1. 26 10月, 2013 1 次提交
  2. 25 10月, 2013 4 次提交
  3. 24 10月, 2013 6 次提交
    • L
      Merge tag 'md/3.12-fixes' of git://neil.brown.name/md · e6036c0b
      Linus Torvalds 提交于
      Pull md bugfixes from Neil Brown:
       "Assorted md bug-fixes for 3.12.
      
        All tagged for -stable releases too"
      
      * tag 'md/3.12-fixes' of git://neil.brown.name/md:
        raid5: avoid finding "discard" stripe
        raid5: set bio bi_vcnt 0 for discard request
        md: avoid deadlock when md_set_badblocks.
        md: Fix skipping recovery for read-only arrays.
      e6036c0b
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · be6e8c76
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and
       one fix which may cause a hang because of request miscounting (sd)"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        [SCSI] sd: call blk_pm_runtime_init before add_disk
        [SCSI] qla2xxx: Fix request queue null dereference.
        [SCSI] BusLogic: Fix an oops when intializing multimaster adapter
      be6e8c76
    • S
      raid5: avoid finding "discard" stripe · d47648fc
      Shaohua Li 提交于
      SCSI discard will damage discard stripe bio setting, eg, some fields are
      changed. If the stripe is reused very soon, we have wrong bios setting. We
      remove discard stripe from hash list, so next time the strip will be fully
      initialized.
      
      Suitable for backport to 3.7+.
      
      Cc: <stable@vger.kernel.org> (3.7+)
      Signed-off-by: NShaohua Li <shli@fusionio.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      d47648fc
    • S
      raid5: set bio bi_vcnt 0 for discard request · 37c61ff3
      Shaohua Li 提交于
      SCSI layer will add new payload for discard request. If two bios are merged
      to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse
      SCSI and cause oops.
      
      Suitable for backport to 3.7+
      
      Cc: stable@vger.kernel.org (v3.7+)
      Reported-by: NJes Sorensen <Jes.Sorensen@redhat.com>
      Signed-off-by: NShaohua Li <shli@fusionio.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
      37c61ff3
    • B
      md: avoid deadlock when md_set_badblocks. · 905b0297
      Bian Yu 提交于
      When operate harddisk and hit errors, md_set_badblocks is called after
      scsi_restart_operations which already disabled the irq. but md_set_badblocks
      will call write_sequnlock_irq and enable irq. so softirq can preempt the
      current thread and that may cause a deadlock. I think this situation should
      use write_sequnlock_irqsave/irqrestore instead.
      
      I met the situation and the call trace is below:
      [  638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010
      [  638.921923]  lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0
      [  638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37
      [  638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013
      [  638.927816]  ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007
      [  638.929829]  ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8
      [  638.931848]  ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8
      [  638.933884] Call Trace:
      [  638.935867]  <IRQ>  [<ffffffff8172ff85>] dump_stack+0x55/0x76
      [  638.937878]  [<ffffffff81730030>] spin_dump+0x8a/0x8f
      [  638.939861]  [<ffffffff81730056>] spin_bug+0x21/0x26
      [  638.941836]  [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0
      [  638.943801]  [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80
      [  638.945747]  [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0
      [  638.947672]  [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50
      [  638.949595]  [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0
      [  638.951504]  [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0
      [  638.953388]  [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140
      [  638.955248]  [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90
      [  638.957116]  [<ffffffff8104fddd>] __do_softirq+0xfd/0x330
      [  638.958987]  [<ffffffff810b964f>] ? __lock_release+0x6f/0x100
      [  638.960861]  [<ffffffff8174a5cc>] call_softirq+0x1c/0x30
      [  638.962724]  [<ffffffff81004c7d>] do_softirq+0x8d/0xc0
      [  638.964565]  [<ffffffff8105024e>] irq_exit+0x10e/0x150
      [  638.966390]  [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60
      [  638.968223]  [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80
      [  638.970079]  <EOI>  [<ffffffff810b964f>] ? __lock_release+0x6f/0x100
      [  638.971899]  [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50
      [  638.973691]  [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50
      [  638.975475]  [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0
      [  638.977243]  [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80
      [  638.978988]  [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456]
      [  638.980723]  [<ffffffff811b5a1d>] bio_endio+0x1d/0x40
      [  638.982463]  [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0
      [  638.984214]  [<ffffffff81306b9f>] blk_update_request+0x7f/0x350
      [  638.985967]  [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90
      [  638.987710]  [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50
      [  638.989439]  [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30
      [  638.991149]  [<ffffffff81308746>] blk_peek_request+0x106/0x250
      [  638.992861]  [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130
      [  638.994561]  [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0
      [  638.996251]  [<ffffffff813040a7>] __blk_run_queue+0x37/0x50
      [  638.997900]  [<ffffffff813045af>] blk_run_queue+0x2f/0x50
      [  638.999553]  [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0
      [  639.001185]  [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40
      [  639.002798]  [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200
      [  639.004391]  [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0
      [  639.005996]  [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0
      [  639.007600]  [<ffffffff81072f6b>] kthread+0xdb/0xe0
      [  639.009205]  [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170
      [  639.010821]  [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0
      [  639.012437]  [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170
      
      This bug was introduce in commit  2e8ac303
      (the first time rdev_set_badblock was call from interrupt context),
      so this patch is appropriate for 3.5 and subsequent kernels.
      
      Cc: <stable@vger.kernel.org> (3.5+)
      Signed-off-by: NBian Yu <bianyu@kedacom.com>
      Reviewed-by: NJianpeng Ma <majianpeng@gmail.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      905b0297
    • L
      md: Fix skipping recovery for read-only arrays. · 61e4947c
      Lukasz Dorau 提交于
      Since:
              commit 7ceb17e8
              md: Allow devices to be re-added to a read-only array.
      
      spares are activated on a read-only array. In case of raid1 and raid10
      personalities it causes that not-in-sync devices are marked in-sync
      without checking if recovery has been finished.
      
      If a read-only array is degraded and one of its devices is not in-sync
      (because the array has been only partially recovered) recovery will be skipped.
      
      This patch adds checking if recovery has been finished before marking a device
      in-sync for raid1 and raid10 personalities. In case of raid5 personality
      such condition is already present (at raid5.c:6029).
      
      Bug was introduced in 3.10 and causes data corruption.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: NPawel Baldysiak <pawel.baldysiak@intel.com>
      Signed-off-by: NLukasz Dorau <lukasz.dorau@intel.com>
      Signed-off-by: NNeilBrown <neilb@suse.de>
      61e4947c
  4. 23 10月, 2013 12 次提交
    • A
      [SCSI] sd: call blk_pm_runtime_init before add_disk · 10c580e4
      Aaron Lu 提交于
      Sujit has found a race condition that would make q->nr_pending
      unbalanced, it occurs as Sujit explained:
      
      "
      sd_probe_async() ->
      	add_disk() ->
      		disk_add_event() ->
      			schedule(disk_events_workfn)
      	sd_revalidate_disk()
      	blk_pm_runtime_init()
      return;
      
      Let's say the disk_events_workfn() calls sd_check_events() which tries
      to send test_unit_ready() and because of sd_revalidate_disk() trying to
      send another commands the test_unit_ready() might be re-queued as the
      tagged command queuing is disabled.
      
      So the race condition is -
      
      Thread 1 			  |		Thread 2
      sd_revalidate_disk()		  |	sd_check_events()
      ...nr_pending = 0 as q->dev = NULL|	scsi_queue_insert()
      blk_runtime_pm_init()		  | 	blk_pm_requeue_request() ->
      				  |	nr_pending = -1 since
      				  |	q->dev != NULL
      "
      
      The problem is, the test_unit_ready request doesn't get counted the
      first time it is queued, so the later decrement of q->nr_pending in
      blk_pm_requeue_request makes it unbalanced.
      
      Fix this by calling blk_pm_runtime_init before add_disk so that all
      requests initiated there will all be counted.
      Signed-off-by: NAaron Lu <aaron.lu@intel.com>
      Reported-and-tested-by: NSujit Reddy Thumma <sthumma@codeaurora.org>
      Cc: stable@vger.kernel.org
      Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
      10c580e4
    • C
      [SCSI] qla2xxx: Fix request queue null dereference. · 36008cf1
      Chad Dupuis 提交于
      If an invalid IOCB is returned on the response queue then the index into the
      request queue map could be invalid and could return to us a bogus value. This
      could cause us to try to deference an invalid pointer and cause an exception.
      
      If we encounter this condition, simply return as no context can be established
      for this response.
      Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
      Signed-off-by: NSaurav Kashyap <saurav.kashyap@qlogic.com>
      Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
      36008cf1
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · 320437af
      Linus Torvalds 提交于
      Pull s390 fixes from Martin Schwidefsky:
       "Several last minute bug fixes.
      
        Two of them are on the larger side for rc7, the dasd format patch for
        older storage devices and the store-clock-fast patch where we have
        been to optimistic with an optimization"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        s390/time: correct use of store clock fast
        s390/vmlogrdr: fix array access in vmlogrdr_open()
        s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32()
        s390/dasd: check for availability of prefix command during format
        s390/mm,kvm: fix software dirty bits vs. kvm for old machines
      320437af
    • L
      Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · 90338325
      Linus Torvalds 提交于
      Pull thermal management fixes from Zhang Rui:
       "These includes several commits that are necessary to properly fix
        regression for TMU test MUX address setting after reset, for exynos
        thermal driver.
      
        Specifics:
      
         - fix a regression that the removal of setting a certain field at TMU
           configuration setting results in immediately shutdown after reset
           on Exynos4412 SoC.
      
         - revert a patch which tries to link the thermal_zone device and its
           hwmon node but breaks libsensors.
      
         - fix a deadlock/lockdep warning issue in x86_pkg_temp thermal
           driver, which can be reproduced on a buggy platform only.
      
         - fix ti-soc-thermal driver to fall back on bandgap reading when
           reading from PCB temperature sensor fails"
      
      * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        Revert "drivers: thermal: parent virtual hwmon with thermal zone"
        drivers: thermal: allow ti-soc-thermal run without pcb zone
        thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412
        thermal: exynos: Provide separate TMU data for Exynos4412
        thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger()
        Thermal: x86_pkg_temp: change spin lock
      90338325
    • R
      platform/x86: fix asus-wmi build error · ea89e1d3
      Randy Dunlap 提交于
      Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m
      by preventing that combination.
      
        drivers/built-in.o: In function `asus_wmi_probe':
        asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister'
      Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ea89e1d3
    • K
      bcache: Fixed incorrect order of arguments to bio_alloc_bioset() · d4eddd42
      Kent Overstreet 提交于
      Signed-off-by: NKent Overstreet <kmo@daterainc.com>
      Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d4eddd42
    • L
      Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · f4e5e14f
      Linus Torvalds 提交于
      Pull media fixes from Mauro Carvalho Chehab:
       - Compilation fixes for GCC < 4.4.6
       - one Kbuild dependency select fix (selecting videobuf on msi3101)
       - driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg,
         saa7134 and adv7511
       - some device quirks needed to make them work properly
       - some videobuf2 core regression fixes for some features used only on
         embedded drivers
      
      * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
        [media] saa7134: Fix crash when device is closed before streamoff
        [media] adv7511: fix error return code in adv7511_probe()
        [media] ths8200: fix compilation with GCC < 4.4.6
        [media] ad9389b: fix compilation with GCC < 4.4.6
        [media] adv7511: fix compilation with GCC < 4.4.6
        [media] adv7842: fix compilation with GCC < 4.4.6
        [media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field
        [media] videobuf2-dc: Fix support for mappings without struct page in userptr mode
        [media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused'
        [media] mx3-camera: locking cleanup in mx3_videobuf_queue()
        [media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out()
        [media] tda10071: change firmware download condition
        [media] msi3101: correct max videobuf2 alloc
        [media] Add HCL T12Rg-H to STK webcam upside-down table
        [media] msi3101: Kconfig select VIDEOBUF2_VMALLOC
        [media] msi3101: msi3101_ioctl_ops can be static
        [media] e4000: fix PLL calc bug on 32-bit arch
        [media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000
        [media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
      f4e5e14f
    • L
      Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband · 0d645a8b
      Linus Torvalds 提交于
      Pull infiniband bugfix from Roland Dreier:
       "Disable not-quite-ready userspace ABI for IB flow steering"
      
      * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
        IB/core: Temporarily disable create_flow/destroy_flow uverbs
      0d645a8b
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · db10accf
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
       "Sorry I let so much accumulate, I was in Buffalo and wanted a few
        things to cook in my tree for a while before sending to you.  Anyways,
        it's a lot of little things as usual at this stage in the game"
      
       1) Make bonding MAINTAINERS entry reflect reality, from Andy
          Gospodarek.
      
       2) Fix accidental sock_put() on timewait mini sockets, from Eric
          Dumazet.
      
       3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6
          addresses, from François CACHEREUL.
      
       4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan
          Carpenter.
      
       5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric
          Dumazet.
      
       6) SFC driver bug fixes from Ben Hutchings.
      
       7) Fix TX packet scheduling wedge after channel change in ath9k driver,
          from Felix Fietkau.
      
       8) Fix user after free in BPF JIT code, from Alexei Starovoitov.
      
       9) Source address selection test is reversed in
          __ip_route_output_key(), fix from Jiri Benc.
      
      10) VLAN and CAN layer mis-size netlink attributes, from Marc
          Kleine-Budde.
      
      11) Fix permission checks in sysctls to use current_euid() instead of
          current_uid().  From Eric W Biederman.
      
      12) IPSEC policies can go away while a timer is still pending for them,
          add appropriate ref-counting to fix, from Steffen Klassert.
      
      13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth
          chips, from Nguyen Hong Ky and Simon Horman.
      
      14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai.
      
      15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama
          Ghorbel.
      
      16) Fix typo in fq_change(), we were assigning "initial quantum" to
          "quantum".  From Eric Dumazet.
      
      17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise
          FQ packet scheduler does not pace those flows properly.  Also from
          Eric Dumazet.
      
      18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland.
      
      19) l2tp_xmit_skb() can be called from process context, not just softirq
          context, so we must always make sure to BH disable around it.  From
          Eric Dumazet.
      
      20) On qdisc reset, we forget to purge the RB tree of SKBs in netem
          packet scheduler.  From Stephen Hemminger.
      
      21) Fix info leak in farsync WAN driver ioctl() handler, from Dan
          Carpenter and Salva Peiró.
      
      22) Fix PHY reset and other issues in dm9000 driver, from Nikita
          Kiryanov and Michael Abbott.
      
      23) When hardware can do SCTP crc32 checksums, we accidently don't
          disable the csum offload when IPSEC transformations have been
          applied.  From Fan Du and Vlad Yasevich.
      
      24) Tail loss probing in TCP leaves the socket in the wrong congestion
          avoidance state.  From Yuchung Cheng.
      
      25) In CPSW driver, enable NAPI before interrupts are turned on, from
          Markus Pargmann.
      
      26) Integer underflow and dual-assignment in YAM hamradio driver, from
          Dan Carpenter.
      
      27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must
          unclone it.  This fixes various hard to track down crashes in
          drivers where the SKBs ->gso_segs was changing right from underneath
          the driver during TX queueing.  From Eric Dumazet.
      
      28) Fix the handling of VLAN IDs, and in particular the special IDs 0
          and 4095, in the bridging layer.  From Toshiaki Makita.
      
      29) Another info leak, this time in wanxl WAN driver, from Salva Peiró.
      
      30) Fix race in socket credential passing, from Daniel Borkmann.
      
      31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly,
          from Seif Mazareeb.
      
      32) Fix identification of fragmented frames in ipv4/ipv6 UDP
          Fragmentation Offload output paths, from Jiri Pirko.
      
      33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel
          Elior.
      
      34) When we removed the explicit neighbour pointer from ipv6 routes a
          slight regression was introduced for users such as IPVS, xt_TEE, and
          raw sockets.  We mix up the users requested destination address with
          the routes assigned nexthop/gateway.  From Julian Anastasov and
          Simon Horman.
      
      35) Fix stack overruns in rt6_probe(), the issue is that can end up
          doing two full packet xmit paths at the same time when emitting
          neighbour discovery messages.  From Hannes Frederic Sowa.
      
      36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from
          Mariusz Ceier.
      
      37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT
          sample, from Neal Cardwell.
      
      38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from
          Steffen Klassert.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
        ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter
        ax88179_178a: Correct the RX error definition in RX header
        Revert "bridge: only expire the mdb entry when query is received"
        tcp: initialize passive-side sk_pacing_rate after 3WHS
        davinci_emac.c: Fix IFF_ALLMULTI setup
        mac802154: correct a typo in ieee802154_alloc_device() prototype
        ipv6: probe routes asynchronous in rt6_probe
        netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
        ipv6: fill rt6i_gateway with nexthop address
        ipv6: always prefer rt6i_gateway if present
        bnx2x: Set NETIF_F_HIGHDMA unconditionally
        bnx2x: Don't pretend during register dump
        bnx2x: Lock DMAE when used by statistic flow
        bnx2x: Prevent null pointer dereference on error flow
        bnx2x: Fix config when SR-IOV and iSCSI are enabled
        bnx2x: Fix Coalescing configuration
        bnx2x: Unlock VF-PF channel on MAC/VLAN config error
        bnx2x: Prevent an illegal pointer dereference during panic
        bnx2x: Fix Maximum CoS estimation for VFs
        drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing
        ...
      db10accf
    • F
      ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter · f11a5bc1
      Freddy Xin 提交于
      Add VID:DID for Samsung USB Ethernet Adapter.
      Signed-off-by: NFreddy Xin <freddy@asix.com.tw>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f11a5bc1
    • F
      ax88179_178a: Correct the RX error definition in RX header · 7e78b83c
      Freddy Xin 提交于
      Correct the definition of AX_RXHDR_CRC_ERR and
      AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr
      seperately.
      Signed-off-by: NFreddy Xin <freddy@asix.com.tw>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7e78b83c
    • L
      Revert "bridge: only expire the mdb entry when query is received" · 454594f3
      Linus Lüssing 提交于
      While this commit was a good attempt to fix issues occuring when no
      multicast querier is present, this commit still has two more issues:
      
      1) There are cases where mdb entries do not expire even if there is a
      querier present. The bridge will unnecessarily continue flooding
      multicast packets on the according ports.
      
      2) Never removing an mdb entry could be exploited for a Denial of
      Service by an attacker on the local link, slowly, but steadily eating up
      all memory.
      
      Actually, this commit became obsolete with
      "bridge: disable snooping if there is no querier" (b00589af)
      which included fixes for a few more cases.
      
      Therefore reverting the following commits (the commit stated in the
      commit message plus three of its follow up fixes):
      
      ====================
      Revert "bridge: update mdb expiration timer upon reports."
      This reverts commit f144febd.
      Revert "bridge: do not call setup_timer() multiple times"
      This reverts commit 1faabf2a.
      Revert "bridge: fix some kernel warning in multicast timer"
      This reverts commit c7e8e8a8.
      Revert "bridge: only expire the mdb entry when query is received"
      This reverts commit 9f00b2e7.
      ====================
      
      CC: Cong Wang <amwang@redhat.com>
      Signed-off-by: NLinus Lüssing <linus.luessing@web.de>
      Reviewed-by: NVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      454594f3
  5. 22 10月, 2013 17 次提交
    • M
      sony-laptop: don't change keyboard backlight settings · 294d31e8
      Mattia Dongili 提交于
      Do not touch keyboard backlight unless explicitly passed a module
      parameter.  In this way we won't make wrong assumptions about what are
      good default values since they actually are different from model to
      model.
      
      The only side effect is that we won't know what is the current value
      until set via the sysfs attributes.
      Signed-off-by: NMattia Dongili <malattia@linux.it>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      294d31e8
    • R
      vfs: fix new kernel-doc warnings · 69c88dc7
      Randy Dunlap 提交于
      Move kernel-doc notation to immediately before its function to eliminate
      kernel-doc warnings introduced by commit db14fc3a ("vfs: add
      d_walk()")
      
        Warning(fs/dcache.c:1343): No description found for parameter 'data'
        Warning(fs/dcache.c:1343): No description found for parameter 'dentry'
        Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount'
      Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
      Cc: Miklos Szeredi <mszeredi@suse.cz>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      69c88dc7
    • R
      fs/namei.c: fix new kernel-doc warning · 606d6fe3
      Randy Dunlap 提交于
      Add @path parameter to fix kernel-doc warning.
      Also fix a spello/typo.
      
        Warning(fs/namei.c:2304): No description found for parameter 'path'
      Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      606d6fe3
    • L
      Merge tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 93cd0004
      Linus Torvalds 提交于
      Pull sound fixes from Takashi Iwai:
       "The pending last-minute ASoC fixes, all of which are driver-local
        (tlv320aic3x, rcar, pcm1681, pcm1792a, omap, fsl) and should be pretty
        safe to apply"
      
      * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: Add MAINTAINERS entry for dmaengine helpers
        ASoC: pcm1792a: Fix max_register setting
        ASoC: pcm1681: Fix max_register setting
        ASoC: pcm1681: Fix max_register setting
        ASoC: rcar: fixup generation checker
        ASoC: tlv320aic3x: Connect 'Left Line1R Mux' and 'Right Line1L Mux'
        ASoC: fsl: imx-ssi: fix probe on imx31
        ASoC: omap: Fix incorrect ARM dependency
        ASoC: fsl: Fix sound on mx31moboard
        ASoC: fsl_ssi: Fix irq_of_parse_and_map() return value check
      93cd0004
    • L
      Merge tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy · d24fec39
      Linus Torvalds 提交于
      Pull jfs bugfix from David Kleikamp:
       "Just a patch to fix an oops in an error path"
      
      * tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy:
        jfs: fix error path in ialloc
      d24fec39
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · b403b73c
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Travelling slowed down getting these out.
      
        Two vmwgfx fixes, a radeon revert to avoid a regression, i915 fixes,
        and some ioctl sizing issues fixed with 32 on 64"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
        drm/radeon/audio: don't set speaker allocation on DCE4+
        drm/radeon: rework audio option
        drm/radeon/audio: don't set speaker allocation on DCE3.2
        drm/radeon: make missing smc ucode non-fatal (CI)
        drm/radeon: make missing smc ucode non-fatal (r7xx-SI)
        drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3
        drm/radeon: stop the leaks in cik_ib_test
        drm/radeon/atom: workaround vbios bug in transmitter table on rs780
        drm/i915: Disable GGTT PTEs on GEN6+ suspend
        drm/i915: Make PTE valid encoding optional
        drm: Pad drm_mode_get_connector to 64-bit boundary
        drm: Prevent overwriting from userspace underallocating core ioctl structs
        drm/vmwgfx: Don't kill clients on VT switch
        drm/vmwgfx: Don't put resources with invalid id's on lru list
        drm/i915: disable LVDS clock gating on CPT v2
      b403b73c
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 1c241131
      Linus Torvalds 提交于
      Pull HID fixes from Jiri Kosina:
      
       - a partial revert of exponent parsing changes to make "Unit" exponent
         item work properly again, by Nikolai Kondrashov
      
       - a few new device IDs additions piggy-backing, by AceLan Kao and David
         Herrmann
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: wiimote: add LEGO-wiimote VID
        HID: Fix unit exponent parsing again
        HID: usbhid: quirk for SiS Touchscreen
        HID: usbhid: quirk for Synaptics Large Touchccreen
      1c241131
    • L
      Merge branch 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata · 19eddab9
      Linus Torvalds 提交于
      Pull libata fixes from Tejun Heo:
       "The only interesting bit is ata_eh_qc_retry() update which fixes a
        problem where a SG_IO command may fail across suspend/resume cycle
        without the command actually being at fault.
      
        Other changes are low level driver specific and fairly low impact"
      
      * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
        libahci: fix turning on LEDs in ahci_start_port()
        libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures
        ahci_platform: use dev_info() instead of printk()
        ahci: use dev_info() instead of printk()
        pata_isapnp: Don't use invalid I/O ports
      19eddab9
    • L
      Merge branch 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · ee7eafc9
      Linus Torvalds 提交于
      Pull cgroup fixes from Tejun Heo:
       "Two late fixes for cgroup.
      
        One fixes descendant walk introduced during this rc1 cycle.  The other
        fixes a post 3.9 bug during task attach which can lead to hang.  Both
        fixes are critical and the fixes are relatively straight-forward"
      
      * 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        cgroup: fix to break the while loop in cgroup_attach_task() correctly
        cgroup: fix cgroup post-order descendant walk of empty subtree
      ee7eafc9
    • M
      s390/time: correct use of store clock fast · 8c071b0f
      Martin Schwidefsky 提交于
      The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
      It can happen that the value stored on one CPU is smaller than the value
      stored on another CPU, although the order of the stores is the other
      way around. This can cause deltas of get_tod_clock() values to become
      negative when they should not be.
      
      We need to be more careful with store-clock-fast, this patch partially
      reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time:
      always use stckf instead of stck if available". The get_tod_clock()
      function now uses the store-clock-extended (STCKE) instruction.
      get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
      is acceptable e.g. for wait loops local to a CPU.
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      8c071b0f
    • D
      Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · 579123fd
      Dave Airlie 提交于
      Most just regression fixes for audio, dpm, and uvd, plus
      a resource leak fix for cik.
      
      * 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
        drm/radeon/audio: don't set speaker allocation on DCE4+
        drm/radeon: rework audio option
        drm/radeon/audio: don't set speaker allocation on DCE3.2
        drm/radeon: make missing smc ucode non-fatal (CI)
        drm/radeon: make missing smc ucode non-fatal (r7xx-SI)
        drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3
        drm/radeon: stop the leaks in cik_ib_test
        drm/radeon/atom: workaround vbios bug in transmitter table on rs780
      579123fd
    • D
      Merge tag 'drm-intel-fixes-2013-10-21' of... · 3bcec5f0
      Dave Airlie 提交于
      Merge tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
      
      Just an lvds clock gating fix and a pte clearing hack for hsw to avoid
      memory corruption when hibernating - something doesn't seem to switch off
      properly, we're still investigating.
      
      * tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel: (96 commits)
        drm/i915: Disable GGTT PTEs on GEN6+ suspend
        drm/i915: Make PTE valid encoding optional
        drm/i915: disable LVDS clock gating on CPT v2
      3bcec5f0
    • N
      tcp: initialize passive-side sk_pacing_rate after 3WHS · 02cf4ebd
      Neal Cardwell 提交于
      For passive TCP connections, upon receiving the ACK that completes the
      3WHS, make sure we set our pacing rate after we get our first RTT
      sample.
      
      On passive TCP connections, when we receive the ACK completing the
      3WHS we do not take an RTT sample in tcp_ack(), but rather in
      tcp_synack_rtt_meas(). So upon receiving the ACK that completes the
      3WHS, tcp_ack() leaves sk_pacing_rate at its initial value.
      
      Originally the initial sk_pacing_rate value was 0, so passive-side
      connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs
      made in the first RTT. With a default initial cwnd of 10 packets, this
      happened to be correct for RTTs 5ms or bigger, so it was hard to
      see problems in WAN or emulated WAN testing.
      
      Since 7eec4174 ("pkt_sched: fq: fix non TCP flows pacing"), the
      initial sk_pacing_rate is 0xffffffff. So after that change, passive
      TCP connections were keeping this value (and using large numbers of
      segments per skbuff) until receiving an ACK for data.
      Signed-off-by: NNeal Cardwell <ncardwell@google.com>
      Cc: Eric Dumazet <edumazet@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Acked-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      02cf4ebd
    • M
      davinci_emac.c: Fix IFF_ALLMULTI setup · d69e0f7e
      Mariusz Ceier 提交于
      When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't,
      emac_dev_mcast_set should only enable RX of multicasts and reset
      MACHASH registers.
      
      It does this, but afterwards it either sets up multicast MACs
      filtering or disables RX of multicasts and resets MACHASH registers
      again, rendering IFF_ALLMULTI flag useless.
      
      This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and
      disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set.
      
      Tested with kernel 2.6.37.
      Signed-off-by: NMariusz Ceier <mceier+kernel@gmail.com>
      Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d69e0f7e
    • A
      mac802154: correct a typo in ieee802154_alloc_device() prototype · 7e4d8a19
      Alexandre Belloni 提交于
      This has no other impact than a cosmetic one.
      Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7e4d8a19
    • H
      ipv6: probe routes asynchronous in rt6_probe · c2f17e82
      Hannes Frederic Sowa 提交于
      Routes need to be probed asynchronous otherwise the call stack gets
      exhausted when the kernel attemps to deliver another skb inline, like
      e.g. xt_TEE does, and we probe at the same time.
      
      We update neigh->updated still at once, otherwise we would send to
      many probes.
      
      Cc: Julian Anastasov <ja@ssi.bg>
      Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c2f17e82
    • D
      Merge branch 'rt6i_gateway' · 3a70417c
      David S. Miller 提交于
      Julian Anastasov says:
      
      ====================
      ipv6: use rt6i_gateway as nexthop
      
      	The following patchset makes sure that rt6i_gateway
      contains valid nexthop information in all cases, so that
      we can use different nexthop for sending.
      
      	The first patch is a simple fix that makes IPVS, TEE,
      RAW(hdrincl) and RTF_DYNAMIC(without RTF_GATEWAY) work as
      before 3.9. There is a single corner case not solved by
      this patch: RAW(hdrincl) or TEE using local address for
      nexthop, a silly feature, I guess. In this case we
      see zeroes in rt6i_gateway because we get route that is not
      cloned. This is solved only with patch 2.
      
      	The second patch is an optimization that makes sure
      all resulting routes have rt6i_gateway filled, so that we
      can avoid the complex ipv6_addr_any() call added to rt6_nexthop()
      by patch 1. And it sets rt6i_gateway for local routes, a case
      not handled by patch 1.
      
      	The third patch uses the new rt6_nexthop() function to fix
      the matching of gateways in the same way as commit bbb5823c
      ("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper")
      fixes nf_conntrack_h323_main.c for IPv4. Currently, it depends on
      the new definition of rt6_nexthop() in patch 2. Actually, if
      patch 2 is applied, patch 3 becomes a cosmetic change.
      
      	I see the following two alternatives for applying these
      patches:
      
      1. Linger patch 2 in net-next to avoid surprises in the upcoming
      release. In this case patch 3 can be reworked not to depend on
      the new rt6_nexthop() definition in patch 2. I guess this is a
      better option, so that patch 2 can be reviewed and tested for
      longer time.
      
      2. Include all 3 patches in net tree - more risky because this
      is my first attempt to change IPv6.
      
      	Here is the situation as handled by patch 2:
      
      	In IPv6 the resolved routes are always host routes (/128
      with DST_HOST), mostly cloned ones. We allow routes in FIB
      to contain rt6i_gateway with zeroes (eg. for local subnets) but
      on cloning we can fill the rt6i_gateway field in result.
      This works even without this patchset.
      
      	There is a single special case where dst is provided as
      skb_dst directly without a routing call: icmp6_dst_alloc(). It is a
      private dst allocated just for the particular ICMP packet. Patch 2
      fills rt6i_gateway in this case, needed for the new rt6_nexthop()
      simplification.
      
      	The last case is addrconf_dst_alloc(), it can put in
      FIB local/anycast routes when addresses are added. Patch 2
      needs to fill rt6i_gateway in this case because such routes
      are returned without cloning.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3a70417c