined the nid by considering only the 1st page of each memory section. This caused the symlink to the 1st memory section on the 2nd node to be incorrectly created in /sys/devices/system/node/node0 instead of /sys/devices/system/node/node1. The problem was fixed by adding the test to skip over uninitialized pages. I suspect we have not seen any reports of the non-removal of a symlink due to the incorrect declaration of the nid variable in unregister_mem_sect_under_nodes() because - systems where a memory section could have an uninitialized range of leading pages are probably rare. - memory remove is probably not done very frequently on the systems that are capable of demonstrating the problem. - lingering symlink(s) that should have been removed may have simply gone unnoticed. [garyhade@us.ibm.com: wrote changelog] Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Gary Hade <garyhade@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Anholt 提交于
Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Pierre Willenbrock 提交于
The VGA registers just hit the pipe registers that we already set through MMIO. This fixes strange colors on resume. Signed-off-by: NPierre Willenbrock <pierre@pirsoft.de> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Kyle McMartin 提交于
Prevents formatting nasty as below: [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 Signed-off-by: NKyle McMartin <kyle@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Kristian Høgsberg 提交于
If userspace passes an object list with the same object appearing more than once, we end up hitting the BUG_ON() in i915_gem_object_set_to_gpu_domain() as it gets called a second time for the same object. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 10 3月, 2009 2 次提交
-
-
由 Magnus Damm 提交于
Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Dave Jones 提交于
This reverts commit e088e4c9. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 09 3月, 2009 1 次提交
-
-
由 Friedrich Oslage 提交于
Signed-off-by: NFriedrich Oslage <bluebird@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-