- 06 2月, 2009 6 次提交
-
-
由 Gautam Kachroo 提交于
neightbl_dump_info and neigh_dump_table can skip entries if the *fill*info functions return an error. This results in an incomplete dump ((invoked by netlink requests for RTM_GETNEIGHTBL or RTM_GETNEIGH) nidx and idx should not be incremented if the current entry was not placed in the output buffer Signed-off-by: NGautam Kachroo <gk@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Just like PKTINFO, limit the options area to 64K. Based upon report by Eric Sesterhenn and analysis by Roland Dreier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 64ff3b93. Jeff Chua reports that it breaks rlogin for him. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer. This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive. Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 5 次提交
-
-
由 Andy Fleming 提交于
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Fleming 提交于
BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Divy Le Ray 提交于
The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Reinette Chatre 提交于
This is the right thing to do and fixes the following warning: [ 115.012278] ------------[ cut here ]------------ [ 115.012281] WARNING: at drivers/pci/pci-driver.c:370 pci_legacy_suspend+0x85/0xc2() [ 115.012285] Hardware name: Latitude D630 [ 115.012301] PCI PM: Device state not saved by iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012304] Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipv6 acpi_cpufreq kvm_intel kvm snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_seq_device snd_pcm_oss snd_mixer_oss ecb snd_pcm cryptomgr aead snd_timer crypto_blkcipher snd snd_page_alloc ohci1394 crypto_hash crypto_algapi ch341 ieee1394 usbserial thermal iwl3945 mac80211 led_class lib80211 tg3 processor i2c_i801 i2c_core sg cfg80211 libphy usbhid battery ac button sr_mod cdrom evdev dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: microcode] [ 115.012374] Pid: 4163, comm: pm-suspend Not tainted 2.6.29-rc3-00227-gf1dd849-dirty #67 [ 115.012377] Call Trace: [ 115.012382] [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed [ 115.012387] [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78 [ 115.012390] [<ffffffff80254f08>] ? up+0x34/0x39 [ 115.012394] [<ffffffff80362319>] ? acpi_ut_release_mutex+0x5d/0x61 [ 115.012397] [<ffffffff803584b2>] ? acpi_get_data+0x5e/0x70 [ 115.012400] [<ffffffff80363dd9>] ? acpi_bus_get_device+0x25/0x39 [ 115.012403] [<ffffffff80363e98>] ? acpi_bus_power_manageable+0x11/0x29 [ 115.012406] [<ffffffff803462f7>] ? acpi_pci_power_manageable+0x17/0x19 [ 115.012410] [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101 [ 115.012418] [<ffffffffa01f28e9>] ? iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012422] [<ffffffff803401e6>] pci_legacy_suspend+0x85/0xc2 [ 115.012425] [<ffffffff80340316>] pci_pm_suspend+0x34/0x86 [ 115.012429] [<ffffffff8039d7ce>] pm_op+0x52/0xe5 [ 115.012432] [<ffffffff8039dd78>] device_suspend+0x32a/0x451 [ 115.012436] [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a [ 115.012439] [<ffffffff8026a128>] enter_state+0x110/0x164 [ 115.012442] [<ffffffff8026a233>] state_store+0xb7/0xd7 [ 115.012446] [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19 [ 115.012449] [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119 [ 115.012453] [<ffffffff802baa7a>] vfs_write+0xae/0x137 [ 115.012456] [<ffffffff802babc7>] sys_write+0x47/0x70 [ 115.012459] [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b [ 115.012467] ---[ end trace 829828966f6f24dc ]--- Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Tested-by: NMing Lei <tom.leiming@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
Cleans uCode key table bit map iwl_clear_stations_table since all stations are cleared also the key table must be. Since the keys are not removed properly on suspend by mac80211 this may result in exhausting key table on resume leading to memory corruption during removal Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 2月, 2009 5 次提交
-
-
由 Randy Dunlap 提交于
Fix sunrpc/rdma build dependencies. Survives 12 build combinations of INET, IPV6, SUNRPC, INFINIBAND, and INFINIBAND_ADDR_TRANS. ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
On machine were no IO ports are assigned the call to pci_enable_device() will fail, even if need_ioport is false, we need to use pci_enable_device_mem() here. Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dean Nelson 提交于
A recent patch by Stephen Hemminger to convert XPNET to use net_device_ops and internal net_device_stats failed to link the net_device_ops structure to the net_device structure. See commit e8ac9c55 ("xpnet: convert devices to new API"). Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cord Walter 提交于
Signed-off-by: NCord Walter <qord@cwalter.net> Signed-off-by: NKomuro <komurojun-mbn@nifty.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Filip Aben 提交于
This patch adds a few device ID's. It also removes an ID that was used in an internal engineering version of a device and will never see commercial light. Even if this ID will be 'recycled' in the future, which is very unlikely, we don't know what kind of device will be behind it. Therefore it's safer to remove it. Signed-off-by: NFilip Aben <f.aben@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2009 24 次提交
-
-
由 David S. Miller 提交于
-
由 Maciej Sosnowski 提交于
Change spin_locks to irqsave to prevent dead-locks. Protect adding and deleting to/from dca_providers list. Drop the lock during dca_sysfs_add_req() and dca_sysfs_remove_req() calls as they might sleep (use GFP_KERNEL allocation). Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
while (limit--) if (test()) break; if (limit <= 0) goto test_failed; In the last iteration, limit is decremented after the test to 0. If just thereafter test() succeeds and a break occurs, the goto still occurs because limit is 0. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roel Kluin 提交于
while (timeout--) { ... } timeout becomes -1 if the loop isn't ended otherwise, not 0. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: Change link order of pciehp & acpiphp PCI hotplug: fakephp: Allocate PCI resources before adding the device PCI MSI: Fix undefined shift by 32 PCI PM: Do not wait for buses in B2 or B3 during resume PCI PM: Power up devices before restoring their state PCI PM: Fix hibernation breakage on EeePC 701 PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs PCI PM: Fix suspend error paths and testing facility breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: fix per cpu kmem_cache_cpu array memory leak kmalloc: return NULL instead of link failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: fbdev/atyfb: Fix DSP config on some PowerMacs & PowerBooks powerpc: Fix oops on some machines due to incorrect pr_debug() powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/net powerpc/5200: update device tree binding documentation powerpc/5200: Bugfix for PCI mapping of memory and IMMR powerpc/5200: update defconfigs
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched_rt: don't use first_cpu on cpumask created with cpumask_and sched: fix buddie group latency sched: clear buddies more aggressively sched: symmetric sync vs avg_overlap sched: fix sync wakeups cpuset: fix possible deadlock in async_rebuild_sched_domains
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (45 commits) V4L/DVB (10411): s5h1409: Perform s5h1409 soft reset after tuning V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audio V4L/DVB (10229): ivtv: fix memory leak V4L/DVB (10385): gspca - main: Fix memory leak when USB disconnection while streaming. V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and Pre-emption Disabled V4L/DVB (10317): radio-mr800: fix radio->muted and radio->stereo V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback. V4L/DVB (10288): af9015: bug fix: stick does not work always when plugged V4L/DVB (10287): af9015: fix second FE V4L/DVB (10270): saa7146: fix unbalanced mutex_lock/unlock V4L/DVB (10265): budget.c driver: Kernel oops: "BUG: unable to handle kernel paging request at ffffffff V4L/DVB (10261): em28xx: fix kernel panic on audio shutdown V4L/DVB (10257): em28xx: Fix for KWorld 330U Board V4L/DVB (10256): em28xx: Fix for KWorld 330U AC97 V4L/DVB (10254): em28xx: Fix audio URB transfer buffer race condition V4L/DVB (10250): cx25840: fix regression: fw not loaded on first use V4L/DVB (10248): v4l-dvb: fix a bunch of compile warnings. V4L/DVB (10243): em28xx: fix compile warning V4L/DVB (10240): Fix obvious swapped names in v4l2_subdev logic V4L/DVB (10233): [PATCH] Terratec Cinergy DT XS Diversity new USB ID (0ccd:0081) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: pxamci: enable DMA for write ops after CMD/RESP pxamci: replace #ifdef CONFIG_PXA27x with if (cpu_is_pxa27x()) ricoh_mmc: Use suspend_late/resume_early mmci: Add support for ST Micro derivate mmc: Add a MX2/MX3 specific SDHC driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: icside: fix PCB version 6 support (v2) tx4939ide: typo fix and minor cleanup ide: add CS5536 host driver (v3) ide: Force VIA IDE legacy interrupts for AmigaOne boards IDE: Unregister and disable devices if initialization fails. ide: fix ide_register_port() failure handling ide: struct device - replace bus_id with dev_name(), dev_set_name() ide-cd: fix DMA for non bio-backed requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: lock rc->rsvs_lock with spin_lock_bh() wusb: timeout when waiting for ASL/PZL updates in whci-hcd uwb: remove unused #include <version.h>'s wusb: return -ENOTCONN when resetting a port with no connected device uwb: safely remove all reservations
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add text file detailing queue/ sysfs files bio.h: If they MUST be inlined, then use __always_inline Fix misleading comment in bio.h block: fix inconsistent parenthesisation of QUEUE_FLAG_DEFAULT block: fix oops in blk_queue_io_stat()
-
由 Mark McLoughlin 提交于
The host really shouldn't be notifying us of config changes before the device status is VIRTIO_CONFIG_S_DRIVER or VIRTIO_CONFIG_S_DRIVER_OK. However, if we do happen to be interrupted while we're not attached to a driver, we really shouldn't oops. Prevent this simply by checking that device->driver is non-NULL before trying to notify the driver of config changes. Problem observed by doing a "set_link virtio.0 down" with QEMU before the net driver had been loaded. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Dumazet 提交于
Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y) is using a lot of memory. Each 'struct module' contains an [NR_CPUS] array of full cache lines. This patch uses existing infrastructure (percpu_modalloc() & percpu_modfree()) to allocate percpu space for the refcount storage. Instead of wasting NR_CPUS*128 bytes (on i386), we now use nr_cpu_ids*sizeof(local_t) bytes. On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce size of module files by about 2 Mbytes. (1Kb per module) Instead of having all refcounters in the same memory node - with TLB misses because of vmalloc() - this new implementation permits to have better NUMA properties, since each CPU will use storage on its preferred node, thanks to percpu storage. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Without this the 2nd port gets first ports MAC addr. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 93821778 (udp: Fix rcv socket locking) accidentally removed sk_drops increments for UDP IPV4 sockets. This field can be used to detect incorrect sizing of socket receive buffers. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Reported by Andrew Walrond <andrew@walrond.org> Changeset c19e654d ("gre: Add netlink interface") added an include of linux/ip.h to linux/if_tunnel.h We can't really let that get exposed to userspace because this conflicts with types defined in netinet/ip.h which userland is almost certainly going to have included either explicitly or implicitly. So guard this include with a __KERNEL__ ifdef. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cliff Brake 提交于
With the PXA270 MMC hardware, there seems to be an issue of data corruption on writes where a 4KB data block is offset by one byte. If we delay enabling the DMA for writes until after the CMD/RESP has finished, the problem seems to be fixed. related to PXA270 Erratum #91 Tested-by: NVernon Sauder <VernonInHand@gmail.com> Signed-off-by: NCliff Brake <cbrake@bec-systems.com> Acked-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Cliff Brake 提交于
Signed-off-by: NCliff Brake <cbrake@bec-systems.com> Acked-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 philipl@overt.org 提交于
If ricoh_mmc suspends before sdhci_pci, it will pull the card out from under the controller, which could leave the system in a very confused state. Using suspend_late/resume_early ensures that sdhci_pci suspends first and resumes second. Signed-off-by: NPhilip Langdale <philipl@overt.org> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Linus Walleij 提交于
This patch adds support for the ST Microelectronics version of the PL180 PrimeCell. They use designer ID 0x80 and have a few alterations/bugfixes related to open drain and HW flow control. They also add some SDIO registers, I am unsure if these are in ST HW only or if this is things also added in later ARM revisions, but they are included in the mmci.h file for completeness. Signed-off-by: NLinus Walleij <linus.walleij@ericsson.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-