- 24 3月, 2020 18 次提交
-
-
由 Nikolay Borisov 提交于
Having btrfs_destroy_delayed_refs call btrfs_pin_extent is problematic for making pinned extents tracking per-transaction since btrfs_trans_handle cannot be passed to btrfs_pin_extent in this context. Additionally delayed refs heads pinned in btrfs_destroy_delayed_refs are going to be handled very closely, in btrfs_destroy_pinned_extent. To enable btrfs_pin_extent to take btrfs_trans_handle simply open code it in btrfs_destroy_delayed_refs and call btrfs_error_unpin_extent_range on the range. This enables us to do less work in btrfs_destroy_pinned_extent and leaves btrfs_pin_extent being called in contexts which have a valid btrfs_trans_handle. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The tree pointer can be safely read from the page's inode, use it and drop the redundant argument. Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We are now using these for all roots, rename them to btrfs_put_root() and btrfs_grab_root(); Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Now that we're going to start relying on getting ref counting right for roots, add a list to track allocated roots and print out any roots that aren't freed up at free_fs_info time. Hide this behind CONFIG_BTRFS_DEBUG because this will just be used for developers to verify they aren't breaking things. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
In adding things like eb leak checking and root leak checking there were a lot of weird corner cases that come from the fact that 1) We do not init the fs_info until we get to open_ctree time in the normal case and 2) The test infrastructure half-init's the fs_info for things that it needs. This makes it really annoying to make changes because you have to add init in two different places, have special cases for testing fs_info's that may not have certain things initialized, and cases for fs_info's that didn't make it to open_ctree and thus are not fully set up. Fix this by extracting out the non-allocating init of the fs info into it's own public function and use that to make sure we're all getting consistent views of an allocated fs_info. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
open_ctree mixes initialization of fs stuff and fs_info stuff, which makes it confusing when doing things like adding the root leak detection. Make a separate function that inits all the static structures inside of the fs_info needed for the fs to operate, and then call that before we start setting up the fs_info to be mounted. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Things like the percpu_counters, the mapping_tree, and the csum hash can all be freed at btrfs_free_fs_info time, since the helpers all check if the structure has been initialized already. This significantly cleans up the error cases in open_ctree. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Now that all callers of btrfs_get_fs_root are subsequently calling btrfs_grab_fs_root and handling dropping the ref when they are done appropriately, go ahead and push btrfs_grab_fs_root up into btrfs_get_fs_root. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
If we are going to track leaked roots we need to free them all the same way, so don't kfree() roots directly, use btrfs_put_fs_root. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We lookup the fs_root and put it in our fs_info directly, we should hold a ref on this root for the lifetime of the fs_info. Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We're going to start freeing roots and doing other complicated things in free_fs_info, so we need to move it to disk-io.c and export it in order to use things lik btrfs_put_fs_root(). Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
If the root is sitting in the radix tree, we should probably have a ref for the radix tree. Grab a ref on the root when we insert it, and drop it when it gets deleted. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Now that the orphan cleanup stuff doesn't use this directly we can just make them static. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
All this does is call btrfs_get_fs_root() with check_ref == true. Just use btrfs_get_fs_root() so we don't have a bunch of different helpers that do the same thing. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
All helpers should either be using btrfs_get_fs_root() or btrfs_read_tree_root(). Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
Tree-log uses btrfs_read_fs_root to load its log, but this just calls btrfs_read_tree_root. We don't save the log roots in our root cache, so just export this helper and use it in the logging code. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We have a helper for reading fs roots that just reads the fs root off the disk and then sets REF_COWS and init's the inheritable flags. Move this into btrfs_init_fs_root so we can later get rid of this helper and consolidate all of the fs root reading into one helper. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
There's no reason to not init the root at alloc time, and with later patches it actually causes problems if we error out mounting the fs before the tree_root is init'ed because we expect it to have a valid ref count. Fix this by pushing __setup_root into btrfs_alloc_root. Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 19 2月, 2020 3 次提交
-
-
由 Josef Bacik 提交于
btrfs_assert_delayed_root_empty() will check if the delayed root is completely empty, but this is a filesystem-wide check. On cleanup we may have allowed other transactions to begin, for whatever reason, and thus the delayed root is not empty. So remove this check from cleanup_one_transation(). This however can stay in btrfs_cleanup_transaction(), because it checks only after all of the transactions have been properly cleaned up, and thus is valid. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
While running my error injection script I hit a panic when we tried to clean up the fs_root when freeing the fs_root. This is because fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by setting fs_info->fs_root = NULL; if we fail to read the root. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
We clean up the delayed references when we abort a transaction but we leave the pending qgroup extent records behind, leaking memory. This patch destroys the extent records when we destroy the delayed refs and makes sure ensure they're gone before releasing the transaction. Fixes: 3368d001 ("btrfs: qgroup: Record possible quota-related extent for qgroup.") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NJeff Mahoney <jeffm@suse.com> [ Rebased to latest upstream, remove to_qgroup() helper, use rbtree_postorder_for_each_entry_safe() wrapper ] Signed-off-by: NQu Wenruo <wqu@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 13 2月, 2020 1 次提交
-
-
由 David Sterba 提交于
There's no logged information about tree-log replay although this is something that points to previous unclean unmount. Other filesystems report that as well. Suggested-by: NChris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 31 1月, 2020 1 次提交
-
-
由 Filipe Manana 提交于
There is a race between adding and removing elements to the tree mod log list and rbtree that can lead to use-after-free problems. Consider the following example that explains how/why the problems happens: 1) Task A has mod log element with sequence number 200. It currently is the only element in the mod log list; 2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to access the tree mod log. When it enters the function, it initializes 'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock' before checking if there are other elements in the mod seq list. Since the list it empty, 'min_seq' remains set to (u64)-1. Then it unlocks the lock 'tree_mod_seq_lock'; 3) Before task A acquires the lock 'tree_mod_log_lock', task B adds itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a sequence number of 201; 4) Some other task, name it task C, modifies a btree and because there elements in the mod seq list, it adds a tree mod elem to the tree mod log rbtree. That node added to the mod log rbtree is assigned a sequence number of 202; 5) Task B, which is doing fiemap and resolving indirect back references, calls btrfs get_old_root(), with 'time_seq' == 201, which in turn calls tree_mod_log_search() - the search returns the mod log node from the rbtree with sequence number 202, created by task C; 6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating the mod log rbtree and finds the node with sequence number 202. Since 202 is less than the previously computed 'min_seq', (u64)-1, it removes the node and frees it; 7) Task B still has a pointer to the node with sequence number 202, and it dereferences the pointer itself and through the call to __tree_mod_log_rewind(), resulting in a use-after-free problem. This issue can be triggered sporadically with the test case generic/561 from fstests, and it happens more frequently with a higher number of duperemove processes. When it happens to me, it either freezes the VM or it produces a trace like the following before crashing: [ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1 [ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 1245.321287] RIP: 0010:rb_next+0x16/0x50 [ 1245.321307] Code: .... [ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202 [ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b [ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80 [ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000 [ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038 [ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8 [ 1245.321539] FS: 00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000 [ 1245.321591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0 [ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1245.321706] Call Trace: [ 1245.321798] __tree_mod_log_rewind+0xbf/0x280 [btrfs] [ 1245.321841] btrfs_search_old_slot+0x105/0xd00 [btrfs] [ 1245.321877] resolve_indirect_refs+0x1eb/0xc60 [btrfs] [ 1245.321912] find_parent_nodes+0x3dc/0x11b0 [btrfs] [ 1245.321947] btrfs_check_shared+0x115/0x1c0 [btrfs] [ 1245.321980] ? extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322029] extent_fiemap+0x59d/0x6d0 [btrfs] [ 1245.322066] do_vfs_ioctl+0x45a/0x750 [ 1245.322081] ksys_ioctl+0x70/0x80 [ 1245.322092] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1245.322113] __x64_sys_ioctl+0x16/0x20 [ 1245.322126] do_syscall_64+0x5c/0x280 [ 1245.322139] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1245.322155] RIP: 0033:0x7fdee3942dd7 [ 1245.322177] Code: .... [ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7 [ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004 [ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44 [ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48 [ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50 [ 1245.322423] Modules linked in: .... [ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]--- Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum sequence number and iterates the rbtree while holding the lock 'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock' lock, since it is now redundant. Fixes: bd989ba3 ("Btrfs: add tree modification log functions") Fixes: 097b8a7c ("Btrfs: join tree mod log code with the code holding back delayed refs") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 24 1月, 2020 1 次提交
-
-
由 Josef Bacik 提交于
Sometimes when running generic/475 we would trip the WARN_ON(cache->reserved) check when free'ing the block groups on umount. This is because sometimes we don't commit the transaction because of IO errors and thus do not cleanup the tree logs until at umount time. These blocks are still reserved until they are cleaned up, but they aren't cleaned up until _after_ we do the free block groups work. Fix this by moving the free after free'ing the fs roots, that way all of the tree logs are cleaned up and we have a properly cleaned fs. A bunch of loops of generic/475 confirmed this fixes the problem. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: NJosef Bacik <josef@toxicpanda.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 20 1月, 2020 5 次提交
-
-
由 Dennis Zhou 提交于
When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: NJosef Bacik <josef@toxicpanda.com> Signed-off-by: NDennis Zhou <dennis@kernel.org> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Omar Sandoval 提交于
We only pass this as 1 from __extent_writepage_io(). The parameter basically means "pretend I didn't pass in a page". This is silly since we can simply not pass in the page. Get rid of the parameter from btrfs_get_extent(), and since it's used as a get_extent_t callback, remove it from get_extent_t and btree_get_extent(), neither of which need it. While we're here, let's document btrfs_get_extent(). Signed-off-by: NOmar Sandoval <osandov@fb.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Merge btrfs_sysfs_add_fsid() and btrfs_sysfs_add_devices_kobj() functions as these two are small and they are called one after the other. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
btrfs_sysfs_add_device() creates the directory /sys/fs/btrfs/UUID/devices but its function name is misleading. Rename it to btrfs_sysfs_add_devices_kobj() instead. No functional changes. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Anand Jain 提交于
Commit 24bd69cb ("Btrfs: sysfs: add support to add parent for fsid") added parent argument in preparation to show the seed fsid under the sprout fsid as in the patch [1] in the mailing list. [1] Btrfs: sysfs: support seed devices in the sysfs layout But later this idea was superseded by another idea to rename the fsid as in the commit f93c3997 ("btrfs: factor out sysfs code for updating sprout fsid"). So we don't need parent argument anymore. Signed-off-by: NAnand Jain <anand.jain@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 19 11月, 2019 11 次提交
-
-
由 David Sterba 提交于
We can now remove the bdev from extent_map. Previous patches made sure that bio_set_dev is correctly in all places and that we don't need to grab it from latest_bdev or pass it around inside the extent map. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
The type name is misleading, a single entry is named 'cache' while this normally means a collection of objects. Rename that everywhere. Also the identifier was quite long, making function prototypes harder to format. Suggested-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NQu Wenruo <wqu@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
The backup_root_index member stores the index at which the backup root should be saved upon next transaction commit. However, there is a small deviation from this behavior in the form of a check in backup_super_roots which checks if current root generation equals to the generation of the previous root. This can trigger in the following scenario: slot0: gen-2 slot1: gen-1 slot2: gen slot3: unused Now suppose slot3 (which is also the root specified in the super block) is corrupted hence init_tree_roots chooses to use the backup root at slot2, meaning read_backup_root will read slot2 and assign the superblock generation to gen-1. Despite this backup_root_index will point at slot3 because its init happens in init_backup_root_slot, long before any parsing of the backup roots occur. Then on next transaction start, gen-1 will be incremented by 1 making the root's generation equal gen. Subsequently, on transaction commit the following check triggers: if (btrfs_backup_tree_root_gen(root_backup) == btrfs_header_generation(info->tree_root->node)) This causes the 'next_backup', which is the index at which the backup is going to be written to, to set to last_backup, which will be slot2. All of this is a very confusing way of expressing the following invariant: Always write a backup root at the index following the last used backup root. This commit streamlines this logic by setting backup_root_index to the next index after the one used for mount. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
The old name name was an awful misnomer because it didn't really find the oldest super backup per-se but rather its slot. For example if we have: slot0: gen - 2 slot1: gen - 1 slot2: gen slot3: empty init_backup_root_slot will return slot3 and not slot0. The new name is more appropriate since the function doesn't care whether there is a valid backup in the returned slot or not. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
This function has been superseded by previous commits and is no longer used so just remove it. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Since the filesystem is not well formed and no trees are loaded it's pointless holding the objectid_mutex. Just remove its usage. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
The code responsible for reading and initializing tree roots is scattered in open_ctree among 2 labels, emulating a loop. This is rather confusing to reason about. Instead, factor the code to a new function, init_tree_roots which implements the same logical flow. There are a couple of notable differences, namely: * Instead of using next_backup_root it's using the newly introduced read_backup_root. * If read_backup_root returns an error init_tree_roots propagates the error and there is no special handling of that case e.g. the code jumps straight to 'fail_tree_roots' label. The old code, however, was (erroneously) jumping to 'fail_block_groups' label if next_backup_root did fail, this was unnecessary since the tree roots init logic doesn't modify the state of block groups. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
This function will replace next_root_backup with a much saner/cleaner interface. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
It's no longer needed following cleanups around find_newest_backup_root Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
Backup roots are always written in a circular manner. By definition we can only ever have 1 backup root whose generation equals to that of the superblock. Hence, the 'if' in the for loop will trigger at most once. This is sufficient to return the newest backup root. Furthermore the newest_gen parameter is always set to the generation of the superblock. This value can be obtained from the fs_info. This patch removes the unnecessary code dealing with the wraparound case and makes 'newest_gen' a local variable. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Add blake2b (with 256 bit digest) to the list of possible checksumming algorithms used by BTRFS. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-