- 03 10月, 2007 13 次提交
-
-
由 Maciej W. Rozycki 提交于
Restore a load from KSEG1 done as a workaround for an R4600 v2 erratum, dropped with 211be16de99a7424e66c0b6c0d00e2c970508ac2. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'sas-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: aic94xx: fix DMA data direction for SMP requests
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: dm9601: Fix receive MTU mv643xx_eth: Do not modify struct netdev tx_queue_len qla3xxx: bugfix: Fix VLAN rx completion handling. qla3xxx: bugfix: Add memory barrier before accessing rx completion.
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: add another TECRA M3 entry to broken suspend list
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy. [SPARC64]: Fix put_user() calls in binfmt_aout32.c [SPARC]: Fix EBUS use of uninitialized variable.
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IEEE80211]: avoid integer underflow for runt rx frames [TCP]: secure_tcp_sequence_number() should not use a too fast clock [SFQ]: Remove artificial limitation for queue limit.
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix xics set_affinity code
-
由 Jeff Garzik 提交于
DMA-mapped SMP (scsi management protocol) requests going /to/ the device need the PCI DMA data direction to indicate such. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Peter Korsgaard 提交于
dm9601 didn't take the ethernet header into account when calculating RX MTU, causing packets bigger than 1486 to fail. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Dale Farnsworth 提交于
This driver erroneously zeros dev->tx_queue_len, since mp->tx_ring_size has not yet been initialized. Actually, the driver shouldn't modify tx_queue_len at all and should leave the value set by alloc_etherdev(), currently 1000. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ron Mercer 提交于
Fix 4032 chip undocumented "feature" where bit-8 is set if the inbound completion is for a VLAN. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 02 10月, 2007 13 次提交
-
-
由 Tejun Heo 提交于
There's a different version of DMI table for TECRA M3 where it has proper vendor and product name entry. Add the entry to the broken suspend list. Angus Turnbull reported and provided initial patch. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Angus Turnbull <angus@twinhelix.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ingo Molnar 提交于
fix sleep profiling - we lost this chunk in the CFS merge. Found-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David S. Miller 提交于
For the case where the source is not aligned modulo 8 we don't use load-twins to suck the data in and this kills performance since normal loads allocate in the L1 cache (unlike load-twin) and thus big memcpys swipe the entire L1 D-cache. We need to allocate a register window to implement this properly, but that actually simplifies a lot of things as a nice side-effect. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Reported by Chris Evans <scarybeasts@gmail.com>: > The summary is that an evil 80211 frame can crash out a victim's > machine. It only applies to drivers using the 80211 wireless code, and > only then to certain drivers (and even then depends on a card's > firmware not dropping a dubious packet). I must confess I'm not > keeping track of Linux wireless support, and the different protocol > stacks etc. > > Details are as follows: > > ieee80211_rx() does not explicitly check that "skb->len >= hdrlen". > There are other skb->len checks, but not enough to prevent a subtle > off-by-two error if the frame has the IEEE80211_STYPE_QOS_DATA flag > set. > > This leads to integer underflow and crash here: > > if (frag != 0) > flen -= hdrlen; > > (flen is subsequently used as a memcpy length parameter). How about this? Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP V4 sequence numbers are 32bits, and RFC 793 assumed a 250 KHz clock. In order to follow network speed increase, we can use a faster clock, but we should limit this clock so that the delay between two rollovers is greater than MSL (TCP Maximum Segment Lifetime : 2 minutes) Choosing a 64 nsec clock should be OK, since the rollovers occur every 274 seconds. Problem spotted by Denys Fedoryshchenko [ This bug was introduced by f8595815 ] Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kuznetsov 提交于
This is followup to Patrick's patch. A little optimization to enqueue routine allows to remove artificial limitation on queue length. Plus, testing showed that hash function used by SFQ is too bad or even worse. It does not even sweep the whole range of hash values. Switched to Jenkins' hash. Signed-off-by: NAlexey Kuznetsov <kaber@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
No, I didn't want to do this, but we had more stuff go in after -rc8 than we had in the previous -rc. Gaah.
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] vmlinux.lds.S: Handle note sections [MIPS] Fix value of O_TRUNC
-
由 Andi Kleen 提交于
For some reason old binutils genertate larger headers so increase the text offset of the vdso to avoid linker errors. Roland McGrath explains: "There are extra symbols in the '.dynsym' section that are responsible for the size difference (They also cause corresponding inflation in '.gnu.version') Older ld's wrongly generated these unneeded symbols in .dynsym. This was fixed not all that long ago (2006); binutils-2.17.50.0.6 might be the first fixed version, but I have not verified for sure where the cutoff was. The unneeded symbols et al from old ld add almost 700 bytes excess. This limits fairly tightly the amount by which the actual text and data in the vDSO can grow in the future without pushing the whole file over 4kb. If it does grow later on, we should consider changing the layout with a config option or something to pack it better without that padding, when building the kernel with newer binutils." Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Roland McGrath <roland@redhat.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Blanchard 提交于
On a POWER6 machine running 2.6.23-rc8 I sometimes see the following error: xics_set_affinity: No online cpus in the mask 00000000,00000000,00000000,00000001 for irq 20 In a desperate attempt to get a changelog entry in 2.6.23, I took a look into it. It turns out we are passing a real and not a virtual irq into get_irq_server. This works for the case where hwirq < NR_IRQS and we set virq = hwirq. In my case however hwirq = 590082 and we try and access irq_desc[590082], slightly past the end at 512 entries. Lucky we ship lots of memory with our machines. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
Nick Piggin points out that splice isn't being good about the mmap semaphore: while two readers can nest inside each others, it does leave a possible deadlock if a writer (ie a new mmap()) comes in during that nesting. Original "just move the locking" patch by Nick, replaced by one by me based on an optimistic pagefault_disable(). And then Jens tested and updated that patch. Reported-by: NNick Piggin <npiggin@suse.de> Tested-by: NJens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6由 Linus Torvalds 提交于
* 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: [PATCH] libertas: build problems when partially modular
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Resolve PCI section warnings
-
- 01 10月, 2007 13 次提交
-
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6052): ivtv: fix udma yuv bug
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: Revert "[XFS] Avoid replaying inode buffer initialisation log items if .. [ Fixed it and added some commit messages by hand to that branch - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tim Shimmin 提交于
This reverts commit b394e43e. Lachlan McIlroy says: It tried to fix an issue where log replay is replaying an inode cluster initialisation transaction that should not be replayed because the inode cluster on disk is more up to date. Since we don't log file sizes (we rely on inode flushing to get them to disk) then we can't just replay all the transations in the log and expect the inode to be completely restored. We lose file size updates. Unfortunately this fix is causing more (serious) problems than it is fixing. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29804a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Martin Schwidefsky 提交于
Calling handle_futex_death in exit_robust_list for the different robust mutexes of a thread basically frees the mutex. Another thread might grab the lock immediately which updates the next pointer of the mutex. fetch_robust_entry over the next pointer might therefore branch into the robust mutex list of a different thread. This can cause two problems: 1) some mutexes held by the dead thread are not getting freed and 2) some mutexs held by a different thread are freed. The next point need to be read before calling handle_futex_death. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samuel Ortiz 提交于
When calling the RELDISP VT ioctl, we are reading vt_newvt while the console workqueue could be messing with it (through change_console()). We fix this race by taking the console semaphore before reading vt_newvt. Signed-off-by: NSamuel Ortiz <sameo@openedhand.com> Acked-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Lord 提交于
We need to disable all CPUs other than the boot CPU (usually 0) before attempting to power-off modern SMP machines. This fixes the hang-on-poweroff issue on my MythTV SMP box, and also on Thomas Gleixner's new toybox. Signed-off-by: NMark Lord <mlord@pobox.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
The virtual address space argument of clear_user_highpage is supposed to be the virtual address where the page being cleared will eventually be mapped. This allows architectures with virtually indexed caches a few clever tricks. That sort of trick falls over in painful ways if the virtual address argument is wrong. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <device@lanana.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Maciej W. Rozycki 提交于
Store any note sections after the exception tables like the other architectures do. This is required for .note.gnu.build-id emitted from binutils 2.18 onwards if nothing else. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
A "cleanup" almost two years ago deleted the old definition from <asm/fcntl.h>, so asm-generic/fcntl.h defaulted it to the the same value as FASYNC ... which happened to be the wrong thing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Randy Dunlap 提交于
Fix missing symbols in libertas USB driver when it is modular and rest of libertas is built-in. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David S. Miller 提交于
argv and envp are pointers to u32's in userspace, so don't try to put_user() a NULL to them. Aparently gcc-4.2.x now warns about this, and since we use -Werror for arch/sparc64 code, this breaks the build. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 9月, 2007 1 次提交
-
-
由 Ian Armstrong 提交于
Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-