* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: GEM on PAE has problems - disable it for now.
  drm/i915: Don't return busy for buffers left on the flushing list.

* 'for-linus' of git://neil.brown.name/md:
  md: Don't read past end of bitmap when reading bitmap.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: ibmphp: Fix module ref count underflow
  PCI hotplug: acpiphp wants a 64-bit _SUN
  PCI: pciehp: fix unexpected power off with pciehp_force
  PCI: fix aer resume sanity check

On PAE systems, GEM allocates pages using shmem, and passes these
pages to be bound into AGP, however the AGP interfaces + the x86
set_memory interfaces all take unsigned long not dma_addr_t.

The initial fix for this was a mess, so we need to do this correctly
for 2.6.29.
Signed-off-by: NDave Airlie <airlied@redhat.com>

These buffers don't have active rendering still occurring to them, they just
need either a flush to be emitted or a retire_requests to occur so that we
notice they're done.  Return unbusy so that one of the two occurs.  The two
expected consumers of this interface (OpenGL and libdrm_intel BO cache) both
want this behavior.
Signed-off-by: NEric Anholt <eric@anholt.net>
Acked-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we read the write-intent-bitmap off the device, we currently
read a whole number of pages.
When PAGE_SIZE is 4K, this works due to the alignment we enforce
on the superblock and bitmap.
When PAGE_SIZE is 64K, this case read past the end-of-device
which causes an error.

When we write the superblock, we ensure to clip the last page
to just be the required size.  Copy that code into the read path
to just read the required number of sectors.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: stable@kernel.org

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_xor: dma_map destination DMA_BIDIRECTIONAL
  dmaengine: protect 'id' from concurrent registrations
  ioat: wait for self-test completion

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: favr-32 build fix
  ATSTK1006: Fix boot from NAND flash
  avr32: remove .note.gnu.build-id section when making vmlinux.bin
  avr32: Enable pullup on USART TX lines

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: Fix bug in bnx2_free_rx_mem().
  irda: Add irda_skb_cb qdisc related padding
  jme: Fixed a typo
  net: kernel BUG at drivers/net/phy/mdio_bus.c:165!
  drivers/net: starfire: Fix napi ->poll() weight handling
  tlan: Fix pci memory unmapping
  enc28j60: use netif_rx_ni() to deliver RX packets
  tlan: Fix small (< 64 bytes) datagram transmissions
  netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: We need to implement arch_ptrace_stop().

Update John McCutchan and Robert Love's email addresses for
maintenance of inotify
Signed-off-by: NJohn McCutchan <john@johnmccutchan.com>
Acked-by: NRobert Love <rlove@rlove.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The favr-32 board code still refers to the old asm/arch header files
which were moved to mach/ some time ago.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

Enable JFFS2 write buffer support so that the kernel can access a root
filesystem in NAND flash.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

DMA memory for the jumbo rx page rings was freed incorrectly using the
wrong local variable as the array index.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I happened to notice that the ibmphp hotplug driver does something
rather silly in its init routine.  It purposely calls module_put so as
to underflow its module ref count to avoid being removed from the
kernel.  This is bad practice, and wrong, since it provides a window for
subsequent module_gets to reset the refcount to zero, allowing an unload
to race in and cause all sorts of mysterious panics.  If the module is
unsafe to load, simply omitting the module_exit parameter is sufficient
to prevent the kernel from allowing the unload.
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We need to pad irda_skb_cb in order to keep it safe accross dev_queue_xmit()
calls. This is some ugly and temporary hack triggered by recent qisc code
changes.
Even though it fixes bugzilla.kernel.org bug #11795, it will be replaced by a
proper fix before 2.6.29 is released.
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-s3c2410: fix check for being in suspend.
  i2c-cpm: Detect and report NAK right away instead of timing out

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Add JBD2 compat feature bit.
  ocfs2: Always update xattr search when creating bucket.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display
  USB: set correct configuration in probe of ti_usb_3410_5052
  USB: add 5372:2303 to pl2303
  USB: skip Set-Interface(0) if already in altsetting 0
  USB: fix comment about endianness of descriptors
  USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour
  usbmon: drop bogus 0t from usbmon.txt
  USB: gadget: fix rndis working at high speed
  USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID
  USB: tty: SprogII DCC controller identifiers
  usb-storage: update unusual_devs entry for Nokia 5310
  USB: Unusual devs patch for Nokia 3500c
  USB: storage: unusual_devs.h: Nokia 3109c addition
  USB: fix problem with usbtmc driver not loading properly

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  STAGING: Move staging drivers back to staging-specific menu
  driver core: add newlines to debugging enabled/disabled messages
  xilinx_hwicap: remove improper wording in license statement
  driver core: fix using 'ret' variable in unregister_dynamic_debug_module

While testing a kernel with memory poisoning enabled, I saw some warnings
about the redzone getting clobbered when chasing DFS referrals. The
buffer allocation for the unicode converted version of the searchName is
too small and needs to take null termination into account.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc: Fix corruption error in rh_alloc_fixed()
  powerpc/fsl-booke: Fix the miss interrupt restore

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Both messages are missing the newline and thus dmesg output gets
scrambled.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

GPLv2 doesn't allow additional restrictions to be imposed on any
code, so this wording needs to be removed from these files.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The 'ret' variable is assigned, but not used in the return statement. Fix this.
Signed-off-by: NJohann Felix Soden <johfel@users.sourceforge.net>
Acked-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add id for the Hewlett-Packard LD220-HP POS pole display.

Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard
Signed-off-by: NMike Provencher <mike.provencher@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This driver transfers firmware. It may just as well set the correct
configuration.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the "Superial" USB-Serial converter to pl2303 so that it
is detected, by the correct driver.  Adds the relevant vendor:product
(5372:2303) to the device tables in pl2303.c & pl2303.h.  The patch has
been tested against 2.6.24-22-generic.
Signed-off-by: NMatthew D Arnold <matthew.arnold-1@uts.edu.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When a driver unbinds from an interface, usbcore always sends a
Set-Interface request to reinstall altsetting 0.  Unforunately, quite
a few devices have buggy firmware that crashes when it receives this
request.

To avoid such problems, this patch (as1180) arranges to send the
Set-Interface request only when the interface is not already in
altsetting 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a comment and clarifies the documentation about the
endianness of descriptors. The current policy is that descriptors will
be little-endian at the API even on big-endian systems; however the
/proc/bus/usb API predates this policy and presents descriptors with
some multibyte fields byte-swapped.
Signed-off-by: NPhil Endecott <usb_endian_patch@chezphil.org>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 7bb5ea54 (usb gadget serial: use composite gadget framework)
changed the default for the use_acm parameter from 0 to 1.
Update the documentation to match.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The example is incorrect: there is no 0t socket (the '1t' format has no
bus number in it). Also, correct the broken sentence for USB Tag.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix a bug specific to highspeed mode in the recently updated RNDIS
support:  it wasn't setting up the high speed notification endpoint,
which prevented high speed RNDIS links from working.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Tested-by: NAnand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following patch adds in the USB PID for Ewert Energy System's CANdapter
device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio
device driver.

The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu.

Relevant output from /proc/bus/usb/devices (With patch installed):

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=9f80 Rev= 6.00
S:  Manufacturer=Ewert Energy Systems
S:  Product=CANdapter
S:  SerialNumber=A6RGB3Z3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Signed-off-by: NAndrew Ewert <andrew@ewertenergy.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Someone on rmweb reminded me this had been overlooked from ages ago..

Add the identifiers for the Sprog II USB. This is a DCC control interface
using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been
using it with insmod options for ages, this just puts it into the driver
data.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1179) updates the unusual_devs entry for Nokia's 5310
phone to include a more recent firmware revision.

This fixes Bugzilla #12099.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NRobson Roberto Souza Peixoto <robsonpeixoto@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0060 Rev= 5.51
S:  Manufacturer=Nokia
S:  Product=Nokia 3500c
S:  SerialNumber=357687010280751
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: Ozan Sener <themgzzy@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

2.6.26(.x, cannot remember) could handle the microSD card in my Nokia
3109c attached via USB as mass storage, 2.6.27(.x, up to and included
2.6.27.8) cannot. Please find the attached patch which fixes this
regression, and a copy of /proc/bus/usb/devices with my phone plugged in
running with this patch on Frugalware.

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0063 Rev= 6.01
S:  Manufacturer=Nokia
S:  Product=Nokia 3109c
S:  SerialNumber=359561013742570
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: CSÉCSY László <boobaa@frugalware.org>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>